When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is recommended to read CSTS when there is a timeout.
If CSTS.CFS (Controller Fatal Status) is set, we should
reset the controller.
But if an admin command on a fabrics controller times
out, reading CSTS submits another fabrics command that
could also timeout. Even worse, we are recursively
polling the admin queue for completions in this case.
Fixes issue #1716.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d31f6302375c52eba6f4370748d622fbd25ca7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was missed when this option was added recently in
46a348597 (rpc: add keep alive parameter in bdev nvme).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38fa2d4fc7c995bb0cea89b7b8cb51b2ce72aaa0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5512
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add keep alive timetout parameter in bdev_nvme_set_options.
NVMe bdev can set this value especially when we test with
bdevperf.
Fix github issue: #1690
Change-Id: I255c935671b74cdb615a8d393e7d7e84524f3c23
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5306
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In other places, nvme_ns->populated has been used to check an namespace
is active for an existing nvme_bdev_ctrlr. We do not need to call
spdk_nvme_ctrlr_is_active_ns() again. Follow it in this patch.
Besides, factor out the namespace comparison into a small helper
function bdev_nvme_compare_ns(). It will be used to check if two
controllers have the common namespace for ANA multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8aad2f58aae1fd45ca0dd981dded1c406f215ac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5359
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously, we separated two cases, creating an new nvme_bdev_ctrlr
and adding an new path to an existing nvme_bdev_ctrlr as early as
possible.
However, we can merge creating an new connection between these two
cases. In this patch, connect_attach_cb() calls bdev_nvme_add_trid()
and then calls spdk_nvme_detach() if the nvme_bdev_ctrlr whose name is
ctx->base_name already exists.
This will simplify ANA multipath feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2eec92dbf96e979690a1087c5c4fc306a29f15de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5329
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move bdev_nvme_add_trid() up in a file to locate it before
connect_attach_cb(). The next patch will change bdev_nvme_add_trid()
to be called by connect_attach_cb() to merge the connect operation
for failover case.
bdev_nvme_add_trid() will be associated more closely with
connect_attach_cb() and bdev_nvme_create(). To make it clear,
move bdev_nvme_remove_trid() down before bdev_nvme_delete() too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5eb491baea57d715aadc07f206b94884334efaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5328
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if we use TAILQ_FOREACH_SAFE(), it is not safe to lock and unlock
while linked list is parsed.
To fix such erroneous implementation, use SPDK message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79a126560ccd847149d4d06bb3d2111e43060ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5321
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Factor out the common operation to destruct nvme_bdev_ctrlr further
into an new helper function _nvme_bdev_ctrlr_destruct() from
remove_cb(), bdev_nvme_delete(), and bdev_nvme_library_fini().
The next patch will use SPDK message to fix the race condition
by locking/unlocking during linked list parse.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5392bebcf830fac6165aa424b06aec0c9274dc8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5320
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the end of the series to make the code of ocssd_bdev more
similar with nvme_bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9dfc2634292ec581d6787500e46e74ad3b95aa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5251
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Extract and pass contents of spdk_bdev_io to I/O submit functions.
Besides, adjust the coding style for I/O submit function calls
with nvme_bdev.
The next patch will replace spdk_bdev_io parameter by bdev_ocssd_io
parameter for I/O submit functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2556d4a3c092d4ffacd47bbfc95db060da477bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5250
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev passes not spdk_bdev_io but nvme_bdev_io pointer to I/O
submit functions, and gets spdk_bdev_io pointer from nvme_bdev_io
pointer in its completion callback functions.
This is very clean because spdk_bdev_io is processed by the generic bdev
layer and nvme_bdev_io is processed by the NVMe bdev module.
The patch series changes ocssd_bdev to pass not spdk_bdev_io but
bdev_ocssd_io pointer to its I/O submit functions.
This patch is the first of the series and add ocssd_bdev parameter
to I/O submit functions. ocssd_bdev pointer is got from
bdev_io->bdev->ctxt. Hence this patch removes one dependency on
spdk_bdev_io.
One noticeable small change is that get_zone_info() gets zone_info
from not bdev_io->bdev but nvme_bdev->disk to advance removing
the dependency on spdk_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3127ceb1fc8923e321a1404edbb19b63f5fde5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5248
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we support ANA multipath, I/O path will get nvme_bdev_ns from
nvme_bdev_ctrlr->namespaces, and nvme_bdev_ctrlr will be got from
nvme_io_channel.
