Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This patch adds support for live migration for vhost-scsi and vhost-blk
backends.
Change-Id: Ibfc8a713dbba14ba8cb38377a71e28fd340b1487
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/394203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vhost I/O only need to be split on 2MB boundaries if
there is a break in the VM's memtable at that 2MB
boundary.
This should drastically reduce (if not eliminate)
the intermittent test pool failures seen recently.
virtio limits number of segments to 128, but this
2MB splitting could introduce additional segment
breaks which we do not allocate IOVs for. In almost
all cases, there are no memtable breaks except at
low 2MB, so most of the extra segment breaks we are
adding are unnecessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12d85c289ad80c7bb65e3d2030a2405092b19deb
Reviewed-on: https://review.gerrithub.io/396058
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Adopt two improvements for iSCSI by Ziye to VHOST.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I8f067093d593c8d483c52587669f8b0b706f497f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The latest patch for the iSCSI connection is applied to the vhost
too.
RTE_MAX_LCORE in the for loop is removed and the for loop is
replaced by SPDK_ENV_FOREACH_CORE().
When the cpumask is unexpectedly 0, not 0 but the first core is
returned.
Change-Id: I39cfc2219a3532eccc8c0ce59712102b947a76d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The latest change for the portal group is applied to the vhost.
The following comment is quoted from it.
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: Idcd72a12ef52e4ccec8476e7d54fab82867cf936
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392587
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Virtio spec say that any IRQ requests are only hints. So try to limit
number of interrupts generated by vhost by defining minimum interval
between sending IRQ. Coalescing is disabled by default. Can be enabled
using RPC command 'set_vhost_controller_coalescing'.
Change-Id: I9b96014d004ea0ea022b4498c6b47d30d867091a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/378130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes the async event body non-blocking
and also fixes potential deadlock scenario:
* call_external_event() enqueues vhost_event
* destroy_device() locks g_spdk_vhost_mutex
* destroy_device() enqueues it's vhost_event
* reactor dequeues events
* cb from call_external_event is dequeued first
* g_spdk_vhost_mutex is locked (deadlock)
* destroy_device() times out, abort()
Change-Id: If8f51ada3ee5c47ba126f74187a40a285c001c77
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the IOMMU is enabled, automatically register memory
added by the user through spdk_mem_register().
Change-Id: Ie02c7bf445314da23e2efee9de9c187ed0773a9f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A single warning message is printed instead.
This is required for VMs which have memory mapped virtual devices. (e.g
NVDIMM in Clear Containers). This memory won't ever be used by guest
kernel for IO processing.
Change-Id: Ie24501acbdb3ba0d67bd29b146a09b222451427d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
According to the env.mk, DPDK include file can be
passed by user, so we need to use DPDK_INC to
avoid the compilation issue.
Change-Id: I24f6ca496eefe16c18bba7278cc6d00120da79e1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/373235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A virtio descriptor may specify a buffer that spans
a huge page boundary or even a vhost memory region.
So modify spdk_vhost_vring_desc_to_iov() to take this
into account.
While here, also change spdk_vhost_vring_desc_to_iov
to return int instead of bool. int return with -1 is
most standard to indicate failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71faefce0367dc9e44d70ea4429a28dd64f04c10
Reviewed-on: https://review.gerrithub.io/371756
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
While here, add a new DEFINE_STUB_V for void stubs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b0b27616ddc2525cdd425f65edf8a0bd89ba564
Reviewed-on: https://review.gerrithub.io/371735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
