Add an new RPC, nvmf_subsystem_listener_set_ana_state.
Find the specified subsystem listener, and then set the ANA state
of the listener by calling nvmf_subsystem_listener_set_ana_state().
By adding a string and an enum to the existing context structure,
nvmf_rpc_listener_ctx, and adding an operation type to the existng
enum, nvmf_rpc_listen_op, reuse the existing code and data as much
as possible.
Besides, insert line break into a few long lines and fix wrong
error log.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6fb2dfbb1f9c5f56848eba21d2a733fbed802614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to enable placement_id getting
in sock layer and also add the rpc support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I70de57b0ed392a0aefce9d3ff1f61ef924015a87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4146
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an new RPC, nvmf_subsystem_get_listeners.
ANA state is per listener and per subsystem, and is stored in
subsystem listener. We can return ANA state by the existing
nvmf_get_subsystems RPC but it's confusing that listen addresses
have ANA states.
To change ANA state, we will provide a RPC to change ANA state of
only one selected subsystem listener.
To query ANA state, it will be convenient to get ANA states of all
listeners of one selected subsystem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic3baad6eac65d7af6e0cab2c4059e1458d41e6e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC, nvmf_subsystem_get_qpairs to retrieve the list of
qpairs of an NVMe-oF subsystem.
This RPC will be usable to verify if NVMe ANA works.
Pause and resume the subsystem to access the qpairs safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d90a01b1117dee00d85b2e21b4f4d02d80db531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4050
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using --dif-type option --md-size should be
required as well.
Update & improve bdev_null_create rpc.py help
messages as well.
Change-Id: I6588a97aef6c8792bab7a41ece17c0461bb36844
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3949
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an new RPC, nvmf_subsystem_get_controllers to retrieve the list
of NVMe-oF controllers of an NVMe-oF subsystem.
One of the main use cases will be to get identification information
of NVMe-oF controllers to configure their ANA states dynamically.
Pause and resume the subsystem to access the controllers safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME explicitly to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf8d1cf56850a705e343b86022d101b4c7204199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3848
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add MaxR2TPerConnection to iSCSI global options and make it configurable
by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida95e5c7dac301a22520656709e1aa4d611f31ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3777
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add MaxLargeDataInPerConnection to iSCSI global options and make
it configurable by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd16da2eac64241217bedeb89a7929bbdc67871
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3756
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add an new parameter max_large_datain_per_connection
to the iscsi_set_options RPC. It is longer than the column width of
the parameter table.
As a preparation, increase the column width of the parameter table
for the iscsi_set_options RPC first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0f27d608f9c186166cf7a132ae786ba70e398d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the login redirection feature, the current implementation works
only if a portal is redirected from an initial portal to a redirect
portal. However, the login redirection feature should work even if a
portal is redirected from one redirect portal to another redirect
portal.
A public portal group knows only a redirect portal and does not know
the portal group of the redirect portal.
Moreover, it is very likely that an initial portal and a redirect portal
exist in different SPDK iSCSI target applications.
To cover all these concerns, add an new iscsi_target_node_request_logout
RPC to request connections whose portal group tag match for the target
node.
To cover potential use cases, make the second parameter portal group
tag optional.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I612672490722fb22fd4eba055998b7408ab84ca5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As written in doc/iscsi.md, typically the login redirection feature
will be used in scale out iSCSI target system, which runs multiple
SPDK iSCSI target applications.
In scale out iSCSI target system, the initial portal, the current
redirect portal, and the next redirect portal are likely to be in
different SPDK iSCSI target applications.
In this case, asynchronous logout request should be sent independently
from the iSCSI target application which has the current redirect portal.
However, we had added asynchronous logout request into the iSCSI target
application which has the next redirect portal. This idea works only
for the case that login is redirected from the initial portal to a
redirect portal.
We remove asynchronous logout request from iscsi_target_node_redirect()
in this patch, and update the corresponding help documents.
The next patch will add an new RPC to send asynchronous logout
request to all connections to the specified portal group and the
specified target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib0ac72e8cdad7e8c64e446b7495e572fac4b5bae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3779
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter is now a string, not an integer.
Fixes issue #1518.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c187af69d7cdf1f60573a07bc1bacb58b5b78b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3581
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function bdev_lvol_create and bdev_lvol_resize actually passes in the size parameter
as bytes instead of magebytes.
