To unregister a bdev more correctly, we had to call
spdk_bdev_open_ext(), spdk_bdev_desc_get_bdev(), spdk_bdev_unregister(),
and then spdk_bdev_close(). This was correct but complicated.
Hence add a new public API spdk_bdev_unregister_by_name() which does
the whole correct sequence of bdev unregistration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9068d4ac49dca944436e0ba587308fd356dfef75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12065
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is done to correctly handle metadata pointer which is part
of ext_opts structure. It will also be used by the next patch to
remove memory_domain pointer if request which uses local buffers
is split
Force the user to set correct ext_opts size, update API functions
description.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I77517d70df34a998d718cc6474fb4c538a42918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for enabling of memory domains
pull/psuh functionality. Since memory domains API is
asynchronous, this patch makes asynchronous operations
with bounce buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ieb1f2a0c151149af58cfd7607dbde4c76c3c288d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
For RDMA transport, adminq will find transport error first because
usually only adminq polls CM events.
Change-Id: I7b22cc8883bf02198f1a90d2654c1de6f2e736e6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If qpair is disconnected asynchronously, it takes time from detecting
transport error to actually disconnected. We should avoid using the
path as soon as possible after detecting any transport error.
Poll group clears I/O path cache if it finds transport error and avoid
using the path which had transport error.
These changes will reduce the failover time.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I00580159a84372a115ed5e62a6ce13eed4368999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ctrlr_disconnect() will be made asynchronous in the
following patches and so we will need to have some changes.
spdk_nvme_ctrlr_disconnect() disconnects adminq and ctrlr synchronously
now.
If spdk_nvme_ctrlr_disconnect() is made asynchronous,
spdk_nvme_ctrlr_process_admin_completions() will complete to disconnect
adminq and ctrlr, and will return -ENXIO only if adminq is disconnected.
However even now spdk_nvme_ctrlr_process_admin_completions() returns
-ENXIO if adminq is disconnected.
So as a preparation, set a callback before calling spdk_nvme_ctrlr_disconnect()
and call the callback if it is set and spdk_nvme_ctrlr_process_admin_completions()
returns -ENXIO.
Besides, fix the return value of bdev_nvme_poll_adminq() in this patch.
Change-Id: I2559f86bb8cf9a92b5b386ed816c00b08c9832df
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10950
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we do when deleting ctrlr_channel, disconnect and then free I/O
qpair in a ctrlr reset sequence.
Deleting ctrlr_channel and resetting ctrlr_channel may cause conflicts.
This patch processes such conflicts correctly.
If destroy_ctrlr_channel_cb() is executed between pending and executing
reset_destroy_qpair(), reset_destroy_qpair() is not executed because
ctrlr_channel is not found. In this case, destroy_qpair_channel()
starts disconnecting qpair and deletes ctrlr_channel. Then
disconnected_qpair_cb() releases a reference to poll group.
If destroy_ctrlr_channel_cb() is excuted between executing reset_destroy_qpair()
and disconnected_qpair_cb(), destroy_ctrlr_channel_cb() skips
ctrlr_channel for a reset sequence.
Change-Id: I1f49f74b94aefbea178680aa53ded3a12876c676
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10766
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment MLX5 uses different number of qp descriptors than the
other pmd crypto drivers. Adding it to vbdev_crypto on init and re-use
everywhere we need it.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea4d4787fc5fd91f27c4a70cf78c5660f09bc854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since IV length is the same for all pmd crypto drivers,
AES_CBC_IV_LENGTH is renamed to IV_LENGTH.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If8769db119eb599a17c267e8950f18f5a0ea995b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11875
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_poll_group has followed spdk_nvme_qpair about how to
process I/O qpair deletion inside of a completion context.
spdk_nvme_qpair_process_completions() accesses qpair after
returning from nvme_transport_qpair_process_completions().
So this is reasonable.
On the other hand, if spdk_nvme_poll_group_process_completions()
can execute spdk_nvme_ctrlr_free_io_qpair() inside of a completion
context, the target qpair is ensured to be deleted after returning
from spdk_nvme_ctrlr_free_io_qpair(). Then the target qpair is
not accessed anymore in spdk_nvme_poll_group_process_completions().
Remove two variables, in_completion_context and num_qpairs_to_delete,
of spdk_nvme_transport_poll_group and the related code.
This change is really necessary to support the following case.
In the NVMe bdev module, a nvme_qpair has a qpair and a poll_group
channel. disconnected_qpair_cb calls spdk_nvme_ctrlr_free_io_qpair()
for the qpair and spdk_put_io_channel() to the poll_group_channel.
spdk_nvme_ctrlr_free_io_qpair() is executed after unwinding stack
but spdk_put_io_channel() is executed now. The callback to
spdk_put_io_channel() calls spdk_nvme_poll_group_destroy(). However,
spdk_nvme_ctrlr_free_io_qpair() is not executed. Hence
spdk_nvme_poll_group_destroy() fails.
Update the corresponding stub in unit test together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd1f1daf049c6c7ffb28790fe87989a1060f8952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11496
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to disconnect qpair asynchronously.
