By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_tcp_req_complete_safe caches values on
the request, so that we can free the request *before*
completing it. This allows the recently completed
req to get reused in full queue depth workloads, if
the callback function submits a new I/O.
So do this nvme_tcp_req_complete as well, to make
all of the completion paths identical. The paths
that were calling nvme_tcp_req_complete previously
are all non-fast-path, so the extra overhead is
not important.
This allows us to call nvme_tcp_req_complete from
nvme_tcp_req_complete_safe to reduce code duplication,
so do that in this patch as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I876cea5ea20aba8ccc57d179e63546a463a87b35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
All callers of nvme_tcp_req_complete call
nvme_tcp_req_put immediately afterwards, so move
this call into nvme_tcp_req_complete.
This will help enable some improvements in later
patches.
Note that nvme_tcp_req_complete_safe has this same
functionality open coded right now, but that will
get changed in the next patch. It calls
nvme_tcp_req_put immediately after the TAILQ_REMOVE,
so do that in nvme_tcp_req_complete as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I368122bc49a7f0772e3011e5427e3c43618380eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
QEMU may exit due to some exceptions which mean the socket
connection may be disconnected at any time, so for asynchronous
callbacks especially the subsystem pause/resume callbacks, they
all run in asynchronous way, the controller pointer may become
invalid before the callbacks are called.
Fix#2530.
Change-Id: I6d73597d75761e28844e83bfee7f8a446d85fa49
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK was previously incorrectly requesting log levels such as
LOG_NOTICE. Update libvfio-user so it is in fact supported, and check
that setting up the callback actually worked.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I41c2a8cf683868c3c2e40470f78e1af3dba29de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12839
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Update libvfio-user such that the SGL access APIs can be used
concurrently. We are guaranteed that the guest memory remains mappable
now that the vfio-user transport has implemented quiescence.
This is currently only really useful (for a single controller) in poll
mode, but shouldn't break interrupt mode, as we still ensure all a
controller's queues are on the same poll group in that case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0988e731558e9bf63992026afc53abc66ec2a706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12349
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
the underlying spdk_cpuset_copy() takes `const spdk_cpuset*` as the
`src` parameter. there is no need to take non-const spdk_cpuset*.
hence, in this change, let's relax the requirement of the pointer type.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: I1f626c7fea45cf7250bf56b891bcba4a0f2a8917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13443
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We had not incremented ctrlr->outstanding_aborts when aborting a
request in the ctrlr->queued_aborts, and ctrlr->outstanding_aborts
became negative. Fix the bug in this patch. Additionally add assert
to check if ctrlr->outstanding_aborts is not negative.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I58090286f070ba854bdea87f0f8ecb7810890338
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13452
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
While we are quiesced, we're not allowed to access guest memory via the
SGL APIs. Refuse to process any commands unless we're in RUNNING state.
We need to synchronize with each poll group via a message before we can
call vfu_device_quiesced(), otherwise we could still be processing
commands via nvmf_vfio_user_sq_poll().
For interrupt mode, we then might miss processing commands in a
corresponding interrupt callback, so make sure we process them when we
return to RUNNING state.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ieae5a9ae8d9de722e0bdf4bb8d61e7e678159f1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12912
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
An oversight meant that quiesce was in fact only pausing the admin
queue, and not ensuring no I/O was ongoing. Fix this by passing the
right flag to spdk_nvmf_subsystem_pause().
Change-Id: I930c616d1170ac0299339b04928da57f6a7489ab
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the broadcast NSID is supplied, every namespace is paused.
