The new abort functionality doesn't take custom admin cmd
handlers into account.
This commit allows setting a custom admin cmd handler
for abort that provides the ability to influence the
bdev lookup to which the abort is sent to.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I3a66c6f863f5ee4d89cb2194dffdc6855945fa8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3485
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This follows struct rte_pci_id which had class_id as well.
We'll need it to make some additional DPDK APIs public through
the env abstraction.
Change-Id: I794a6cd6b17e48daf53b48fa5abe3d3dcfeaa403
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3182
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
You don't get notified when someone starts using your hooked
device, so there's not much gain from knowing when someone
stops.
Remove that callback and also move DPDK device detach under
the same lock which sets the pending_removal flag. This eliminates
a data race window when hotremove notification could arrive
after device was detached, but before it was scheduled to be
removed.
vmd and ioat nest the spdk_pci_device struct and abigail complains
even though the parent structs only have forward declarations in
public headers. Adding those two structs to the suppression list
doesn't help though. Abidiff still complains about the pci device
struct being changed, probably because ioat.h and vmd.h both include
env.h. Abidiff suppresion list should eventually be split per-lib,
but for now ignore struct spdk_pci_device changes globally.
$ abidiff [...]/libspdk_ioat.so [...]
'struct spdk_pci_device at env.h:652:1' changed:
type size changed from 1024 to 960 (in bits)
1 data member deletion:
<SNIP>
Change-Id: I9b113572c661f0e0786b6d625e16dc07fe77e778
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2939
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also update accel_perf to support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ida7b863de02c64239ec4cfbdc3b0235d4e0521f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2954
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also as a minor drive-by, added verify capability for fill that
wasn't there before, useful in making sure the prep function
was working and really should have been there anyway.
idxd support for prep fill will follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib54311c1fb98abd2fb61df6603cf3c5300b71161
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2952
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Adds support for both the accel fw and the sw implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib8748f272a688a074ca475a86dea14179acc020d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add disable_sections_merge() procedure that will allow
to have multiple sections with a same name.
This behaviour is how FIO treats such sections
and so will be used in bdevperf config file.
Change-Id: If221daeb7753d91b5d2608d25ccbb16f2d43ccce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3433
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This macro works only in debug build, in release it always returns
false.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I949ac5f3e3ff811bd4590645300c536c5a6afab6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3358
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add three variables, poller, timeout_tsc, and req_to_abort to
struct spdk_nvmf_request to wait until the request to abort is
abortable without using any dynamically allocated context.
struct spdk_nvmf_request is already very large (968 bytes), and
the pahole tool checked these variables did not create any extra hole.
Poller pointer and timeout value are usable for other potential
cases, and so use generic names.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7202ade181365ab586d8c30383b3ea0fef82dcff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new macro spdk_nvme_cpl_is_abort_success(). This will be used
in NVMe driver and NVMe bdev module later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8348f54ed8c9fd0238661f7d7e61e9e6f36f33c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having functions without qpair on the interface allows for wider usage
e.g. by nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a51ad53f00eb29e2ba2681ef4ff0cc2a197b65d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To abort requests whose cb_arg matches, add child abort request greedily.
Iterating all outstanding requests is unique for each transport but
adding child abort is common among transports, and adding child abort
is replaceable by other operations.
Hence add qpair_iterate_requests() function to the function pointer table
of transport, and pass the operation done in the iteration by a
parameter of it.
In each transport, the implementation of qpair_iterate_requests() uses
TAILQ_FOREACH_SAFE() for potential future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic70d1bf2613fce2566eade26335ceed731f66a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2038
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Definitions for the new I/O Command Set aka. Namespace Types.
Definitions include CNS values, controller capability values, controller
configuration values, and command specific error codes.
Also, addition of the "old" controller capability and configuration
value for "No I/O Command Set or Admin Only".
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I1256d657d306299365d1aa40b943070b31fcd489
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2932
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Export iova-mode parameters in spdk which is useful in
VM environment.
Change-Id: I3f4756b2c3b6cf5d1964a50bbf63f9c596997696
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add to both accel framework and add sw engine implementation.
IDXD implementation and accel example app patches to follow.
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7df28518505f0d4bbb32cc8e69eb8a231fb29452
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This might be helpful if secondary processes cannot start due to
conflicts in address map.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I180dc09b4cad3b0064f009b0f553f5929de6566c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2776
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We don't want these internal functions to show up in the
object files with an spdk prefix.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic14cbe2963e176bddbff1a729b503f972a78419d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2871
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is technically a function that will remain
static in the library where SPDK_BDEV_MODULE_REGISTER
is invoked. It was missed in earlier checks because it
is created via a macro.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I32a59f88bb7c112183763f222d4e1c8c864c545a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2794
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For completeness, now all output is placed into build/ in the
appropriate location. In the future, 'make install' can be changed
to simply copy from there instead of rebuilding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I236b37868b5f4a2d5c5b910090aeaa9dff0501e2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2381
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
bdev_io is passed to the callback to the timeout I/O, but the context
of bdev_io is stored in cb_arg and spdk_bdev_abort() needs cb_arg.
Hence add an new helper function, spdk_bdev_io_get_cb_arg(), to get
cb_arg of bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5eb25ffdad2467c55a1b55f8cf0accef8799bb4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The I/O aborted by the abort command should be completed with SC = 07h, i.e.,
"Command Abort Requested". However, if the generic bdev layer or non-NVMe
bdev module aborted the I/O, the aborted I/O would complete with SC = 06h, i.e.,
"Internal Error". To fix this unexpected behavior, add an new I/O status
SPDK_BDEV_IO_STATUS_ABORTED and update spdk_bdev_io_get_nvme_status() to
set SC to 07h if the I/O status is SPDK_BDEV_IO_STATUS_ABORTED.
If the NVMe bdev module aborts the I/O, the I/O status is set to
SPDK_BDEV_IO_STATUS_NVME_ERROR and SC is set as expected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc99a97248a8d54a8c8d2fab74a90c7ce99c2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Having spdk_vhost_blk_get_dev required us to bump up the SO version
the vhost library when we updated bdev.h but spdk_vhost_blk_get_dev
has not been used publicly, and can be inlined very simply.
So remove spdk_vhost_blk_get_dev from include/spdk/vhost.h and inline
it to the place which had used it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98c233b81d7980d4e2c5bd3c0a65d747f183e1e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Useful for transport specific layer to inform that SGLs are not
supported or to adjust settings.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia849f5af206538408664fd20ea4e7dcb9da6f6f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_cuse_update_namespaces() API allows application
to repopulate namespaces on NVMe CUSE devices.