Add nvme_qpair object and move the qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
We want to keep the times of references at I/O path. Change nvme_io_path
to point nvme_qpair instead of nvme_ctrlr_channel, and add
nvme_ctrlr_channel pointer to nvme_qpair.
nvme_ctrlr_channel may be freed earlier than nvme_qpair. nvme_poll_group
lists nvme_qpair instead of nvme_ctrlr_channel and nvme_qpair has a
pointer to nvme_ctrlr.
By using the nvme_ctrlr pointer of the nvme_qpair, a helper function
nvme_ctrlr_channel_get_ctrlr() is not necessary any more. Remove it.
Change-Id: Ib3f579d3441f31b9db7d3844ec56c49e2bb53a5d
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11832
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the following patches, spdk_nvme_ctrlr_disconnect_io_qpair() will
be changed to be asynchronous, spdk_nvme_ctrlr_disconnect_io_qpair()
will be called first and then spdk_nvme_ctrlr_free_io_qpair() after
the qpair is actually disconnected.
We will not be able to keep the current bdev_nvme_destroy_qpair()
function.
As a preparation, inline bdev_nvme_destroy_qpair() and remove it.
Additionally, this patch has the following changes.
Previously I/O qpair was freed and then I/O path caches were cleared.
Both are SPDK thread local. So there is no dependency for the ordering
of these two operations. However, it will reduce the size of the
following patches if we clear I/O path caches before freeing I/O qpair
when the qpair is disconnected. Hence we clear I/O path caches and then
free I/O qpair.
Remove DTRACE for bdev_nvme_destroy_qpair() for now.
It will be restored in the following patches.
Furthermore, fix potential NULL pointer acces in
bdev_nvme_create_qpair().
Change-Id: I0ab78ccb0d240e56b95b53179341afcd909a31f6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10746
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will enable us to specify I/O error resiliency
options per nvme_ctrlr as global options. To do it easier, move
per controller options about I/O error resiliency into struct nvme_ctrlr_opts.
prchk_flags is not exactly for resiliency but move it into struct
nvme_ctrlr_opts too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I85fd1738bb6e293cd804b086ade82274485f213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11829
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib045273238753e16755328805b38569909c8b83a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
- Continue init of the other crypto devices (mlx5) after failure of
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers(). It
simply may not be enabled in DPDK because it requires IPSec_MB>=1.0
installed in the system. Reproduces with --with-dpdk=dpdk/install
option used, when the target DPDK is built without control of IPSec
version from the SPDK side.
- Updated crypto_ut to test the new behavior of error handling from
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers().
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Icd4db8877afe87db8166c40d6e7b414cd43c9c25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11624
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Switched to using rte_mempool for mbufs instead of spdk_mempool. This
allows using rte pkt_mbuf API that properly handles mbuf fields we need
for mlx5 and we don't have to do it manually when sending crypto ops.
- Using rte_mempool *g_mbuf_mp in vbdev crypto ut and added the mocking
API code.
- crypto_ut update to follow pkt_mbuf API rules.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ia5576c672ac2eebb260bfdbb528ddb9edcd8f036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In many cases, addressing bdevs by their UUIDs is often easier than
using their names, which can be somewhat arbitrary. For instance, the
NVMe bdev builds a name by addng the n{NSID} suffix to the controller's
name, while the UUID is filled with NGUID (if available).
The UUID alias is stored in the form defined by RFC 4122, meaning five
groups of lower-case hexadecimal characters. It's important to note
that bdev layer uses case-sensitive name comparison, so the user needs
to use the same textual UUID representation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8b112fb81f29e952459d5f81d97fdc7a591730f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_multi_allocation tries to write four characters, an integer between
0 and INT_MAX, and a nul byte into 10 characters. That requires at least
15 characters.
This leads to build failures with "make CONFIG_DEBUG=n CONFIG_UBSAN=y".
Change-Id: I8cb9fd4ede31ae24809e4a04fd60a67dae3a0ac4
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While not documented as such, spdk_bdev_module_claim_bdev() has always
allowed a bdev that is opened read-only to remain read-only when
claimed. This occurs when NULL is passed in place of an spdk_bdev_desc.
This change updates the function's documentation to match the
implementation and adds a unit test to ensure the current behavior
remains.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ief26de60e4408bfe1aa60b7a4e1d8adf273470b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11267
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch aligns namespace comparison with Linux kernel
implementation:
- UUID is optional and may be NULL
- command set (CSI) should be the same
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I8f889989f24cd51b104057217f87eb303b30fa68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11312
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the same effort as the last patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I94ef08abdbb2bd2e07d0cd1e552c5d05c805233e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
More precise stubs for spdk_nvme_poll_group are critically important
to verify upcoming changes.
Add a flag is_failed to struct spdk_nvme_qpair separately from
is_connected. This is used to inject error to a connection.
Replace a single list qpairs by two lists, connected_qpairs and
disconnected_qpairs for struct spdk_nvme_poll_group.
Then utilize these to manage qpair in poll group.
spdk_nvme_ctrlr_reconnect_io_qpair() is not used in the NVMe bdev
module now. Remove the corresponding stub.
