This is more adequate name, since this value if first read from
Extent Table descriptor. Then decreased when iterating over entries in
extent table and extent pages are read.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib188c524b8488b38d4de063a9970dcfdf49c9acd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482600
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Right now output from _spdk_bs_cluster_to_extent_page()
is used to determine whether the exten_table is used at all.
If NULL pointer was returned this meant that extent table
was not allocated, even if the code might suggest just
checking if we overran the array.
To make it more obvious, the _spdk_bs_cluster_to_extent_page()
now only asserts the extent_table_id.
blob->use_extent_table is now always used to determine the
serialization path.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9d2630645213539bae5cd1d72e5f9b878f53c2bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482599
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Force number of Extents to fit into Extent Page to
be power of 2, in order to simplify calculations
on cluster allocations.
At this time SPDK_BS_PAGE_SIZE is 4k, which would
results in SPDK_EXTENTS_PER_EP to be 512.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e09d92b00dfe5c12d7dd10ac0fc5a9a10d526ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Similar to EXTENT_RLE, this descriptor holds LBA of clusters.
Difference is that EXTENT is kept in separate md pages,
and only single EXTENT will be updated on cluster allocation.
This patch adds the EXTENT processing, which is not used
until following patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifbac23db7ca3e7c8c91cee01018f20071f0d5160
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3e49c398d9bdf9f4eacba65061cc7fe4b300fb56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this patch extent pages array will change it size accordingly
to size of the blob. Similar to clusters, only resizing up
is done on blob resize. Shrinking is done on persisting the blob.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id7f7c81efbd96af414fce9fc4045cbb476cc93a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Added new descriptor SPDK_MD_DESCRIPTOR_TYPE_EXTENT_TABLE.
Extent Table will hold md page offsets for new Extent Page descriptor.
Entries in Extent Table are run-length encoded 0's as unallocated
Extent Page descriptors.
Additionally total number of clusters is persisted in each Extent
Table descriptor. This is because there is no guarantee that
last Extent Page of a blob will be allocated.
Even if number of Extents per Extent Page is always the same,
Extent Page can hold less Extents than that.
This patch does not add more metadata on disk right now.
Only added descriptor parsing/serialization and applicable fields
to store it in run time.
Following patches are going to implement TODO's added in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac5d8f00ddfc655c507bc26d69d7adf8495074e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466920
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since further patches will be adding new descriptors
that are related to cluster layout throughout the blobstore,
add description for existing descriptor too.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I722eb633445685789d5185ed59dfc910f76b109f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an additional option that can be passed when creating
a blob.
When opts->enable_extent_pages is set to false (current default),
only EXTENT_RLE should be persisted on sync.
During blob load, when EXTENT_RLE is present in md,
blob->extent_rle_found is set to true.
When opts->enable_extent_pages is set to true,
only EXTENT_TABLE and EXTENT_PAGES should be persisted on sync.
During blob load, when EXTENT_TABLE is present in md,
blob->extent_table_found is set to true.
It is possible to find neither EXTENT_* descriptor when loading a blob.
This means that blob length is 0 and EXTENT_RLE was supposed to be used.
Yet none were persisted due to lack of clusters.
In such case blob->use_extent_table is set to true after finishing
blob load.
When parsing metadata ends, if extent_table_found is set - then
support for extent_table is enabled. All other cases disable it.
At this time path for Extent Pages is not implemented, so it should
not be used.
Later in the series, it will become the default path for serialization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2146da6130a0645e686ab02a3b5d2d86a7d35a1f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479853
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Accept a clear method option on blob create by adding clear_method
to the opts structure passed in to _spdk_bs_create_blob(). Store
these 2 bits in md_ro_flags so that earlier versions without an
understanding of these bits can not alter metadata.
The new metadata values will be used later in the series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5440645ca20b426778d13b2e544b65dc2b3b83c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The _spdk_bs_page_to_lba() [without 'md'] is only for translating the
pages on the blobstore to lba they are at. Those pages start at
the begining of the device and cover all of it. Thus simple
math is enough to translate those.
It is used to calculate lba_count for set of pages as well.
Meanwhile there are 'md_pages' which are the same pages as for
the above, but their count start at bs->md_start.
Which is right after super_block and couple pages for bit masks.
This patch creates new _spdk_bs_md_page_to_lba() that is more
explicit in what page number is passed. Hopefully avoiding
confusion when reading which page number refers to which
'type' of page.
Exception to the that is _spdk_bs_dump_read_md_page(), where
blobstore is not actually loaded (md_start from super block
is not copied to bs structure).
