This patch introduces indirection layer for session management
functions that makes it possible to switch their underlying implementation
if we want to (in unit tests for example).
Change-Id: I563c97bc65d55cc42fecbd1b7eb6679e394784a2
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change will allow us to move other DPDK specific functions
to rte_vhost_compat.c, such as session callbacks which are
the only consumers of these memory management functions.
Change-Id: Ieb7b3f08ddf2e7cf04ecf18e8af4ad04124ccfea
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move FLOOR_2MB() and CEIL_2MB() definitions to spdk_internal/memory.h
because that is where common memory functions are located.
Change-Id: I0d366686f86520e5564be07254d98a579faa3650
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make them accept a struct rte_vhost_memory * param
instead of a full spdk session object.
Change-Id: Ibe12f29146d2e971ef58fd5f7366cb059123224d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Change type of `vhost_stop_device_cb()` and `vhost_destroy_connection_cb()`
to return response code instead of "void".
While DPDK callbacks `stop_device()` and `destroy_connection()`
do not have response code, it does make sense to have them in
our VHOST wrappers because those actions can fail.
Practical benefit we get by adopting this change is that we can
now use high level `vhost_stop_device_cb()` and `vhost_destroy_connection_cb()`
in unittests and check if they succeeded or not.
Change-Id: I2cd1886728b1edce7946e87db7ca0ac435e83a41
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will allow us to write some more interesting unit tests
because we can now mock high level callbacks instead of
low level DPDK API and also, in future, we won't have to deal with sem_wait()
in our mocked implementation since it's a DPDK specific thing.
Change-Id: I9ed5cff216e750685c00e718025ff1802fbe32c8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rte_vhost_compat.c will now not only handle vhost-user
messages over the unix domain socket, but also setup
that unix domain socket with rte_vhost's APIs.
What was previously called vhost_dev_install_rte_compat_hooks()
is now called vhost_register_unix_socket() and is responsible
for creating the entire unix domain socket.
This enables us to write more advanced unit tests for vhost.
Instead of mocking low-level rte_vhost APIs, we could
now potentially mock vhost_register_unix_socket() and
create vhost devices and sessions without any actual
unix domain sockets involved.
Change-Id: Ifb18b92b37915c3f683b6d4fcdcc9259a3770561
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to call rte_vhost_driver_start() under
spdk_call_unaffinitized() because that function could
spawn a new pthread and we didn't want to to be pinned
to the one single cpu of the current SPDK reactor.
New DPDK versions (>= 19.05) already unaffinitize the
pthread by themselves, so our spdk_call_unaffinitized()
was only required for the legacy, internal rte_vhost fork
in SPDK. To clean up SPDK code, move the un-affinitization
down to the rte_vhost fork.
Change-Id: I53836517e9ec2ff366b509f00e1403845e3c3172
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We'll start using the same code in even more places soon,
so put in a function.
Change-Id: Iee2e091009b14e9d8b56ec8f0d4a86094f7c9727
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467229
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Threads were assigned to sessions inside
vhost_session_send_event() so far, but even the doxygen
comments say that sessions would be assigned to the thread
which called vhost_session_start_done(). Currently, Vhost
uses only vhost_session_send_event() to schedule starting
the session on some thread, so the code ends up working.
We're about to remove vhost_session_send_event(), so move
the thread (poll group) assignment to start_done().
While here, publish the vhost_poll_group struct definition
via vhost_internal.h. As a replacement for
vhost_session_send_event() we would like to use
spdk_thread_send_msg() which a requires a thread object -
one of the struct fields inside vhost_poll_group.
The code for starting a session could look as follows:
pg = vhost_get_poll_group(cpumask);
spdk_thread_send_msg(pg->thread, cb);
...
cb:
// start_pollers
vhost_session_start_done(0);
Change-Id: I563f61509674768c1dea0b03767e9f39a9fb0069
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
We used to call a dpdk function to do it, but using
a function for something that simple doesn't make sense.
The function also does its internal queue lookup by vid
and queue number, which could potentially fail, return an
error and technically require SPDK to handle it.
