Many parts of the blobstore.c seem to have gone with the assumption that
blob creation, deletion, etc. all happen on the md thread. This
assumption would allow modification of the bs->used_md_pages and
bs->used_clusters bit arrays without holding a lock. Placing
"assert(spdk_get_thread() == bs->md_thread)" in bs_claim_md_page() and
bs_claim_cluster() show that each of these functions are called on other
threads due writes to thin provisioned volumes.
This problem was first seen in the wild with this failed assertion:
bs_claim_md_page: Assertion
`spdk_bit_array_get(bs->used_md_pages, page) == false' failed.
This commit adds "assert(spdk_spin_held(&bs->used_lock))" in those
places where bs->used_md_pages and bs->used_lock are modified, then
holds bs->used_lock in the places needed to satisfy these assertions.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0523dd343ec490d994352932b2a73379a80e36f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for first
io_unit belonging to an allocated cluster or first io_unit
belonging to an unallocated cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I0c632e2b3dfd2e96aa22e21796e25a36f2f55f9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
When a new cluster is added to a thin provisioned blob,
md_page is allocated to update extents in base dev
This memory allocation reduces perfromance, it can
take 250usec - 1 msec on ARM platform.
Since we may have only 1 outstainding cluster
allocation per io_channel, we can preallcoate md_page
on each channel and remove dynamic memory allocation.
With this change blob_write_extent_page() expects
that md_page is given by the caller. Sicne this function
is also used during snapshot deletion, this patch also
updates this process. Now we allocate a single page
and reuse it for each extent in the snapshot.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815a4c8c69bd38d8eff4f45c088e5d05215b9e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12129
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These function accept optional spdk_blob_ext_io_opts
structure. If this structure is provided by the user
then readv/writev_ext ops of base dev will be used
in data path
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I370dd43f8c56f5752f7a52d0780bcfe3e3ae2d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11371
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
An spdk_bs_opts structure is sometimes partially initialized due to
using sizeof(opts) (struct spdk_blob_opts, 64 bytes) rather than
sizeof(bs_opts) (struct spdk_bs_opts, 72 bytes).
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Iaaa89bb419f66969d0888f49f8991c35b3dc5ea4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11268
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is situation that num_extent_pages is zero and original pointer is
also NULL, the realloc() could return a Not NULL pointer.
Related UT has been added and updated.
1) In the default allocation (num_clusters == 0), the extent_pages is not allocated as expected.
2) In the thin provisioning allocation (num_clusters != 0), the extent_pages will be allocated if extent_table is used.
More related information as below:
The crux of the problem is that according to POSIX:
realloc: "If ptr is NULL, then the call is equivalent to malloc(size)"
malloc: "If size is 0, then malloc returns either NULL or a unique pointer value that can later be successfully passed to free"
blobstore was relying on realloc(NULL, 0) always return a unique pointer value, and not NULL. This is not portable behavior.
Change-Id: Ibc28d9696f15a3c0e2aa6bb2371dc23576c28954
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using `bs_allocate_and_copy_cluster()` instead of a zero-length write
makes it possible to inflate/decouple snapshots, as the writes would
fail with -EPERM, because the snapshots are marked as read-only.
Additionally, zero-length non-vector requests are now completed
immediately. It makes it consistent with the vector path (which already
does that) and allows us to use the zero-length reads as a context for
cluster copy.
Fixes#2028.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib7fdee352972ecf808833aa179820d85cfab7eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes#1933
When decoupling parent the updated parent_id was
not persisted to the blob if it was a snapshot.
Due to having md_ro set to true, blob_set_xattr()
failed.
Later on the incorrect parent_id could cause troubles
like in the github issue, when deleting that snapshot.
This patch adds return code check for blob_set_xattr
and forces md_ro to false during blob md sync.
Since some of code paths are shared between decouple,
inflate and clone operations, the final callback for them
is doing revert of the original md_ro.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If017455f72e4d809fe533d9f986e5ae6bb8e2035
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New UT verifies number of extent page writes for
thin provisioned blobs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6b52195d26c3c1414ca862b03e8a3043bbe29b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch addresses couple issues:
1) Before issuing the md syncs the previous steps in test left
blob state in dirty state already. The resize never had a chance
to apply. This patch adds a proper md sync and polls for completion.
