Now that unittest.sh is run as part of the automated tests, drop the
various unit test calls scattered throughout the tree.
Change-Id: Iea98314bb7f04620d72d81d25e24f8e706b50ce1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Claim the block devices used by iSCSI LUNs and NVMe-oF subsystems so
they can't accidentally be reused.
This will also be used by virtual block devices to allow layering of
bdevs.
Change-Id: I5384923fbf24f13f4ce720a797c5a628053d49f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
An old prototype SPDK AHCI driver would return
TASK_SET_FULL if all NCQ slots were full on a given
disk. This would kick the SCSI task back to the LUN
to be retried later. Since then, we have pushed
responsibility onto the bdev modules themselves
to handle this kind of queueing/retry logic.
Removing this logic allows us to make some additional
changes that enable tasks to get completed inline without
an extra event callback to handle completion. We also
no longer need to worry about checking if pending tasks
need to be executed in the complete_task() routine, since
the execute() routine will now always exhaust the pending_task
list.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2dc3ab017e0dbc225c8f627e1f87c5a8e9b1e3e
Use 'struct spdk_event *' directly for consistency with the rest of the
API.
Change-Id: Ib41a9bf47f5b18f4aebf5f4dee055455cb12ef7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make it easier to use SPDK libraries by putting them all in a single
directory that can be added with -L rather than scattered around the
source tree.
Change-Id: I5c0f5dd6e7058b5f92fa9bc41548190ffc064761
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than building a configuration file data structure up by hand,
just write the configuration to a temporary file and read it via the
spdk_conf_read() API.
Change-Id: I07b9fefc307fd2e07185c8655f22d6f188425327
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove 4k allocation size in spdk_scsi_task_alloc_data(). From now on
all commands must obay allocation length.
Change-Id: Ica9384c62d431483ae1d0bd2e6fdee18b570861f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This refactor MODE SENSE 6 and 10 related functions to respect buffer
size parameter.
Change-Id: I03bad456bac0554a8bf7b56f69d1f9cf5b1991f6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch is preparation for fixing alloc_len overrun in SENSE 6/10 and
READCAP 6/10. To simplify code forbid usage of iov outside of
scsi/task.c.
This also drop SPDK_SCSI_TASK_ALLOC_BUFFER flag that obfuscate code. As
a replacement assume that if field alloc_len is non zero it mean that
iov.buffer is internally allocated. Functions
spdk_scsi_task_free_data(), spdk_scsi_task_set_data() and
spdk_scsi_task_alloc_data() manage this field.
Change-Id: Ife357a5bc36121f93a4c5d259b9a5a01559e7708
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
The bdev function table should not be part of the public API.
Change-Id: I5d6f40d1b37c4471041c1c9d6253a3f92e9e9701
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Custom bdev modules can return any SCSI status and SCSI sense
information to a host by this patch. This is usefull when a custome bdev
module detect an error in the module and need to return meaningful
information to a host.
This removes the 2 bytes of SenseLength from the beginning of the SCSI
sense_data buffer, so now the offsets within sense.data match up to the
expected values from the SCSI spec.
Change-Id: I9188560096a9ec5a8fcf83bec95201521b127494
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
Where possible (for tests that don't require DPDK), run the unit tests
under Valgrind to check for memory leaks and out-of-bounds accesses.
Change-Id: Ic7b3cdd39a6d59f4e41b4a161be3363f6b076f65
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
The translation code currently cheats a bit - it allocates a full 4KB
buffer for any DATA_IN command that is not a READ, and then the
different SCSI commands that fall into this category (INQUIRY,
READ_CAPACITY, MODE_SENSE, etc.) can write as much data as they
want without having to worry about a buffer overrun. Code higher
up the stack makes sure we only send the correct amount of data back
to the iSCSI initiator.
This patch fixes this behavior for standard INQUIRY (EVPD = 0).
Future patches will fix the behavior for other non-READ DATA_IN
commands, at which point we can remove the 4KB allocation and
only allocate the amount of data specified in the CDB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5e4a10eeba9851e2d91cab71228d2fc2d5baad0
This will be useful outside of the SCSI code, so put it in the common
string utility file.
Also reorder the parameters so they match the order used in strncpy().
Change-Id: I9e25a59b64e4bedf04e5a96de463b1d8aa0ddac3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