Change-Id: I40cc3e04b5a75b731ab0c8946ed8146275cc8ee4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13394
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Profiling data showed the deference of the CQ head in cq_is_full() was a
significant contributor to the CPU cost of post_completion(). Use the
cached ->last_head value instead of a doorbell read every time.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib8c92ce4fa79683950555d7b0c235449e457b844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fully asynchronous ctrlr detach (b6ecc3729) introduce a register
operation state machine that waits for operation to complete. When
controller failed to initialize, `nvme_ctrlr_fail` set qpair state to
`DISCONNECTED` immediately, causing qpair process completions to
never complete register operations therefore prevent async detach exit.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I205c5157b8ea7b4535f98ff4052414310e421446
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12858
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reactor_run() decides whether to start gather_metrics
based on non-zero scheduler period.
The default of 1 sec was set during initialization,
in scheduler_subsystem_init().
This resulted in unessecary operations each second,
even if only 'static' scheduler is used.
This patch moves setting default scheduling period to
respective schedulers.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I953aee271a959b6314c8e83434c922dba9638de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
When calculating the bar_addr which is used to access SPARSE MMAP area, we should use the
(offset - region->mmaps[i].offset) as the increment to get the valid access address.
Signed-off-by: Jun Zeng <jun1.zeng@intel.com>
Change-Id: Ie5d0c63cf572847d15dc92f0995fddecf35f1cdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13021
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rte_power was added to DPDK long time ago,
but some of the DPDK packages do not include it.
For those cases just skip building components that depend on in.
This change still allows to use dynamic scheduler, since
the dpdk_governor usage is optional.
Fixes#2534
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ied88edc8d58aae07d1384c1c40203fc80b919d80
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12993
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dpdk_governor and gscheduler use rte_power,
which is only available on Linux and when
DPDK env is used.
Rather than repeat those checks in each mk or Makefile,
added DPDK_POWER flag directly to DPDK env.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I438caad8d333a4df697a79aa45de2930cce71d23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12992
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_net is a dependency for both rte_vhost and rte_power.
Next patch will simplify the checks to include rte_power,
and keeping this depenency next to component that directly
depends on it will make it easier to understand.
Since DPDK_LIB_LIST is sorted by the end of the env.mk,
it shouldn't be a problem to include the rte_net twice.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If2bb2aa5d972148ca8143023657b0aec45306a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12991
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When running perf test, sometimes after CONNECT req's resp was
received and processed, the qpair still failed to change from state
CONNECTING to CONNECTED. For when it goes to nvme_fabric_qpair_connect_poll
-> nvme_wait_for_completion_robust_lock_timeout_poll to process the
CONNECT req's resp, the req may have not been finished in sock_check_zcopy,
although its resp has been received and processed, which means the
tcp_req->ordering.bits.send_ack is still 0 and the status->done still
is false. And after the req is completed in sock_check_zcopy, we need
to poll this qpair again to make the state enter CONNECTED.
And if icreq's resp received and processed before nvme_tcp_send_icreq_complete
is called by _sock_check_zcopy, the qpair will be stuck in CONNECTING
and it never proceed to send the CONNECT req. We also need to put it
in pgroup->needs_poll to fix it.
I can reproduce this bug with the following configuration.
target: 16NVMe SSD, running on 20 cores;
initiator: randread test using nvme perf with 32 cpu cores and
zerocopy enabled.
The error doesn't always occur. CONNECT failure is about 1 failure in
ten with the following log. And icreq failure is less frequent with
only target side's "keep alive timeout" log.
Error reported in initiator side:
Initialization complete. Launching workers.
[2022-05-23 14:51:07.286794] nvme_qpair.c: 760:spdk_nvme_qpair_process_completions:
*ERROR*: CQ transport error -6 (No such device or address) on qpair id 2
ERROR: unable to connect I/O qpair.
ERROR: init_ns_worker_ctx() failed
And target side shows:
Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout
Change-Id: Id72c2ffd615ab73c5fc67d36c3ff8b730cebcef7
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12975
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Patch below changed the struct spdk_nvmf_ctrlr_data by inserting
spdk_nvme_cdata_fuses. This affects large number of nvmf interfaces.
