Use a lookup table with function pointers to build
the request depending on the payload type and SGL support.
This change helps to remove several if/else branches
Change-Id: I506e4290efc218be68fc8cfda4835b242a99aa77
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Command with cns SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST is issued during
controller initialization and if the controller supports SGL,
this command will be built as a contig SGL. This leads
to a failed completion with the following status:
INVALID FIELD (00/02) sqid:0 cid:95 cdw0:0 sqhd:0004 p:1 m:0 dnr:0
The first identify command SPDK_NVME_IDENTIFY_CTRLR passed since
it was built as a PRP command - we didn't know that the controller
supported SGL at that time. Fix - do not build SGL requests
for admin qpair
Change-Id: I72ab7fe33c03e60ea9f20a9c8afd7c79c40843aa
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To avoid the hang if there is no response
from the target.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib68a9e4c1a28436af2b2ae65891de04067e3dc7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To address the error message:
SPDK_ERRLOG("Unable to resubmit as many requests as we completed.\n");
Reason: The "reaped" variable is used to caculate the free slots
of rdma_reqs after calling the nvme_transport_qpair_process_completions.
And we should correctly caculate the free slots when the rdma_req is
really put.
If we caculate the slots more than we will have, we will trigger
the error print described above.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I269bdb63646eee6444d340b904882736c4cbca36
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
mapping length is initialized with 0 and spdk_vtophys() returns
min(*mapping_length, cur_size) or 0. So length -= mapping_length has no
effect and req will be failed when nseg reaches NVME_MAX_SGL_DESCRIPTORS
Initialize mapping_length = request length
Change-Id: I9082866b7f8055d99fa6930a78335b3b0fdf9b2b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477575
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Some version of firmware on Intel SSDs exhibit poor performance
with an IO queue size of 256 (the SPDK default). Add a quirk to
account for this - and use the same size as the Linux driver (1024)
instead.
If the user specified a controller option to explicitly set the
io_queue_size different than the default, the quirk will not take
effect. Note that users can still override the io_queue_size when
creating the qpair - this only changes the ctrlr's default
io_queue_size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff0f7ab9856fc18f226f7171e5109bb8fe430969
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/432227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, invalid io_flags would results in -ENOMEM being
returned to the user which was incorrect.
Change-Id: I53dd0fa8684cb36f3d124baa92244e2ed30e2527
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476938
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The hardware sgl format can describe large contiguous
buffers using just a single element, so it's more
efficient that a prp list even for a single memory
segment. Always use the sgl format.
Change-Id: I9c62582829f0d64dcd1babdbc48930ddb4d9e626
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch attempts to solve naming conflict between
CUSE devices created by different SPDK instances.
Each NVMe device is enumerated by SPDK process from 0
up to 127. When process attempts to start cuse device
tries to set exclusive lock on temporary file
"/tmp/spdk_nvme_cuse_lock_<index>" and keep it until
device will be stopped.
If setting lock fails, index is incremented.
It prevents to use the same controller index from
few SPDK instances.
Change-Id: If744ac23f813bd992efb80ae2b61a1acefb5054c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The nvme_transport_ctrlr_scan() may return failure while there are
multiple controllers, so the probe context's init_ctrlrs list may
not null for this case, so when free the probe context, let's ensure
there is no controller in the init_ctrlrs list. Also added a UT to
cover this case.
Fix issue #1095.
Change-Id: I4d9a10ad73cf00bbe159edd1f5b919797333feb6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476969
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_qpair_get_state fits more closely with the semantics in other
modules.
Change-Id: I6ea8e02abe27253d9b4d779a43ac1963be56356a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The qpair state transport_qpair_is_failed is actually equivalent to
NVME_QPAIR_IS_CONNECTED in the qpair state machine.
There are a couple of places where we check against
transport_qp_is_failed and then immediately check to see if we are in
the connected state. If we are failed, or we are not in the connected
state we return the same value to the calling function.