Signed-off-by: Haichao Li <haichao.li@arm.com>
Change-Id: Ic47e799fb461c51816e696f2b03aa41ac517d421
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1906
Community-CI: Mellanox Build Bot
Reviewed-by: Yibo Cai <yibo.cai@arm.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The IOAT docs are pretty limited so what's here just mirrors those.
More documentation on the library as well as the module will be
provided as an ongoing activity.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28b13733f034fe117a4ea21983ce0418a427dd51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1925
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I066567f0f14d70e6744821e8e805934a3d790882
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9ffcc3f2e36b8044bbc394938fc7a1dca1dc6892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_get_io_channels to retrieve IO channels
of the threads. IO channel don't have its own name and so get the
name of the corresponding IO device instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8fbb328ffba09e1eace35994cdbf36b24832b82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_set_cpumask to control CPU affinity of
the thread dynamically from outside of SPDK application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b6b794405f612200a2c3cb27dc4fc1ad2e88bec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an unique ID for each created SPDK thread. Use a single 64 bits
variable, g_thread_id, and guard its update by the global mutex
g_devlist_mutex. For our safety, further thread creation is not
allowed if g_thread_id rolls over, and request user to restart SPDK
application.
Besides, as a minor update, move the debug log down and add ID to it
in spdk_thread_create(), and ID is added to thread_get_stats RPC and
framework_get_reactors RPC.
The thread ID will be used to set the cpumask of the running thread
to the specified value in the subsequent patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09f11d4c7175c3b89acba6a42e76063acd0d1a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD026 Trailing punctuation in header
This rule is triggered on any header that has a
punctuation character as the last character in the line
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ab4894092ef6b5f920d89b74e43c2e46e9581c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This commit disables the custom identify handler by default.
The user has to explictly enable this handler via the set_nvmf_config
RPC or conf file.
Change-Id: I767816ba7639ebe78683993408ce6db02c7620fe
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the case that there is no NVMe bdev configured and RPC is
running, it shall still allow the NVMe options set. Once there
is one NVMe bdev configured, it will not allow the NVMe options
set.
Change-Id: Ib6a527174137a5d4df7babe206d2527e600500c0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Add an new RPC `framework_get_reactors` to retrieve list of all
reactors. Running threads on each reactor are included
in the output. Update jsonrpc.md and CHANGELOG accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I985d087dd41afe3033b7678af141ec8e5a2a822e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Thread's core affinity had not been visible to users. This patch
adds thread's core affinity information to the existing
thread_get_stats RPC. We can create an new RPC to retrieve
thread's core affinity information but using thread_get_stats
RPC will be enough for now.
Besides, the name of SPDK thread 0 is not reactor_0 but app_thread
now. So fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I634da46c411d648837538ebf227074d307273c97
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
CPU mask parameter was deprecated in v19.10.
If we remove the related code from the portal parser, we will be
able to use the parser for the iSCSI initiator to know the target
portal in iSCSI fuzz testing. So let's remove the parser and its
test code here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72ad4364323abda0f0ed10519b56244cd0c7612e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is used to calculate more accurate interval between two
calls of bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib561b056bc8095aa23d04cb5f9ae6f558b157124
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This RPC method will mount blobfs on bdev to one host
path through FUSE. Then on the host path, user can
directly do some file operations which will be mapped
to blobfs.
Note:
* The FUSE mount of blobfs can be umounted directly by
SHELL umount or fusermount command.
Change-Id: I7c322d978b39bbc7255fced345a749ad5bfa7077
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In a couple of docs and a .py file, saw while reviewing name changes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6a8b579ca692cdf6df1024e42eee76de5bde1227
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Following test/blobfs/mkfs case, add it as one RPC
method to let build a new blobfs on given block
device.
Change-Id: I0ffbb1add95dfbc8655e0238ed6f3cd519dd945b
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Zoned bdev properties were added to the result of the get_bdevs RPC
call:
- zoned: indicates whether the device is zoned or a regular
block device
- zone_size: number of blocks in a single zone
- max_open_zones: maximum number of open zones
- optimal_open_zones: optimal number of open zones
The "zoned" field is a boolean and is always present, while the rest is
only available for zoned bdevs.
Change-Id: Ib82b39d4ab20543d0a754dbc4c0317885fb831d1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the in tree applications don't really support these RPCs, keep
them out of rpc.py. We can add them in after the applications have been
modified to support that functionality.
Change-Id: I7aae2c623b6da48374fe53f8b9471b08e5f0af7a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
