Apparently the environment wasn't getting passed to this test so
the configuration wasn't being preserved.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I65126e94c82d92fe33e81d2d0a6ef578aa506a34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2251
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The old suppressions were only relevant for the 20.01 release.
We will have new suppressions in the new release though,
so leave the plumbing to write out suppressions.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c673244dfc767c31e646fec980a02ca88be37a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use already cloned sources in spdk_repo/spdk and
create a reference build.
SKIP_ABI_TEST flag is deliberately not added to
autotest_common.sh because of it's one-time use here.
Otherwise autobuild.sh would fail if vm_setup.sh is
run for the first time on the system. There would
be no previous reference builds to use.
Change-Id: I0c32041321ca25b91acb498f852ef14e7869daf1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
There were multiple ways to check if particular UT should be executed.
This script unifies those.
To allow executing unittest.sh as standalone script,
verifying config.h flags was chosen.
FTL is an exception, as it always compiles if built on Linux.
Same condition was kept to execute the UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83b3a58d4574154166af6763e7d1c38d75b8475d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2019
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now, each bdevperf_job gets it's own bdevperf_thread. Scheduling the
jobs onto cores is left to the underlying event framework in the normal
case. In the multi-thread case, cpumasks are set on the jobs' threads to
ensure they're distributed appropriately.
Change-Id: I55f1a44b4262d715954b3a63bf00b8d2321fafca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1512
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Detect available VMD subsystems and disks to bind
to userspace for tests.
Re-run the default setup.sh configuration once
tests are done.
Additionally add verify_state_save option to
fio config, otherwise this will not pass 'git porcelain'
in autotest.sh.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5d5bded7ee214f39b96bb6ae1e82d59592629aff
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1959
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives a chance to quickly see why qemu might have failed, i.e.,
why the .pid file has not been found.
Change-Id: Ia1a5ae417164c865eede07cdb6dd4df1edc0b0b9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2005
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to make the code that's about to be written out more clear
and drop the unecessary usage of a subshell.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I024012b08fc3c29d3c37c59a42e64d8429929799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2004
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From the code, and due to lack of any help() or usage(), the way how
$disks are meant to be declared was not clear right off the bat.
Comment out how the argument should be formatted and cleanup its
usage within the code.
Change-Id: I3a4b077d5026f6f17d0ccc27183d2a89222169f5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The way how qemu cmdline for run.sh was being prepared was a bit
convoluted and simply hard to read. Instead of having it as a single
string, use it as an array and as such expand it for run.sh to use.
Change-Id: I1ee1bafbdd8a367a69c266d5a33c4d728fc0fe7b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2001
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The size of the nvmes[] was being compared against a plain string
(which in arithmetic context always evaluates to 0) due to improper
var referencing.
Fix this by using (( )) to be more flexible and not depend on the
parameter expansion syntax.
Change-Id: I56fd3b98940961475638099dc66aec5544c832c7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2000
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When grepping the log for a particular test script file,
e.g. lvol_test.sh, we get 20 matches from all the grep | sed | awk |
etc... Only the last match is the actual script execution. So
silence the first 19. They're not particularly useful anyway.
Change-Id: I96c64a1c6d79cecd4966d3c1faddbc014ea8b5b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2102
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: This can improve the performance.
Change-Id: I3f5526ab8716cb0771b5e193afa9a0dbffec5cc0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1929
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Bug introduced in:
9fc706f test/vhost: improve run_fio --local option
The original "nohup + no-wait" for spawned local VM fio
processes was probably as expected. Turns out we can't
"wait" for fio processes in some cases, and migration
is one of them.
run_fio() must start fio and exit immediately, so that
parent script can have a chance to do the migration
process while fio is still running.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3c0ab65e96bfa0b020eb42df76b14deda2b43e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1937
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes sure that we will have the hugepages we need
even on systems that don't have them configured by default.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9a0d82e0abf6363c1c037732b543c05e8931f97e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
mkfs also uses 512MiB as the default cache size, so here
we also use 512MiB for fuse, or the fuse will allocate
4096MiB.
Fix issue #1309.
Change-Id: Icb4c3a175107bb56f4f84a0b0435d05f6f44f15e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2112
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Used to determine whether IDXD isto be configured, previous check
did not work on FreeBSD, only Linux.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I70148ee2f0fffc83c2b89d2de6e81193b9357d3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2060
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Single file segments allow us to work with both
1GB and 2MB hugepages.