2) Changing blob state is something that should be done via API.
In order for dirty state to apply immidietly set_xattr is now used instead.
3) Verify test state in callbacks to make sure not only the number of
completions is correct, but their order.
This patch is introduced because of the test originally worked
only because of the extent pages always writing out its pages.
The second sync always was delayed because of this.
Meanwhile that should not be the case, since no MD or EP modification
was done.
Later in the series Extent Pages are fixed, but this test remained incorrect.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac17c27f6ff83f2b79835aa6e48472d5293c44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The purpose of this patch is to make spdk_bs_opts
for compatiblity issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I26d2a6bc644feede64d48890c7903f224b1fc306
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5681
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Search for md_page to be used as extent page started
from 0, which is completely valid md_page.
This page can be free when for example blob with id 0
was deleted and some other requested a new page for extent.
There are already existing blobs that have extents
pointing to 0, which means unallocated.
Unfortunetly it means 0 can never mean md page 0.
If that already occured for someone, this extent page was already
lost during blob/bs reload and nothing can be done.
With this in mind following assumptions are made for extent pages:
- 0 means unallocated extent page
- UINT32_MAX means we ran out of md pages, and should not be persisted
- [NEW] extent page can never occupy md page 0
That last one is new addition in this patch.
bs_allocate_cluster will now always try to find md page from 1 or higher.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia17ce5bbca2fab4fb4487e4e263f3a0aa120bf17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When loading a blob and parsing its metadata,
the array of pages was not updated.
Serialization was unaffected, since the current pages
array is unused there.
Behavior was working correctly for first page,
but did not for any blob with more than one page.
Unfortunetly blob_persist_zero_pages() never zeroed out
the pages, neither blob_persist_zero_pages_cpl()
released the md pages.
Resulting in md pages being claimed even after blobs
deletion.
This patch now fills out the active pages array with
the appropriate page numbers from metadata.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ff1f4fe95684119d283c2471fdbbea464da8151
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We still need to be able to explicitly set specific
bits in the cluster array during initialization and
loading (especially recovery), so we use a bit_array
during load, and then convert it to a bit_pool just
before calling the user's cmopletion callback.
This gives a roughly 300% improvement over baseline
on a benchmark which does continuous resize operations.
The benefit is primarily from saving the lowest free
bit rather than having to always start at bit 0. We
may be able to further improve this by saving extents
in the bit pool as well, although after this patch,
the benchmark shows other hot spots different from the
bit search.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb1d75d8348bc50560b1f42d49dbe4d79d024619
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test repeatedly creates and deletes blobs to
confirm that the used_md_pages and used_clusters
bit arrays are managed properly. This test exposed
the bug reported in #1590 which has now been fixed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-ID: If5d7b7f03cc2fb9daac928573c73430b74ea9a51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4038
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We only create one spdk_blob object for a given blob, and just
increase the ref_count if it is opened multiple times. bs_open_blob
would do the lookup for existing opened blobs.
But if the blob is opened again, before the previous open operation
has completed, we would end up with two spdk_blob objects for the same
blob.
Solution is to do another lookup when the open operation completes.
If we find the blob, free the one we just finished opening and return
the existing one instead.
Also added unit test that failed on the existing code but passes now
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Mike Cui
Change-Id: I00c3a913b413deddf06f0b63f7a669efb2b5658f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3855
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
super->clean value signifies if blobstore was unloaded
cleanly.
If it was not, then during bs_load the _spdk_bs_recover()
procedure if called.
Meanwhile bs->clean is always set to 1 after load, causing very first
blob_persist to also re-write super block with the super->clean
set to 0. To signify that md has changed and possibly trigger
the recovery if clean bs unload does not occur.
When the re-write of super block succeeds the bs->clean is set to 0,
because further re-writes of super block are not needed on next
blob persist.
This patch resolves issue when:
1) reading super block fails - execution should backoff, to prevent
writing an empty buffer as super block !
2) writing super->clean = 0 to the super block fails - execution
again should fail, and bs->clean should not be set to 0. It will
cause next persist to attempt re-write again.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia07cc5c6c107310059b50886edb7283c176b9169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change verifies that not only it is possible to open
the snapshot, but also the spdk_bs_create_snapshot() reported
success.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifb7fcc91802c838710f1f9be41090057268a5900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blob_create_snapshot_power_failure() test always attempted
snapshot creation until the snapshot did open.