Hence this patch adds a pointer to nvme_bdev_ctrlr to struct
nvme_io_channel.
As a side effect, nvme_io_channel->ctrlr is helpful to simplify
admin command submit functions, and do it in this patch.
For ocssd_bdev, we will do the similar change later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6976d1543ccda37dde4b81b2124d88f0d05ed7eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5055
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we support ANA multipath, we will use spdk_nvme_ns and
spdk_nvme_qpair pointers for I/O submit functions after checking
ANA state of spdk_nvme_ns.
It will be efficient and easy to understand if we unify such check.
The next patch will provide a helper function to do such check.
This patch changes the parameters of I/O submit functions as a
preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic741caa1d7e6df844b875beea776e79d4eb8d6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5204
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_flush() just completes with success now and uses only
bio parameter now, but matching parameters with other similar I/O
APIs will be good for future enhancement and following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I64be668fa781396ef68b6b506b22cb153d7b6850
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5203
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using bdev_io->bdev will be more straightforward than using
bdev_io->bdev->ctxt and &nbdev->disk.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5854ab063b7b21710e9f899dd93340624a8cb49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5202
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This and the next change will enable us to pass spdk_nvme_ns and
spdk_nvme_qpair as parameters to I/O passthrough APIs. When we support
ANA multipath, ANA state of spdk_nvme_ns will be checked. These changes
follow that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id38a0e14501ff6402f9b151eaf9e44864079412b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5200
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I0ec4c0cb5e7a8f4b94a1ee6272c8df9ee7f06aa6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Using ocdev_io->io.zone to update zone is a little confusing,
and so cache zone pointer from ocdev_io->io.zone and use it for
clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaee9b1fa8a86240022ddf5038a8c86b48476ba78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5148
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This refactoring increases the code size slightly but improves
readability, and will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I704eca60fe98e4622e0d39d2e54ead63844156f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5147
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to improve readability even if the factored functions are
used only in a single place.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6c7ba4380124a957e66e31123e3743d83e7615
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5146
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Factor out getting chunk info. offset into a helper function
bdev_ocssd_to_chunk_info_offset() and locate it next to
bdev_ocssd_to_disk_lba(). This will improve readability a little.
Besides, cache addr_shift first in bdev_ocssd_translate_lba() for
clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4c078e2002638d90b000b97f9f7cda90938d02ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5132
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the internal of bdev_ocssd_num_parallel_units() into an
new inline helper function ocssd_range_num_parallel_units(), and
apply the latter into a few functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16550046ed2d6f543f66711810b30bd45f21c970
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5130
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Clean-up bdev_ocssd_num_zones(), bdev_ocssd_get_zone_by_lba(),
and bdev_ocssd_get_zone_by_slba() to make a little easier to read
and understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I13c92dc86dc3855f1ec9ab5ae9d7097607f20512
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5129
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Cache the return value of bdev_ocssd_num_zones() in bdev_ocssd_init_zones()
to improve readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If71b40221694e512617389da03720211744f3b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Locating bdev_ocssd_num_parallel_units() and bdev_ocssd_num_zones()
closer to the related helper functions makes us a little easier to
understand the code.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d96034bf26b2b1a39d879654ca2b30289349e4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5127
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following a previous patch, cache pointers to spdk_nvme_ctrlr and
spdk_nvme_ns in bdev_nvme_dump_info_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I769d112f815e29262d52faee5ec17ccb914a7154
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5104
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bdev_nvme_failover() updates trid of spdk_nvme_ctrlr using
spdk_nvme_ctrlr_set_trid(). Hence trid of spdk_nvme_ctrlr is always
up-to-date.
Hence bdev_nvme_dump_info_json() can query trid simply by calling
spdk_nvme_ctrlr_get_transport_id(). The queried trid is a const
parameter. Hence add const to nvme_bdev_dump_trid_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id04881f9e7596b910bdf26c4f14f1ebcb3cdbbee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bdev_nvme_io_type_supported() queries NVMe driver to return if the
specified IO type is supported. To clarify it, cache pointers to
struct spdk_nvme_ctrlr and spdk_nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0956506e720722216e03cb808f61737ada617329
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the following patches, nvme_bdev_subsystem will be added and nvme_bdev_ns
will be added to not nvme_bdev but nvme_bdev_subsystem.