Change-Id: I5375b13bcc91b17cd26b4dc6f02d83dc33826542
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/658
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Thus, we can make sure that when read data is larger than
the pipe size, it will not read the data into the pipe.
Change-Id: I87f3b03fd9b81eb693e9eae0fea9eef7d1b9eaa8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_impl_get/set_opts functions allow to set different socket layer
configuration options. Options can be set independently for each
socket layer implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I617e58366a153fae2cf0de1b271cc4f4f19ec451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Along with the sw engine back end implementation for it. IDXD
back end will follow, the use in the accel perf tool as part
of verify.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia1013cd884ff71990f898320d6a22e96e16ad2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_mem_reserve() function reserves a memory region in SPDK's
memory maps. This pre-allocates all of the required data structures
to hold memory address translations for that region without actually
populating the region.
After a region is reserved, calls to spdk_mem_register() for
addresses in that range will not require any internal memory
allocations. This is useful when overlaying a custom memory allocator
on top of SPDK's hugepage memory, such as tcmalloc.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia4e8a770e8b5c956814aa90e9119013356dfab46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2511
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Verbs implementation: doesn't differ from the original:
- send_wr: saves WRs in the qpair internal structure
- flush_wr: calls ibv_post_send
Direct Verbs implementation:
- send_wr: calls ibv_wr_start for the first WR;
Calls opcode-specific function to add a WQE to SQ
Tracks queued WRs to return a correct pointer to 'bad_wr'
- flush_wr: calls ibv_wr_complete - it flushes to the NIC
all WRs added between ibv_wr_start and ibv_wr_complete
Change-Id: I65a26914db688af20589f3b69a994d214d860726
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
RDMA provider is used as an abstraction layer and allows
to add vendor specific verbs implementation. This patch adds
an interface to create and destroy qpairs and its implementation
using regular verbs API.
Future patches will add functions to queue/flush Work Requests,
enable usage of RDMA providers API in NVMEoF target/initiator and
add Mellanox Direct Verbs implementation. This abstraction layer
is flexible enough to add other vendor's implementations.
The choice of a specific RDMA provider will be made at
the configuration step, it doesn't add any runtime overhead.
Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev_auto_examine flage will impact how bdev layer examine a
disk. If bdev_auto_examine is true, the bdev layer will examine all
bdevs as usual. If bdev_auto_examine is false, the bdev layer will
only examine a bdev if it is in a whitelist.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If5b26283905f97f8a95ae9065226fa3dae6c27a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2114
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Some users of SPDK API, such as OCF,
may want to generate logs with arguments themselves.
In that case they would need to first create a buffer
and then pass that buffer as a single argument to spdk_log().
This change adds spdk_vlog() which accepts va_list as argument list,
so it is easier to use spdk_log().
Change-Id: Ie2a3ac481035a250fcd68d0f9b8292008ebb6fe0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1946
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allowing for custom crc32 polynomials isn't really within the scope
of SPDK. SPDK libraries have shifted over to using more optimized
versions of these functions wherever possible (e.g. ISA-L).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie4837010874e957481dd00896389b38c842445e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2424
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This file isn't exclusive to the nvme lib. As such, it shouldn't
use the internal SPDK_LOG_NVME flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib6d239ad2e45e58fb97a5ea70b01ce72afa938c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2246
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_log() accept filename = NULL.
If filename is NULL then source information as well
as log level is not displayed.
This change allows to replace all usages of
printf() and fprintf(stderr,) by
SPDK_PRINTF() and SPDK_ERRLOG() which use spdk_log().
Using spdk_log() instead of printf() is always prefered
since SPDK can be used inside of another application
where SPDK logs could be redirected.
SPDK uses printf()
places where location info is not needed
we cannot replace it by SPDK_NOTICELOG().
This change is in the scope earlier planned task:
https://trello.com/c/lZzBjrw3/10-remove-use-of-printf-fprintf-and-perror-for-logging-in-library-code
Change-Id: I55c24da4a2092bd118fa2c121092d253cedb1cf8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch also implements the new API for the 3 existing engines.
There was also some minor clean in one file, moving a function to
eliminate multiple forward declarations (there would have been
another one with this new API).
The next patch will use this API in the accel perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ebc9cb3d1c588919235b5080cbeec29189efa21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2025
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Docs, RPC, unit tests, etc., will follow. Notes:
* The current implementation will only work with VFIO.
* The current implementation supports only the existing accel
framework API. The API will be expanded for DSA exclusive features
in a subsequent patch.
* SW is required to manage flow control, to not over-run the work queues.
This is provided in the accel plug-in module. The upper layers use public
API to manage this.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels will see the ring sizes increase. This is done from upper layers
via public API into the lib.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifaa39935107206a2d990cec992854675e5502057
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1722
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Separate these two operations into different functions. It is
possible that a CMB may not be visible from the CPU, but still
be present and have data transferred to it by some other DMA
engine. Generalize the API to handle that case.
Change-Id: Ifcd282af0db734fe4a6ef2283ae8e8933d017809
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Update vhost blk contruct rpc, make it enable to
support packed ring feature.
Change-Id: Ia1f75e72e8441e8d82fad89073e4875f89e5b9cd
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove unused io_device_delete_count field
Reorganize the fields so that ones used in the data path are
located in the beggining of the structure and occupy 2 cache lines
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I98e22dacb84153e6a10a6ff6d77c1c9dfb14e02b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_state made of RUNNING, EXITING, and EXITED, and
the current state to struct spdk_thread.
The state EXITING is not actually used in this patch yet.
Replace the flag exit simply by the state EXITED.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e5dc7184d50ae6d00e6ba00f5e2cf6045e5d48d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This API will allow us to simplify the polling mechanism for qpairs on a single
thread. It also will pave the way for doing transport specific aggregation of
qpair polling to increase performance.
The generic implementation is included. The transport specific calls
have yet to be implemented.
Change-Id: If07b4170b2be61e4690847c993ec3bde9560b0f0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also modify some api documentation to indicate how the
new API should be used.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdbfb09aceda28635fdd191c520b36c692c2c100
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
connect_io_qpair essentially allows us to split the qpair allocation process
in half which will make it possible for us to do more sophisticated things
with RDMA qpairs in poll groups. as a companion to this new API, a connect_only
option has been added to the io_qpair_opts struct which instructs alloc_io_qpair
to only allocate the qpair and not connect it.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9ba9502dd39436006a9ac71436dd1871d648ed1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have been intermittently hitting the assert where
we check sock->cb_fn != NULL in spdk_sock_group_impl_poll_count.
