Based on requirement of initializing SPDK env
from a DPDK application, relative to spdk_env_init,
add spdk_env_dpdk_post_init for calling after rte_env_init.
More details, visit
https://github.com/spdk/spdk/issues/529
Change-Id: I6fda1593e0296ef93b705e31cc76bcd0d248673a
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 18.11+ does its best to ensure all devices are
equally attached or detached in all processes within
a shared memory group. For SPDK it means that if
a device is hotplugged in the primary, then DPDK will
automatically send an IPC hotplug request to all other
processes. Those other processes may not have the same
SPDK PCI driver registered and may fail to attach the
device. DPDK will send back the failure status and the
primary process will also fail to hotplug its device.
To prevent that, we need to pre-register the pci
drivers on env init.
We register the drivers just after the EAL init
because we don't want the matching devices to be picked
up by the initial bus probe in DPDK. That's for 2 reasons:
1) we don't want to attach *all* available devices
2) devices attached from non-SPDK context (that is,
outside of the spdk attach or enumerate functions)
will still fail to attach - the entire attaching
process will only take significant amount of time
and will bloat the log with useless status messages
Change-Id: I7b4c3a2e355f98ea755649f789137f5a727bc935
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow specifying a custom hugetlbfs directory.
This can be useful e.g. when trying to use hugepages
with fixed size, different size limit, or different
access permissions.
Change-Id: I418cbab99ed183383300b3c3d9945095a03478db
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432105
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 18.11 sets the default base-virtaddr to an address
that falls into an area reserved by ASAN. DPDK will try
to remap its memory over and over with the closest
base-virtaddr hint and for ASAN case this would take
a huge amount of time.
This was already raised on DPDK mailing list [1] and
might be eventually fixed or worked around in upstream,
but for now let's just override the default base-virtaddr
to a value that ASAN is known not to occupy.
[1] http://patches.dpdk.org/patch/46130/#88395
Change-Id: Ieada30e82355e8ead458e53795ab98cd12692c1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431257
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With all SPDK patches in place, we can now enable dynamic
memory management for all DPDK versions >= 18.05.1
Hugepages can be still reserved with [-s|--mem-size <size>]
option at application startup, but once we use them all up,
instead of failing user allocations with -ENOMEM, we'll try
to dynamically reserve even more. This allows starting DPDK
with `--mem-size 0` and using only as many hugepages as it
was actually necessary.
Change-Id: I9e6f58ea50af2234f96a53e7a32d9e14d2df65ff
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/426828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
eal_get_runtime_dir() that we used so far is not
available in DPDK shared libraries, so we remove
its usages in SPDK together with the functionality
of removing files left over by DPDK. Luckily for
us, this only affects DPDK 18.05, as for DPDK 18.08+
the --no-shconf option that we use prevents all
those files from being created whatsoever.
Change-Id: I078fb7686d2445a6acb067b0c3762a9c99f9a429
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/426218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Dynamic memory management was broken in DPDK 18.05
and got fixed in 18.08/18.05.1, but SPDK still needs
a couple of patches to ensure we support it. While
those patches slowly make their way through the review
process, let's stick with legacy mem mgmt for all DPDK
versions.
Change-Id: I6a0bc7b46b28dd75bef6847dde1ef57dc60a829e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/426817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows us to avoid creating a shared configuration file in the dpdk
rte directory.
Change-Id: Id57d9111669ee8fd51e82c0b05e8c2c07b6dcd7e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/421652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that DPDK can reserve additional memory on the fly,
the initial requested memory only serves as preallocation
and it makes sense to request no preallocated memory.
Right now, passing `--mem-size 0` counterintuitively
tries to reserve all hugepages on the system.
Change-Id: I281900efc7bd0bbb7eed30161ba0b88e16195170
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422241
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 18.08 includes the fixes we proposed
and we're now ready to make the switch.
Change-Id: Ie5abf25480d2449cb2c8e23de10c8090fc7b14fb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422240
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 18.05 introduces a new "runtime" directory,
which contains hugepage metadata to be accessed
by secondary processes. There may be multiple
files per each memseg and we cannot easily predict
their count, so this patch deletes all regular
files in that directory.