To do it easier, factor out creating an NVMe bdev into an new helper
function nvme_bdev_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa902912ba1ea979153b04ef4ac9fae10c09b7e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5018
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_reset() has been called only by a single caller now.
Hence pass nvme_ch to bdev_nvme_reset() to queue I/O easily.
This will improve readability and clarify the logic.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc22cb499fcf8455a2b04d44688f999344abc352
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4992
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out the common operation between internal calls and bdev I/O
calls of bdev_nvme_reset() into an new helper function
_bdev_nvme_reset().
This is to improve readability and to clean-up the operation only
for bdev I/O calls in the next patch.
Replace bdev_nvme_reset() by _bdev_nvme_reset() for internal calls.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7580a8fb40d5a1d694d5f913cde770ca95a0b0c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_bdev_nvme_reset_ctrlr will figure out what it really does.
_bdev_nvme_reset will be used by an new helper function in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I890f962529a663ea412bcd416ef9ba31fadfbf61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4990
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_delete() had called nvme_bdev_ctrlr_get_by_name() and
then called remove_cb(). But nvme_bdev_ctrlr_get_by_name() had not
been guarded by lock and remove_cb() parsed the list again by using
spdk_nvme_ctrlr as a key.
These were not safe and efficient.
This patch refines bdev_nvme_delete() to inline remove_cb() into
it and acquire mutex before calling nvme_bdev_ctrlr_get_by_name().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf39859809efa6f22899353c53b7b1eef58aa470
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4842
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the second parameter remove and include path removal into
bdev_nvme_failover(). Additionally, bdev_nvme_failover() returns
only two return values, 0 or -EAGAIN, and hence change
bdev_nvme_remove_trid() to return the return value of
bdev_nvme_failover() directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ife560f886e32ecec23691e01e87069502e27cc0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4867
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_bdev_ctrlr_destruct() had checked first if poller is already
registered. On the other hand, nvme_bdev_ctrlr_destruct() had been
used as a poller function.
Hence nvme_bdev_ctrlr_destruct() had no way to unregister poller
if destruct and reset controller were raced.
This patch fixes the issue. The previous patch ensures nvme_bdev_ctrlr_destruct()
is called only once.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iba5424c42a4a3e5f03575df2616ec2a817e38f51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Checking if destruct is false and setting destruct to true are
separated by mutex in remove_cb() and bdev_nvme_library_fini().
It was possible that multiple threads called nvme_bdev_ctrlr_destruct()
because the caller could call nvme_bdev_ctrlr_destruct() before
setting destruct to true after knowing it was false.
This patch ensures that nvme_bdev_ctrlr_destruct() is called only once.
Set ctrlr->destruct to true without releasing mutex after checking
if ctrlr->destruct is false.
If destruct is set to true before calling nvme_ctrlr_depopulate_namespaces(),
nvme_ctrlr_depopulate_namespace_done() may call nvme_bdev_ctrlr_destruct()
because it is likely that reference count is zero and destruct is true.
In this case, remove_cb() or bdev_nvme_library_fini() cannot call
nvme_bdev_destruct() after returning from nvme_ctrlr_depopulate_namespaces().
On the other hand, if a controller has no namespace,
nvme_ctrlr_depopulate_namespaces() does nothing and
nvme_ctrlr_depopulate_namespace_done() is not called. Hence
remove_cb() or bdev_nvme_library_fini() has to call nvme_bdev_destruct()
after returning nvme_ctrlr_depopulate_namespaces().
To unify both cases, initialize reference count to one as a sentinel value
and remove_cb() and bdev_nvme_library_fini() decrement reference count
and then calls nvme_bdev_ctrlr_destruct() if reference count is zero
after returning from nvme_ctrlr_depopulate_namespaces().
Additionally, add assert to check if reference count is not negative
to find bug in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a617b5aa4d0a9faff832e63c2ed4b353341dd6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4817
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
subnqn will be used to manage subsystem, and so add it to the output
of bdev_nvme_dump_info_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28023754fa19d14aa9297f4e6676d235f024e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4974
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To improve readability and make the following patches easier,
factor out the common operation of bdev_nvme_create_cb() and
_bdev_nvme_reset_create_qpair() into bdev_nvme_create_qpair(),
and factor out the main operation of bdev_nvme_destroy_cb()
into bdev_nvme_destroy_qpair(). bdev_nvme_destroy_qpair() is used
in the error path of bdev_nvme_create_qpair().