Since the checks for transport_qpair_is_failed are not necessary, they
can be removed. As a result, there is no need to keep track of it and it
can be removed from the qpair structure.
Change-Id: I4aef5d20eb267bfd6118e5d1d088df05574d9ffd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now all registered producers should be stopped (unregistered) before
NVMe detach, otherwise NVMe controller cannot be safely detached.
This patch allows to stop all not unregistered io producers before
NVMe detach:
1. Callback to the "struct nvme_io_msg_producer" to stop producer
started on selected controller.
2. On nvme_io_msg_ctrlr_detach() if there's some unregistered producers,
stop all before freeing resources.
This approach also fixes issue with not to stop CUSE device when
NVMe controller is detached without unregistering producer (github
issue #1033).
Fixes#1033
Change-Id: Ia1ffef566bb745edb55c54d6786ea481a35bbefd
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch uses lowlevel fuse functions to process messages to
eliminate the need to use signals to interrupt blocking read
operation in fuse_session_loop().
Fixes#1032
Change-Id: Ie9c9ea76cc135c383f5757864aa2d84ac9eb3da3
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the initiator dies without a disconnecting a qpair, the target can
possibly retain the state of the connection. In this case, it will
inform us that the connection is stale, and we need to try again.
Change-Id: I4d349c634aee59ce9ea4af795b07dd8649db56b3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe hotplug must be monitored in the primary process -
DPDK doesn't support trying to handle it in the
secondary process.
This issue was somewhat masked previously in secondary
processes, since usually it would just probe(NULL) which
meant probe all attached NVMe controllers. So in the
secondary process, we would probe just once, and create
the hotplug fd - it would never actually try to monitor
it.
But when explicitly specifying multiple trids in a
secondary process, probe would get called multiple
times. First time would be fine since it only creates
the hotplug fd. But second time would segfault since
monitoring for hotplug requires checking the DPDK-allocated
context which doesn't exist in the secondary process.
Fixes issue #1063.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a9a91e222c206034293d90e30e3f598c8d7baa8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the first step in properly reconnecting after a hard power off
event.
Change-Id: I9739bffacd66ec6d9f8f1d376bf42291c84f90f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This step is going to become more involved, so it's best to keep it in a
separate function entirely.
Change-Id: Iefa9860420edf28e858c4ed8aa932985c686cfd9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473060
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should alert the upper layer when the qpair becomes unusable due to
qpair errors.
Change-Id: Icdee3b55a14441a60111f3bd7a44dceef93bbb09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474095
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To remove the duplicated code.
Change-Id: Iab9989f9928698967533e45e7cffad4f09bde16a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we have a mix of -1 and -EINVAL which
is confusing, especially since these types of failures
also result in the caller's callback routine getting
invoked.
While here, document this new -EFAULT return code for
all of the functions that could return it.
Fixes issue #797.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8dfbba0ec0b83db0f2ec055b15830981af1965df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473054
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is always the request pointer, so rename it for clarity.
Change-Id: Ifbda7db7787c65f0deb190a1e94f0676b2c0d99a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Users already have to poll the admin queue, so embed the io_msg
queue polling there to simplify the API.
Change-Id: I4d4d3be100be0798bee4096e0bbda96e20d2405e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472833
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Disconnecting qpairs from the admin thread during a reset led to an
inevitable race with the data thread. QP related memory is freed during
the disconnect and cannot be touched from the other threads.
The only way to fix this is to force the qpair disconnect onto the
data thread.
This requires a small change in the way that resets are handled for
pcie. Please see the code in reset.c for that change.
fixes: bb01a089
Change-Id: I8a39e444c7cbbe85fafca42ffd040e929721ce95
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472749
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we disconnect qpairs without taking the lock, we run the risk of
trying to double free qpair resources before they have been marked as
NULL.