(cbfd581) nvmf: Add NVMe fused operations to spdk_nvmf_ctrlr_data
Unfortunately was missed due to lack of rebase after ABI update on
CI machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifd06d0ddbefe9ea6c9715adae9881d4606e34b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13013
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Community-CI: Mellanox Build Bot
We already list the libraries with their explicit
pathnames, so the -rpath-link serves no purpose.
Our Makefile was actually specifying this option
without an = sign - i.e:
-Wl,-rpath-link /path/to/lib
On the submitter's system, this resulted in an error:
cc: Missing argument for -Wl,-rpath-link
I have no idea why no one has ever run into this
error, except for this one submitter. But removing
the -rpath-link is the right thing to do here, since it
is not needed - so do that rather than adding the =
sign and continuing to figure out differences in
-Wl option processing on these different systems..
Fixes issue #2540.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6176e55701a5dea5b10bba1ad621250cb5cb51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12984
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add an option to stop nvmf transport advertising support for both the
compare command and the fused compare_and_write operation in vfio_user
transport.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I3900218c0e9884f86a5c8698a030f8106b64f2f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compare command, when not supported natively by the underlying bdev
is emulated by the bdev layer.
Change nvmf ctrlr data to advertise compare command by default.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I88646e6c1a7d7a2829be813ff0241661724bd127
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12918
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fused compare_and_write operation is always advertised by the nvmf
transport.
Add the fuses structure to spdk_nvmf_ctrlr_data to make advertising
fused operation configurable.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I73ee03dc8948f1d250cc0a8f0b8a3bde042a45e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12917
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are a few places we can replace existing license
text with SPDX license identifiers, that did not match
the auto-replacement script in the previous patch.
Make those replacements manually in this patch instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I258720c03bc2153d1c56a8adf6357f224b911c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reflect that we are kicking the entire controller.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If5723a5f485745ef0a2456942b6df1d54133815b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12665
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
This function is really about re-arming all SQs for a poll group;
refactor to reflect this.
This is necessary ground-work before we can support multiple reactors in
vfio_user.c in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I170fae2076fc80e742926cf448973671ac9e3bd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Play it safe and add the same memory barrier in
nvme_pcie_qpair_process_completions() as for ppc64.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Change-Id: I7079b4769d30106387ef4549495a72b7fea6a77a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Prepare for the later patch, and make the later patch code clean
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I12b175c86a5245f38dc76fe2d3918ec4b30a475a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12830
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
If accel_tasks are used up, we should not directly return but give
an another chance to calc it directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I983b65d7dfff0fea3974682e886d2dcf309cd2c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12841
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
For a C2HTermReq PDU, there's no associated tcp_req, so we need to check
it for NULL before dereferencing it.
Also, while here, moved some of the assignments to the declarations to
reduce the number of boilerplate lines.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iac05ef0ba605e2f40d0026ad1b131c28d29f7314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12845
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The timeout poller might still be registered when a qpair is destroyed
if we send C2HTermReq and then destroy the qpair before host terminates
the connection.
Fixes#2527
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I21acc147fdba3aaac66b0c6ed54e155195fe9816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We need to check that the given SQ is active (i.e. is currently mapped
into the process), so make the check the same as that in
poll_group_poll().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibd3babd7520f611f596f3bab15765fa13b4d6b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is better represented under the name vfio_user_ctrlr_intr().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic3fa0fe238fd8ce4930bfd3e34b9dbc1b935aa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12662
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's a non-zero cost to looking up the CQ; only call this function in
the poll path if we need to.
While here, we'll streamline the ctrlr-level check.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6bf123f759fcd856196f6613cb6c7d0219550136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12660
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Rui Chang <rui.chang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This SGL type was missed in the original commit
that added the pretty printing.
Fixes: 4d9ab1e9a1 ("nvme: pretty print dptr")
Reported-by: Ramanjaneya Burugula <burugula@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibc655db4e65009071f39f55f691c94a094cea0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use the conventional huge-pages based spdk allocation scheme for the initiator
data-structures unconditionally.
