Replace old '/home/sys_sgsw' location by new created
'/home/sys_sgci/spdk_dependencies'
Also update readme with current user name.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ifcea15f704183c7ae0044ee02bd28b6bd891b262
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Also, create a common dir which will hold symlinks to all existing
plugins used in the tests. Location of the actual lib is not changed
so the relation to the given test suite is clearly preserved.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icb70bbc61fbfa3325a357d5dd93f554ff132a3b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows to pass to rpc_cmd() sets of commands via stdin. E.g.:
rpc_cmd <<-CMDS
bdev_malloc_create -b Malloc0 32 512
bdev_malloc_create -b Malloc1 32 512
bdev_malloc_create -b Malloc2 32 512
CMDS
Since rpc.py is already running in a server mode, this is slightly
faster than grouping commands and running scripts/rpc.py directly.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I29fbcf3f2751400980d35b4de2cce2da1cd2bf2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unittest job is now split into three smaller jobs, each of them
requires unit tests to be built.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ibc0dfbf6f7395a9dfe23242b532fb5cb1f8dd8f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This also introduces scheduler tests in the autotest pool.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I892a2374e21dab0e349c655dcafaa4cc2e45fdc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5741
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 20.11 moved the kernel modules to separate
dpdk-kmod repository. It has to be built separate
from DPDK.
If needed for testing vm_setup.sh script now contains option
to build this driver.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98a5eb956eb0cc60ec402d88fcdbd66d4854f19a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6033
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to recent change to vm_setup.sh we now expect
this module to be already provision in system and
available under /lib/modules.
Change-Id: Ica40e7ad95710f44bf538919e7a65878f416b7e4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to track core dumps in a more efficient
manner. Till now, some cores could be missed if the binary was
executed outside of the cwd of the autotest (i.e. outside of
the spdk repo) but which was part of the critical path of the
actual test (e.g. fio in vhost-initiator tests). Also, since
core_pattern was set to plain "core", impact on the underlying
storage wasn't controlled either - if core was 20G in size,
this is what we would get. This could easly exhaust storage in
case error-prone patchsets were submitted on the CI side.
The collector will try to mitigate all the above by doing the
following:
- collecting all the cores, regardless of their cwd
- limiting size of the core to 2G
- compressing the cores (lz4)
Also, limit of 2 collectors executing at once is set - if more
processes crashes at approx. the same time, they will be logged
in the kernel log instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5956a9030c463ae85a21bfe95f28af5568c5c285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I5226c58f9993e0d1d8665ac75930ea952e474f05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Although '|| true' has been added in rpc.py bdev_nvme_opal_revert -b nvme0 -p test || true,
Backtrace also appears while running autotest.sh on none-opal nvme server.
Now using unique name for the controller in opal_revert_cleanup() can fix the issue.
Change-Id: Id65739f9d4c37e33817406a074350345a767e99c
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <qun.wan@intel.com>
This is done to avoid conflicting parameters being passed to
./configure via get_config_params(). Originally, if all previous
conditions were met, get_config_params() would return "--with-reduce"
in the string. ./configure would lookup the NASM version on its own
and disable the --with-reduce and --with-isal parameters. However,
--with-reduce would be set again by ./configure while looking up
the cmdline. This would end up with --with-reduce and --without-isal
being set together, failing the configuration.
Change-Id: I81fa1dfd4bc5b41b82525e911b1c75fc7e15fd14
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5003
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.
Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Using another flag for the conditional will let us
run release build test in selected job configurations
for per-patch testing on CI side, not just for nightly
tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib9de1c98bf6d7380670f22321f2df7784f2517de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is mainly needed by the vg jobs which use distros with broken
uio driver. Currently, this is not the case, however, there is a
plan to add centos8 to the CI pool which suffers from this very
issue.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I17724cf9c14809c3dca5a0817433f1fe27449117
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This was previously done in a Jenkins script. Move it
to autobuild.sh inside the repo where we can all see it.
Use new meson/ninja build system while at it.
