A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we directly assigned the pointer of pool_name
and rbd_name, and this is not safe. After the rpc test,
we found the string value is not correct, so use strdup.
Change-Id: Ibadc57d3cb5b9869b7db5a22c2459769e92edebd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Four read/write functions share the same code for checking
IO len and offset. Extract this code into separate function.
Change-Id: I40f0021e70a60c591b048ad3a70b22eaa07af3b4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Only call spdk_bdev_io_complete() where IO error is seen.
Change-Id: I829e4c589dbcb47017e810035837a4c61c3428f9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For large writes that require multiple SCSI tasks (one for immediate
data, then one or more for R2T-solicited data), we bump the refcount
for the task associated with the initial immediate data PDU, to
ensure it does not get freed until all of the child tasks are
completed. But in some cases this initial immediate data PDU could
complete after all of the R2T-soliciated data PDUs. The
completion code was not handling this case correctly which would
result in the iSCSI connection thinking it still had outstanding
SCSI tasks when the connection closed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f9c5322755462d1918fde0075c87c84295cb10c
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Make sure the function reentrant, prepare for rpc method.
Change-Id: Ie5230e4ac6c9a750e8e779c5e0b67134729c07e3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This prepares for future scatter-gather support.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie21c4d86c1e932dcaf63cf13d7a7198890595d79
Return void in main I/O path, and have functions
explicitly complete the I/O back to the bdev layer
if any failures are encountered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia729b0af555f87c2fb36b92e79a47d19a325de7a
Add public function which could be used by rpc method.
Change-Id: Id9d2938801e0acdf0f9827ef2990a54c75aec22a
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This patch removes the lock in RBD module. And it requires
the librbd library supports rbd_poll_io_events function.
Change-Id: I040a7d8369ab4f69f41d1d0233115f885168f019
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch makes lun_name:lun_id pair as one object,
the same for the pg_tag:ig_tag.
Change-Id: Ib08450d12bde9b8388d4ae41e214cc0ba64c8b1e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
