spdk/nvmecli git index happens to be corrupted and
results in a lot of unrelated failures in the CI.
This patch attempts only to mitigate the issue of
unwanted failures by restoring nvmecli repository
to clean state.
Fixes#1496
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic17bffb0bc5bd3222c9f395fb217d2ffae99ceb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
VPP is going to be deprecated in 20.07, thus remove support for it
from vm_setup.sh.
Change-Id: Ic5891178bc439ff08475adbb2925b81c4a33525f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3199
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using hardcoded path of /tmp/spdk was a bit problematic due to the
way how CI mixes root permissions with non-root's during test
execution. As an example, see:
https://review.spdk.io/gerrit/c/spdk/spdk/+/2560
Instead of using /tmp/spdk as a fallback, always try to create tmp
directory by generating its path via mktemp(). This way, as with
"autobuild: Use mktemp() for spdk workspace (ae730042)", different
permissions shouldn't be an issue anymore.
Lingering tmp directories will be purge at each set_test_storage()
run.
Change-Id: I93bc60c97b68e66606e98fc83463074fc020e372
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3238
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Accidentally, checkout command was included in said path, remove it.
Change-Id: I3d497b90552ddcc14be4a45b8794f79e185cfb9f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Usual way to call get_nvme_bdfs() is to iterate over resulting bdfs.
When no bdfs are returned, most of the scripts do no not execute tests
at all and assume success.
Instead of adding error checking for each and every script for no bdfs,
this patch makes get_nvme_bdfs() exit with test failure.
This assumes that there will never be a test that expects no devices
to be present.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e41a885c76ce6cc248fb076bc4f4efd4695ff3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Only spdk/nvme-cli fork with spdk-1.6 branch is supported.
Even then this will be deprecated at some point in the future,
in favor of nvme-cuse.
This came up when fixing the tests to actually run.
If unsupported nvme-cli is used, compilation succeeds and tests
fail at the functional test part with non-obvious message :
# ./nvme id-ctrl 0000:84:00.0
0000:84:00.0: No such file or directory
Some of the CI machines need to be updated, but this
check will make it easier to gauge what went wrong.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia19121a6c49b9618b8fea9e13304e27089f13dcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
NVMe tests compiled the nvme-cli, but turns out that
NVMe-oF did not. This patch moves compilation to
common script. Meanwhile next one will use it in other tests.
Additionally return to the original directories with
pushd & popd.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica60775a9b8e4347bed28d4c9dfae1acab2cae9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tests should always have a reference to $rootdir absolute path.
Before this change, result of this function depended on current
working directory.
Test like test/nvme/spdk_nvme_cli.sh where directory was changed,
would fail.
With this change the path to get_nvme.sh script should always be
correct.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id555188f032e179eedd406463446a85e13234b6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2936
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It is possible to have yum on Fedora (either manual install
or via upgrade), yet dnf is the default pkg manager there.
Re-order the list of checks to pick dnf first if available.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48dfda2a248a7798c9d0c8b3cb4b8a3aa615e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Exit early from script execution when unsupported pkg manager is found.
Just not before the "--help" has a chance to be called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I176bf5778dd7b2bc510f54842202113c8614a9d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3054
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When trying to find out parameters through "--help",
the $PACKAGEMNG is "undefined".
So the output from help does not make sense.
Change it so that the help message uses $package_manager that
was detected.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7ac47dec810588dfa01441b35204a7bf13280ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3049
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The 65b8c30d meant to use exec as a mean to "reload" the running
shell, however, exec simply replaces running bin image with a new
one, in this case, another shell. Since this call doesn't return
(unless it fails) this would suddenly leave the caller of the
vm_setup.sh inside the interactive shell.
Instead of re-executing the shell, simply export new PATH pointing
at where new git binary should reside.
Change-Id: I9ab5ba7f8f88602160c8be0f017477e0d1a01c08
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This mainly concerns QEMU compilation. For system which have installed
tsocks, vm_setup.sh always tries to pass --with-git to QEMU's configure
even when tsocks is not really used (it determines that based on $CONF
which by default has tsocks enabled and presence of the tsocks binary).
Since in that scenario qemu compilation would simply fail, allow user
to force vm_setup.sh into simply ignoring tsocks alltogether.
This is an alternative for a change which potentially could break the
compatibility by removing tsocks from default $CONF list (I guess there
may be some systems out there that relay on tsocks and its default setup
in the $CONF).