Change-Id: I5baee7614e3ac9b5497b3d771dfddfbaa7fdf65b
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12687
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I7d3804a84851753992af4a3a37b60dc6de0d22cb
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12780
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ie50c7421f991ad0474edba0e0f339180f7afee00
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Note that without ISAL or IAA a call to compress/decompress
will fail.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id20a08f6e61b9a51fa4a1634a5314e6ca18fa504
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12310
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously an error would have been completed twice.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ief645fc30754433398531c50357876e92804e4b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12789
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Provide an interface to allow the caller to provide a proprely
formatted descriptor.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5c397761f556361040ec962d61169459150b6494
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12703
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ia09368e426a83274d9c7fc90ed8b0391f4d0b67c
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12774
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds virtio_blk abstraction for custom transports,
with the 'vhost_user_blk' first one being used.
Added spdk_virtio_blk_transport_ops describing the nessecary
callbacks to be implemented by each transport.
Please use SPDK_VIRTIO_BLK_TRANSPORT_REGISTER to register the transport.
Transports can use virtio_blk_process_request() to process the
incoming I/O from their queues.
virtio_blk_create_transport RPC was added to create one of the
registered transports, possibly with custom JSON arguments.
Added 'transport' argument to vhost_create_blk_controller RPC,
to specify which transport should create the controller.
By default the vhost_user_blk transport is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9d93a6e0f483796eb56b7174a678e41a6ea4808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I56dbaef56ff793e48441219e07dc6b02dda0b470
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12777
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I33a497fb134320f13606b66ad55fc7b068d011d9
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12716
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I477da05a42ca607fbad4d178aa541726197d7c83
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12775
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And associated RPC to enable.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I06785bcd8b8957293ad41d13bab556fe62f29fd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12765
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Accel module coming in next patch...
Add support for compress and decompress. The low level IDXD
library supports both DSA and IAA hardware. There are separate
modules for DSA and IAA.
accel_perf patch follows.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55014122f6555f80985c11d49a54eddc5d51c337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12292
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In prep for upcoming IAA additions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id89124a3c3d5b1bcfd4d805ff4ee84a2f64f8a4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12767
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc internal IDXD changes needed to support the upcoming addition
of IAA.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Idb180088af545b174ed33a4f8ee113e58640477f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12764
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Intel Analytics Accelerator, this is the start of the patches to
add this support to accel_fw.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7410710697d2947355181616b35cc8ab78bbddfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11985
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for upcoming addition of IAA.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I47c5880aac37da9a38d6af6e52a51cefbfec91b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12762
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for adding IAA support
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7eed173f9f907aa1c010d12db87b8dc27cd7495b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12760
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Generic vhost-blk layer is responsible for opening the bdev
attached to the vhost controller.
This patch adds vhost_user_bdev_event_cb() that is called
for vhost_user backend. This function will be replaced with
a callback to particular virtio-blk transport.
Having this piped through to the transports, allows
to adjust their behavior upon bdev events.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id73f5131b6e57f0354e970d0bce92716ec69985b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12132
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are configuration details that are needed to configure
the virtio device based on spdk_bdev properties.
Please see vhost_blk_get_config() for an example
of vhost_user retrieving properties of bdev such as size
or supported I/O type.
Rather than trying to anticipate every such property,
add vhost_blk_get_bdev() to allow usage of bdev API directly.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I757f96e2fb0861c97b07ce279a7c04c77a2ad11f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12373
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This requires handling vtophys entries that cross page boundaries.
Fixes#2316
Change-Id: I9e9aafc1612bc89375c783bcf91bd04ab523ab9e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12217
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
If compress driver doesn't support SGL input of output
then we need to copy user's buffers into reduce internal
buffers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0c07243a5b668d0e0adcc153e5b573f59c26ab64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12281
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reduce library allocates one big chunk of memory and
then splits it between requests. The problem is that
a chunk of memory assigned to a request may cross huge
page boundary and if compress driver doesn't support
SGL input of output, operation will be failed.