Adjust polling count accordingly.
Change-Id: I4d867c56ae518276813f6f96d23a5f6933364fd4
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10816
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
We noticed the difference between the SPDK 21.10 and the latest master
in a test.
The simplified scenario is as follows:
1. Start SPDK NVMe-oF target
2. Run bdevperf for the target with -f parameter to suppress exit
on failure.
3. Kill the target after I/O started.
With the SPDK 21.10, bdevperf retries failed I/Os and exits after
the test time is over.
With the latest SPDK master, bdevperf hungs and does not exit even
after the test time is over.
The cause was as follows:
reset ctrlr is repeated very quickly (once per 10ms by default) and hence
I/Os were queued infinitely because nvme_io_path_is_failed() returned
false if nvme_ctrlr is resetting.
We should queue I/O when nvme_ctrlr is resetting only if reset is throttoled
and fail-fast for the repeated failures is supported.
Hence in this patch, fix the degradation and remove the related unit
test cases.
Reported-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4047d42dc44488a05264c6a841d101a7c371358b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11062
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We sort secondary trids to avoid using disconnected trids for failover.
However the sort had a bug.
This bug was found by running test/nvmf/host/multipath.sh in a loop.
Verify the fix by adding unit test.
Fixes#2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I22b0ede4d2ef98b786c3e0d1f5337a2d568ba56d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The failover_in_progress flag is used to decide the return value of
bdev_nvme_failover().
bdev_nvme_delete() calls bdev_nvme_failover() with remove=true to remove
nvme_ctrlr->active_path_id. However bdev_nvme_failover() returns zero
if nvme_ctrlr->failover_in_progress is true. bdev_nvme_failover() may
return zero even if it does not remove nvme_ctrlr->active_path_id.
The following will be better.
bdev_nvme_failover() returns -EBUSY if nvme_ctrlr->resetting is true,
and the caller repeats calling bdev_nvme_failover() until the target trid
becomes alternative path or bdev_nvme_failover() returns zero.
To do that, the failover_in_progress flag is not necessary any more.
Removing the failover_in_progress will also simplify the following
patches to unify ctrlr reset and failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ab944beb1d06ea4def144c81c69705860de35f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not checked the bit 0 of the Namespace Multipath I/O and
Namespace Sharing Capabilities (NMIC) field in the Identify Namespace
data structure.
If the bit 0 of the NMIC is zero, it is likely that namespaces are not
identical.
We should check if the value of the NMIC first, and do it in this patch.
Additionally, it is not usual if the bit 0 of the CMIC and the bit 0 of
the NMIC do not match. So in unit tests rename the parameter multi_ctrlr
by multipath for ut_attach_ctrlr() and use it for the value of the NMIC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6aa7cbcc99be2507dbf18930f7b585a9ea7d0f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch supports admin passthrough retry when we get any error
with DNR=0 but ABORTED_BY_REQUEST up to retry_count times.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bf29570791fdbe8651fa70c4c8685bb740fb86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When resetting ctrlr, adminq is disconnected first. If adminq is disconnected,
admin passthrough request is rejected with -ENXIO.
But resetting ctrlr may succeed. If resetting ctrlr succeeds, adminq is
connected again, and admin passthrough request will be
submitted successfully.
On the other hand, if ctrlr is failed, admin passthrough request is
rejected with -ENXIO. But when resetting ctrlr, ctrlr is set to unfailed.
Hence bdev_nvme_admin_passthru() skips any ctrlr which is resetting
or failed, and calls bdev_nvme_admin_passthru_complete() with -ENXIO
if no available ctrlr is found.
bdev_nvme_admin_passthru_complete() queues admin passthrough request
and retry it one second later if ctrlr is resetting.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic748dc4faf29ebf717ae5c29dcf7c55fe2ea9243
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9942
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe bdev module queues retried I/Os itself now.
bdev_nvme_abort() needs to check and abort the target I/O if it
is queued for retry.
This change will cover admin passthrough requests too because they
will be queued on the same thread as their callers and the public
API spdk_bdev_reset() requires to be submitted on the same thread
as the target I/O or admin passthrough requests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If37e8188bd3875805cef436437439220698124b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After multipath feature is supported, one bdev will have more than one
nvme ctrlr. Fore ease of view, display each ctrlr's trid info.
Moreover, rename nvme_bdev_ctrlr_get as nvme_bdev_ctrlr_get_by_name here
to keep consistent with nvme_ctrlr_get_by_name.
Signed-off-by: Kai Li <lik271@chinatelecom.cn>
Change-Id: I417506699bbea6ed13dac0fee942749757d2ae47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10129
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
verify_io() keeps track of a buf pointer, but the
buf pointer never actually gets used. So remove
this buf pointer.
Found by clang-13.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dfeac7f004b56f7d4404f41b2ff18b96968a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10056
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If I/O got ANA error, ANA state may be out of date. So in this case
read ANA log page and update ANA states. Mark nvme_ns to be updating
to avoid using while updating ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43d38b3a589c84d6d0479dedcced033e76fb194
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
