We will have ANA state per listener and per subsystem. On the other hand,
NVMe specification defines ANA state per controller.
However, it is possible that I/O qpair and admin qpair are different
listeners on a single controller.
Let's check if I/O qpair is on the same listener as admin qpair if
ANA reporting is enabled.
The case that I/O qpair is on a different listener from admin qpair
is not usual and so the purpose of this check is just to guard SPDK
from any unexpected behavior.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb8d255de7f998e45a59a120c2ed5803258873f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4026
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Find the subsystem listener whose trid matches req->port->trid when
creating a controller, and store it in the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea343b8d8ae827b554df2245b67aed113469c592
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add trid to struct spdk_nvmf_qpair and initialize it at initialization.
admin_qpair->trid will be used to get the corresponding
subsystem_listener via nvmf_subsystem_find_listener() and add it to
struct spdk_nvmf_ctrlr in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d1a41aede60de88747eff16c7e04f63d0702596
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4009
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The new function () will be used in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I788cfb38d75c3f1f64e1754912b776a80f0f1be8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4007
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We stopped the poller to early, so we were not able to
reap all completions on ibv CQ, so RDMA qpair was not freed.
This patch stops the poller when all references to poll group
are released (all qpairs are destroyed)
Fixes#1578
Change-Id: I15c1697db13aef9da7567c7312476306c3ee1d62
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3962
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ANA transition time shall be non-zero if controller supports ANA
reporting. Linux NVMe host sets this value to 10, and we don't
have any reason to change from that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61396695dacf47fad40e3cea3311e555729d9e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3909
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used in another place later.
This patch is part of a series aimed at improving recovery
when we are fail to change the subsystem state.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24bfbeb3d006584003164540d6ede540dbcafa86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3392
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Failed qpair will be destroyed on generic nvmf layer during handling
of error code returned from spdk_nvmf_poll_group_add.
The current approach leads to heap-use-after-free.
Change-Id: I99331150fa36a3c3c18176589afb973dee449b3a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3538
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently rdma acceptor handles only one ibv event per poll
Taking into account the default acceptor poll rate (10ms), it can
take a long time to handle e.g. LAST_WQE_REACHED events when we
close huge amount of qpairs at the same time.
This patch allows to handle up to 32 ibv events per acceptor poll.
Change-Id: Ic2884dfc5b54c6aec0655aaa547b491a9934a386
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3821
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK poller uses microsecond as the input parameter, so we need to
change the correct value when opts.association_timeout is expressed
by millisecond.
Change-Id: Ia674f0115ea176b998e4c0c70b8ce75b28984701
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3861
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After supporting ANA reporting by default, Linux kernel 5.3 reported
error when parsing NVMe ANA log. The newer kernel fixed the issue
but we should optionalize ANA reporting feature to avoid error for
Linux kernel 5.3 or before.
Add a bool variable ana_reporting to struct spdk_nvmf_subsystem
and disable ANA reporting and initialization of related variables
if it is false. We can expose MNAN (Maximum Number of Allowed
Namespaces) even if ANA reporting is disabled. But MNAN is not
required if ANA reporting is disabled. So do not set MNAN if it is
false too.
Add a public API spdk_nvmf_subsystem_set_ana_reporting() to set
ana_reporting by the nvmf_create_subssytem RPC.
The next patch will add ana_reporting to nvmf_create_subsystem RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc77773b4c9513daba2f1a9fdaf951d80574f379
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC, nvmf_subsystem_get_controllers to retrieve the list
of NVMe-oF controllers of an NVMe-oF subsystem.
One of the main use cases will be to get identification information
of NVMe-oF controllers to configure their ANA states dynamically.
Pause and resume the subsystem to access the controllers safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME explicitly to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf8d1cf56850a705e343b86022d101b4c7204199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3848
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A subsystem RPC is not transitioned to a paused state when there
are ios outstanding (tracked by subsystem poll group).
In general AERs, are not tracked as outstanding IOs. However,
there are 3 paths in nvmf_ctrlr_async_event_request which do not
adjust the outstanding io count.
If we get into any of these 3 paths, the subsystem pause can hang
forever.
The issue was reproduced with hot plug stress testing under load.
We can get into the second path (SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE)
under these circumstances:
- An AER completion is sent to the initiator due to a namespace change
(e.g. hot remove/add)
- In this case, type is set to SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE
- The initiator sends a new AER admin command, hitting the second path
where we return without adjusting the outstanding ios.
Fixes: 1552
Change-Id: I45f781966cc1e9a601b2305c7985a21154d802e8
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3854
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Generally, this patch did the following work:
Remove the destruct poller. I think that we do not need this,
the destruct poller is specially for Softwaare RoCE case.
Since SoftRoCE will not have IBV_EVENT_QP_LAST_WQE_REACHED event,
we will not wait the last_wqe_reached flag when srq is enabled.
So we can avoid using the poller.
And the purpose of this patch is to solve the coredump issue.
For example, if we run rdma local test such as, e.g.,
test/nvmf/host/bdevperf.sh --transport=rdma
The coredump reason: the qpair is freed twice. Because for RDMA transport,
we do not really remove the qpair from the group if the upper layer
does it.
The first time is called by nvmf_rdma_destroy_drained_qpair in nvmf_rdma_poller_poll,
and the second time is called by nvmf_rdma_qpair_reject_connection in
in nvme_rdma_close_qpair. Since nvme_rdma_close_qpair will always called,
so we need make sure that the qpair will be close after calling this function.
Otherwise we will have the double free qpair. So our approach here is add a flag
("to_close")in rqpair structure and make sure the rqpair be freed after the
"to_close" is set nvme_rdma_close_qpair
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6f97debbcd29bbb7c6e3f9725907b4102a1d2892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3661
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Helps us avoid adding a new I/O qpair while the ctrlr
is being destroyed.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3bf9318b075125b9d432b885fa9f6f2f44d422d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3686
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This data structure is not used.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I143fb9256f692d7bd9bb5e14cdc479f64ddcef45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3746
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Retrieve actual IBV state when we receive WC with bad status
2. Don't log an error if WC status is IBV_WC_WR_FLUSH_ERR. This
means that we are performing qpair cleanup and this WC is expected.
