SPDK shouldn't use `free` to free the memory allocated by rte_zmalloc_socket.
Otherwises, the vhost-blk/scsi will continuously crash.
In this patch, SPDK don't free the dpdk allocated memory,
DPDK will free it finally. Add a flag to indice the resubmit handle.
Change-Id: I85fd84b7d27a091830006a0f84d541c48290cbb3
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will actually run the CONFIGURE_AER state for
discovery controllers in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib114beb886ab4b9214e4525479eb5ec7e038e5d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
in case of failure groups shall be destroyed
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I8933f4128a7a3361bbb55d6a9c08a540521e5bda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Doorbell offset starts from 0x1000 is defined by the NVMe
specification, so rename it to remove `VFIO_USER` prefix.
Change-Id: Ie34b12b3d2618f9b0ad0cf7ccbb103ad2c900f47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10364
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculate supported maximum number of queue pairs based on
BAR0 size, this value isn't allowed to change at runtime, also
define BAR4/5 based on number of MSIX vectors.
Since the maximum number of queues is a large value(512), so we
still define a default value when starting, users still can
overwrite this value with a number no greater than 512.
Change-Id: I1b4b6bdf2ff9d129c8bdd493ffdf0a51f8772d51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10334
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will save a copy inside the library.
Change-Id: If7bb052b03fb92e46abe50fa945b812d149ef01d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10363
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d9561c444f.
This patch is incorrectly iterating the CPU mask assuming it is
contiguous. However, rather than fix it, let's just let the kernel
scheduler place the thread where it thinks is best. It's going to prefer
idle cores anyway. So reverting is the simplest way forward.
Change-Id: I7b66cce7bfb6ddb108aa7576f508aa3b02b79138
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10475
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These can produce a lot of output, which doesn't really give any
additional information.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I572cd203d61c717ce6400f67ef27ec1d7bb54c0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
adding transport to tgt should be the last step
also there is an issue before change i.e. if calloc failed then
transport remains on the list
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iaf29cfc7b0f535d40160c6fdf9ef6a7e6bfb127c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10429
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For error case, just set ctrlr->num_aers to 0, and
then the loop won't execute at all. This avoids an
extra call to nvme_ctrlr_set_state() and simplifies
the code a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff7bbf6e03d18b5f553b9e8527b4c803db583917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10330
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Discovery services using the SPDK nvme driver may
use long-lasting connections that detect AER completions
to determine when there are changes in the discovery
log. This means that we still need to send keep alives
on discovery controller admin queues. So move the
SET_KEEP_ALIVE_TIMEOUT state immediately after
IDENTIFY, and run the SET_KEEP_ALIVE_TIMEOUT state
even for discovery controllers.
Note, we need the IDENTIFY's KAS value to properly
set the keep alive timeout, so we have to keep the
IDENTIFY state before SET_KEEP_ALIVE_TIMEOUT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6403c28fb72d42629c5f9009a89c4bfd44d162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Keep alive is valid for discovery controllers, so don't overwrite
the value requested with zero in nvme_fabric_ctrlr_scan().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7dcda6ebf4ab1c8a9085e4e3a02b814d8e586a97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10328
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Next patch in series will look up the struct spdk_sock_group_impl
from spdk_sock_group in spdk_sock_get_optimal_sock_group().
Since this is third place it will be used, make this function common.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43d6472016782e78709c1d52aa74abf594e5bfe6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10347
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When no optimal poll group exists for a qpair,
assignment for round robin happens in spdk_nvmf_tgt_new_qpair().
RDMA transport implments the logic for this assignment in
nvmf_rdma_get_optimal_poll_group().
TCP relied on the spdk_nvmf_tgt_new_qpair() instead.
This resulted in race condition when looking up and assigning
optimal poll groups - see #2113.
To remedy that, TCP now follows the same pattern as RDMA.
Next patch will improve the sock map lookup to fix the #2113.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I672d22ac15d06309edf87ece5d30f8e8d1095fbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a bad memory corruption where the code for CUSE attempts to write
one byte (with value 0x1) after the memory is freed.
Context:
When the CUSE device is unregistered, the poller thread is signaled with
fuse_session_exit(), which writes the value 1 to fuse_session::exited.
The poller thread then detects with fuse_session_exited() that it must exit
the routing and finally destroys its own fuse session with
cuse_lowlevel_teardown() before it exits.