The only way we could be hitting this specific error is if we
wereremoving a socket from a sock group within after receiving
an event for it.
Specifically, we are seeing this error on the NVMe-oF TCP target
which relies on posix sockets using epoll.
The man page for epoll states the following:
If you use an event cache or store all the file descriptors
returned from epoll_wait(2), then make sure to provide
a way to mark its closure dynamically (i.e., caused by
a previous event's processing). Suppose you receive 100 events
from epoll_wait(2), and in event #47 a condition causes event
#13 to be closed. If you remove the structure and close(2)
the file descriptor for event #13, then your event cache might
still say there are events waiting for that file descriptor
causing confusion.
One solution for this is to call, during the processing
of event 47, epoll_ctl(EPOLL_CTL_DEL) to delete file
descriptor 13 and close(2), then mark its associated data
structure as removed and link it to a cleanup list. If
you find another event for file descriptor 13 in your batch
processing, you will discover the file descriptor had
been previously removed and there will be no confusion.
Since we do store all of the file descriptors returned from
epoll_wait, we need to implement the tracking mentioned above.
fixes issue #1294
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib592ce19e3f0b691e3a825d02ebb42d7338e3ceb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Dword alignment and granularity are required for the data blocks when
the controller reports this capability.
Change-Id: I6b6300515a528acb34a032050ceedf673a4b326c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1315
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch updates reactor to count thread run time correctly
on multiple SPDK threads per CPU core configuration by using
the refined spdk_thread_poll().
Add tsc_last to struct spdk_reactor to use the end time of the
last thread as the start time of the next thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21042867885d289ff0c23bf2a9ba6a8076a59673
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Update spdk_thread_poll() to count SPDK thread stats correctly on multiple
SPDK threads per reactor configuration.
spdk_thread_poll() gets start time and reads TSC at end as end time,
and then gets delta between them as run time. Run time is added to idle
time or busy time according to the result of polling.
Reactor overhead is included into the next thread which calls
spdk_thread_poll() now.
spdk_thread_poll() saves the end time to the current thread to use it
as the start time of the next thread.
Unit test framework for this patch and the next patch need to access
thread->tsc_last. In the next patch, reactor will use the end time of
the current thread to the start time of the next thread in reactor_run()
to realize the idea.
Hence add an new API spdk_thread_get_last_tsc(). The corresponding
variable is named as tsc_last and it is good and is aligned with
DPDK (DPDK has used tsc_start and tsc_end as variable name). But
last_tsc will be better as API name because the last TSC value is
easier to understand.
Then add necessary unit test and update the unit test framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e465e9283c032acb427576d0c90f9e1414f2271
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The APIs even don't have a chance to be called if the drive can't
support OPAL feature, so just remove the NULL check, and we will
store level 0 discovery descriptors after initialization, so
spdk_opal_cmd_scan() isn't necessary here, remove it as well.
Change-Id: I24f12f2c352996d9ebe76dc015cd0b7502798359
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The previous erase locking range API didn't take the real
erase action, it's kind of secure erase, so rename it with
another name and add the real erase support.
This method is used to cryptographically erase user data within
a specific LBA Range and to reset the access control Locking
of that LBA Range.
The TPer SHALL reset the ReadLockEnabled, WriteLockEnabled,
ReadLocked, and WriteLocked column values to False for the
Locking object on which the method is invoked.
Change-Id: I0c83df589382b0a2f189642d8119e389aa4bc559
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are maximum 8 locking ranges per TPer, so we don't need to use
calloc() for each range.
Change-Id: Ie9d96ba28736dd7a91cb615ece99ebcefa695fc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the macro SN32_LT and SN32_GT had been added to iSCSI
library. But such comparisons may be used in other libraries.
So add two inline helper functions spdk_sn32_lt() and spdk_sn32_gt()
to include/spdk/util.h.
Add unit test for these functions. These functions are located in
header file but math.c is the place if they are located in source file.
Hence add unit test as the one for math.c.
The next patch replaces the macro SN32_LT and SN32_GT by
spdk_sn32_lt() and spdk_sn32_gt() in iSCSI library, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3e4d80fea98ad4ae1516e27b9c9e8ec6f37e7a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1346
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no reason not to publish those. Especially if
they're needed in other public headers.
Change-Id: I7dfc6922fcc0dfc46822ad8a16a375f997b98e84
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9ffcc3f2e36b8044bbc394938fc7a1dca1dc6892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It was probably miss-interpretation of description from discovery log
page which refers to min admin max sq size.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I575bf7fd6beb904b3a38a07616b76a34f8365643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Align rdma and tcp to respect opts. Reduce default number of entries
for admin queue so it becomes memory optimization.
Linux driver by default creates admin queue with 32 depth, there is no
good reason to enlarge that queue by default within SPDK NVMe driver.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I97ceea8f350c52313021a63190fb0980f604c48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a preparation to the next patch which factors out the main
polling loop of _spdk_reactor_run() into a helper function reactor_run().
One of the subsequent patches will support CPU power saving by
adding sleep into reactor_run(). We should not insert sleep between
the main polling loop and getrusage() because now is got before
entering the main polling loop.
To put getrusage() into reactor_run(), we need to maintain last_rusage
in struct spdk_reactor and maintain g_rusage_period as a global
variable. This patch does these changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61bf50de6a170ac73c8fe17e85077b90171dd9c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The macro is defined by the spec, so place this value to where
it should belong.
Change-Id: I23f91662fd4ab279aa4285212fc8cbd2ed42245b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the spec defines the Method Status Error Code, but here the return
value is just from function uses the normal errno, such as ERANGE, so just
remove them.
Change-Id: I43be95f62a4e465090462743b91246b1d63e2acd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No actual logic change except re-define some data structures.
Change-Id: Id0a483071591beee675cbc3ef368ac1fb723cfe0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also uses ComPacket header to check the received data, no actual
function changes.
Change-Id: I905fc6b8bb4656d48d43ff4ff8d1f705b9b595b9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be re-used in the muser transport of nvmf.
Change-Id: If00e6ea79ffdc0c3bda0402f39c5f9f4f411788b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
3rd party library can be integrated with spdk code. To simplify that
integration nvme status filed within that patch is exposed as union
with u16. Having that is easier to assign spdk status when rhs is u16
and easier to read when lhs is u16. However, both sides need to be
aligned with nvme spec.