Change-Id: Id23634092f537861e66ca0f83ab79db9e052507b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3736
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From the time a shutdown is initiated the controller shall disable
Keep Alive timer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Id499dabce1913b9da2f0b3fd961fdfc8b621afa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3462
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After CC.EN transitions to ‘0’ (due to shutdown or reset), the
association between the host and controller shall be preserved for at
least 2 minutes. After this time, the association may be removed if
the controller has not been re-enabled.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I4734600067fd4b7306b46f1325fdd5031e81c079
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2984
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This call can be made directly now that
spdk_nvmf_qpair_disconnect is thread safe. It's
actually better that we do it this way, because
the qp destruct call is guaranteed to block until
the ib events associated with it are acknowledged.
this means that by processing the disconnect before
we ack the event, we will have valid memory to do
the atomic checks.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If6882b7dc568fe4c35f4a35375769634326e9d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3681
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should use this function as the synchronization point
for all qpair disconnects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic685ac3481765190cc56eeec3ee24dad52e336c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3675
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF controller creates a ANA group for each namespace,
ANA group ID matches namespace ID, and default ANA state of ANA group
is optimized, and the MNAN field is set equal to the NN field.
If a ANA log page contains multiple ANA group descriptors, it has
one or more descriptors will not be 8 bytes aligned. Hence we create
one descriptor and copy it to the ANA log page at a time.
Change count will be supported later.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ba6aa78983480caa3dfbf22aefc9aeabfd5405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the pdu management consistent with other PDUs, then
we can easily adapt our code into some hardware offloading solution.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic4a2847fd1b6cacda4cbaa52ff12c338f0394805
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA target can't handle bidirectional xfer type, in debug build
it throws an assert in nvmf_rdma_setup_wr function. NVMF controller
performs checks od opcodes, but the failure happens before this
check. Add similar validation in TCP transport.
Change-Id: I14400b9c301295c0ae1d35a4330189d38aeee723
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3436
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
CC.EN, CSTS.RDY should not be modified during shutdown.
It doesn't make much sense (against nvme spec) and nvmf spec 1.1
doesn't mentioned it (4.6) either.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7014b10b0217db61c3d380d5c0843808e54577cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3477
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently we don't resubmit receive request associated with AER
request to SRQ. This leads to reducing of SRQ elements and may
lead to non responsive NVMF target.
Fixes#1507
Change-Id: Ie96f8c4be0202ae973e561ebe5ea28688a6a3b72
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since rqpair->qpair.group is set to NULL when we remove the
qpair from poll group, we fail to send event to qpair's thread.
This patch adds a pointer to io_chaneel to spdk_nvmf_rdma_qpair
structure and a function to handle poll_group_remove transport
operation. In this function we get io_channel from nvmf_tgt,
this channel will be used to get a thread for sending
async event notification. This also guarantees that the thread
will be alive while we are destroying qpair.
Change-Id: I1222be9f9004304ba0a90edf6d56d316d014efda
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3475
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new abort functionality doesn't take custom admin cmd
handlers into account.
This commit allows setting a custom admin cmd handler
for abort that provides the ability to influence the
bdev lookup to which the abort is sent to.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I3a66c6f863f5ee4d89cb2194dffdc6855945fa8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3485
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct spdk_nvmf_request holds req_to_abort and so passing req_to_abort
separately is not really necessary now. The internal API
nvmf_ctrlr_abort_request() was added at the stage of prototyping.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ef2467d6f92422f044650c62a0777b95c0fc1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3488
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no reason to continue processing these requests if the
qpair is not still active. We should complete them and free
any resources they are still holding.
Also, not doing so can cause issues with trying to access pointers
in the qpair after they are invalid. See issue #1460.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6e570a576983dfedf726dc4a9a83316209403e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b43e79c3b0d9c53ed04b01a9eaa9b117b32d81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3013
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to tqpair->group->group.pending_buf_queue.
If the state of the request is DATA_TRANSFER_TO_CONTROLLER_PENDING,
the request is queued to rqpair->pending_rdma_read_queue.
If the state of the request is DATA_TRANSFER_TO_HOST_PENDING,
the request is queued to rqpair->pending_rdma_write_queue.
According to the current state, dequeue from the corresponding
queue, and then call an new helper function
nvmf_rdma_request_set_abort_status().
Using helper function will be easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0327f4d2c4728a11b3b6bbc7c2252f0b35263cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3012
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_rdma_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS, or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1462a21db7270f3d63f8f293ad4be61d52e74da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3011
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98347b68e8b6b4a804c47894964cb81eae215aaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3010
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to both tqpair->group->group.pending_buf_queue and
the queue per state.
If the state is AWAITING_R2T_ACK, the request is queued to the
queue per state.
Dequeueing from the queue per state is done in
nvmf_tcp_req_set_state(). Hence explicit dequeuing only when the
state of the request is NEED_BUFFERING.
Most abort operation is common between two cases. We can use fallthrough
in switch-case but factor out the common operation into a helper
function nvmf_tcp_req_set_abort_status() instead because we may use
the helper function in future and using helper function is easier to
read than fallthrough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1695b084d5d1f2537fbdd512bc3cd136e0f6a65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3009
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_tcp_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1abceecc211ee79d8ac18a82dc63b13d313a6f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3008
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out abort operation on the specific qpair into a helper
function nvmf_qpair_abort_request().
After this refactoring, nvmf_ctrlr_abort_done() calls
_nvmf_request_complete() only if the passed status is zero.