However, FUSE may also call fuse_session_exit() for its internal purposes.
I'm not sure exactly under what conditions that happens, but I added
some trace messages and I could clearly see that the CUSE thread exits
before it was requested to exit in cuse_nvme_ns_stop().
If the poller thread early-exits, it would destroy its own FUSE session
(and free the memory) before fuse_session_exit() gets executed, causing
the memory to be corrupted with a single byte of value 0x1.
Reproducer:
The bug can be reproduced by resetting the FUSE session to NULL after it
is destroyed. This will cuse_nvme_ns_stop() to crash with a segmentation
fault in fuse_session_exit() because it tries to access a NULL pointer.
static void *
cuse_thread(void *arg)
{
[...]
free(buf.mem);
fuse_session_reset(cuse_device->session);
+ cuse_device->session = NULL;
pthread_exit(NULL);
}
This fix:
The fix I suggest is to destroy the FUSE session with
cuse_lowlevel_teardown() after the thread is joined.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I47202891a358f139506845110b012f840974b6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9931
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvme_ctrlr_free_io_qpair can be called when
qpair is already disconnected. In that case qpair's
state is changed to NVME_QPAIR_DESTROYING and
transport's ctrlr_delete_io_qpair callback is
called. RDMA and TCP transports call
nvme_transport_ctrlr_disconnect_qpair in
the callback and since qpair's state is
not DISCONNECTED or DISCONNECTING, qpair
is disconnected for the second time.
If spdk_nvme_ctrlr_free_io_qpair is called
when qpair is in ENABLED state than nothing
changes, qpair will be disconnected before destroy.
PCIE/vfio_user don't implement transport disconnect
callback, so they are not affected.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I23e11856ecafb51669acf4a3118be049c11eecda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I58794b7b946eeb8ff82512905af0a296e3b534aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9817
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a parameter which determines the owner of the
map - target or initiator. It allows to set different
access flags when creating Memory Regions
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0016847fe116e193d0954db1c8e65066b4ff82bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10283
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit test test_nvme_cuse_stop() manually creates 2 cuse devices
and executes nvme_cuse_stop(). Problem is that the Fuse session is
never initialized for those 2 cuse devices, causing cuse_nvme_ns_stop()
to access 'ns_device->session', which is a NULL pointer.
This bug is detected by ASAN as follows:
==77298==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000180 (pc 0x7fdac6d7d40e bp 0x000000000000 sp 0x7fff74768320 T0)
==77298==The signal is caused by a READ memory access.
==77298==Hint: address points to the zero page.
0 0x7fdac6d7d40e in fuse_session_destroy (/usr/lib64/libfuse3.so.3+0x1640e)
1 0x40dc7a in cuse_nvme_ns_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:851
2 0x40df59 in cuse_nvme_ctrlr_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:923
3 0x40f103 in nvme_cuse_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:1094
4 0x415803 in test_nvme_cuse_stop /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:393
5 0x7fdac724c1a6 (/usr/lib64/libcunit.so.1+0x41a6)
6 0x7fdac724c528 (/usr/lib64/libcunit.so.1+0x4528)
7 0x7fdac724d456 in CU_run_all_tests (/usr/lib64/libcunit.so.1+0x5456)
8 0x415a4e in main /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:415
9 0x7fdac62351e1 in __libc_start_main (/usr/lib64/libc.so.6+0x281e1)
10 0x403ddd in _start (/home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut+0x403ddd)
The fix is to call fuse_session_destroy() only if the fuse session is != NULL.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I41881243227d83e8d1e6b90e72c1b6d62ccd98d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10225
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We allocate from the head, so it's better to free to
the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c32244f446bd7a1df12eefc81245b3ef7e24070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We allocate tasks from the head, so it's better to
free them to the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67c23e3d89cda16f94b1770eada5465015ddb6ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NOTICELOGs really clutter the output during
application start - it's better to make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ae37d5d057d7b972017befbc0834de414b9710b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This limitation doesn't really take effect currently,
since the typical number of slots per channel isn't
bigger than MAX_COMPLETIONS_PER_POLL. But there's
no reason for this limit anymore - we should always
poll as many completions as we find.
It's better to remove this now, in case we have
configs in the future with higher number of slots
per channel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d90d41e5142622b79d9765fbc62da1516e2b8be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10189
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_bdev_io_get_nvme_status() does not follow NVMe abort command
about return values.