Change-Id: Id3583357878002c79e1a554df664c297a0e39cb3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Since most of the sources are executed in a background, there's a
race happening between different instances of package maangers
which are called to install extra packages (for QAT and QEMU).
This mainly concerns apt-get which will not wait for locks on
given files to be released, it simply exits when they are still
held.
To avoid this, simply install all the extra packages from a separate
function before calling routine for a given source.
Running these builds in a background is still not safe in that regard,
since code of the actual source may want to perform a similar tasks,
however, this patch should at least mitigate the issue in its current
form.
Change-Id: Iede83793e1cc739cd3bc5dd4dee90f9c81d55f63
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In case vm_setup.sh is called on a bare system (e.g. cloud image), it
will instantly fail since gcc won't be on board, forcing user to either
install it by itself or by running our pkgdep.sh first.
Moving this check to pkgdep/git will mitigate similar issues since
before it's sourced, an $INSTALL portion of the script will have a
chance to run pkgdep.sh on its own (this still depends on user running
vm_setup.sh with -i arg, but still ;)).
Change-Id: I309ca42e8ea15fd14e416fc85fa0e244de2d8262
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Make sure that environment is preserved for each call to sudo to, e.g.
make sure proxy configuration is not lost when executing given package
manager.
Change-Id: If221d8d6546fc0ae4f02bc5814b6688c6d78cdd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Allow to specify a target place for all the git sources and use it
as a full path (instead of cding directly into $HOME). $HOME is
still kept as a default.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idb60ff8f8108368de2ac241971d221142198c89a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2528
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I59030c4570a03f8c6dfcf4a5f86426e3b5875744
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Perform it inside the a copy instead.
Also, don't copy the repo if target directory already exists.
Change-Id: Icdff80c978c7a8998b113db27bf744503bb29d0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to not taint the rest of the environment with
autotest settings.
Change-Id: Iad31096aa29d4893200e64c77f2cf22663f0dfc7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2524
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If for any reason the cuse tests do not revert state
of NVMe namespaces to the original state, the test
machines would be stuck in until manual intervention.
Assumed default state is single namespace,
encompassing available space formatted as 4k block size.
This patch adds nvme_namespace_revert(), which
searches for NVMe devices that support Namespace Managment
and have some space unallocated.
When such device is found, all existing namespaces are removed
and single one created.
Fix#1435
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc3b04b3f166bf450b884674fa6a482e2fbc4c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2829
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case when no device supporting Namespace Managment was found,
the test case exits without producing an error.
For example QEMU NVMe emulated device does not support it, thus
only physical devices have to be used right now.
This goes against design of "run_test" function, that when executed
should always run and never silently skip.
This patch adds check whether there is a device support and triggers
the test case only then.
Note that original code for selecting the device is still in original
script. This is to enable running nvme_ns_manage_cuse.sh on its own.
Right now CUSE tests are only enabled on VMs so nvme_ns_manage_cuse,
was added to exception list.
This will soon be reverted as the tests are moved to job that
runs on physical machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie784696c2628b5fe45ce751b3978abcc03118cd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2828
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In SPDK 20.07 will be deprecated, this means that CI
will no longer build or test the VPP component.
With SPDK 20.10 VPP the implementation and test scripts
will be removed.
autorun_post.py processes all run_test instances to
verify that they were executed. Since CI will skip
VPP tests, it needs to be added to list of exceptions.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I06c76643e6189d32471d9f53a0987e52f167844b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
'make clean' can't remove compiled file in virtio_user directory.
So I move vhost_user.c into lib/virtio directory and fix it.
Change-Id: Ic7d41709d3a5d6cf2333c4deee285800b414a3fb
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2750
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The selected options are based on how CI runs the make test.
Change-Id: I71d7bc13250f0f4b5212eff4d13794979bcd4b6d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are two or more Nvme SSDs in system, $bdf includes many bdfs.
Function get_first_nvme_bdf() have no effect on local phy servers.
nvme_rpc.sh will report error as below.
09:16:06 # /home//spdk/scripts/rpc.py bdev_nvme_attach_controller -b Nvme0 -t PCIe -a 0000:03:00.0 0000:04:00.0
usage: rpc.py [options]
rpc.py: error: unrecognized arguments: 0000:04:00.0
Change-Id: I91be02b874fcc4ee4626c082b16d06e722797744
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