If the passed status is not zero, nvmf_qpair_abort() is responsible
for calling _nvmf_request_complete() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4828c0e21cc7650210675661d6e1c0fd54c7a2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Description is not clear but according to the NVMe specification,
always set the completion status to success and differentiate only
the bit 0 of CDW0 between success and failure for abort command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0195e72fe1d7fcc2592f47e9dcf92ac56912282c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1965
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Logic error Dereference of null pointer ctrlr.c
nvmf_ctrlr_async_event_request 1522
Dereference of null pointer is not possible if sgroup obtained using
ctrlr obj. Adding corresponding asserts suppresses the warning.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I78b32fadd5449ee9b533f65193c70e55cf9a8f1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3251
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It should return "NVME_TCP_PDU_FATAL". I think that
this issue is introduced after we move the data
copy from tcp transport layer to the socket
layer. And it should return "NVME_TCP_PDU_FATAL now",
and it will be consistent with the logic in the same
function.
With this patch, it will fix the big I/O size write
from the initiator.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide018adb603eb13d002fc98886258dd1e2424f7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
10 is kind of unreasonable. You could easily start
seeing failures if you had just 3 intiators trying to
connect with 4 io qpairs at once.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9985ffa3b03ebb33880eb5934b60eaafab57c82d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rdma_qp may not be initialized when qpair is not fully
created. When such a qpair is being destroyed we may pass
a NULL pointer to spdk_rdma_qp_disconnect or spdk_rdma_qp_destroy
and hit an assert. This patch fixes this problem for NVMEoF
target and initiator.
Change-Id: I84787dc1b1211293c2a19f59d47727eaecd9d5a1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3050
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe driver had processed ACL as 1's based value by mistake,
and SPDK NVMe-oF target sets ACL to 0. Hence If NVMe driver connects
to SPDK NVMe-oF transport, spdk_nvme_ctrlr_cmd_abort() always queued
abort request.
Fix this bug to process ACL as 0's based value in
spdk_nvme_ctrlr_cmd_abort(). Besides, initialize ACL explicitly to
0 in spdk_nvmf_ctrlr_identify_ctrlr() for clarification.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id4f3a469776cdab88bcc6f41e7893885a7b78d8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These dependencies were removed in patches that added
RDMA provider. It was incorrect change since it causes
SEGFAULT when SPDK is built with shared libraries
Change-Id: I15f4ff86a75b3d080e1c7c89d75af4959c4ed989
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2900
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recently support for multiple AERs was added to lib/nvmf, but the fc
transport was not updated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1755fdc4a6db2c6ce751c34fe5ad1d43e30298f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When read I/O to the controller failed, clear
rdma_req->num_outstanding_data_wr to zero to avoid
rqpair->current_send_depth goes to negative after completing data
transfer to the host.
This bug was apparent when the outstanding read I/O was aborted.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62e439f946ef81ea0b5de5280670ed97fe8d977f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2341
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
struct spdk_nvmf_fc_rq_buf_ls_request does not need to be marked
as packed. The static assert that immediately follows will catch
any inserted padding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id11ac9865a9c60f6d147d0f829d272ca791d0336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2683
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
These returns at the end of functions, so remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1f54d812956727e1871f4879c8bc9a526d7d14c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Include completion operation into nvmf_qpair_abort() and rename
it by nvmf_qpair_abort_aer() for clarification. Update unit test
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I763cc7d24b979e27e8775f4e69730466a2351bdf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2712
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_ctrlr_abort_aer() has not been used anywhere, and so we may be
able to remove it, but let's update it to set the completion status
of the aborted AERs to ABORTED for future potential use cases, and
then rename it by nvmf_ctrlr_abort_all_aer() to avoid name conflict
with the next patch.
Setting the completion status to SUCCESS is not good in this case
anyway.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie49936429b82dd05724cf8f10a1417e9c5304635
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2709
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some cases need to redirect spdk_nvmf_request_complete() to the
thread pointed by qpair->group->thread. Abort command will be
included such cases but abort command is executed in the different
file ctrlr_bdev.c. For the convenience, change spdk_nvmf_request_complete()
to include the redirection and extract the core operation of
spdk_nvmf_request_complete() into a private function
_nvmf_request_complete(). In ctrlr.c, call _nvmf_request_complete()
for non-redirected cases.
Besides, locate the definition of _nvmf_request_complete() under the
definition of spdk_nvmf_request_complete() in a file to trick the format
check tool to avoid false positive, and fix a spell error together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I85546c80e99e01686c9470653e0ddafcf7c6a391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Useful for transport specific layer to inform that SGLs are not
supported or to adjust settings.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia849f5af206538408664fd20ea4e7dcb9da6f6f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using an inline function to decrease the aer notification code.
It also can benefit from adding new async events later.
Change-Id: Id0f7c57fd66ade303c625d1d1af10d41dead8994
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2547
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix potential bug. In nvmf_ctrlr_abort_on_pg(), when run into
the request_complete it can trigger this bug because in nvmf_qpair_abort
the ctrlr->aer_req was set to NULL.
Change-Id: I37a7e3c76c6616ca4ecbc6d9d2776ee32449c796
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2545
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we don't use SRQ and close a qpair, we will receive completions
with error status for all posted ibv_recv_wrs. This is expected and
we don't want to log an error, use debug severity in this case.
Fixes#1387
Change-Id: Ia8efb8f24628880454fab1d7f6188e7b31cffb67
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were 50 functions and 5 variables that were previously
exported in the library which are actually private symbols.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I08c47255cdefff5948c914b0782e872c28c27130
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2291
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When using spdk_nvmf_request_exec_fabrics() to connect one IO
queue, the qpair->ctrlr is null before this function, and the
qpair->ctrlr will be set to associate controller after the
connect, so it will check the sgroup->io_outstanding count,
then we can hit the assertion.