To test, use autorun.sh with the following cfg options:
SPDK_RUN_EXTERNAL_DPDK=/tmp/spdk/dpdk/build
SPDK_TEST_NATIVE_DPDK=1
SPDK_RUN_EXTERNAL_DPDK can point to a different path,
but needs to have correct access permissions for current
user,
I had to reorder some code in autobuild.sh. Since
SPDK_RUN_EXTERNAL_DPDK needs to specified the ./configure
script can't be run without existing dpdk directory,
so the dpdk build needs to happen before the initial
./configure as well as the ocf pre-build.
Change-Id: Ibc57094806b361dc3c6acf55942f04a938e5194f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes all the sleeps called after setup.sh reset. These
sleeps were meant to wait for devices given tests depend on.
Change-Id: Ibb86c9f6f8d5f1b05d165e84d9019530af84f9ea
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure that setup.sh waits for block devices during the tests.
This is to make sure that the underlying controllers are ready to
be talked to and minimize the amount of their flakiness.
Change-Id: Id09445de7ac7ccf4c9f679ee2b6c4bdd14c89733
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
find's -name doesn't work with regexes hence the applied pattern
didn't match on plain "core" name (as the expression would suggest to
match on). Replace it with additional shell patterns to include some
additional common core_patterns - this is relevant for the tests which
may be run indepdendently from autotest.sh and still use core_pattern
with its default setting.
Change-Id: I5ba1bc44b156a68779d09688718b7c634b6d8cba
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The main use case is to make sure that files, which are normally
purged upon exiting from the tests (regardless if the test finished
successfully or not) are also printed out to stdout - this is done
for the sake of debugging any potential failures that might have
been hidden out in said tmp files which we don't want to keep
around.
Change-Id: I294c3bdc8f45be49e414bf45f80848be89355360
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3916
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This may be useful in debugging and pinpointing devices which may
take longer time to initialize during the tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5abad17e1a2690a063b6152462dcf49d22c70d0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most common scenario is to run SPDK tests using "autorun.sh",
which calls autotest.sh with "sudo" and permissions are not
an issue then.
However we have a number of tests which are run independently
(e.g. test/fuzz/autofuzz.sh) and try to remove old temp files
before sudo is used to elevate privileges. This causes tests
to fail early.
Using "sudo" explicitly in autotest_common.sh to remove old
files will fix the problem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I84f75c189bb04d0e3208dfc4f221d07d17db5ee5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3819
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
This is to avoid including non-matching pattern as an actual item.
Change-Id: Ie4fbb27e66efa1f56618959bb7db6f0fccfc2847
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get rid of WITH_DPDK_DIR and SPDK_RUN_INSTALLED_DPDK,
introduce SPDK_RUN_EXTERNAL_DPDK which can point to
a DPDK dir. It's an empty string by default.
Change-Id: Iff2b3773a4614db07f4196165087a79472e02b9a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/867
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If $output_dir is not set, cwd is used as a designated output dir
throughout the runtime of the script that sourced autotest_common.sh.
This, however, may fail in some particular cases, e.g. when calling
autobuild.sh directly from within the spdk repo. As a result some
*.txt files that are created by scanbuild_make() will end up in the
root of the repo. This causes porcelain_check() to fail as it does
pick these files up after the test is done.
To avoid similar scenarios, simply make sure the desired output dir
is always created and that it resides outside of the repo.
Change-Id: I5b2e142ce9c2a0b8d24d5331f2b52110c9634c67
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
lsblk used in waitforblk() works on blk device names
withouth full path (e.g. "nvme0n1"). This results in
a timeout because we pass "/dev/X" as an argument.
waitforfile() is the way to go in this case.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I47a2b76bce6f15e0ffa2070e581bbf16f9647bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3694
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This setting may be crucial on some systems in keeping core dump files
in order, that's why we should always make sure it's main value is
restored upon exiting from autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0c81a8c96c2d8f061e95c2614d9c30f4e3cdd5a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3605
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NOT() function is meant to report a success when given test
fails. This negative testing is meant for specific cases, however,
there may be some circumstances where application failed, but not
for the reasons the tests was aiming for, e.g. upon receiving
signals from the kernel, like SIGILL, SIGSEGV, etc.