Change-Id: I2a455f9d23fafbf0746423f69379b74939ac2e9c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2021
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check which driver is in use for detected virtio pci device.
If it's not uio or vfio then don't use it.
Change-Id: Ibf901c71e0125394c6cb8fd1499fc723f2308010
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2018
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Drop the static configuration file from spdk repo and
generate it with save_config RPC instead. This also lets
us drop a huge wart from those test that is discover_bdevs.
Change-Id: I74b2adbc2f391a04db9acd9ac7d0e8f381b41da0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1549
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's set once in autotest_common.sh and must not be set anywhere else.
Change-Id: I575d42f2b5caa38d9836f26b8aa6e414682d9554
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no reason to require running as root, so
remove the check for that.
Change-Id: I4fa97e5a500f4715c6949b8d84bfad4b59b1c474
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1547
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove a lot of lines which don't do anything.
Change-Id: I7244c24332c36ad02634abe82ddf606f4c3faddc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"make configure" was missing.
Run "exec $SHELL" to reload current shell and use
new git thanks to updated PATH.
Change-Id: Ia92a6a3ce3ccf515a23353d91b8cde3a13b7c92b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1997
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Couple of reasons here:
- "install" should run first, as it runs pkgdep.sh which
actually installs git for all distros.
- Because of that we can remove ArchLinux and Centos7
git installation with package manager - this is already
covered by pkgdep.sh.
- install_git routine relies on wget and autoconf, which
have to be installed first.
- install_git routine (which actually upgrades git on
Centos7) makes it possible to use "git -C". Default
1.85 git version on that system does not support that.
Change-Id: I1422f8c2a1c49eb38f4253909a152a7bc99b173f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1995
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This might be a bit confusing, but it seems some of the
distributions using "minimal" install do not come with
wget installed, and it is used frequently in our provisioning
scripts. I stumbled upon this issue with Centos7, but am
adding wget for all distros, just to be sure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9621d5ce92014623d76d70c9e22d9eefa9ea0203
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1994
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
idxd support is disabled by default right now due to being
experimental. Running unittest.sh would cause failure in such case.
With this patch idxd_ut only runs when it was compiled in.
Verifying if the UT was executed is done in post_processing.py,
by verifying every 'run_test' was executed.
Meaning that CI makes sure it is executed.
resolves#1369
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iafbc84839aa9dc62ead8821da8b860e1741e3624
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2012
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT stubs weren't calling the assigned callbacks
and some weren't assering the passed values.
This will come in handy in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86eec58a28e40a93ff06b7e7c715c17d25e28818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1970
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_spdk_iscsi_opts is encapsulated and not directly accessed by outside
of iSCSI library. So do not add it to the map file of iSCSI library
and remove it from the map file of the shared build
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9202891813208329ec6b3b0e076e4f608a38ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of refering to single controller, allow to point
and check different ones.
Next patch in series will verify lack of existance
of "/dev/spdk/nvme1".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9656ac06e86c8946b45b2ffc93119d31a1ccc5ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1979
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
More tests will follow in later patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6c45b94cc17219acfae863c774fc7dbc33625c85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It seems like -S will sort only keys within given objects, but if
actual objects are in different order, the sorting results may still
differ.
To avoid this, replace -S with jq's sort() which takes entire array,
and all its objects, as an input to be sorted. This should result in
the same output regardless of the initial position of given objects.
Change-Id: I4eca9474f1cea73040ae4a13692a1074fa1c4fc3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1973
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Couple of nvme_cuse RPC operations were done as part of
nvme-cli test cases. This patch moves those out to separate
script.
Next patches in series will expand those.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia3123939901368af3570b127230f828437f39ef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
${nvme_name} refers to device name when bound to
kernel nvme driver. One of the checks modified by this patch
would return true for case when original device name was anything
other than "/dev/nvme0". Any higher number id would not exist
in /dev/spdk path anyway.
Meanwhile devices under /dev/spdk are created in order
by the SPDK, so we are sure they will start from 0.
This test only registers single nvme_cuse device so that would
be the only one.