To align with SPDK style it shall be rather status.bits / status.raw
but it requires a lot of changes in nvme/nvmf library.
Note: According to spec phase tag is not within status but Linux
driver does similar, when rsp needs to be set it just shift left 1.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I90940cbd2851b7d56dd928d801e60cd9dde05b7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support thread_get_io_channels RPC
in the next patch. The next patch will refer only name of struct
io_device, and so adding a helper function is better than making
struct io_device public.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc9dd78f71aa1e32847dc4c67eb79dae9cfbf9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/886
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New spdk_ftl_conf parameter l2p_path, l2p_path defines
location of existing pmem file or device to use as l2p table.
ftl_dev_l2p_alloc now has two flows:
1. If l2p_path is set perform pmem_map_file (PMDK) of l2p_size on it
2. Else malloc l2p table as usual
l2p_get/set will use atomic_load/store on both of those storage
locations as PMDK pmem_memcpy family of functions is not thread safe.
Signed-off-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Change-Id: I91806feb7aa0ef8057792bc120b09a39c63c8640
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_poller_register_named() to set arbitrary name
to the created poller. If NULL, the name is set to the pointer of
the poller function.
To set the name to the string of the poller function name conveniently,
add an new macro SPDK_POLLER_REGISTER() together in this patch.
All debug or error logs are changed to output poller name from pointer.
The added name will be used in the new RPC thread_get_pollers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3be558dd795252f797e3e81fa2db2e8b128cf004
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
thread_get_pollers RPC which will be added in the upcoming patches
will need to access internal of all pollers.
Following the last patch, expose struct spdk_poller internally among
SPDK libraries.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6844fc70165b4f127c49680ce592ac7b8c326cac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
thread_get_pollers RPC which will be added in the upcoming patches
will need to access all pollers each thread has.
To avoid adding JSON related code into lib/thread/thread.c, expose
struct spdk_thread internally among SPDK libraries and RPC code will
access it.
The next patch will expose struct spdk_poller internally among
SPDK library for the same purpose.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8da039db3021966ca1e28f6f086bb4c2a8eeb84a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replaced single global write buffer with the per-io_channel write
buffers. This means that the "rwb" module and all of its references
were removed and replaced with the recently added interfaces.
Change-Id: Idc899d3a4d63a8a2bede1ac26549ed06e9a2e784
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The IO channel pointers are now stored inside an array of the device
they belong to. Once write buffer entries are tied to IO channels,
it'll provide a method for dereferencing an entry from its address.
Change-Id: Iaf401525eb0f5af8dc6047a1dc8bae11b56761d7
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add transport_ack_timeout parameter to nvme controller opts.
This parameter allows to configure RDMA ACK timeout according
to the formula 4.096 * 2^(transport_ack_timeout) usec.
The parameter should be in range 0..31 where 0 means use
driver-specific default value.
Change-Id: I0c8a5a636aa9d816bda5c1ba58f56a00a585b060
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an new API spdk_thread_set_cpumask() and enum SPDK_THREAD_OP_RESCHED.
spdk_thread_set_cpumask() can be called only from the current thread
and requires SPDK thread operation supports reschedule operation.
spdk_thread_set_cpumask() updates the cpumask of the current thread to
the specified value, and then invokes framework's reschedule operation
to the thread.
If spdk_thread_set_cpumask() calls multiple times in a single
spdk_thread_poll() context, the last value will be used in the
reschedule operation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7808626b10269543c1e2cd86793a504daa4b6389
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_op and two function typedefs spdk_thread_op_fn
and spdk_thread_op_supported_fn.
The first operation type of enum spdk_thread_op is SPDK_THREAD_OP_NEW,
and it is used as an alternative to spdk_new_thread_fn.
Add global variables, g_thread_op_fn and g_thread_op_supported_fn, and
then add spdk_thread_lib_init_ext() to initialize these.
spdk_thread_lib_init() requires both of thread_op_fn and
thread_op_supported_fn are specified or not specified.
spdk_thread_create() calls g_thread_op_fn() with SPDK_THREAD_OP_NEW
if g_new_thread_fn is NULL, g_thread_op_supported_fn is not NULL,
and g_thread_op_supported_fn(SPDK_THREAD_OP_NEW) returns true.
Update unit test to test these addition.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56db903f62437f6ff3198248ffc5dede396c22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_thread_get_by_id(). This will be used in the
subsequent patches to set the cpumask of the running thread to the
specified value.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib5d02b9d7b499477c43e6527cf8f603d8323e063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an unique ID for each created SPDK thread. Use a single 64 bits
variable, g_thread_id, and guard its update by the global mutex
g_devlist_mutex. For our safety, further thread creation is not
allowed if g_thread_id rolls over, and request user to restart SPDK
application.
Besides, as a minor update, move the debug log down and add ID to it
in spdk_thread_create(), and ID is added to thread_get_stats RPC and
framework_get_reactors RPC.
The thread ID will be used to set the cpumask of the running thread
to the specified value in the subsequent patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09f11d4c7175c3b89acba6a42e76063acd0d1a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By these patch series, spdk_thread_poll() runs normally even after
the thread is marked at exited. However, spdk_thread_send_msg(),
spdk_get_io_channel(), and spdk_get_io_channel() will fail after
the thread is marked at exited.
Update the comment for spdk_thread_exit() in the header file
accordingly. To avoid rebasing the patch series, append this to
the end of the patch series.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic03d3c5461feb3ad878749a4c71a582c8ef3f26c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/847
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are synchronous security send/receive APIs defined in nvme.h,
however, we still need the asynchronous APIs so that we can make the
OPAL library can be used in asynchronous way. As the asynchronous APIs
are already defined in nvme_ctrlr_cmd.c, so just export them to public
APIs.
Change-Id: I5646f342a4bf70faad37daa956476f05a1327bcc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a way for the transport to query the value of the controller
registers.
Change-Id: Id365ff088989f6f8e74e26ff6f3d435f35bee2f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
it is defined in memory.h
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a65f82e565dc56c5d4e3e0211571e1d1dddf393
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added scatter/gather version of the zone append command.
