This object will be aggregated by the upper layer object nvme_bdev.
Hence based on the new naming rule, rename nvme_bdev_ns by nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I96a70213b29fb53437acd080a0787ec9f5a6759a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will name the lower level objects starting with nvme_* and the
upper level objects starting with nvme_bdev_*.
This object is a channel per ctrlr and another new channel will be
added on top of this object.
Rename nvme_io_path by nvme_ctrlr_channel based on the new naming rule.
nvme_io_path will be used for a new object which is used to find an
optimal I/O path and to reset multiple ctrlrs sequentially when
multipath is supported.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1d4fa6d4625de3413d629a1ff412e00de12dfaf4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Related to #1950
In the issue, CPU idle time measured from /proc/stats make it
seem like no reactor goes idle.
If true, then it would help for debugging to check stats from reactors.
Their busy/idle time and number of threads on them.
This patch reorders the checks in interrupt test,
to first show reactor stats, then confirm with idle time from
/proc/stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia1770833828ef688110473e45ed5998d213059f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8223
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
So far the test application was mostly used for cases with
single active thread on a core.
Setting activity as percentage of all poller operations worked
fine for those cases.
This patch changes the thread activity to mean percentage of
a set time period.
Which equals to the maximum load a thread will see when being
alone on the core.
Right now g_core_time_period is set to 100ms, and is the
maximum execution time for all threads on a core when
thread activity is set to 100%.
g_timeslice is set to 100us and is the execution time of
single thread poll.
Consider following scenario:
Before the patch
Thread1 Activity 70% Busy 70 Idle 30 Load 70%
Thread2 Activity 60% Busy 60 Idle 40 Load 60%
Core Busy 130 Idle 70 Load 65%
After the patch
Thread1 Activity 70% Busy 100 Idle 0 Load 100%
Thread2 Activity 60% Busy 100 Idle 0 Load 100%
Core Busy 200 Idle 0 Load 100%
Additionally increased period of sleeping from 1us to 100us,
to offset the time needed for additional operations
during thread poll.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I027432db1bea570dd58829eeccf7dd8bb06bf249
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7474
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In cases when all cores are already doing too much work
to fit a thread, active threads should still be balanced
over all cores.
When current core is overloaded, place the thread
on another that is less busy.
The core limit is set to 95% to catch only ones that are
fully busy.
Decreasing that value would make spreading out the threads
move aggressive.
Changed thread load in one of the unit tests to reflect the
95% limit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3b3bc5f7fbd22725441fa811d61446950000cc46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8113
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems to be needed for devstack pieced together out of the
current master branch (wallaby seems to work fine as is).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5abf22a606c84c120e42819a5450ba82d1bc52b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe specification defines namespace identification descriptors i.e.
EUI64, NGUID, UUID.
BDEV abstracts NVMe specific details that is why only UUID is exposed,
however if NGUID is supported it is prefered to identify namespace
with NGUID over UUID.
If NGUID is not supported by NVMe Controller then fallback to UUID.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51889a3664c0daa7cbe983048231793e3c502e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed warnings produced by gcc-11:
compress_ut.c: In function ‘test_compress_operation’:
compress_ut.c:726:9: warning: ‘_get_mbuf_array’ accessing 32 bytes in a region of size 24 [-Wstringop-overflow=]
726 | _get_mbuf_array(exp_src_mbuf, &g_expected_src_mbufs[0], SPDK_COUNTOF(exp_src_mbuf), false);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compress_ut.c:726:9: note: referencing argument 1 of type ‘struct rte_mbuf **’
compress_ut.c:430:1: note: in a call to function ‘_get_mbuf_array’
430 | _get_mbuf_array(struct rte_mbuf *mbuf_array[UT_MBUFS_PER_OP_BOUND_TEST],
| ^~~~~~~~~~~~~~~
Fixes issue #2013.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04d0182169e61e87401f93f56993168d7aa42e43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
check if the thread is moved to the main core after it becomes idle.
Change-Id: I3ee38ee16d755cc9dea5fa10d9f8ba42507408ff
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7853
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This update will allow us to use spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() easier to aggregate multiple detachments.
Previously, we could do:
spdk_nvme_detach_async()
spdk_nvme_detach_async()
spdk_nvme_detach_async()
and then started doing spdk_nvme_detach_poll_async().
Hence aggregating multiple detachments is already supported.
After this patch, the following sequence is possible:
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = 0
The actual changes is to remove the variable polling_started from
struct spdk_nvme_detach_ctx because it is not necessary anymore.
Clarify this change via updating the header file and CHANGELOG.
Verify this change by unit test.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebdf6c27c5304a2097b7084c315ccc99634ffa1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2268: Avoid x-prefix in comparisons as it no longer serves a purpose
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ica5ddfa8c39f34741c7344906abe802ff7451b1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8505
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2251: This ! is not on a condition and skips errexit.