The function makes some sense for vhost-net applications
which don't touch vrings directly but rely on rte_vhost's
API for enqueueing/dequeuing mbufs. SPDK touches DPDK's
rings directly for the entire I/O handling, so it might
just as well for initialization.
This serves as cleanup.
Change-Id: Ifb44fa22ea5fc3633aa85f075aa1a5cd02f5423c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the way we increase poll group reference counts
for round-robin scheduling.
So far we used to increase them whenever someone called
vhost_get_poll_group() and this worked fine for Vhost-Block
which picks a new poll group for each session. Vhost-SCSI,
however, picks only one poll group for all sessions on
a vhost device. This means that some threads will have
multiple Vhost-SCSI pollers but will still appear to the
vhost scheduler as if they had only one.
To fix it, increase poll group refcnt only when sessions
are really being started - in vhost_session_start_done().
Change-Id: I60f0d2101239e5a91138a5afd30c51dc1ccf7c2e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently vhost_dev_foreach_session() accepts a single
callback function for both iterating through all active
sessions and for signaling the end of iteration (called
last time with vsession param == NULL). Now that the
final signal has completely different semantics and is
called on a specific thread, it makes sense to put it in
a separate function.
While here, remove the one-line description of
spdk_vhost_session_fn typepef. It wasn't helpful anyway.
Change-Id: I56b97180110874a813e666f964bb51c39a8ce6bb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Historically the callbacks from vhost_dev_foreach_session()
could be called with vdev argument == NULL, which would
mean that device was removed after enqueuing the event
and before consuming it. Now we keep track of pending
asynchronous operations on each vhost device and don't
allow removing it if there are any unconsumed events,
so the the vdev == NULL checks are redundant. Remove them.
Change-Id: I7aa3785080d20ed06e008c081d3f37a949228f5a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove them all at once. spdk_ prefix should be
only applied to publicly exported functions.
Change-Id: Ib6d2bd0954ec5cb7c8cf253d79b9d3cd8aa0eeef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We currently don't have any way to differentiate different
sessions e.g. in error messages. Whenever there's an error
in some session, we just print the device name.
We now introduce vsession->name with the following format:
<device name>s<dpdk connection id>
Note that it's still impossible to know exactly which
qemu process corresponds to which session in spdk, but
there's not much we could do in that matter right now.
In spdk we don't even have the accepted connection fd.
Change-Id: I666aa60c5e36bf3d56f68133042af2afc8cc5e85
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466039
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We've recently switched from manually calling eventfd_write()
to rte_vhost_vring_call(), which besides writing to the
eventfd, always calls a full memory barrier in the upstream
rte_vhost lib. With upstream rte_vhost we're actually
calling two memory barriers on I/O completion - one in
spdk code, one inside rte_vhost_vring_call().
The spdk barrier was only required for our internal rte_vhost
lib, whose rte_vhost_vring_call() implementation (that we
wrote) did not have such membarrier inside. So now we'll
add this membarrier there, and remove the same barrier
from spdk code.
This doesn't change any code flow for the internal rte_vhost
lib, but optimizes I/O path for the upstream version.
Change-Id: I68738d7feb9159f718b0e60ac7eed1fafd4836b9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466037
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We used to allocate a ctx whenever new event had to
be sent, but since all events in foreach_session are
always called in a chain, we could allocate one ctx
at the start and then re-initialize it before sending
each msg.
Change-Id: Ie5477b07242f0c6eb6dc2160055a829da8ba5d11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
foreach_session() is used to e.g. close a bdev, where
for each session we close any io_channels and then,
on the final "finish" call, close the bdev descriptor.
The vhost init thread is the one that called
spdk_vhost_init() and also the same one that calls
all management APIs. One of those is for hotplugging
LUNs to vhost scsi targets, which practically results
in opening bdev descriptors.
By always scheduling that final foreach_session()
callback to the init thread, we end up with calling
spdk_bdev_close() always on the same thread which
called spdk_bdev_open(), which is actually a bdev
layer requirement.
Change-Id: I2338e15c63f93ef37dd4412dd677dee40d272ec2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to call potentially-asynchronous foreach_session()
in vdev initialization path and that was perfectly
fine because at that time there were no sessions created
and foreach_session() was always finishing synchronously.