Change-Id: I747cbfd0541cd12286dab549cd02245aac54f2db
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2062
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In SPDK NVMe/TCP target, when initializing the socket, the low
watermark is set to sizeof(struct spdk_nvme_tcp_common_pdu_hdr),
which is 24 bytes. In our testing, some times there might be very
small data packet (as small as 16 bytes) be sent to wire. After
this, if there is no more data sent to the same socket, this small
data packet won’t be received by NVMe/TCP controller qpair thread
because the size hasn’t reached the low watermark. Because of this,
the qpair thread is waiting for more data come in and the initiator
is waiting for the IO request to be completed. Hence the delay
happens.
As the minimum data that allows target to determine the PDU type is
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes, we
changed low watermark setting as below. With the change, the problem
was gone immediately.
Change-Id: I14ccc4c84b77e33a617726e7455304aca29d5d57
Signed-off-by: Wenhua Liu <liuw@vmware.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2138
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hit assert when completion is done is response to internal connect
cmd. Fix by outstanding counter incr, add missing err handling.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2ba71f83432831fc043f2b6f6a5cba024045068b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1902
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also lets us get rid of the set_ibv_state function
since rdma_disconnect does the transition to the error
state for us.
rdma_disconnect triggers an RDMA_CM_EVENT_DISCONNECT on the
initiator side. This is important so we know when qpair ids
can be reused on the initiator side.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I87b80797c84ffa1d2cbe94cf37316b1b674b6c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1878
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Historically, we have immediately called the qpair
fini function directly from _spdk_nvmf_qpair_destroy.
However, to fix a race with initiators where we can get
a duplicate QID from the initiator, we will have to clear
the QID bit before calling qpair_fini. Clearing the QID bit
must be done on the controller thread, so we have to pass at
least two messages between calling _spdk_nvmf_qpair_destroy
and qpair_fini. This leaves a gap where we can poll the poll group
and reap completions for the qpair before we call qpair_fini and drain
all of the requests related with the qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I337a0608f88fdda132b8a629a508c0263d2261c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
The code used to do this but it was removed when the buffering was
shifted down to the posix layer. Add a way for users of sockets
to still properly size the buffers.
This also means that by default, the receive buffering is not enabled
on sockets. That matches the behavior of the previous release.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I20ce875be2efd841fe3a900047b4655a317d7799
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1560
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's actually faster to process them until you run out of data.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9e81babdb9bdc405a8dbf03b2f701fe50bcc70f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1559
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add FC listen address to target listeners table before attaching the
same to the subsystem listener list. Without this fix, subsystem allow
any listener provision which is very important to FC-NVMe is broken.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I06436c0a73e65cb5f7bb3280658fcf200b975989
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently SPDK rejects Connect command when subsystem is not active.
This change allows to queue Connect command and execute it when
the subsystem goes back to active state. To queue the command we
should know subsystem_poll_group, in current implementation
this poll_group is known only when controller is already created.
To get the poll_group for Connect command we can retrive subsystem
subnqn, find subsystem and get poll_group by subsystem->id.
Increment subsystem_poll_group->io_outstanding even for Connect
cmd in order to prevent subsystem change state during the
connection process. Update spdk_nvmf_request_complete -
decrement io_outstanding for Connect cmd.
Fixes#1256
Change-Id: I724abb911696d7234a9c9d27458eba24739b26fd
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1273
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We callocated the listener, but if we to execute the listening
behaviors which got failed, and all the other resources have been released,
only left listener.
Fixes issue #1326.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I020b509caed79e9880d07b01888ed389630ff67f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_jsonrpc_begin_result() was changed to always return non-NULL
a while ago. Most of the checks were removed from SPDK, but this
one must have been omitted because to its unusual structure.
Change-Id: If305d7a27d8e6bd4dae1aa8221efabba50db1982
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
the nvme, nvmf, and thread libraries have all had public APIs
removed or changed since the API was changed to 2.0 and
backported to 20.01.1 we should rev these so versions to make
that distinction obvious.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Id48454b8d0451794abad4db452b5c4e337b23c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous patch ce6b8a1313
added a wrong assumption that every WC of RDMA_WR_TYPE_DATA
type must point to rdma_req with IBV_WC_RDMA_READ opcode since
RDMA_WRITE operations are non-signaled. However it is wrong
since in the case of error all WRs will have WCs. Revert part
of the problematic patch.
Change-Id: I8d270c5313ebfe1ec44a338820a62f085996eb8f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1334
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The current implementation doesn't log WC status. Remove independent
logs by WR type, use common error log. Besides that add a minor cleanup
in checking of WC opcode for RDMA_WR_TYPE_DATA type - it is always
RDMA_READ
Change-Id: Ifdfc295e804ab3246ec54327afc8a5a37aca1d55
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d50736776c.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I7cf477333f2a3fa4a0089394d5fa28142b262a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 5e7b8d18f3.
This code is moving from the nvmf target down into the posix
sock layer in this series.
Change-Id: Iea9a7cef5bedd6a34edf7b4c87825897279829c3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It was probably miss-interpretation of description from discovery log
page which refers to min admin max sq size.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I575bf7fd6beb904b3a38a07616b76a34f8365643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix Segmentation fault on the target side.
Issue:
rdma.c:2752:spdk_nvmf_rdma_listen: *NOTICE*: *** NVMe/RDMA Target Listening on 192.168.35.11 port 4420 ***
rdma.c: 789:nvmf_rdma_resources_create: *ERROR*: Unable to allocate sufficient memory for RDMA queue.
rdma.c:3385:spdk_nvmf_rdma_poll_group_create: *ERROR*: Unable to allocate resources for shared receive queue.
Segmentation fault (core dumped)
GDB:
Program terminated with signal 11, Segmentation fault.