Change-Id: I6f999be335fe3e896456ca7e17d0f02743f06ca1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Given enum was not aligned with spec. This status can be reported when
size equals 0.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51f6b051c13880c1fd4e6bb0a02f134b28b5a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Startup RPC only to avoid issues trying to switch while in use.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f1801905de0927f3610c4065182dd8fa88cdfdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
* Moved code around in accel framework as the sw implementation
is included in the same file (it's always present) so that its
easier to differentiate framework functions from sw accel
* Renamed some functions for the same reason
* Added/edit comments to clarify things
All in prep for extending the API to more functions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I465ee743d999999df4c06e3f68feddcd73c6e6a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be useful in the upcoming spdk_nvme_poll_group api.
Change-Id: Id83340a2ce9887817312f5aac38db4de8c588974
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/577
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EBUSY if the thread has any
registered poller. We enforce all pollers including paused poller
are unresitered before the thread is marked as exited.
By this change, a bug was found in reactor_perf test tool. Fix it
by adding spdk_poller_unregister() and add the g_ prefix to avoid
future potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7f40357c9a6f4101b3998ea0da3cc46cc435031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add spdk_thread_is_exited() to check if the thread is marked as
exited. This API will be used by reactor to destroy the thread
which exited voluntarily.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2086984b7813e8a1f401852fde7ab263bcf8ef60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The custom command handlers are registered by outside software.
Move the implementation from lib/nvmf to the nvmf_tgt application
to match the intended usage.
Change-Id: Iedb7ae5356f195dfb5bb465975808c8749d16f32
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a public header that needs to be accessible to
code outside of the SPDK project. The spdk_internal/
directory does not end up getting packaged - it's just for
headers used by multiple libraries within SPDK.
Change-Id: I14e1ab4fda4b0ee779203d190a266240b10be6ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/413
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines the official interface that NVMe-oF target
transports may use. For now, all code is just copied
from elsewhere. Eventually we'll want to add doxygen
comments.
Change-Id: I0cd9368607544be18c7c49188d071e38ceb59b8f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some functions performed incorrect header/data digest
support check, align it with NVMEoF spec. Use a table
to check if PDU supports digest depending on its type.
Change-Id: I6170dd19ace017f37fda0a923f604732799460b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483375
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the recent changes which added usage of writev_async to
both TCP target and initiator, nvme_tcp_pdu::writev_offset
becomes useless since it is not updated in data path. This
field is only used in UT. Remove this field from nvme_tcp_pdu
structure, now nvme_tcp_build_iovs builds iov which fully
describes the PDU. Update UT accordingly.
Field padding_valid_bytes is not used at all, delete it too
Change-Id: I2d6040ae64d6847cb455f59f65ec5677de8e5192
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483374
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_put_io_channel() was designed to be called on the same thread
that called spdk_get_io_channel(). spdk_put_io_channel() sends a
message to its own thread, to allow the context to unwind before
releasing the resources. This had the side effect to allow an
incorrect thread to call spdk_put_io_channel(). This patch will fix
that.
Bdevperf tool had a design flaw that needed the side effect, but
it was fixed recently. We do not know if we have any other case.
Hence add assert to spdk_put_io_channel() to find other case.
We found that unit test for blobstore had called
spdk_put_io_channel() and fix it together in this patch.
Besides, correct the comment for spdk_put_io_channel() in
include/spdk/thread.h not to create any other case in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ec7bf074818abef43b23ca40bc9385adac70a75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479390
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to support read operations on separate thread.
Change-Id: I10b595b8eeaf5fd0182f05913fdd5baa4b84961f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
In order to handle media management events spdk_bdev_open_ext()
should be used instead spdk_bdev_open(). Move this call to ftl lib
to keep media management events internal to the library.
Change-Id: If4c9382cc89fc537667923f00d3dae5df0ace248
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added spdk_vmd_fini(), which detaches all PCI devices acquired by the
VMD subsystem.
Fixes#1148
Change-Id: I43218ef5f9a764546b655c28688897fb91b779cb
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482852
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When attempting to decode a base64 string, while there is a way to
calculate the maximum possible decode length, there isn't a way to
calculate the exact decode length without duplicating some base64
specific logic located in spdk_base64_decode. With this change, the
spdk_base64_decode function can now optionally calculate the exact
decode length without actually performing the decode by passing NULL
in as the dst argument.
Change-Id: Ice83db979f86a6fe9f39d236d3083102ca37ec68
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_app_start() can have a completely different behavior
if called with opts->delay_subsystem_init (set via
--wait-for-rpc) - document it.
Change-Id: Id28e1e0cad4681fc9ee29359a7f0e02eae58b434
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If NULL is passed as opts to spdk_nvme_ctrlr_alloc_io_qpair,
the defaults will be obtained from spdk_nvme_ctrlr_get_default_io_qpair_opts
instead of spdk_nvme_ctrlr_alloc_io_qpair.
Fixes issue #1160
Signed-off-by: Charles Machalow <csm10495@gmail.com>
Change-Id: I88d4399bc0872e73bc1e04b3f09834afd7d56c53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483306
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an additional option that can be passed when creating
a blob.
When opts->enable_extent_pages is set to false (current default),
only EXTENT_RLE should be persisted on sync.
During blob load, when EXTENT_RLE is present in md,
blob->extent_rle_found is set to true.
When opts->enable_extent_pages is set to true,
only EXTENT_TABLE and EXTENT_PAGES should be persisted on sync.
During blob load, when EXTENT_TABLE is present in md,
blob->extent_table_found is set to true.
It is possible to find neither EXTENT_* descriptor when loading a blob.
This means that blob length is 0 and EXTENT_RLE was supposed to be used.
Yet none were persisted due to lack of clusters.
In such case blob->use_extent_table is set to true after finishing
blob load.
When parsing metadata ends, if extent_table_found is set - then
support for extent_table is enabled. All other cases disable it.
At this time path for Extent Pages is not implemented, so it should
not be used.
Later in the series, it will become the default path for serialization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2146da6130a0645e686ab02a3b5d2d86a7d35a1f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479853
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If available, automatically use MSG_ZEROCOPY when sending on sockets.
Storage workloads contain sufficient data transfer sizes that this is
always a performance improvement, regardless of workload.
Change-Id: I14429d78c22ad3bc036aec13c9fce6453e899c92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
The resources allocated to a queue pair do not need to be directly
correlated to the queue size requested by the initiator in NVMe-oF, as
long as enough resources are present. The RDMA transport, for instance,
does complex pooling of the resources behind the scenes when using a
shared receive queue.
Simplify the resource allocation for a TCP qpair to just always allocate
the max allowed queue size right away. This is a configurable parameter,
so system administrators can adjust for their needs. The initiator may
then request a queue size less than or equal to that, which will only be
enforced by queue depth counting and not impact the actual number of
resources allocated on the target.