$ ls -l /var/run/dpdk/spdk_pidX
total 16784
-rw------- 1 root root 4096 Jul 27 15:10 fbarray_memseg-1048576k-1-0
-rw------- 1 root root 188416 Jul 27 15:10 fbarray_memzone
-rw-r--r-- 1 root root 16974144 Jul 27 15:10 hugepage_data
-rw-r--r-- 1 root root 12432 Jul 27 15:10 hugepage_info
srwxr-xr-x 1 root root 0 Jul 27 15:10 mp_socket
The DPDK config file is not located in this directory
yet to preserve some of the backward compability.
Eventually, it will moved there as well.
Change-Id: I61cf1a47b306b51b0817c9d870841508f1e5e604
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently passing pci whitelist and blacklist information to DPDK is done
by using single dash option -w and -b, respectively.
However this didn't work as reported in the Github issue #362.
Hence use two dashes option --pci-whitelist= and --pci-blacklist for
pci whitelist and blacklist, respectively.
In the Github issue #362, more issues are reported. These will be done
in subsequent patches.
Change-Id: I4e36edfce90e34577e34605d5b19658554fb2496
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK holds off with using the new dynamic memory allocation
mode just yet.
Change-Id: I75541135a020c691d981d2b16e7c9509b1cc57b1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419567
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK has an option "huge-unlink" which can be used to
remove mmapped files after EAL initialization, SPDK
doesn't enable the option by default, ethier DPDK,
while here, export a new parameter which can let
user to decide enable it or not.
Fix issues #349 and #350.
Change-Id: Ic516b9f48f7b1c7c51712cc7bb7475ed904ff24b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ASAN has some memory address regions that it will not
allow applications to use for mappings (including mmap).
So when specifying --base-virtaddr to DPDK for
shared/mutli-process mappings, pick an address that
ASAN will allow the application to map.
Ref: https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm
We will still disable ASLR while using the test stub for now.
Maybe we can eliminate this too in the future, but for now just
modify the autotest_common.sh comment since we've figured out
how to keep ASAN from messing with the mmap hint.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie24fd35bd22aa3ceab6271e8936775b157e5c330
Reviewed-on: https://review.gerrithub.io/416420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Ioat config's Whitelist is late for DPDK EAL and single application
occupies all IOAT copy engines.
Change-Id: I8749f740ff1bec5bb022b39fc2256880369b467a
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/405911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This makes use of the `--single-file-segments` DPDK param.
Change-Id: I21ddd955841748ea087c0d006875514be56f2107
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/401112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I738b4e28065797c9df7b0bc27ec0aee8c9f4f257
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
There is no need to wait until an atexit() to unlink these - we can do it immediately
since the open refs will still be valid.
Note: changed the remove() calls to unlink() to be more precise, since these are
files and not directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib160131bcf3beb9783c6fc4de021f64c43c943a9
Reviewed-on: https://review.gerrithub.io/382697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Documentation of rte_eal_init() lie. At least two parameters (huge-dir
and file-prefix) are held and used internally trought the lifetime of
application.
Change-Id: Ie418b5f2b0d7fbea5c217e47a555a520d3256360
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/382677
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In multiprocess applications some shared memory files are left around
after a primary process exits because they can be used by secondary
processes to init memory. However, all primary dpdk processes create
these folders so we need to delete them after a single process spdk
application exits.
Change-Id: If51be95811fb66632316ae260762e5291641b537
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/381721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes the separation between the vtophys map
and the generic memory map code clearer.
Change-Id: I3e8686e432a4594339008698de156d3978e9768a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375640
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Remove dpdk_ prefix in spdk_app_opts and spdk_env_opts
Change-Id: I6f231f67072b808e84945d41b1fe31a180beb350
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365787
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch, we also update perf and identify
examples. If there is no local nvme device info
parsing, we will set dpdk initialization with no-pci
choice.
Change-Id: I58b2d291b7b53894aeb194a16798ff1c72cf25b4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK's use of getopt() needs special handling of the optind global
variable since we are passing it a separate array of arguments (not the
typical argv and argc). Set optind to 1 internally to env_dpdk so that
the apps don't need to know about it, and restore optind in case the
calling app is also using getopt().
Change-Id: Icbf07002c99fa9f94c866e8eff707124b0ef679b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365062
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These options are only necessary for applications that intend to be used
in a multi-process configuration.
Change-Id: I3e1fa0682611d92267d0ad1b3f2016dc926b96b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