736 if (resources->cmds_mr) {
(gdb) bt
736 if (resources->cmds_mr) {
(gdb) bt
0 nvmf_rdma_resources_destroy (resources=0x0) at rdma.c:736
1 0x0000000000497516 in spdk_nvmf_rdma_poll_group_destroy (group=group@entry=0x2fe1300) at rdma.c:3489
2 0x00000000004978bb in spdk_nvmf_rdma_poll_group_create (transport=0x2fe11d0) at rdma.c:3371
3 0x000000000048df70 in spdk_nvmf_transport_poll_group_create (transport=0x2fe11d0) at transport.c:267
4 0x000000000048a450 in spdk_nvmf_poll_group_add_transport (group=0x2f49af0, transport=<optimized out>) at nvmf.c:941
5 0x000000000048a6cb in spdk_nvmf_tgt_create_poll_group (io_device=0x2fce600, ctx_buf=0x2f49af0) at nvmf.c:122
6 0x00000000004a0492 in spdk_get_io_channel (io_device=0x2fce600) at thread.c:1324
7 0x000000000048a0e9 in spdk_nvmf_poll_group_create (tgt=<optimized out>) at nvmf.c:723
8 0x000000000047f230 in nvmf_tgt_create_poll_group (ctx=<optimized out>) at nvmf_tgt.c:356
9 0x000000000049f92b in spdk_on_thread (ctx=0x2f81b20) at thread.c:1065
10 0x000000000049f17d in _spdk_msg_queue_run_batch (max_msgs=<optimized out>, thread=0x1e67e90) at thread.c:554
11 spdk_thread_poll (thread=thread@entry=0x1e67e90, max_msgs=max_msgs@entry=0, now=now@entry=947267017376702) at thread.c:623
12 0x000000000049af86 in _spdk_reactor_run (arg=0x1e678c0) at reactor.c:342
13 0x000000000049b3a9 in spdk_reactors_start () at reactor.c:448
14 0x0000000000499a00 in spdk_app_start (opts=opts@entry=0x7ffc2a5e0ce0, start_fn=start_fn@entry=0x40aa80 <nvmf_tgt_started>,
arg1=arg1@entry=0x0) at app.c:690
15 0x0000000000408237 in main (argc=5, argv=0x7ffc2a5e0e98) at nvmf_main.c:75
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id9bf081964d0cf3575757e80fc7582b80776d554
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1073
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To avoid the strange formatting, typedef has been used. But this
comment is hard to get the meaning. So stop breaking after return
type for this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia03d6ec50610c395007fe172018b890733dce599
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the spec, if the CC.EN bit is transitioned from 1 to 0,
then all of the I/O qpairs shall be disconnected and the csts.rdy bit
shall be set to zero.
Change-Id: I871170e79e08a9fab8286f9c135c7b3316f58ace
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a way for the transport to query the value of the controller
registers.
Change-Id: Id365ff088989f6f8e74e26ff6f3d435f35bee2f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The first 4 or last 4 bytes of an 8 byte property can now
be written independently.
Change-Id: I894f8349be836511c18c380262eae46951060766
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
qpair might be deleted with incomplete requests (e.g. when NIC
is removed or when huge amount of qpair are being destroyed
simultaneously), this reduces the capacity of the transport
buffers pool. Check that qpair qd is nonzero and process
requests whose state is not FREE. Processing of requests
when qpair is being deleted leads to their release.
Change-Id: I0e42b5cb78f35add9f37942db77781db72c1e59c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Destroy subystem if spdk_nvmf_subsystem_set_sn or spdk_nvmf_subsystem_set_mn
failed. Check status in spdk_rpc_nvmf_subsystem_started callback, destroy
subsystem and report an error on error.
Fixes#1192
Change-Id: Id6bdfe4705b5f4677118f94e04652c2457a3fdcc
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is meaningless for network devices, but will be useful
when emulating the more complete register state of local devices.
Change-Id: I37052e514101c298a1f66cc72135a8c3dd669003
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This doesn't do anything for a network fabric, but it doesn't
hurt to allow these commands to set the emulated register
values for AQA. This will be more useful when emulating a
physical NVMe device.
Change-Id: I2891d7a07a5dceff50c6d66a8ce0b6b7c22a79f8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The custom command handlers are registered by outside software.
Move the implementation from lib/nvmf to the nvmf_tgt application
to match the intended usage.
Change-Id: Iedb7ae5356f195dfb5bb465975808c8749d16f32
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a public header that needs to be accessible to
code outside of the SPDK project. The spdk_internal/
directory does not end up getting packaged - it's just for
headers used by multiple libraries within SPDK.
Change-Id: I14e1ab4fda4b0ee779203d190a266240b10be6ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/413
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines the official interface that NVMe-oF target
transports may use. For now, all code is just copied
from elsewhere. Eventually we'll want to add doxygen
comments.
Change-Id: I0cd9368607544be18c7c49188d071e38ceb59b8f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ibv_query_qp can return nonzero value if e.g. we received
IBV_EVENT_DEVICE_FATAL. Remove assertion not to break SPDK
in debug mode
Change-Id: I00b3bef448a69e2f43ee90e5466b2d78b55d8a08
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This event can occur for either qpair or listening device. The
current implementation assumes that every event refers to a qpair
which is wrong. Fix: check if the event refers to a device and
disconnect all qpairs associated with the device and stop all
listeners.
Update spdk_nvmf_process_cm_event - break iteration if
rdma_get_cm_event returns a nonzero value to reduce the
indentation depth
Fixes#1184
Change-Id: I8c4244d030109ab33223057513674af69dcf2be2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It fixes memory leak e.g. when add_listener rpc called twice with the
same trid on the same subsystem (ref = 2). In such case kill or
remove_listener decrements ref only once.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib19f2e50838feff1c9108957ee82a42da66e54a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some functions performed incorrect header/data digest
support check, align it with NVMEoF spec. Use a table
to check if PDU supports digest depending on its type.