Updating g_opts.io_queue_requests again is no harm and so is done
in bdev_nvme_create_qpair().
Use the term nvme_ch in bdev_nvme_create_cb() and bdev_nvme_destroy_cb()
for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie0a4251023037958d122fbb5d7ee72d42238b3ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4981
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change will make the next patch smaller and its review easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2784fa74dce98676958180bbf80a9a4f938454db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5101
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change removes the necessity to get nvme_bdev_ctrlr by calling
nvme_bdev_ctrlr_get_by_name() and simplifies the code.
bdev_nvme_reset() checks if nvme_bdev_ctrlr->destruct is false first.
Hence we will not degrade stability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7a3baab666644c3063af404905284c3e16bc62ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Calling spdk_nvme_ns_get_data(ns) on an inactive namespace will crash.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib8cfa84e785a4a04dc3b1826c700a22eeec51e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Analyzer treats these as warning, they are unused.
Issue:
bdev_nvme_rpc.c:706:7: warning: Although the value
stored to 'rc' is used in the enclosing expression,
the value is never actually read from 'rc'
if ((rc = spdk_nvme_ctrlr_reset(firm_ctx->ctrlr)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bdev_nvme_rpc.c:851:8: warning: Although the value
stored to 'rc' is used in the enclosing expression,
the value is never actually read from 'rc'
if ((rc = spdk_bdev_open(bdev2, true, NULL, NULL, &desc)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
nvme_rpc.c:375:10: warning: Although the value stored
to 'rc' is used in the enclosing expression, the value is
never actually read from 'rc'
return rc = val->type == SPDK_JSON_VAL_STRING ? -ENOMEM : -EINVAL;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1d58db97b00ac2d102c1a46d7852c2ce3f559fda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Except for bdev_ocssd_submit_request(), we can pass nvme_ch instead
of ch to I/O functions, and do the change in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia9e09300d053fa80ada8286c8df7ec689bdb9aaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4527
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change follows the standard nvme bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I83486712d23668e2688e0f1353519cea6dd6fef7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4689
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This changes follows the standard nvme bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8306fef00489b36b57065bde78ccf9d852b5cba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4688
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change follows the standard nvme bdev.
Two local variables used ioch for nvme_io_channel and they were
confusing. Rename them by nvme_ch too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iad42d28e698c3cacc3ebc9df379fc7551bebcb55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4687
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As same as the last patch, follow the pattern used by standard nvme
bdev about bdev_ocssd_submit_request().
Extract main operations from bdev_ocssd_submit_request() into
_bdev_ocssd_submit_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b4d82a356a3f1fac9c052397714cd7ee8497d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4525
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It looks that we do not have any special reason not to follow
standard nvme bdev about bdev_ocssd_reset_sgl() and bdev_ocssd_next_sge(),
and it will be good for ocssd bdev to follow standard nvme bdev.
Add iovs and iovcnt to struct bdev_ocssd_io and rename iov_pos by
iovpos and iov_off by iov_offset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied864dc9505b3f1c0a19a8a36031dda9e32eb4d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4524
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have two functions, remove_cb() and bdev_nvme_library_fini() to
depopulate all existing namespaces.
Factoring out the operation into a helper function
nvme_ctrlr_depopulate_namespaces() will improve the readability.
Besides, change the line after return value for two functions to
adjust format.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibda921bdc94a50c14cca0ece462f76197efc5ccb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4642
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Swap the resetting case and the non-resetting case. Unlock mutex
before calling spdk_bdev_io_complete(). Use curr_trid instead of
tmp_trid to clarify the meaning of the stored value.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If3b520a16459aba498ac80ed887b9223ac5ca3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4523
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Consolidating error paths will be helpful to create and associate
with the creating controller. Fix a couple of memory leaks in error
paths together.