This change relies on the MaxC2HSize being equal to the Maximum Data
Transfer Size (MDTS) reported. That is the default configuration, but
MDTS is configurable. Changing the MDTS with this patch to a value
larger than 128k will cause the target to break. This is addressed in
the next patch in this series.
Change-Id: Ibd4723785c6a4d8d444f9b7bbfa89f98de2320f5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479733
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This function is required for NVMf implementation
for compare and write fused command.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If41611f5c0b8e4ed8eec66f09858c724f1800d59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477914
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add call for spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
function in spdk_nvmf_ctrlr_process_io_cmd function
when fused command is discovered.
This patch also removes redundant defines for fused flags.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I61971a56577ab32b52e1fde1e572f718a9a2d9aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476621
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move fused cmd related code from spdk_nvmf_ctrlr_process_io_cmd
to separate function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic662a968b054f05db7f6e1cf4fa9aa13f6fb7c40
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new function for getting NVMe specific return code
for fused commands. Also changed one of the return codes
in fused commands so that we could distinguish error
cases.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I86417ea4f5b8f3e6496162be3d6c6128076e35d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481666
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A new API was added `spdk_bdev_io_get_aux_buf` allowing the caller to request
an auxiliary buffer for its own private use. The API is used in the same manner that
`spdk_bdev_io_get_buf` is used and the length of the buffer is always the same as the
bdev_io primary buffer. 'spdk_bdev_io_put_aux_buf' is called to free the
auxiliary buffer.
The initial use case is crypto, in the next patch in series it is used. No UT were
added as the logic isn't that complicated and it is fully tested with each run
of crypto.
Fixed a comment typo also (not mine for once).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1939fcbc8e5db36fd909ef26771a725a551e8e6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478383
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initiator drivers (e.g nvme/tcp) don't use poll groups but rather directly
poll the qpair. In this case we want to allow the polling function (e.g
_qpair_process_completions()) to flush async writes pending on the socket.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Change-Id: Ibd8c73691213d58e287b7110d0f5a381a89a64d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Accept a clear method option on blob create by adding clear_method
to the opts structure passed in to _spdk_bs_create_blob(). Store
these 2 bits in md_ro_flags so that earlier versions without an
understanding of these bits can not alter metadata.
The new metadata values will be used later in the series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5440645ca20b426778d13b2e544b65dc2b3b83c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This optional OPC was added to the NVMe 1.4 spec.
Also add its corresponding bit in OACS.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61d7e7f0210b0617aaaf932e8fac060df79f7d6b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482016
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
This wasn't actually used. Every PDU only had a single reference.
Change-Id: I8adaa7edeca5fe175aa853c156df741170d76c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479902
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
"lbk" name is more OCSSD specific so in
generic FTL "block" name is more suitable.
Change-Id: I792780297b792bf5e02f13cc20346da56b032918
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472284
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Zone append command allow to write to the
zone with queue depth greater than one.
Append location is read during write
completion callback.
Change-Id: Ie08ce8d31d5d0fb521cdc2b95f3e29b92e02e63f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471627
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Prepare for setting priorities for different
kernel based sock implementations.
The g_net_impls list is maintained in decreasing order
according to the priority of each sock implementation.
For examaple, if there are 3 sock implementations, i.e.,
posix (priority = 0), vpp (priority = 1), sock_ut (priority =2),
then the list will be maintained as:
sock_ut -> vpp -> posix.
Then if users use spdk_sock_open/listen with impl_name as NULL,
then the order to try is: sock_ut, vpp, then posix
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I43899de5bac14751ab060a11eb814cd7a0a83cc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: With this patch,
(1)We can support using different sock implementations in
one application together.
(2)For one IP address managed by kernel, we can use different method
to listen/connect, e.g., posix, or uring. With this patch, we can
designate the specified sock implementation if impl_name is not NULL
and valid. Otherwise, spdk_sock_listen/connect will try to use the sock
implementations in the list by order if impl_name is NULL.
Without this patch, the app will always use the same type of sock implementation
if the order is fixed. For example, if we have posix and uring together,
the first one will always be uring.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic49563f5025085471d356798e522ff7ab748f586
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478140
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This new api function will enable us to work with custom transports.
This is needed to enable properly parsing and comparing custom transport
IDs that may all resolve to the same enum value.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I26aa3cb8f76f8273f564799d9b2af8041ea0d219
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function previously accepted a trtype enum, but needs to be able
to accept a string to support custom transports.
Change-Id: I931aed30ca3be65468552ffa1bb1ef3f91275fda
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For custom transports, we should use a range outside the spec value
to identify them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I82b29c349e143b8906f79ce2de818def116a3fe4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Compare and write fused operation num_blocks should
not exceed value of 'atomic compare and write unit'.
In case of NVMe native support we should read this
value from 'namespace atomic compare and write unit'
if set in namespace identify data, otherwise from
'atomic and write unit' field in controller identify
data. If bdev does not support this natively we should
set this value to 1.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib1ea02dbf9d1eed476d9dd0114ea96b1376e0c45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch replaces NVMe Open Channel API usage
inside FTL library with corresponding zone bdev
API calls. This include following calls:
- spdk_nvme_ctrlr_cmd_get_log_page -> spdk_bdev_get_zone_info
- spdk_nvme_ocssd_ns_cmd_vector_reset -> spdk_bdev_zone_management
- spdk_nvme_ns_cmd_read -> spdk_bdev_read_blocks
- spdk_nvme_ns_cmd_write_with_md -> spdk_bdev_write_blocks
Change-Id: I1b5a6863d9ce72f4af1cfbb0e449fc1a5b638144
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added new field in bdev_io structure for tracking
number of IO retries. It will be used in future patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8e002e93f54c9ce39c7af0dd3a1960e6aea93580
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will only support a vectored variant of
compare-and-write for now.
This does no locking for now. Ii will be added
in a separate patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bd075c912de60090e19cf8fced19c4879fcc900
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475941
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This commit exposes some internal functions and enums
in preparation for the custom admin cmd handler functionality.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Iec15c1f3d9cba5db267f6e43f3d929cf382ca8f4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can't allow overlapped locked ranges - otherwise
two different channels could be deadlocked.