Change-Id: I6170dd19ace017f37fda0a923f604732799460b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483375
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It allows to property set (e.g. cc) when subsystem and qpair are not
active.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0b0d150fbdac5bdf0d20762337f0a811f4d6d243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481494
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This internal interface allows to create nvmf ctrlr and connect io
qpairs on add listener rpc request (i.e. when subsystem is stopped
and listener is not yet on subsystem's list).
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I998cb72ed773094faacc6668cf069ba9e2a6bf50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481409
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Had to remove one part of a unit test because the null
checking is moved to a different function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0a95d0a9a9a5708416fdc7efefb36e17b1ffe010
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The fuse command value is a two byte value, but we were only checking to
see if the fuse value was equal to SPDK_NVME_CMD_FUSE_FIRST or
SPDK_NVME_CMD_FUSE_SECOND in spdk_nvmf_ctrlr_process_io_fused_cmd. If a
haywire initiator sent a command with a fused value equal to
SPDK_NVME_CMD_FUSE_MASK, that would result in us skipping all checks and
dereferencing a null pointer in
spdk_nvmf_bdev_ctrlr_compare_and_write_cmd.
To fix this, add an extra condition to validate the cuse field.
Change-Id: I1ec4169ff5637562effd694f7046c6e3389627f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483123
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When a command arrives and no requests are available, the socket
recv state machine sits in the RECV_STATE_AWAIT_REQ state until another
network event occurs. If this I/O was the last one sent, this leaves the
target hung. To fix this, when a request is completed, kick the state
machine to make forward progress.
In practice, this can only occur once the pdu send acknowledgements are
asynchronous relative to arriving commands. That only begins happening
with the use of MSG_ZEROCOPY. When MSG_ZEROCOPY is turned on, it's
possible receive the next PDU in a chain for a command prior to seeing
the acknowledgement that the response that triggered that PDU actually
sent.
Change-Id: I556f31ad56970d36aa3538cfde375d35f3d4e551
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480002
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, the R2T was sent and if an H2C arrived prior
to seeing the R2T ack, it was processed anyway. Serialize
this process.
In practice, if the H2C arrives with a correctly functioning
initiator, that means the R2T already made it to the initiator.
But because the PDU hasn't been released yet, immediately processing the
PDU requires an extra PDU associated with the request. Basically, making
this change halves the worst-case number of PDUs required per
connection.
In the current sock layer implementations, it's not actually possible
for the R2T send ack to occur after that H2C arrives. But with the
upcoming addition of MSG_ZEROCOPY and other sock implementations, it's
best to fix this now.
Change-Id: Ifefaf48fcf2ff1dcc75e1686bbb9229b7ae3c219
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was only called from one spot.
Change-Id: I856f564d3ef6c6157be7a32a2cd812c702516a8d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems like a more descriptive name
Change-Id: Ia616865b3fb36d8f9ccc5fb2ca6185bdd8543cf8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
With our target design, there's no advantage to sending
multiple R2T PDUs per nvme command. This patch starts by
setting up the math so that at most 1 R2T PDU is required
per request. This can be guaranteed because the maximum
data transfer size (MDTS) is pre-negotiated in NVMe-oF
to a reasonable size at start up.
It then proceeds to simplify all of the logic around mapping
requests to PDUs. It turns out that the mapping is now always
1:1. There are two additional cases where there is no request
object at all but a PDU is still needed - the connection response
and termination request. Put an extra PDU on the queue object
for that purpose.
This is a major simplification.
Change-Id: I8d41f9bf95e70c354ece8fb786793624bec757ea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479905
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
We can always accept up to the maximum I/O size in an H2C,
so eliminate the #define.
Change-Id: I349dab5f9b6ec482a7c580b1396e03c8d30a250b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482278
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The resources allocated to a queue pair do not need to be directly
correlated to the queue size requested by the initiator in NVMe-oF, as
long as enough resources are present. The RDMA transport, for instance,
does complex pooling of the resources behind the scenes when using a
shared receive queue.
Simplify the resource allocation for a TCP qpair to just always allocate
the max allowed queue size right away. This is a configurable parameter,
so system administrators can adjust for their needs. The initiator may
then request a queue size less than or equal to that, which will only be
enforced by queue depth counting and not impact the actual number of
resources allocated on the target.
This change relies on the MaxC2HSize being equal to the Maximum Data
Transfer Size (MDTS) reported. That is the default configuration, but
MDTS is configurable. Changing the MDTS with this patch to a value
larger than 128k will cause the target to break. This is addressed in
the next patch in this series.
Change-Id: Ibd4723785c6a4d8d444f9b7bbfa89f98de2320f5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479733
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
These values do not need to be negative.
Change-Id: Id9f798cf1c9da354448f9c6fbb90e599f877bb32
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482277
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By releasing the just-completed PDU prior to calling the callback,
for flows that immediately submit another PDU inside the callback,
the just-released PDU can be immediately reused. This reduces the number
of PDUs required in the pool to continue forward progress to half of the
previous value, while also making it more CPU cache friendly.
Change-Id: I8031b8f9f57ac05f261d96433d9899fe5e31d318
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479904
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For ACWU we always set value 1 because bdev holds
information specific for namespace only. This value
actually does not matter because we also set NACWU
which makes ACWU irrelevant. We set ACWU because
NVMe specs requires ACWU != 0 if fused commands
are supported.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ida4357026d3b32677fc824b3cd878e7ad8ef2680
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477915
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add call for spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
function in spdk_nvmf_ctrlr_process_io_cmd function
when fused command is discovered.
This patch also removes redundant defines for fused flags.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I61971a56577ab32b52e1fde1e572f718a9a2d9aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476621
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move fused cmd related code from spdk_nvmf_ctrlr_process_io_cmd
to separate function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic662a968b054f05db7f6e1cf4fa9aa13f6fb7c40
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces new spdk_nvmf_bdev_ctrlr_compare_cmd
function which implements support for compare operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadf402a6441a78ea0e6468f1066c6b0e10e63b9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477782
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces new function that is a part of
upcoming support for fused commands.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I019c587bee7fd0f745ec17c141baf4cb7bf86645
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476611
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change fixes a merge incompatibility between commits
50cb6a04ac and
708ed4fb6e.