Then rename create_ctrlr() by nvme_bdev_ctrlr_create() to follow
naming conventions and clarify what type of controller is created.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3f9073756198c0b0bc65b67ce84a41233297eac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4509
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a drop-in replacement of spdk_bdev_part_base_construct() by
spdk_bdev_part_base_construct_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0c719683b5a9cd6dffce057552982d8e44871ab1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
This clean up the code a little more. Use the term failover instead
of multipath in the error message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b7fb8fe50b19b5639169c03f5242b9d6f14128b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_add_trid() is used once in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I738b7e959d13d419e090a019da6e7f1f09aa7109
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCIe failover is not supported yet and it is not possible that the
controller is included in g_skipped_nvme_ctrlrs for failover cases.
We can consolidate the code to create failover path in bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide456707a0b66a4b26eaf66392b9b53c3e659d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This simpifies the code a little without any degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6006266e250f2d083aa12424809d04fac6a9f8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_bdev_nvme_submit_request() already has a pointer to nvme_io_channel.
Passing nvme_io_channel simply to I/O APIs will be reasonable
simplification.
Two admin APIs, bdev_nvme_abort() and bdev_nvme_admin_passthru()
get the associated thread to the spdk_io_channel and set it to
nvme_bdev_io. These APIs get spdk_io_channal from nvme_io_channel using
the container_of macro. These APIs are not performance sensitive.
Using the contaier_of macro will be better than extracting the operation
from these APIs because we can keep the changes local to these APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I67985075d70551e4fe3bb84dfee15f1e4e882451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4384
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When NVMe bdev module supports multipath, nvme_bdev will have multiple
nvme_bdev_ns, and I/O APIs need only nvme_bdev_ns. So change the parameter
from nvme_bdev to nvme_bdev_ns for I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1e71abbab856112fdd6a333a89ba5f02f4e63ccd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to pass nvme_bdev_ns instead of nvme_bdev
to I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095478bc3ad305ba940fca101b74e74c7e8e74ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Struct nvme_bdev has a pointer to nvme_bdev_ctrlr and a pointer to
nvme_bdev_ns now, but nvme_bdev_ctrlr can be accessed via
nvme_bdev->nvme_ns->ctrlr, and so nvme_bdev->nvme_bdev_ctrlr is
duplicated.
The upcoming multipath feature will need struct nvme_bdev to have
multiple nvme_bdev_ns pointers.
Hence remove nvme_bdev_ctrlr from struct nvme_bdev and get a pointer
to nvme_bdev_ctrlr from nvme_bdev->nvme_ns->ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5b785cb26e535c7186fe630c1f8b7d598b0ba46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev layer nicely handles the case where we call this
function with the buffers already present - it just
immediately calls the get_buf_cb. But this adds extra
overhead in the case where the buffer is already present.
Since nvme has no alignment restrictions, we can just
check the iovs directly and avoid the extra call to
spdk_bdev_io_get_buf when possible.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66df0fde574a35e995a3432999d75bdbf9b27212
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4317
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
write instead of writev
Call spdk_nvme_ns_cmd_write_with_md if there is only one iov element.
Use spdk_nvme_ns_cmd_writev_with_md only if there is more than one.
This is about a 15% improvement in I/Ops.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a99b5507d37cde04e81feada65b14554ad01a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
readv API
It's cheaper to call spdk_nvme_ns_cmd_read_with_md than it is to call
spdk_nvme_ns_cmd_readv_with_md, so do a quick check of the iovcnt and
use the best one for the job.
This is about a 15% improvement in I/Ops.
Change-Id: I82e6677d1ac47abf9919f95e651e7a7595c5e9a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This RPC was using snprintf which could potentially
truncate a bad argument silently without alerting the
caller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1795b2e4086cbaa45390bd11b189755818b5c9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3613
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to further develop the ecosystem for multipath
failover support.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24a8cf13e60e6cc0d5b6374da33c8a4e5b6c499a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3069
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I547bd010f4b339b2af7f2b33027cddad4b4926bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3045
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are about to instrument some checks in this function
that will access the nvme_bdev_ctrlr struct directly so
pass that directly since the ctrlr is still accessible from
the nvme_bdev_ctrlr struct.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e0d0d6c433149368e84275426362f8283903027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic5c128244699c1a47275145ca7e41aa5f1366259
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch paves the way for introducing a tailq containing
multiple alternative paths to the same controller.
Change-Id: I13d30c12b8e0ce38eae687f9e76740be1d11e4d1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3259
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change NVMe bdev module to enable abort as IO type.
