This will disconnect all connections to a subsystem from a given
host identified by HOSTNQN.
Change-Id: Ibc9cea1f08a58a05dbac3a0bb47df8d8a58e7c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Add an new API spdk_nvmf_subsystem_add_ns_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
spdk_bdev_open() has been replaced by spdk_bdev_open_ext() but the
issue still existed.
Update the corresponding unit tests accordingly.
Then replace the internal of spdk_nvmf_subsystem_add_ns() by
spdk_nvmf_subsystem_add_ns_ext() call.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifcaa2121129ef22d5e61c9a8f7c640ff37a64485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4485
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
a pause
This now also takes a lock instead of requiring a pause of the whole
subsystem.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7de174f3f56d2b3767e723387c4f2257107d8b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The list of allowed hosts is only checked during handling of CONNECT
commands - not in the main I/O path. Protect that list with a mutex
instead of requiring a full pause of the subsystem to allow
dynamic management of the allowed hosts without impacting any
active I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3f7e87cc1fa6de200c422928c07153fc60fab28c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This saves 2 bytes and allows it to pack nicely with the
changing state bool (which must remember separate for atomic
operations).
Change-Id: Ibb92ae3c74306e60385ae23d0aaf877f33a69095
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4553
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an internal API nvmf_subsystem_set_ana_state() to change the
ANA state of the subsystem listener whose trid matches.
ANA optimized state, ANA non-optimized state, and ANA inaccessible
state are supported. ANA change state is not used and ANA persistent
loss state is not supported.
After changing the ANA state of the subsystem listener, on each poll
group, controllers, whose the subsystem listener match, send ANA
change notice.
Initiators query ANA log page anyway if they receive ANA change
notification. False positive notification should be avoided but is
acceptable.
To avoid any concurrency conflict, simply compare ctrlr->listener and
the passed listener.
It may be better to execute nvmf_subsystem_set_ana_state() on the
subsystem thread but currently the RPC thread adds and removes a
listener to and from the subsystem, respectively, and the subsystem
has been suspended while executing nvmf_subsystem_set_ana_state().
Hence we keep this as a future enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If1910b79dd33d904114e258ae2c5e868947cdc52
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4079
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
If we are already in the desired state,
just call the callback directly from the
subsystem_state_change function. That way
we save a lot of message passing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6cf8563524610d9125d53266e3c0e179e064bf63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3760
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is important to avoid doubling up on state changes
and hitting asserts.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If8797ea13a5c224cee85e53e9b2542012423b37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3759
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no need for this interface to be async.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1f21b53e90b7d165b6b5fb2e1226ce7591966b58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can happen and we should be prepared for it.
Maybe fixes: issue #1416
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I77f48dbcabf702f88df56ad7e866bbcb830fc239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3393
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add ANA state to struct spdk_nvmf_subsystem_listener and initialize
it to optimized.
Then ctrlr->listener->ana_state is referred when creating ANA log page.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I978424e51d3f23ca72dee30192bc2693abfe203d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4012
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will be used in another place later.
This patch is part of a series aimed at improving recovery
when we are fail to change the subsystem state.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24bfbeb3d006584003164540d6ede540dbcafa86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3392
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
After supporting ANA reporting by default, Linux kernel 5.3 reported
error when parsing NVMe ANA log. The newer kernel fixed the issue
but we should optionalize ANA reporting feature to avoid error for
Linux kernel 5.3 or before.
Add a bool variable ana_reporting to struct spdk_nvmf_subsystem
and disable ANA reporting and initialization of related variables
if it is false. We can expose MNAN (Maximum Number of Allowed
Namespaces) even if ANA reporting is disabled. But MNAN is not
required if ANA reporting is disabled. So do not set MNAN if it is
false too.
Add a public API spdk_nvmf_subsystem_set_ana_reporting() to set
ana_reporting by the nvmf_create_subssytem RPC.
The next patch will add ana_reporting to nvmf_create_subsystem RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc77773b4c9513daba2f1a9fdaf951d80574f379
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To avoid the strange formatting, typedef has been used. But this
comment is hard to get the meaning. So stop breaking after return
type for this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia03d6ec50610c395007fe172018b890733dce599
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It fixes memory leak e.g. when add_listener rpc called twice with the
same trid on the same subsystem (ref = 2). In such case kill or
remove_listener decrements ref only once.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib19f2e50838feff1c9108957ee82a42da66e54a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function previously accepted a trtype enum, but needs to be able
to accept a string to support custom transports.
Change-Id: I931aed30ca3be65468552ffa1bb1ef3f91275fda
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF target requires 128-bit identifiers for reservations,
so the extended report format must be used. If the user issues
a reservation report command without the extended format bit set,
the specification says to fail it with the HOSTID_INCONSISTENT_FORMAT
error code.
Change-Id: I2382af4f69167322d8e2c3f06cf8d9042830a70c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Enables access control to allow subsystem access on one or more FC ports.
If a subsystem definition does not have a single valid "Listen" directive,
then the subsystem will allow dynamic listen address binding. For such
subsystems,
* When a FC port comes online, FC transport will add port's address
to subsystem's listen list.
* When a FC port goes offline, FC transport will remove port's address
from subsystem's listen list.
If subsystem definition has 1 or more valid "Listen" directives then FC ports
coming online or going offline will not affect subsystem's listen address
whitelist.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ic7fed76e4bf8d1df0aeeae1d4fa5e6d207afccf3
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471025
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With this change we only check the subsystem state once.
Previously it did it twice, and with a different order
(once PAUSED || INACTIVE, the other INACTIVE || PAUSED).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idef44accc69dccb9d161b8f04b9d5d3bbbf9e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Load reservation information based on ptpl configuration file, and
restore the information to NS data structure.
Change-Id: I5f46d49a6d1e6e49aab93ca7cd654469a3a08659
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Maximum size of NQN is already defined to be SPDK_NVMF_NQN_MAX_LEN,
and hence use fixed size string whose size is SPDK_NVMF_NQN_MAX_LEN
+ 1 for spdk_nvmf_vhost::nqn.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b9c7cc21200b3e88b5485ebfdcd5040bc6e3589
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add file based reservation information definition, the data structure
can be used to store all the reservation information to a json
based configuration file, and enable this feature with REGISTER
command.
Change-Id: Ic93cfc5934a4ad96f11b96ec77bacb877edf6c10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If users set the persist through power loss configuation file,
that means the Namespace has the capability to support ptpl
feature, here we added a ptpl_activated flag to indicate that
the users enable the feature or not. Users can use Set features
or Reservation Register commands to change the value.
Change-Id: Iae3fd44085c5be5bf9574e49efa567e8212dee20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