So add a pending_locked_ranges to the bdev. When we
start a lock operation, check if the new range overlaps
one that's already locked. If so, put it on the pending
list. When an unlock operation completes, we will
check if any pending ranges can now be locked.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e3113216a195887b954533495ff200df14fadc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Keep a mutex protected list of the active locked ranges
in the bdev itself. This is only accessed when a new
channel is created, so that it can be populated with
the currently locked ranges.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id68311b46ad4983b6bc9b0e1a8664d121a7e9f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477871
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will enable vhost live recovery and packed ring feature in next
few days, however most of the code is in DPDK vhost library, so we
will not enable this feature for our internal vhost library, but
there are many users still use it, so we will not support the new
features with internal vhost library but will maintain it until
we can drop it in future, this is the first patch to do it, another
patch will be submitted until the packed ring patches being merged.
Change-Id: I50fa0314fd64fa5ee1f06a78e1495e2d0d50a0d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The patch adds new interface for issuing messages during interrupts,
such as signal handlers. Without this, it'd be possible to deadlock
the application, as two different messages could be trying to enqueue to
the same ring, in the same call stack.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I917aa41b7f3415af7c7a7d5fa91b964d727609b6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478290
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This new function allows specifying some of the extra
cdw10, cdw11 and cdw14 bits added in the more recent
versions of the NVMe specification.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08a7840ad066b08fe557a2e7b974df491646978f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479737
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
spdk_internal/vhost_user.h head file defines common vhost user
protocol, and it can be used both in the vhost target and virtio
initiator, so remove the definition from virtio.h.
Change-Id: I1fac1cb5a16f803cd0d49962c07d2179f881c76a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is no need for spdk_ftl_module_(init|fini)
after ANM functionality was removed from FTL lib.
Change-Id: Id8d05aed8620217869c56fca35b490bc9c716541
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Moving to zoned bdev API will not allow to setup
physical range of underlying device so we need to
remove such capabilities from ftl device.
Change-Id: Ia807a11e992a221fce906d4ab122a6c3b1391280
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This function returns information if compare
operation is supported by device.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I321e9bf6d146ac8d14ea4549cb4380735b30be6f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_reactor_enable_framework_monitor_context_switch and
spdk_reactor_framework_monitor_context_switch_enabled had been
a little long and not easy to get the meaning.
spdk_framework_enable_context_switch_monitor and
spdk_framework_context_switch_monitor_enabled will be a little
more concise, and hence change the names accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f1d50e8b62846cbd0f91b94f94cbaf16fefa39b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove the description "return -1 if thread has exited" and add
the description "If the thread has exited, return immediately" instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If4b4b565dc7aa1261fa7c3fdfb73cfc814e38d5d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I18c260bb10bdf1c7aa5e00aa81a171f2ff50c7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6dc29f591f7112512be8a67b180b056150f467b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Purpose: The liburing library has recently changed the liburing.h,
io_uring_enter is removed in liburing.h, so proposed this patch
to fix this issue.
And after applying this patch, it could work for both old and new
liburing library.
Change-Id: Ifdfe74038f626d36ae8cf1fb01efc297814f094a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is starting point for moving current FTL
implementation which is working on top of
Open Channel NVMe driver to work on top of
abstracted zoned bdev.
This patch is changing name of ftl_chunk structure
to ftl_zone and start using zone states from zdev
interface.
Change-Id: I5429f489cc08a1ac27f09aba3dca4b40ea95eeb3
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Documentation mentions that the message may be processed asynchronously.
However, it's always handled that way - updated description to match the
behavior.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia284f18fa7ebbc0d4c1b9352572ffdc0260a4e84
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
An NQN can only be a maximum of 223 bytes, but the
field containing the NQN in all of the NVMe data
structures is 256. Specify that #define so it can
be used in data structures that need it.
Upcoming muser transport will also use this to
facilitate nqn handling.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ff81d13ae9d1542ee2591314653b23ab14664f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478496
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update the virtio_config.h to kernel version 5.0.
It supports more virtio flags which may be used in future
for example packed ring. Also it changed the
VIRTIO_TRANSPORT_F_END value 34 to 38.
Add the virtio_ring.h which will be used in packed ring
support.
Change-Id: If3fba1db400865eb8e09f6d2aa992b3893b65719
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added spdk_poller_(pause|resume) that allow a poller to be paused and
then resumed at a later point. These functions come in handy in cases
when a poller is known to be idle until a certain event occurs.
Change-Id: I7f21c80eb9ac4e8e1cf24d66f99da5687aafe358
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477920
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Media management event was introduced. It's sent out to notify that
some portion of the data needs to be rewritten (e.g. due to data
refresh, wear leveling, high error rate, etc.). This type of
notification is only utilized by devices exposing raw access to the
physical medium (e.g. Open Channel SSDs).
Change-Id: Ia30faa5866d71fd597009b441f69c609de974161
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For now we don't provide #ifdef to users, SPDK_CACHE_LINE_SIZE is defined with 64 bytes.
Change-Id: I8ddb01a382008a3e333967650200c5aa8b93e09e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This eliminates the flushing logic, simplifying the tcp
transport.
This also happens to greatly improve performance, especially
on random read tests. The batching done in spdk_sock_writev_async seems
to be more effectively than the previous batching logic in the tcp
transport.
Change-Id: Id980ac6073e380dc75f95df3f69cb224f50fb01b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470532
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an additional queue for requests that have been sent on the network
but aren't complete yet. As of this patch, the code
is still calling writev with no flags in the POSIX layer, so it completes
synchronously. That means requests pass through this new pending list
only very briefly inside of one function.
Change-Id: Iaab6efc118a6d5fe9589199515eb3a7293db4b8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_sock_writev_async for performing asynchronous writes to
sockets. The user of this call is responsible for allocating their own
spdk_sock_request structures to pass to this call.
spdk_sock_writev_async will not return EAGAIN and will instead leave the
requests queued until they are fully sent or aborted due to socket
error.
Change-Id: Idf3239e65d26a3024e578122c23e4fb8f95e241b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an API so that the user can enable/disable the bdev IO
timeout. Also, add the bdev io timeout handling callback.
So it means to let the upper user determine how to handle
the IO timeout scenario reset the device or abort the IO.
Change-Id: I9c7138ca46c74c045b687adab59a18d6bccc4996
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469228
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a useful utility function.
The end goal of this patch series is to create a python utility that can
be called upon to dump information about DPDK allocated memory in a
human readable way.
Change-Id: I18978732c9decbb39dce5b5151f5eff6b59f6591
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477510
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
We defined vhost user protocol in vhost_user.h file, so just
remove it to where it should belong to.