We're about to refactor it to be always asynchronous, and
for this coalescing case it could complicate the init
error path. Once asynchronous thread msg is sent, we would
need to wait for it to complete and we just don't want to
do that. We want error handling to be simple.
Since we know there are no sessions at the time of vdev
creation, we just add a new function for setting coalescing
params just for vdev (and not for its sessions) and we
use that function in vdev init code.
Change-Id: I44d204d03b5040525e4871693678d4b4a0204e63
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ic621855b028f9bd110cdcda86b3a182369ec5e90
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ieafd91c6cfefec134594aec8671eb4efdac15dfe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459164
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_ prefix should be only used on public API functions.
Change-Id: I663b107bd6b1c92c2c6263f2ec7c763d9812e7fe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459163
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Despite its name, this function is defined as static
and is only used in one place, so inline it.
Change-Id: I4e217b3baae9b735761f5497f06b681a118860e9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459162
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The semaphore was a part of struct spdk_vhost_session_fn_ctx
so far, but since there's only one pthread waiting on that
semaphore and hence only one event using it, we could just
use a single global sem_t. Same thing with response code
for those callbacks - there's only one needed.
Going a step further, the function complete_session_event()
was removed - it would only operate on global variables now,
and its signature wouldn't make much sense after this
refactor, so it's been inlined.
This serves as cleanup.
Change-Id: I63ef41d7e1564fff5e785de101d887bc1014aad9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459160
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enforce spdk_vhost_fini() to be called on the same
thread which called spdk_vhost_init(). We'll also use
the newly added g_vhost_init_thread for other purposes
later on.
Change-Id: I99aebeda2d8ddaf42554aa422c32ed935634595f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With all the pieces in place we can finally remove
the legacy cross thread messages from vhost.
We replace spdk_vhost_allocate_reactor() with
spdk_vhost_get_poll_group(). The returned poll_group
has to be passed to spdk_vhost_session_send_event(),
where it will be assigned to the session. After the
session it started, that poll group will be used for
all the internal vhost cross-thread messaging.
Change-Id: I17f13d3cc6e2b64e4b614c3ceb1eddb31056669b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
rte_vhost_vring_call() from upstream DPDK can read some
unitialized memory and crash if it's called on invalid
queue ids. The implementation in our internal rte_vhost
fork ends up wiritng to a random descriptor number, which
doesn't cause any crashes but is a bug nevertheless.
To fix it, just check if the queue is initialized before
interrupting it during the session start. It's not a hot
I/O path and there's no performance impact.
Change-Id: I830c1be98ef00d4ece9a6bd88cf79b9dfe29d2a9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457247
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The memory API has been refactored. It is not possible anymore to
register a memory region more than once. This has been introduced in
this patch: https://review.gerrithub.io/426085
In case of vhost with vvu transport, it often happens that two
consequtive vhost memory regions are mapped to virtual addresses that
lie within the same 2MB address range. This means that the vhost memory
regions may not be 2MB-aligned in the process virtual address space. As
a result, the `FLOOR_2MB()` of those addresses gives the same address.
Thus, we end up trying to register the same 2MB memory range twice.
This issue does not appear in case of AF_UNIX transport. Vhost memory
regions in case of AF_UNIX transport are hugepage backed. Therefore, the
mmapped virtual addresses of those memory regions are always
2MB-aligned. On the contrary, in case of vvu transport, the vhost memory
regions are segments of the PCI memory address space of the
virtio-vhost-user PCI device. This MMIO space is mapped in its entirety
by the DPDK vfio interface along with the other PCI BARs. Ultimately,
the vhost memory regions correspond to offsets in this mmapped PCI
memory region and thus there is no warranty that the mmapped virtual
addresses are 2MB-aligned.
This issue is fixed by skipping the already-registered 2MB memory
regions.
Change-Id: I62c9c257e6f172c894cd3454d2cbeee1986e6189
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/441057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
vring notification mechanism is transport-specific. At present, vhost
dataplane code in `lib/vhost/vhost.c` triggers guest notifications with
`eventfd_write()` system call. But this is an AF_UNIX specific
notification mechanism. This patch replaces `eventfd_write()` with the
existing generic `rte_vhost_vring_call()` function that is part of
DPDK's librte_vhost public API.