Use && exit 1 instead, or make sure $? is checked.
This is critical since our test suites heavily depend on errexit
to catch all abnormal conditions. Replace ! foo ... with a call to
NOT() wherever possible. For the test/ocf pieces, use [[ ]] instead
to define the condition for the existance of the ocf bdev.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ied3f99b9f1dc0594e4aef64fc21e51498f19ac23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are currently prone to false-positives especially in terms of
scoping. Consider the following:
foo() {
local bar=(42)
echo "${bar[*]}"
}
bar=43
foo
echo "$bar"
Some versions of shellcheck, including the latest, 0.7.2, complain
about $bar being reused as a plain string here. This is incorrect
since foo() holds its own copy of bar[@] hence the assignment which
takes place outside of it doesn't affect its content.
SC2178 can be mitigated be reversing the order of declaration:
bar=43
foo() { ... }
...
but the SC2128 still remains.
Currently, in our code majority of these warnings are coming from
false-positives due to initial source'ing which most of our test
scripts do (e.g. they fetch a function where local bar=() is used
and in the test itself $bar happens to be assigned a plain string.
This is still valid code).
To mitigate, disable these directives untill shellcheck is capable
of properly interpreting scoping when checking them.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifbde973eae6e261d79e1c340eb28644bce5f4e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2269: This variable is assigned to itself, so the assignment does
nothing.
Since the --id check doesn't change the value of $id, remove it
completely. This simplifies the process_shm() so the --id type is
considered to a be default and $id changed only in case --pid was
explicitly requested.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If8a4a43c6822fa1b32217a0b783cb96d0fee2644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The latest Linux NVMe host (e.g. Linux kernel 5.12) have improved
the quality of multipath but still has an issue such that ANA state
is observed to be invalid even after connection is successfully
created.
By code inspection and system test, initializing ANA state may be
delayed even after connection is successfully created.
We can insert a short sleep but it will be better to retry checking
with timeout. The created function check_ana_state() is applied to
the remaining cases.
This fixes the part of the issue #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc4eaef7c702d961caeee5bcdc9e6eab4704fc5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously core load was only considered for main lcore.
Other cores were used based on cpumask only.
Once an active thread was placed on core it remained there
until idle. If _get_next_target_core() looped around,
the core might receive another active thread.
This patch makes the core load matter for placement of any thread.
As of this patch if no core can fit a thread it will remain there.
Later in the series least busy core will be used to balance
threads when every core is already busy.
Modified the functional test that depended on always selecting
consecutive core, even if 'current' one fit the bill.
Later in the series the round robin logic for core selection
is removed all together.
Fixed typo in test while here.
Note: _can_core_fit_thread() intentionally does not check
core->interrupt_mode and uses tsc. That flag is only updated
at the end of balancing right now. Meanwhile tsc is updated
one first thread moved to the core, so it is no longer
considered in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I95f58c94e3f5ae8a468723d1dd6e53b0e417dcc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8069
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Intention was for the threads to contain a single
core in the cpu mask.
This patch fixes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8276cc906be53a7f8195d61c63bfa54bd2647b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8068
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is relevant mostly for the VMs. Allocating that much memory puts
a lot of pressure on remaining pieces of the system as currently we
allocate total of 12GB memory per VM instance in the CI pool. Default of
4GB hp should be enough to cover majority of the tests hence if there's
any suite that requires more memory, setup.sh should be called there
directly with an optimal value.
This is done to make sure we can accomodate proper resources in the CI
by knowing what are the actual requirements rather than just blindly
allocating "as much as possible".
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie958c518c7ed702b068c7fc9042183fdf41aa816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: I5120baff8d2de3ef639d7b3c66d51002838c3f3c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reference count of nvme_bdev_ctrlr will be used to update ANA log
page safely, and nvme_bdev_ctrlr_destruct() can be used to decrement
reference count after completing ANA log page update.
However, nvme_bdev_ctrlr_destruct() is not a good name for this case.
Furthermore, nvme_bdev_ctrlr_destruct() does not set the destruct flag
to true, and the next patch will need nvme_bdev_ctrlr_acquire().
Hence rename nvme_bdev_ctrlr_destruct() by nvme_bdev_ctrlr_release().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I285b7ab0963d0f4ea4a7a9fd29bd026d37ba8460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8334
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Consolidate populate_namespaces_cb() calls for error cases into
connect_attach_cb(). Then remove ctx parameter from
bdev_nvme_add_secondary_trid() because it is not necessary now.