So this patch replaces ${nvme_name} with hardcoded
value of ctrlr="/dev/spdk/nvme0" as this is always the outcome
of this test.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I521ebe68685234774e8b94175553c8c8609c0bd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1919
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The $enabled_types consisted of a newline, two tabs and a trailing
space. In that form it was checked against a string that consisted
of array items returned in a form of:
foo
bar
The check initially was failing since plain [ was splitting these
strings into multiple words without proper quoting in place. This
could be seen in the build log:
line 52: [: too many arguments
This is fixed by replacing [ with [[ and using proper quoting on the
rhs of the expression.
Additionally, $enabled_types is now converted to an array to make
the comparision more natural without worrying about the whitespaces.
Change-Id: I6e3e539f36567443b36327f3bcc083de387b8474
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1864
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were 9 function symbols removed from the global list
of the library. They were all symbols declared in env_internal.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I23210f27dc2bf23ae9e9cf76babb54e623fbc917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1708
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should help reduce confusion within libraries about
which APIs are public and which are private.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7755081b016f269d4761d8cc2ce4bac2835c077d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1703
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, increment the library version since some non-public symbols have been removed.
Please note, SPDK_LOG_BLOBFS is included in the map file because it is used by the
blobfs_bdev module.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib05c0b6630951d97b1a5b2931746471eeb9d9630
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1702
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the following warning by allocating status dynamically.
In function ‘nvme_completion_poll_cb’,
inlined from ‘test_nvme_completion_poll_cb’ at nvme_ut.c:546:2:
/var/jenkins/workspace/unittest-nightly-autotest/spdk/lib/nvme/nvme.c:92:3:
warning: attempt to free a non-heap object ‘status’ [-Wfree-nonheap-object]
92 | free(status);
| ^
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I321b88414f431c8c18617d3ee882b8ab851a70fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1940
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow multiple fio config files and fun them sequentially
in loop against provisioned Vhost+VMs setup.
This should decrease total time needed for performance
benchmarks as we can re-use current configuration rather
than provision from scratch for each workload.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0c4e37f0bb9f49f7614c8001d74d72b99470c084
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gen_nvme.sh requires that all the nvme devices are not bound to the
nvme driver which doesn't have to be the case when clear_nvme() is
called. To not depend on which driver is in use, simply iterate over
pci bus to find a proper device. This avoids additional setup.sh
ping-pong which is required to make use of gen_nvme.sh.
Additionally, upon exiting, in case mounts for given nvme device were
detected, keep the test environment reset to leave nvmes bound to the
nvme driver.
Change-Id: I428c5e2b0517553d267411a30316bde5d1ce8eef
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fio output was saved to the same file as original
fio config. For a single test run this was not an issue,
but in case we run more iterations (like in performance
tests) we cannot overwrite the original config file.
Use fio config file name (without file extension) and add
".log" to the name.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If6f9d582ff5817c85b7cbf9192530b87a2079274
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1898
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Missing space caused wrong string concatenation
when running test with multiple VMs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I594035b3c5c952cf74e4b6c2002e975f82e303a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1896
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
None of these operations need to occur on the job's thread, so just do
them in a simpler loop on the master thread during shutdown.
Change-Id: I6fda3c4b37c206e9e1e43af9d1a49a2e83afcd67
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1872
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can collapse the two loops at exit time into one this way.
Change-Id: Iffe06e03c54fadc605e168580b69d2c710ac1168
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1849
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is going to be used in the shutdown path, so move it
up to avoid having to forward declare it.
Change-Id: Ia5e4d9ef4290f6d67528ee7d3f8a2e15bc39868d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1870
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As we move to more complex job definitions, it will make more sense to
print the stats for each job separately, rather than grouping by
reactor.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a94c36a5d272ae406b0b201dc05ec020ab651a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No reason to delay until the I/O submit function. Do it up front
and fail if it can't get one.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I646bc68f8dd7207667e546f7be44464909fa2cc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make these two separate code paths so normal mode doesn't need
to do an spdk_for_each_channel and iterate every thread just
to get to the single thread it wants to build a job on.
Change-Id: Ibe57b3f3d4f990550ef4f5da93cb8ca54ae3ab85
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1510
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are the final test cases from the series of ports, thus clean up
the python script and its lib as well.
Change-Id: I9923fc93fbeb8c2d54dd2dad5acae41eaf5cfff5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