Change-Id: I5bc71a3c214667f01de66857cf61b9eb25f6cf6b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482586
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit sets the optional admin command flags
in the identify structure based on whether handlers
for these optional admin commands are specified.
Change-Id: If4aa36a414b0811dafaadbc1094e6c2628d21b39
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479446
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
This was calling a callback for another function which
attempted to release the request. The code only worked because
in the r2t case the cb_arg was set to NULL, and that makes
the request free function do nothing.
Change-Id: Id9ec30ceb0eaa41deb67aa995da5d6f786d9b9f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't actually used. Every PDU only had a single reference.
Change-Id: I8adaa7edeca5fe175aa853c156df741170d76c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479902
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make common code as part of successful return.
In rdma check if already listening first.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib0c87ac11db7daff00dc4042c9e0ab20eb7ffd0f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: With this patch,
(1)We can support using different sock implementations in
one application together.
(2)For one IP address managed by kernel, we can use different method
to listen/connect, e.g., posix, or uring. With this patch, we can
designate the specified sock implementation if impl_name is not NULL
and valid. Otherwise, spdk_sock_listen/connect will try to use the sock
implementations in the list by order if impl_name is NULL.
Without this patch, the app will always use the same type of sock implementation
if the order is fixed. For example, if we have posix and uring together,
the first one will always be uring.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic49563f5025085471d356798e522ff7ab748f586
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478140
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function previously accepted a trtype enum, but needs to be able
to accept a string to support custom transports.
Change-Id: I931aed30ca3be65468552ffa1bb1ef3f91275fda
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This commit exposes some internal functions and enums
in preparation for the custom admin cmd handler functionality.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Iec15c1f3d9cba5db267f6e43f3d929cf382ca8f4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is faster for the kernel to pin memory in hugepages, so allocate
the pdu pool from hugepages. This will help more
with upcoming changes to leverage MSG_ZEROCOPY.
Change-Id: I9ce581acca9c6edb71bd8119258966e3b405db77
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475801
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
All transitions to the EXITING state go through the disconnect function
now
Change-Id: Ia55816351b2998bfef26130b6ffdc4a1010567a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470533
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function can't actually return NULL. It aborts if we get
our math wrong.
Change-Id: Iaf77112addc3c14c70755a56043c5dba3427890d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478911
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use spdk_min to get the copy_len in spdk_nvmf_tcp_send_c2h_term_req.
It confirms copy_len it's not larger than SPDK_NVME_TCP_TERM_REQ_ERROR_DATA_MAX_SIZE
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Id343928e1911e4ab77fca7463f3f0cc55889db30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479118
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The only reason the qpair ever uses the port is to get to
the device attributes so skip the middle man.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib14a97ceaa0c49176027d6c35c5cb2787a845cc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Features are not saveable by the controller as indicated
by ONCS field of the Identify Controller data.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7e5bc2c701f5857e2c1481e8370b070089f88111
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479128
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is useful to have sct and sc on request completion explicitly.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If429123589694ba36111330699fee22238f8a557
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Minor optimisation done by code analysis, both cmd and dif are
overridden in TCP_REQUEST_STATE_NEW.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6bae4ddae175035d029c0693f7e4351b95a296ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The discovery target support the keep alive timeout so
it should also support the keep alive cmd.
Change-Id: I08bd3312c17962c97c96fdd1469246fe97d5e8e7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478016
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent effort to unify NVMe NQN length macro replaced
'FCNVME_ASSOC_HOSTNQN_LEN' with 'SPDK_NVME_NQN_FIELD_SIZE' in
include/spdk/nvmf_fc_spec.h. This change updates the downstream files
which are also affected by the change.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I44e1de50067e11fabacbb69cf1c42331f3339bc8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
It's not wrong, just to keep consistency with other functions.
So remove these.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I833211ea8ee6c6b02c874ea340a3f936a0c4c00f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478684
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The call to update_ibv_state could result in a segfault if the other
thread had already freed the qp and was just spinning on handling the
rdma event. By not updating the qpair state here, I don't think that we
lose any information about the qpair state. Especiallyy since just a
little bit later we update the qpair state to be in error.
There is nothing in the man pages about the cm events changing the ib
state although I imagine they are closely related. I just say that
because I believe that's why the update was originally in that spot.
fixes: GitHub issue #1110
Change-Id: I3f87ff009bc2019464ed7c6920dd71e2b286b3fd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477877
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It will be the expected behavior when the error message will
printed if we use asynchrounous I/O. And the real
error message for not getting the tcp_req is located in
spdk_nvmf_tcp_capsule_cmd_hdr_handle.
Change-Id: I1a608fbd3a04050eacb6cb68eafd50e5128925ab
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
TCP_REQUEST_STATE_NEW is already set in spdk_nvmf_tcp_req_get.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia835f3763cd74ef9b504901c719d9954317f49af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476164
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This eliminates the flushing logic, simplifying the tcp
transport.
This also happens to greatly improve performance, especially
on random read tests. The batching done in spdk_sock_writev_async seems
to be more effectively than the previous batching logic in the tcp
transport.
Change-Id: Id980ac6073e380dc75f95df3f69cb224f50fb01b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470532
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA qpair might be destroyed by defunct timer, so it can have
active recv elements in incoming_queue. This queue is cleaned
incorrectly, so recv element for the destroyed qpair still may
be presented in the queue and be processed later. That leads
to undefined behaviour.
Fixes#1086
Change-Id: Ieae186b2d2dce4ec88ab886b26165f6ef98e8d05
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477957
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This function is already declared in the public header which this
function includes.