To make sure the test is aborted in such a scenario, check exit
status of the execution more carefully. If it matches any of the
defined signals make sure to fail the test. By default, all signals
which generate cores are looked up and SIGKILL which may be sent
out by the kernel as well (in case of the oom-killer).
Also, $EXIT_STATUS var is provided to specifically declare which
exit status NOT() should be looking for if process terminates with
a failure (i.e., for any other reason then receiving a signal).
Change-Id: I67b42ef038ef4553aceaf96d4da139858d819f22
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk/nvmecli git index happens to be corrupted and
results in a lot of unrelated failures in the CI.
This patch attempts only to mitigate the issue of
unwanted failures by restoring nvmecli repository
to clean state.
Fixes#1496
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic17bffb0bc5bd3222c9f395fb217d2ffae99ceb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using hardcoded path of /tmp/spdk was a bit problematic due to the
way how CI mixes root permissions with non-root's during test
execution. As an example, see:
https://review.spdk.io/gerrit/c/spdk/spdk/+/2560
Instead of using /tmp/spdk as a fallback, always try to create tmp
directory by generating its path via mktemp(). This way, as with
"autobuild: Use mktemp() for spdk workspace (ae730042)", different
permissions shouldn't be an issue anymore.
Lingering tmp directories will be purge at each set_test_storage()
run.
Change-Id: I93bc60c97b68e66606e98fc83463074fc020e372
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3238
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Usual way to call get_nvme_bdfs() is to iterate over resulting bdfs.
When no bdfs are returned, most of the scripts do no not execute tests
at all and assume success.
Instead of adding error checking for each and every script for no bdfs,
this patch makes get_nvme_bdfs() exit with test failure.
This assumes that there will never be a test that expects no devices
to be present.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e41a885c76ce6cc248fb076bc4f4efd4695ff3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Only spdk/nvme-cli fork with spdk-1.6 branch is supported.
Even then this will be deprecated at some point in the future,
in favor of nvme-cuse.
This came up when fixing the tests to actually run.
If unsupported nvme-cli is used, compilation succeeds and tests
fail at the functional test part with non-obvious message :
# ./nvme id-ctrl 0000:84:00.0
0000:84:00.0: No such file or directory
Some of the CI machines need to be updated, but this
check will make it easier to gauge what went wrong.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia19121a6c49b9618b8fea9e13304e27089f13dcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
NVMe tests compiled the nvme-cli, but turns out that
NVMe-oF did not. This patch moves compilation to
common script. Meanwhile next one will use it in other tests.
Additionally return to the original directories with
pushd & popd.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica60775a9b8e4347bed28d4c9dfae1acab2cae9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tests should always have a reference to $rootdir absolute path.
Before this change, result of this function depended on current
working directory.
Test like test/nvme/spdk_nvme_cli.sh where directory was changed,
would fail.
With this change the path to get_nvme.sh script should always be
correct.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id555188f032e179eedd406463446a85e13234b6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2936
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If for any reason the cuse tests do not revert state
of NVMe namespaces to the original state, the test
machines would be stuck in until manual intervention.
Assumed default state is single namespace,
encompassing available space formatted as 4k block size.
This patch adds nvme_namespace_revert(), which
searches for NVMe devices that support Namespace Managment
and have some space unallocated.
When such device is found, all existing namespaces are removed
and single one created.
Fix#1435
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc3b04b3f166bf450b884674fa6a482e2fbc4c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2829
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If there are two or more Nvme SSDs in system, $bdf includes many bdfs.
Function get_first_nvme_bdf() have no effect on local phy servers.
nvme_rpc.sh will report error as below.
09:16:06 # /home//spdk/scripts/rpc.py bdev_nvme_attach_controller -b Nvme0 -t PCIe -a 0000:03:00.0 0000:04:00.0
usage: rpc.py [options]
rpc.py: error: unrecognized arguments: 0000:04:00.0
Change-Id: I91be02b874fcc4ee4626c082b16d06e722797744
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