Change-Id: I3e9c6eece1db2a8eb739254608816ef9a4dd9993
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, invalid io_flags would results in -ENOMEM being
returned to the user which was incorrect.
Change-Id: I53dd0fa8684cb36f3d124baa92244e2ed30e2527
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476938
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
We will use this in a future patch to determine whether it's safe
to use DPDK allocated memory when allocating new 1gb page entries.
We could use it in this patch to decide whether or not to register
the memory hotplug handler, but there's really no harm registering
it even when it's not needed.
Ideally DPDK would provide some kind of API to query how DPDK was
configured. In the normal case we know whether legacy-mem was
specified, but if users initialize DPDK themselves and then call
spdk_env_dpdk_post_init(), we won't know if legacy-mem was specified.
So in that case, we will just assume that it wasn't specified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied0e5ff777c8ee651043f46a37ce62e44bfcc5fe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_nvme_async_event_config structure was very old name definition,
since it already has the new name, so remove the old name support finally.
Change-Id: Ib4f592298bd6f1de2f2fb78814767ed2b2335dea
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add a link to the bdev channel for linking all the bdev
IOs that were submitted to this channel so that we can
monitor each IO's consuming-time.
Change-Id: I1e425b2059f20fd7b158eb3d6b023ce8629e7a30
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will add the cdw11 specific commands definition in the next patch,
all the features definition will be reused, so just move the code
to the right place, no code was added with this patch.
Change-Id: I6186523cf1875ab0576f19957ae4c31733e4a8a6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe command dword 10 and dword 11 have multiple definitions for
different commands, add a union data structure here then we can
replace the hardcoded cdw10/cdw11 with command specific structure
in SPDK NVMe driver. For now add dword 10 for the first step.
Change-Id: Ie2c58b3039cfa5843d44224d31a38850ff577ed0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK by default guesses that it should be using iova-mode=va
so that it can support running as an unprivileged user. However,
some systems (especially virtual machines) don't have an IOMMU capable
of handling the full virtual address space and DPDK doesn't
currently catch that. Add a check in SPDK and force iova-mode=pa
here.
Change-Id: Ib3a5691a584190feaab4b9064b5a500e361328f2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the recent refactoring, SCSI task is configured when getting
DIF context from SCSI layer. Passing not CDB and offset separately
but SCSI task to SCSI layer is more concise and do in this patch.
In iscsi_send_datain(), we have to update task->scsi.offset for the
case that data is split into a sequence, but the update is no harm
because task has completed what it must to do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I153352dfa7aa7325db4452f03d863df11b3e0cfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Like memcpy, but works on two iovecs.
Change-Id: Ia1cf462a95690286f0c19325fc10937b9ba6baf3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When dealing with sockets most code in SPDK buffers
data into large chunks to minimize the number of
syscalls made. The pipe utility is designed to make
that easy.
Change-Id: Ie29966712bbfb43fb49457e042903cf45864e6c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move FLOOR_2MB() and CEIL_2MB() definitions to spdk_internal/memory.h
because that is where common memory functions are located.
Change-Id: I0d366686f86520e5564be07254d98a579faa3650
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also need to update the spdk_nvmf_tcp_poll_group_poll.
Since if the tqpair recv state in wait_for_req,
we may already received the data, and there could be
not epoll event.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9c5a202e47e57aaba63da143f954a20c135a98ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473626
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we use async writev (e.g., lib io_uring), we find that
the callback of writev is executed after recving the new
data from the initiator, and this is possible.
For example, if the NVMe-oF TCP target receives the ic_req from the
initiator, and sendout the ic_resp, the state of tqpair will change from
invalid to running until the callback is executed. And the data of ic_resp
is already sent to the initiator, and we receive the new command later. However,
we may still not get the call back function executed
(i.e, spdk_nvmf_tcp_send_icresp_complete). And it is possible
for using lib io_uring, I faced this issue when using lib uring.
And this patch can fix this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7f4332522866d475e106ac6d36a8ec715133f0dc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Since g_fs_cache_size only takes effect when creating
g_cache_pool, so spdk_fs_set_cache_size is only
permitted when cache pool is already freed or hasn't
been initialized.
Add a return value to indicate the result
of spdk_fs_set_cache_size.
Change-Id: I3828b136976d6f03f0751b2f20f68cd47c36ec04
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471869
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have a mix of -1 and -EINVAL which
is confusing, especially since these types of failures
also result in the caller's callback routine getting
invoked.
While here, document this new -EFAULT return code for
all of the functions that could return it.
Fixes issue #797.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8dfbba0ec0b83db0f2ec055b15830981af1965df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473054
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
1) consistently put each possible -errno value on separate
line
2) fix -ENOMEM misspelling
3) add missing text about submitting from one thread only
to spdk_nvme_ns_cmd_read_with_md
4) move text about submitting from one thread only for
spdk_nvme_ns_cmd_readv_with_md
5) remove explanation of DSM from
spdk_nvme_ns_cmd_dataset_management - we do not generally
explain the meaning of commands in this header file
It's possible there are some other inconsistencies still, but
I cleaned up all of the ones that I noticed. I was mostly
concerned about item #1 to prepare for a new errno that will
be added in an upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I993c01a2f9f1f8294c1ebf349cc877a663aa43b1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473053
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This at least allows the caller to know there was a
problem, and that the messages wasn't actually sent.
SPDK by default creates huge rings so this problem
should never occur, but out-of-tree use cases may
send messages much more often and require at least
a notification when it fails.
While here, change the thread check to an assert.
There's no need to work around someone calling
this function with a null thread parameter.
Fixes issue #811.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6d432d616be45c7a4232aff1548cef198702bc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This returns true if all registered methods and aliases
are correct. False means that an error like one of the
following occurred:
- duplicate method with same name
- alias specified for non-existant method
- alias specified for another alias
Also plumb this so that incorrect RPCs cause an SPDK
application to exit.
Note: there are cases where this would have been helpful
during the recent RPC renaming.
Fixes issue #940.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I235a433c9b8c01e82f16288a8d295e96c54e4eb1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds support for hotplug / hotremove detection for devices
behind the VMD. The detection acts similarly to the one implemented for
regular PCIe devices, that is user has to periodically call probe
function. Additionally, for applications not using SPDK's event
framework, spdk_vmd_hotplug_monitor has to be called periodically as
well.
Change-Id: I9f6839560efcf16c839b01976639d835f119cb47
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's important to be able to recover full context from just
the PDU in the future.
Change-Id: I3d1f3c326299b1237b42dbe33d340a282c3bc5bb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470531
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