Additionaly providing assert to catch errors on debug builds.
Making the check in _spdk_blob_load_cpl() for max_md_lba obsolete.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I66bbca55b5ca3d6794c462d50177e6037ddbefa6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479017
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In future patches new type of extents will be added,
for compatibility the current extent type will be still
handled in the code.
To signify the difference between those two types,
current type is renamed to SPDK_MD_DESCRIPTOR_TYPE_EXTENT_RLE.
Along with any variables throughout the code,
to make it clear which ones are used.
There are no functional changes in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7186ccc452d200036188abf1dcea9660dcedee72
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Length of xattr descriptor is equal to length of xattr struct,
xattr name and the len of stored value.
There is no limit to how much can be stored in memory for xattr.
On disk xattr size is limited to single page and within that to
max descriptors that can fit in it.
This size is known at compile time.
Before this patch it was possible to add xattr exceeding
what was possible to be written to disk. This caused issues
when serializing the metadata during spdk_blob_sync_md()
or spdk_blob_close(). Making those fail without specific info
to the user and not actually writting such descriptor.
Since maximum length of xattr descriptor is known at compile time,
this patch compares against this value when setting the xattr.
It will immediately report back to user with error, and will
not store xattr in memory (thus not serialize it).
This patch should not affect any backward compatibility for blobs.
Too large xattrs weren't written to disk before,
API for blobstore stays the same - only reporting ENOMEM
when it should.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f4af4d079e47f084e20d7a4969d9a78ec1f8610
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In some cases user may want to flag blob for removal
then do some operations (before removing it) and while
it happens there might be power failure. In such cases
we should remove this blob on next blobstore load.
Example of such usage is delete snapshot functionality
that will be introduced in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I85f396b73762d2665ba8aec62528bb224acace74
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a part of future changes to block blob operations
that may cause race conditions between each other.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia728d1fc207375ddcb3b70b5081ddcffa9f99027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I994b5d46faffd34430cb39e66225929c4cba90ba
Reviewed-on: https://review.gerrithub.io/414935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It will save the space of spdk_xattr when put uint16_t after
uint32_t
Change-Id: Ie0712d8c3b16d90fc354847509fd87e1ffd93916
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419453
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Save the original size of the disk to metadata when it is first created.
On load verify that the disk did not change size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I535940ee188425ee3b394effd99653cc073d541e
Reviewed-on: https://review.gerrithub.io/410896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
4KiB page size * UINT32_MAX = 16TiB - so we must use
a uint64_t for any blobstores on backing devices of
16TiB or greater.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief13cf06d413477dc8ab4f9fe0ff4c0631566c00
Reviewed-on: https://review.gerrithub.io/416448
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure we don't truncate the LBA when using it to serialize the
cluster array into an extent list.
We also need to add an explicit cast in _spdk_bs_cluster_to_lba
to ensure the conversion doesn't get truncated. While here, do
the same cast for _spdk_bs_cluster_to_page.
Change-Id: If4e65ed86550e39dfa39826930dfafac158d519c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/416231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I23c34d4dcb542aa9ab3fa8cb734cf9cc0e0fc5da
Reviewed-on: https://review.gerrithub.io/409144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I6182eb3a77d23db7088703492d71349e3a4b6460
Reviewed-on: https://review.gerrithub.io/399366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This commit provides an API to obtain an information about
snapshot and clone relations.
The main objective is:
1) Determinate if we can delete snapshot (if have some created
clones),
2) Provide an information about parent/children nodes to the upper
layer (e.g. lvol)
Realization:
1) Structure parent-children is stored in the blob store object
and updated on:
a) blob store load,
b) blob create/delete,
2) Full information about parent-children is provided via new API:
spdk_blob_get_parent() and spdk_blob_get_children(),
Note:
While we don't store an information about these relations in the
blob store, we need to open all blobs on blob store load to create
it. It should be considered that it have an impact on the blobstore
loading performance.
Change-Id: Ie0237fa5b93af01aa73d1f68ac1694e653fb75e5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces API to get some blobs capabilites:
bool spdk_blob_is_read_only(struct spdk_blob *blob);
bool spdk_blob_is_thin_provisioned(struct spdk_blob *blob);
to be used in upper level in the unified way.
Change-Id: I4411bb3f4dd0c64826ae16a66141b2911cbaab79
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405022
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds new feature of blobstore.
New call creates a read-only snapshot of specified blob with provided options.