Change _bdev_nvme_submit_request() to process abort request when the
IO type is abort.
The current thread tries aborting I/O command in the I/O qpair first.
If no I/O command to abort was found, send message to the thread which
is registered when creating controller. The controller thread tries
aborting admin command in the admin qpair next. If no admin command
to abort was found, complete the abort request with failure.
spdk_nvme_ctrlr_cmd_abort_ext() is used to try aborting command whose
cb_arg matches. qpair is set to NULL when trying to abort admin command.
Before calling spdk_nvme_ctrlr_cmd_abort_ext(), save the current
thread to process admin command completion correctly.
spdk_bdev_abort() supports any bdev module other than NVMe bdev
module and does not check CDW0 but checks only if the completion
status is success or failure. So add bdev_nvme_abort_done() and
converts the NVMe completion status to the bdev completion status.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6aebae0ba2f6c5834ee926e161af9c4d825f341
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread pointer to struct nvme_bdev_ctrlr. The thread which
created nvme_bdev_ctrlr is set to the pointer.
The thread pointer will be used to limit only one thread to submit
admin abort.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia39d5cbc7a13b0e0022c0d5591069ea8776ef774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3244
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For base bdevs, we maintain a global list g_opal_base, and
for part bdevs, there is also a global list g_opal_vbdev,
so it's not necessary to use the configuration again, just
unpack it to opal part bdev.
Change-Id: Ia0943610dee3c194a80e44ed8eed8f2370d780fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3106
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The base bdev's reference number is maintained in the bdev
layer, so we don't need to maintain it in this module.
Change-Id: Iffadbde2dbf35d934f273fdcb4b7d19e96394343
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2986
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
The error message is:
bdev_nvme.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
456 | int rc;
Reason: The CI testing pool will always use --enable-debug, but without this
flag, we will see complilation warning.
If we really want to catch this, it is better to really use this rc variable and print
some information.
Change-Id: Iec0ffcec4ec091d36044e3b36a9ac85e677b5c70
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3001
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdb43a726969fede4665f2fe59723dd90c5dad0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2883
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
IO device "bdev_nvme_poll_groups" is not unregistered in the finish
module, so we need to unregister this io device, since the "nvme_if"
is staic variable in bdev_nvme.c, it's can't be accessed in common.c
so we use "g_nvme_bdev_ctrlrs" instead.
Change-Id: Id4675f5acc8f386609903497da5ca84bf8af3a15
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2035
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is always going to be true because of the
context we are in when calling this function, but
add an assert just to be safe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ifbd075865a191529eb9e656c360f182dba8a85bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1985
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adjusts several return codes to provide
more than just -1.
Along with fix to json rpc error print,
where negative error code was passed to spdk_strerror().
Resulting in unkown error being reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I254f6d716d0ce587f88cc658163ba049378f3b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1915
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the error cases for spdk_nvme_transport_id_parse_trtype
were covered earlier, so just make this an assert.
fix kw warning 12653.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If0eea934764b35d097887b98b0441ae5d7dd3e4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1953
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I reversed the arguments to abidiff when I first submitted
this test which was causing additions to be reported as removals
and vice versa.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iac50243f7cda7c1f9c2302af13a34eca844e0689
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1705
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
This change is aimed at fixing github issue #1312 where we are
apparently calling the nvme_bdev_ctrlr_destruct function more than
once.
In the previous implementation, if a controller was resetting for more than
one iteration of the poller, a second iteration of the poller would get
registered.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ica01ecb21d76ea4f60624efd780bf4eea957c277
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit 8c1d107 added a new erase API and renamed the original
API with "secure_" prefix according to the specification, as the
secure one will not cryptographically erase user data, due to
the limitation from the drive, only the secure API can be
supported, so changing the caller to use the original again.
Change-Id: I25cb054e728065d9ae9c6c30aa0ab374d60cf6f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will eliminate one calloc() and add one small code cleanup.
Change-Id: I3d67f2b073a46e04304ae5342974afecf532794b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sending large amounts of data from host to the controller with 1s
admin polling time, take a lot of time (e.g. 1M firmware file in 4k
chunks takes ~17min).
Reducing this time to 10ms whole operation takes about 3s.
Change-Id: I2dabe9f60acab57e348c34bfabc3cc7479dedec9
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The adminq poller could get a failure if the ctrlr has
already been hot removed, which starts a reset.