For example, polling on one thread and calling
nvme_rdma_qpair_disconnect from one thread while doing an
nvme_ctrlr_reset on another thread. nvme_ctrlr_reset will call down to
nvme_rdma_qpair_disconnect on the same qpair and without any locking it
can result in trying to destroy the qpair resources multiple times.
Change-Id: I9eef6f2f92961ef8e3f8ece0e4a3d54f3434cff8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modifying the target_disconnect.sh test to include an example of
transport_id failover for an NVMe-oF controller.
Change-Id: I746ed737ab56c7dec6ee99e840c631ba46ee359e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added RPC commands to register/unregister CUSE devices
to NVMe controllers:
- bdev_nvme_cuse_register
- bdev_nvme_cuse_unregister
Additionally two RPC now return CUSE device names:
- bdev_get_bdevs for namespaces
- bdev_nvme_get_controllers for controllers
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I69c4bf41ec8f78a7522894268a67dd733881712f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
IO request handling implementation for CUSE namespaces:
- NVME_IOCTL_SUBMIT_IO,
a. SPDK_NVME_OPC_READ,
b. SPDK_NVME_OPC_WRITE,
Other ioctls related to the namespace:
- NVME_IOCTL_ID,
- BLKPBSZGET,
- BLKGETSIZE,
- BLKGETSIZE64,
Additionally NVME_IOCTL_ADMIN_CMD has been implemented
for namespace to send admin cmd to its controller.
Change-Id: Iaa2a5ee409b35c682ae8b2bd2309e8b67eb51981
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469691
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe character device implementation. This patch adds implementation
of IO producer using CUSE library. It allows to create nvme device
nodes in linux kernel for controller as well as for namespace and
process ioctl requests as usual from linux environment.
Both devices (controller and namespaces) are exposed as character
devices.
To compile NVMe CUSE module use "./configure --with-nvme-cuse".
Names for created CUSE devices can be retrieved using
spdk_nvme_cuse_get_ctrlr_name() and spdk_nvme_cuse_get_ns_name().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0fc9a9a1ef3c9c2b3112d07c2b4b1f8d49665ee1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch allows to send IO requests from external module to the nvme
device.
External module should call nvme_io_msg_ctrlr_start() to start IO message
producer on the controller and enable sending messages.
nvme_io_msg_send() is used to send IO to NVMe driver thread context,
where passed function will be called. Allowing the external module to
issue IO as needed.
NVMe driver users should poll spdk_nvme_io_msg_process() to move forward,
sending IO from external module and process their completions.
Change-Id: Ie59abac69870c4e4daa50120c747f3b620395921
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471386
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can be useful when trying to perform multipath failover at the
application level. However, the controller must be in the failed state
before calling this function.
Change-Id: I5403c0036fed5dd3600ee20592925297494ba8aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470699
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These will be useful helper functions for the trid modification code
that gets introduced later.
Change-Id: Ief73e3045710bf35c511794c19b4dfefb93018f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While it is unlikely that a single qpair will be failed, it is important
to make it possible to reconnect a single qpair.
This function is also handy at the application layer when going through
a reconnect workflow. If we get -ENXIO from a qpair when we poll, we
will turn around and call this function. If we get -ENXIO from this
function, then we know the whole controller is failed and we need to do
a reset.
Change-Id: I6a8ea0ce27fce2f5fc0a5b3db05834acd68e6a39
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471417
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, get locking range info will allocate
memory everytime. Thus calling this function multiple
times will cause memory leak.
Now, we allocate only if it is NULL. If it is not,
then we just memset to zero.
Change-Id: If048416a2056176f86206a33e2b5db210288fe4f
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some nvme drives might take 6-7mins for
this operation. Thus, introduce async function
to avoid waiting.
Change-Id: Id48478aec653d3fb75a3c5ce75d4997284ed016c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be the canonical way of informing the user that we have lost
the qpair connection somehow.
Also update all of the functions that will return -ENXIO to the user.
Change-Id: Ic6c7c2d0e07e9d3e857a3476bb6b91fb4b6454fa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