`rte_vhost_vring_call()` takes a vring_idx as an argument to associate
the `struct spdk_vhost_virtqueue` instance with the relevant `struct
vhost_virtqueue` instance. We introduce a new `vring_idx` field in
`struct spdk_vhost_virtqueue` to enable this association. This field is
initialized in `start_device()`. In addition, a stub for
`rte_vhost_vring_call()` is added in the vhost unit test file.
SPDK's internal `rte_vhost` copy will not be updated in order to support
the virtio-vhost-user transport. However, an `rte_vhost_vring_call()`
function is introduced in SPDK's `rte_vhost` in order to have a solid
API. This function is just a wrapper of `eventfd_write()`.
Change-Id: Ic93e25cd3f06e92f04766521bc850f1ee80b8ec8
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We no longer have any assumptions about vhost memory regions
size being a 2MB multiple, so we can get rid of the security
check preventing some vhost sessions from being initialized.
It will be necessary for virtio-vhost-user, whose memory comes
from PCI BARs and its size may not be a 2MB multiple.
Change-Id: I48f9bc20f4c61aefdddf39ade875867148f0ed75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, we translate each 2MB chunk to manually check
if it's contiguous with the previous one, but there are
rte_vhost APIs that do it way more efficiently.
rte_vhost_va_from_guest_pa() was introduced in DPDK 18.02,
but was backported to 17.11 as well, so we don't even need
any RTE_VERSION ifdefs to use it now. This function
calculates the remaining region size instead of trying to
translate subsequent 2MB chunks over and over.
The previous rte_vhost_gpa_to_vva() was deprecated a long
time ago and after this patch we no longer make any use of
it.
DPDK usages of this new function check if the translated
memory region has 0 length, which seems very silly, but
let's just do it in SPDK as well.
Change-Id: Ifae8daa5f810b5a2ba1524958ad2399af700b532
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454878
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now that sessions have a separate flag to check if the
pollers are started, we can set the lcore field on any
thread we want. We currently assign it from within the
session thread to spdk_env_get_current_core(), but we
won't be able to use an equivalent get_current_poll_group()
function after we switch to poll groups. We will only
have a poll group object inside spdk_vhost_session_send_event(),
so that's where we move the lcore assignment for now.
Change-Id: Ib5fb37ec488de80e9d79432120c81500c297b608
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to rely on lcore >= 0 for sessions that are
started (have their pollers running) and in order to
prevent data races, that lcore field had to be set from
the same thread that runs the pollers, directly after
registering/unregistering them. The lcore was always
set to spdk_env_get_current_core(), but we won't be able
to use an equivalent get_current_poll_group() function
after we switch to poll groups. We will have a poll group
object only inside spdk_vhost_session_send_event() that's
called from the DPDK rte_vhost thread.
In order to change the lcore field (or a poll group one)
from spdk_vhost_session_send_event(), we'll need a separate
field to maintain the started/stopped status that's only
going to be modified from the session's thread.
Change-Id: Idb09cae3c4715eebb20282aad203987b26be707b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Prepare to switch to spdk_thread_send_msg() which
accepts only one context parameter.
Change-Id: Iea3e8d1e715957d9b3fea12e969f29084a2948dc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The goal is to remove legacy event messages from vhost.
The new message passing API accepts thread objects instead
of lcore numbers and poll groups are meant to simplify
the transition.
Eventually we'd like vhost to spawn its own threads and
do message passing only within those, but SPDK libraries
can't spawn their own threads just yet. As a stopgap, vhost
will now maintain a list of all available threads (in form
of "poll groups" to mimic nvmf) and will start pollers on
them using its own round robin scheduler.
This patch only adds the poll groups list, it doesn't
change any existing functionality.
Change-Id: I89cc5da5df3612827c6fc9015f03c94b5f4a10ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepare vhost lib init to be asynchronous. We'll need
it for setting up the upcoming poll groups.