Which meant that on bs reload after dirty shutdown,
the original blob might be in unrecoverable state.
UT did not verify create call beyond that point.
Next patch will stop after snapshot is possible to be opened,
AND the spdk_bs_create_snapshot() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not open.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1901b29a8319b2203a855e7879821ed3850f4917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In general it is not possible to delete snapshot when
there are clones on top of it.
There is special case when there is just a single clone
on top that snapshot.
In such case the clone is 'merged' with snapshot.
Unallocated clusters in clone, are filled with the ones
in snapshot (if allocated there).
Similar behavior should have occurred for extent pages.
This patch adds the implementation for moving EP from
snapshot to clone along with UT.
The UT exposes the issue by allowing delete_blob
to proceed beyond just unrecoverable snapshot blob.
Fixes#1291
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib2824c5737021f8e8d9b533a4cd245c12e6fe9fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1163
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
blob_delete_snapshot_power_failure() test always attempted
snapshot deletion until the snapshot did not open.
Which meant that on bs reload after dirty shutdown,
the snapshot was in unrecoverable state.
UT did not verify delete call beyond that point.
Next patch will stop after snapshot is unrecoverable,
AND the spdk_bs_delete_blob() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e14e8dadaaef4aa3287ebd376465253466b2362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new setup/cleanup functions for a suite of
unit tests that use a particular blob through out the
tests.
This simplifies the contents of particular UTs,
and brings forward focus of each UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib7d69b90fcbe8e6a0ba303475fcbaeb90fa110a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests were only closing a blob,
without deleting it at the end of unit tests.
This is valid behaviour, but to later simplify
the setup/cleanup - a delete blob was added.
This change was made to unit tests where,
it was not focus of particular UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e338ba6fcb63af26658e8968971a6d56f70807b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1203
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Operation of closing and deleting a blob is common
throughout the tests.
This patch creates helper function ut_blob_close_and_delete(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is closed and deleted, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic56594da8cd4c442b62890d62961b44771059679
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Operation of creating a blob (with or w/o opts),
then opening it through out the tests is quite common.
This patch creates helper function ut_blob_create_and_open(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is created and opened, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia541b855d154503f824bfa3909bcfeac649c5853
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Always call API on blobid that was received from blob
create, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3529b4d5e86c1301bb64268029a57873f9f600cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Always call API on pointer that was received from blob
open, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I15531111201d071c471f5be79ce18ff508631677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A lot of unit tests require only creation of a blobstore
then unload it at the end.
This code can be made common and invoked automatically by
CUnit with CU_add_suite_with_setup_and_teardown().
Those functions are called before and after each test in suite.
This should simplify the unit tests by removing the common
code.
Following patches will add further suites with different
setup/cleanup to reduce common code even more.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I984cde2381f4461e188e06050355024a88ebfca9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Next patch in series adds setup/cleanup functions
that use g_bs for its operation.
Particular unit tests should not leave the g_bs
unassigned, if cleanup is supposed to unload it.
It applies to helper functions to reload/dirty_load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6e022b6c762981c2c70ebf31f4981a17f54f3591
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests initalized bs opts,
event if they were left unmodified.
There is no need to perform this operation,
as spdk_bs_init() can accept NULL as bs_opts parameter
to just initialize default values.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iacea1fa9d53796b8c359b611092cc63c6bce4094
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds better check if the xattr was removed.
It will identify potential bugs when first md sync
takes precedence over the second md sync.
As per suggestion in
https://review.spdk.io/gerrit/c/spdk/spdk/+/774/6/test/unit/lib/blob/blob.c/blob_ut.c#7655
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I463f2455614ef11cc1512dc2fb1972ba1f024337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of dirty shutdown of blobstore and reloading
it occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_dirty_load() to facilitate this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0079dfabd64eaec6495db02fe200be1d6116f0c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of unloading and loading blobstore
occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_reload() to facilitate this.
Couple occurences in this patch actually fix
test cases where mistakenly opts were not passed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib46ed395cd134feaa540e00a334ae861872b3ef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Couple unit tests were still refering to g_bs pointer,
rather than the one local to particular UT.
This patch fixes this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If343eb561a48c4547d499139d76e1db6b2d7f3bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