NVMe abort command sets completion status to SUCCESS both for success and
failure cases and differentiates only the bit 0 of cdw0.
lib/nvmf do not use spdk_bdev_io_get_nvme_status() but checks only
success or failure at completion.
So there is no issue now but let spdk_bdev_io_get_nvme_status()
follow NVMe abort command. In future, the user of spdk_bdev_abort()
may use spdk_bdev_io_get_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4a08056bd8a1aee4c400f72ef5de7c68e23990b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9977
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The pointer to struct spdk_nvmf_ctrlr is used to save mandatory
controller registers to the migration region.
Also rename some ctrlr/qpiar to vu_ctrlr/vu_qpiar.
Change-Id: Ifcb862bf4543a9df3c62d3b0a57b7f93228ccaba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
1. use the transport lock to protect transport endpoints list.
2. don't use mixed errno and -1 as the return value, use -1 for all error cases.
Change-Id: I657fa06a6d82ee8dbeefaa3397df2285ba574b80
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When destroying controller, we will disconnect each connected qpair,
and in the spdk_nvmf_qpair_disconnect() call, qpair_fini() will also
try to hold the same lock, so existing vfio-user implementation assume
that qpair_fini() will not be called in the same context. Patch
https://review.spdk.io/gerrit/c/spdk/spdk/+/8963 remind me that
vfio-user has this issue. While here, we add one more thread poll
to avoid such issue.
Change-Id: I83b82ddcce3eb54c724291223e794dcb53a08059
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9998
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For live migration support in vfio-user transport, we need to pause
the subsystem when starting migration in source VM, then after
migration, the subsystem is in paused state, when exiting the
application, we will call spdk_nvmf_subsystem_stop() at last,
and existing code will assert this case.
Change-Id: If5214c45973b27f6092c4a6d71ede336e54d89e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9407
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
The recent changes merged multiple Data-OUT PDUs within the same
sequence into a single subtask up to 64KB.
However, they were not enough.
For a large write operation, the hardware iSCSI HBA host sent an immediate
data whose size was not block size multiples and then more solicit
data through R2T exchanges.
One example for a 64KB write operation was as follows:
host sent SCSI Write with 5792 bytes and F = 1
target replied a R2T
host sent Data-OUT with 15880 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 2848 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 5744 bytes
host sent Data-OUT with 12200 bytes and F = 1
The hardware iSCSI HBA host can decide the size of the unsolicited data
but the SPDK iSCSI target can require the host to send the solicited data
whose size is block size multiples.
Hence we merge immediate data to the following R2T data if the immediate
data is not more than 64KB and more R2T data come.
Add another test case to check if the fix works for the above example.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4906b4e1a8b61e08862f4ccc27a6caf165126530
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This clean up will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ad288ec16aec69a168e0f3019b68e11132b65c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue: spdk_top tracked pollers by the poller name string and the
thread_id they are running on. This shows incorrect stats when
multiple pollers exist on the same thread with the same name.
Solution: Added a unique poller id for each poller on a thread and
to allow spdk_top to track pollers by thread_id and poller_id.
Signed-off-by: Michael Piszczek <mpiszczek@ddn.com>
Change-Id: I1879e2afc9a929d1df9e8e35510f0092c5443bdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5868
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Wait until the namespace is attached, where it does this operation
again. As of this commit it doesn't really matter because it is just
filling in some values in a structure and if it does it twice it's not a
problem. But later when we only allocate active namespaces, we do not
want to allocate the namespace twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie28653b178975d1ca80bf71ca6b5095224f1c5d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function destructs a single namespace and removes it from the
controller.
Change-Id: I4b7b3576beda85c9ddad4e0f2db6d1964fa72b82
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10024
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was sometimes used as the maximum array index and sometimes as the
maximum count. Make it consistent everywhere and give it a better name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I518efd99a7d36584624490b0b3497bb6e81ce9ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
list
The list should always be null terminated, but add an additional layer
of buffer overrun protection.
Change-Id: Iee31057fdca5ec4a6177615dff5171e5cb07984e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10027
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This quirk was already applied to the 0x0A53 SSD, but is
likely needed on 0x0A54 as well.
Possible fix for issue #2231.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I36a48ab92d1698a411472f714b5108413bbc3c56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10162
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