But while the for_each_channel is running for the reset,
the hotplug poller could run and start the destruct
process. If the ctrlr is deleted before the for_each_channel
completes, we will try to call spdk_nvme_ctrlr_reset() on
a deleted controller.
While here, also add a check to skip the reset if the
controller is already in the process of being removed.
Fixes#1273.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20286814d904b8d5a9c5209bbb53663683a4e6b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This isn't in the performance path, so using the mutex
here makes it a bit more consistent with other ctrlr
members such as 'destruct'.
This prepares for a future patch which will defer
ctrlr destruction on removal if a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica019cd90dc3b46ef6a13dd311054dbdc95855aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make sure a namespace is depopulated only once all outstanding commands
generated by the media manegement poller to that namespace are completed.
It fixes the use-after-free errors reported by asan during shutdown.
Fixes#1251
Change-Id: Iab99b594756cee2d41235c70194bcaa5f5e1fb0b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Id1299bb0d86db57bce48b9787d7f248d29a6f345
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/974
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added population checks before any media event processings is performed,
as a namespace can get depopulated at any time. This will guarantee
that depopulated namespaces are never touched.
Change-Id: I071404158e099b5f3195c1e3e50563b22cdf5c59
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/921
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Was using the ch provided at submit, needs to use the base ch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I383eb418a6448b829c25da5eb2f75a9420475ca2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When structure for output of json decoders in not initialized
spdk_json_decode_string may fail trying to free uninitialized
string.
This patch changes mallocs used to allocate context and structure
for output of decoder with calloc.
Fixes#1151
Change-Id: I180b2ec52350b4ca90e7c318b4f2d13af554ec49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483107
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
bdev_nvme_comparev_and_writev function takes as an argument
only iovs for compare operation and uses them for write
operation. It should also take iovs for write operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I5be2610c3d8552559aa4db969d5acb78b1620079
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an issue in the hotplug poller where it would fail to
probe the added/removed nvme pcie devices due to an error trying
to find the PCIe transport type. This happened because the
`struct spdk_nvme_transport_id` needs to have its trstring filled in
after a change was made to get transports by name to allow for custom
transport types. This change fills in the trstring so that downstream
checks correctly pass.
Fixes#1159
Change-Id: I35d2834f3ba58a8e6f8e91d290c1f4cb9c158e5a
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each namespace should be checked if it is populated when handling chunk
notifications. Otherwise we risk segfaulting if a namespace gets
depopulated before the notification callback is executed.
Change-Id: Ic55104a52087b1ea7090eeaede3e2221682cd331
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482410
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there is an error returned from low level driver, we should unregister
the poller and free the context, or it may get double free when reaching next
poll round.
Fix issue #1156.
Change-Id: I34ca605f11249b885756d761291aebbb7a382d7e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482215
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Compare and write fused operation num_blocks should
not exceed value of 'atomic compare and write unit'.
In case of NVMe native support we should read this
value from 'namespace atomic compare and write unit'
if set in namespace identify data, otherwise from
'atomic and write unit' field in controller identify
data. If bdev does not support this natively we should
set this value to 1.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib1ea02dbf9d1eed476d9dd0114ea96b1376e0c45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used for NVMe which supports
fused commands natively.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I5c41d98e1830ea9e14a521ccb06c6e9284857eb6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477026
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_ftl is virtual bdev now and is not associated
with nvme_bdev anymore so ftl_managed flag could be
removed.
Change-Id: I720e05aed9c36a9d36079276fbd27fe9ad70c0c0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch changes FTL bdev to vritual bdev.
Change-Id: I7b96af56053874b670a76b910a846837396119d9
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479703
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch replaces NVMe Open Channel API usage
inside FTL library with corresponding zone bdev
API calls. This include following calls:
- spdk_nvme_ctrlr_cmd_get_log_page -> spdk_bdev_get_zone_info
- spdk_nvme_ocssd_ns_cmd_vector_reset -> spdk_bdev_zone_management
- spdk_nvme_ns_cmd_read -> spdk_bdev_read_blocks
- spdk_nvme_ns_cmd_write_with_md -> spdk_bdev_write_blocks
Change-Id: I1b5a6863d9ce72f4af1cfbb0e449fc1a5b638144
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