NOTE:
This patch doesn't cover recovery operation if snapshotting fails. This operation
will be implemented and added later.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: I470ca13525638fa6df485d508b3adf71b6b69c0b
Reviewed-on: https://review.gerrithub.io/393935
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
BlobFS shutdown path needs to be investigated more with these
changes.
This reverts commit a137b9afd0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b04b24e178945d62db20668b9e500f278ae955b
Reviewed-on: https://review.gerrithub.io/403600
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For any given blob, if an spdk_blob_sync_md() operation
is already in progress, queue additional spdk_blob_sync_md()
operations until the previous one completes.
This ensures proper ordering of writing metadata to
disk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2051e8cb5b8d1a033ec1238cb4811232110aa0f4
Reviewed-on: https://review.gerrithub.io/401257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895
and reverted in 0847f27b54.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change wasn't correctly rebased and needs to be updated to compile
against the current blobstore.
This reverts commit c1174e6895.
Change-Id: I529608bee7323cb626d8c36dff15adc9ba24ad26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All metadata operations are now done on the metadata
thread, so we no longer have to worry about one thread
updating in-memory metadata structures while another
thread is transferring the in-memory structures to
on-disk structures.
This does not protect against multiple sync operations
outstanding at once - that will be coming in an
upcoming path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf33edf4d41d867c96a38df017737e9ceb87fa58
Reviewed-on: https://review.gerrithub.io/401056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I277f7288427788e7a107b143331753fd5b23f16f
Reviewed-on: https://review.gerrithub.io/396571
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3c7d2096f549a88b4a9884c0026d15d3bcd8dc67
Reviewed-on: https://review.gerrithub.io/396387
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc9609ad36188006e9454e5c799bccd8a92d7991
Reviewed-on: https://review.gerrithub.io/391422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be useful for backing thin provisioned
blobs in the future.
Change-Id: I78cf8cda39e8dff42da69b79ed460797d7494af1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397043
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, use this to add some assert() calls to ensure
per-blob metadata operations are only called from the
thread that initialized/loaded the blobstore.
Upcoming patches will utilize this for metadata updates
required due to cluster allocations on thin provisioned
blobs. In that case, the cluster allocations may not
always be done on the metadata thread - but we want
the metadata thread to actually do the metadata sync
operation to guard against races from allocations on
multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa0adfe8b7e61ba770449d1e076126ecb9d7a556
Reviewed-on: https://review.gerrithub.io/396712
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This allows a channel's request_set resources to be
used for queuing I/O requests. This is needed
for upcoming thin provisioning functionality,
where we must queue I/O requests that need to
allocate a cluster, if another cluster allocation
is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie8d3e799afc0b56bc95ba5ecab11253d8bc8608f
Reviewed-on: https://review.gerrithub.io/395037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib3470fbac49e92308ed14e20ccde6655354f2580
Reviewed-on: https://review.gerrithub.io/389577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to make the channel operations numbers configurable for blob.
Reason: for iSCSI tests, if there is one CPU core, there will be only
one channel, thus read stress tests would
fail since we need more operations for blob channel.
Select a value equal to the small buffer size(8192) for
bdev layer, thus we can solve the iSCSI read issue
correctly. Since for bdev read, we currently only
allow 8192 active bdev I/o requests, so this solution should
work.
PS: Current solution is still not perfect, I think the very
precise fix is that we need to restrict sending I/Os
to the blob, if there is no channel operations. Though
current code, we have retry I/O in bdev , but it still fails
the iSCSI high pressure test.
Change-Id: I211f7a89d144af2c96ad4cc1bd7ac8e94adc72e7
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ibffb43e39b44e5f443d3dfbfa5b5d7dcac3243ef
Reviewed-on: https://review.gerrithub.io/391182
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the metadata channel, and instead use the same
channel for metadata and data operations on the metadata
thread.
This prepares for future changes which will allow
for metadata operations on any thread - not just the
thread where spdk_bs_load() or spdk_bs_init() was
called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b11a58fcb237a9a7603841d118b3729d83c6c98
Reviewed-on: https://review.gerrithub.io/391311
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moving forward, the spdk_blob returned to users will
actually be an I/O channel - not the blob structure
itself. So rename the existing spdk_blob to spdk_blob_data.
spdk_blob_data will continue to contain global state for
the blob. In the future spdk_blob will point to an
I/O channel for the blob - for now it effectively still
points to the spdk_blob_data, but by changing the
structure names here it will reduce the code churn in
future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d0cbc0553f68f96c24173c833091a80d058eb89
Reviewed-on: https://review.gerrithub.io/390900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