The next patch will inline _nvme_bdev_ctrlr_create() into
nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94f456df160c1cc874acac4c70aad27102cb0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps ensure that not only is the bdev available,
but that it has been fully examined by any upper
layer bdev modules before returning from this
waitforbdev function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7b69bb35199c08a4ccaa9c7ea9429d82b16ac46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvmf_ctrlr_get_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
Change-Id: Ie6415a6bd2327419fe4b32f21ac814fd827c9e95
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7970
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This mutex is not used anywhere. After removing mutex from struct
spdk_scsi_globals, struct spdk_scsi_globals is empty. Hence then
remove struct spdk_scsi_globals. We can create struct spdk_scsi_globals
again if it becomes necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I749ae43f7735a7c9383d090eae2093bb52607f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add three parameters, pdu_pool_size, immediate_data_pool_size, and
data_out_pool_size to the RPC iscsi_set_options to run iSCSI target
with little memory.
For some use cases, we want to keep the max number of connections,
but simultaneously we want to reduce the pool size and let I/Os wait
until resource is provided.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74dc785310b1d985f3e338c1e13fba3a3840d113
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Id5690eb2ad501eaacb4b266981b4dba128a7b174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8340
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This would make easier for the 3rd party tooling to adjust env for
the install_* routines.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5ea447bc67080f106cc43e005143bd52e91c768
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Source Windows specific definitions from common.sh. These adjust
uname to report the operating system as WSL, Msys or Cygwin and the
kernel name as Windows. They also define kill() to invoke the SIGTERM
handler before causing a hard stop with TerminateProcess.
Adjust the ordering of the 'source' commands in autotest_common.sh so
that the config definitions are available when common.sh is loaded.
Define MAKE, MAKEFLAGS and HUGEMEM for Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I130b892ee55c925a0b033bda271a29133993afb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was added only for testing purposes. Right now it just
unnecessarily makes the build logs bigger and spams the stdout.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id8ff3e1dfde955dc118e0a202897d6c6634c3995
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8194
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 2246a93718.
We are seeing a lot of failure on io_device lookup in the test
pool. These only showed up after this patch was merged and sees
the most likely culprit. Reverting this patch for now while we
continue debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ab098319dfae3a5356eb4fe0dbf9f4af2d2eea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8199
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case IFS was modified in the environment where print_backtrace()
was called, it could impact the cmd substitution used for seq'ing
the main FUNCNAME loop. Example:
========== Backtrace start: ==========
/home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh: line 980: 1
2
3
4: syntax error in expression (error token is "2
3
4")
Avoid that by resetting the IFS to its default value, but also,
replace said $() with arithmetic evaluation to avoid it altogether.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4ab098319dfae3a5356eb4fe0dbf9f4af2d2eea6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This should be vfio-user-master now. vfio-user-v0.6
branch is obsolete.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iaa0b429c4de13c59e1f58fe59149367f941d42f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8062
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ib3bd382bbeb610503194e7d7bfd569f60a0d0121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7894
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I696870dbdc9fa654e270d9fe76f12b7044455527
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7946
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider this:
foo() { echo bar >&2 ; }
set -x
foobar=$(foo 2>&1)
[[ $foobar == "bar" ]]
The above test will fail since $foobar will also include tracing
strings as stderr is where set -x redirects the output. Since in
some cases this may troublesome, replace stderr with a dedicated
fd allocated dynamically.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia6609e4463b371c07fab42d2bd291c9e43742df5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8158
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function was unintentionally including trace lines in its output
by playing with stderr (where -x is redirecting its output by default).
Avoid that by simply listing the devices and doing proper checks from
within the actual test.
Spotted in https://github.com/spdk/spdk/issues/1973
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If15375aca152aaa49267c9cc51e70fd859685ea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
After commit a31e319f "nvme: init discovery ctrlr using nvme_ctrlr_process_init"
SPDK will not initialize vfio-user subsystem if we didn't specify it
in the command line, so add this parameter as other transports already use it.
Change-Id: I5331459e9a88d8d94fa8b6ce693e086516b9f0bc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, move ocf build outside the autobuild suite to make sure
scanbuild also picks up all the pieces.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5f0de407cc55b1dc153cc856f68e053a54fc0682
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6841
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If the -Z option has been specified bdevperf checks that the bdev
module supports ZCOPY.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I0bebad68090f48a1b1250afe4bc4c752c2061bfb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7352
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Purpose: Let the users know the current available registered Rados
cluster and the related info.
Change-Id: I115c129ae6e4b0372579aad168fd88f8be136357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7990
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
512 and 1024 number of hugpages is not a sensible value in case 1G
hugepages are in use. Instead of setting fixed number of hugepages,
determine it safely based on the default size and allocate 1GB for
node0, 2GB for node1 (if present).
Fixes: #1954
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I850ba877332527a68ec4ddf7408fcc183835cda6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