Change-Id: Iff3f85dc166b7bd4d949b9b099a6bf05dec7dec8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477868
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Request can be freed by transport_req_complete. In such case req
or req->cmd dereference might result in heap-use-after-free.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2280d3978f1f183a250828aab7d2ca49ef1800ec
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following scenario might occur when nvmf_tgt is stopped:
1. nvmf_tgt receives SIGINT, changes state to NVMF_TGT_FINI_STOP_SUBSYSTEMS
2. In this state nvmf_tgt stops all subsystems and disconnects associated qpairs
3. In the case of RDMA qpair, its state will be changed to IBV_QPS_ERR.
Once qpair changes the state to IBV_QPS_ERR, RDMA device generates
LAST_WQE_REACHED event when there are no more WQE that can be sonsumed
from the SRQ by this qpair.
4. When all subsystems are stopped, some of qpair may still be alive since they
haven't received LAST_WQE_REACHED event yet.
5. nvmf_tgt stops all poll groups and forcefully destroyes any qpairs linked to them.
6. At this moment LAST_WQE_REACHED event might be generated and received in another thread.
Handler of this event sends a message with a pointer to qpair. The qpair itself may already
be destroyed.
7. Thread that owned qpair receives a message (LAST_WQE_REACHED) with a pointer to alredy destroyed qpair and
destroyes it for the second time when all pointer are invalid.
ibv events related to qpair should be handled by the thread that
owns this qpair. This commit adds a new structure that describes
ibv event, helper functions for sending the event and a list
of events per rdma qpair; add syncronization for LAST_WQE_REACHED event
Fixes#1075
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I22bff89741708df2518760934ecb4e33fad49473
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMF_REQ_MAX_BUFFERS is defined in nvmf_internal.h and not used in rdma
source code.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I50f24c8fc4ea773378418f7803361d8592f961ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
It is valuable to have more detail status instead
SPDK_NVME_SC_INTERNAL_DEVICE_ERROR.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ifd003b490a7ae9af017645c97636ceaf2f93d4b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476634
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some new features defined in NVMe 1.4 specification also need
the data buffer, but for now we only listed 3 features, we will check
the data length field anyway, so this piece of code can be removed.
Change-Id: I22204cf53077073434bb0ed73693bcf72883f084
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reservation Acquire Action(rqcqa) is used for reservation acquire command, since
we have replaced cdw10 with specific commands fields, so split the two cases to
make the code looks more clear.
Change-Id: Ib2a2458dd0fe8345f1c33341dab1c4fe3b82829f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476838
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Destroy in poll_group_add results in heap-use-after-free because
upper layer calls qpair_fini in case poll_group_add returns
error.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3e921a21b7ab5f7c15c80bc5919cb97cbda0b5d2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475858
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This issue was found by code inspection.
It only occurs when pdk_nvmf_transport_poll_group_create()
itself calls spdk_nvmf_transport_poll_group_destroy().
Other transports at this time do not show this issue.
spdk_nvmf_rdma_poll_group_destroy() depends on
rgroup being assigned a transport, which is only being
done on generic nvmf layer using
spdk_nvmf_transport_poll_group_create()
after successful spdk_nvmf_rdma_poll_group_create().
When failure occurs during create, such assignment was not
performed so any references to rtransport will segfault.
Reported-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id54482d562bd6d7c71371306cf1de93bc05f4e8a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Also need to update the spdk_nvmf_tcp_poll_group_poll.
Since if the tqpair recv state in wait_for_req,
we may already received the data, and there could be
not epoll event.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9c5a202e47e57aaba63da143f954a20c135a98ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473626
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The NVMe-oF target requires 128-bit identifiers for reservations,
so the extended report format must be used. If the user issues
a reservation report command without the extended format bit set,
the specification says to fail it with the HOSTID_INCONSISTENT_FORMAT
error code.
Change-Id: I2382af4f69167322d8e2c3f06cf8d9042830a70c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: But if we use asynchronous writev
for pdu sending, the call_back of writev may occur
after the new data coming. So it means that the
free tcp request may not be available.
So we use the strategy to check the request status
in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST.
So the strategy is checking the state_cntr of all the
reqs in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST
state.
1 If the state_cntr > 0, we should queue
the new request.
2 If the statec_cntr == 0, it means that
there is no available slot for the new tcp request
, i.e., the new nvme command comming from the initiator.
If we receive this, it means that the initiator sends more
requests，and we should reject it.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifbeb510e669082cb7b80faf2e7987075af31d176
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472912
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To avoid the allocation of ttransport in the sub functions,
and it makes the code much efficient.
Change-Id: Ie4c5a1755ddbecf10dc364ff811f74a7af5f9c3b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473003
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we use async writev (e.g., lib io_uring), we find that
the callback of writev is executed after recving the new
data from the initiator, and this is possible.
For example, if the NVMe-oF TCP target receives the ic_req from the
initiator, and sendout the ic_resp, the state of tqpair will change from
invalid to running until the callback is executed. And the data of ic_resp
is already sent to the initiator, and we receive the new command later. However,
we may still not get the call back function executed
(i.e, spdk_nvmf_tcp_send_icresp_complete). And it is possible
for using lib io_uring, I faced this issue when using lib uring.
And this patch can fix this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7f4332522866d475e106ac6d36a8ec715133f0dc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The loop is intended to accept multiple socks when
available, but once accept returns NULL, there's no
reason to keep trying.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I896908d276da35bc3fff172c1c17e22abd2a5343
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473234
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's important to be able to recover full context from just
the PDU in the future.
Change-Id: I3d1f3c326299b1237b42dbe33d340a282c3bc5bb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470531
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This is always the request pointer, so rename it for clarity.
Change-Id: Ifbda7db7787c65f0deb190a1e94f0676b2c0d99a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Use whatever size the socket layer thinks is best. In practice,
this is the same size as before.
Change-Id: I4820e16d8da6e566d1f8f078a75d345399f64ab5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