Change-Id: I3c66b3f17f8635d4b705dd988393431193938971
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put all shutdown functions in a single place. This also
lets us remove one forward declaration.
Change-Id: I8c8c602e67e3dafd3cd5e80bc9dd90f23381711e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Switch to the new spdk_thread_send_msg() API instead.
Change-Id: I810465cc49d5c4ef23e04953aa29d369f48f68b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_malloc() is not required here, as the device
object is neither DMA-able nor shared between processes.
The device structures used to be aligned to cache line
size, but that's just a leftover from before sessions
were introduced. The device object is just a generic
device information that can be accessed from any thread
holding the proper mutex. The hot data used in the I/O
path sits in the session structure, which is now allocated
with posix_memalloc() to ensure proper alignment.
Vhost NVMe is an exception, as the device struct is used
as hot I/O data for the one and only session it supports,
so it's also allocated with posix_memalloc().
While here, also allocate various vhost buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic7f63185639b7b98dc1ef756166c826a0af87b44
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous patches described as optimizations also
fixed some issues. They seem sufficient to cover all
the error cases, but the real source of the problem
lies in foreach_session() initiated by the device backend,
which can use sessions that were never seen by the
backend.
The backends are only notified when a session is
*started*, but foreach_session() iterates through
all the sessions - even those that were never started.
Vhost SCSI, for example, in the foreach_session() callbacks
used to expect svsession->svdev to be always set, but
that field is only set when the session gets started.
A perfect solution would to introduce a new backend
callback to be called on new connection. Vhost SCSI
could set e.g. svsession->svdev inside. For now we go
with much easier solution that prevents sessions from
being used in foreach-session() unless they were
started at least once. (...and e.g. got their ->svdev set)
Change-Id: Ida30a1f27f99977360d08a71a64fc92931b25b75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449394
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is currently a small window after we stop
session's pollers and before we mark the session
as stopped (by setting vsession->lcore to -1). If
spdk_vhost_dev_foreach_session() is called within
this window, its callback could assume the session
is still running and for example in vhost scsi
target hotremove case, could destroy an io_channel
for the second time - as it'd first done when the
session was stopped. That's a bug.
A similar case exists for session start.
We fix the above by setting vsession->lcore directly
after starting or stopping the session, hence
eliminating the possible window for data races.
This has a few implications:
* spdk_vhost_session_send_event() called before
session start can't operate on vsession->lcore,
so it needs to be provided with the lcore as
an additional parameter now.
* the vsession->lcore can't be accessed until
spdk_vhost_session_start_done() is called, so
its existing usages were replaced with
spdk_env_get_current_core()
* active_session_num is decremented right after
spdk_vhost_session_stop_done() is called and
before spdk_vhost_session_send_event() returns,
so some active_session_num == 1 checks meaning
"the last session gets stopped now" needed to be
changed to check against == 0, as if "the last
session has been just stopped"
Change-Id: I5781bb0ce247425130c9672e0df27d06b6234317
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Split spdk_vhost_session_event_done() into two separate
functions. This is just a preparation for the next patch.
Change-Id: I05e046e4b963387f058d2b822d7493c761eebbbb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the next patch we will put much more responsibility
on spdk_vhost_session_event_done(), so here we make
sure it's always called under the global vhost mutex.
Specifically, spdk_vhost_session_event_done() will set
vsession->lcore, which any other thread might try to
concurrently access via spdk_vhost_dev_foreach_session().
Change-Id: I7a5fde4be4e8bdfdbbb24ac955af964f516bdb68
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We'll make use of it inside the vhost device backend
code. The function itself is generic enough to be put
in the public vhost.h header rather than vhost_internal.h.
Change-Id: I60602c61d8bba665dcf9c6d27af2e910c208a7be
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448226
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The context had to be previously carried around by
particular vhost backend code and now it's embedded
inside the generic vsession struct. This serves mostly
as a cleanup.
Change-Id: I7b6ac2c3cb5d60a035d56affbf42fe5d4697f0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Nothing actually needs this to be asynchronous. If something
comes up, we can make it asynchronous again.
Change-Id: Icde3af3f8f9efebe75b08471b4afcce3a70da541
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