To avoid this problem, align buffer start on 2MiB
and check each chunk of memory if it crosses huge page
boundary.
Fixes issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie730b8ba928f27a43bde1222b6c18d29b797575a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Separate out SCSI and BLK vhost subsystems to later add
virtio_blk transport abstraction.
This allows for further changes to the vhost_blk, not
affecting vhost_scsi.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1ecfeafeb936809a479a43c321e13f75cb3d5ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9539
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
A iterator function nvme_request_add_abort() covers not only a small
I/O request but also children of a large I/O.
However nvme_qpair_abort_queued_reqs_with_cbarg() did not check the
latter. check if cmd_cb_arg matches not only req->cb_arg but also
req->parent_cb_arg.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I015e29b0a8f58920b9a13081330a94f9dd976a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12557
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only 4 bytes or 8 bytes are valid numbers when to access NVMe
registers, add the check here.
Fix issue #2495.
Change-Id: I63b6e16a156f6eba17f397ec9d1a447e6a80b4da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For PCIe transport, we need to stop any activity of the controller
before deleting I/O qpair resource in a controller reset sequence.
However, we set I/O qpairs to failed before disabling a controller.
In the NVMe bdev module, this caused disconnected qpair callback to
delete I/O qpairs before disabling the controller.
Hence, change the code slightly to set I/O qpairs to failed only if
reset is synchronous to keep backward compatibility.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ica71aad0a1dabce45616dfdfff5f11b07131bbd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12736
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The CSTS.SHN is changed only in shutting down the controller,
nvmf library already ensure that all the outstanding IOs will
be flushed before that, so we can remove this check here.
Change-Id: Ib93a256e986b7b2ec1da0fc7992feb3a02c1d657
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
After finishing migration in source VM, the subsystem is in
PAUSED state, the controller is dead for the source VM, we will
destroy the controller when disconnecting socket, but after that,
we should RESUME the subsystem so that it can be ready for the
next new client.
Fix issue #2363.
Change-Id: Icf0999b9085cebe8be4c8783e1a43bb13d4f7987
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The completion callback of `spdk_nvmf_subsystem_resume`
and `spdk_nvmf_subsystem_pause` can run in different
core other than the `vfu_ctx` core, this may lead to
race condition when changing controller's state. Here
we use a thread message to change it in the same thread
context.
Change-Id: I53d139adcca6ff72a3b91a2a931f1239f3271fa9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12558
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches swaps the ordering of destrloying I/O qpairs
and disconnecting a controller for PCIe transport.
prepare_for_reset is a flag for PCIe transport.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3009de9fea089fc93ecf87adba42e85c9a77e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12582
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As described in the previous patches, we need to delete all I/O
SQ/CQs before aborting trackers when disconnecting a controller.
The following patches reorder the operations. This patch changes
adminq disconnection to initiate a Controller Level Reset and
adminq completion processes it if ctrlr->is_disconnecting is true.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I64f06bae2ce8a9127124029fd042db0028198e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Make this a transport-level decision instead. TCP and RDMA do want to
abort, but PCIe cannot because these commands may still be receiving DMA
operations from the device.
Change-Id: I305acddc3819c903eb3217e8f710d4216d0b3931
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11509
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, we did not do any Controller Level Reset when disconnecting
the admin qpair.
However, for PCIe transport, we need to stop any activity of the
controller, i.e., delete all I/O SQ and CQs before
nvme_transport_ctrlr_disconnect_qpair_done() calls
nvme_transport_qpair_abort_reqs() (i.e., nvme_pcie_qpair_abort_trackers()).
Otherwise, some corruption may occur because completed I/Os may still be
in progress on the NVMe device.
Not to change any public API, nvme_pcie_ctrlr_disconnect_qpair() is a
convenient place to initiate a Controller Level Reset because it is
called from spdk_nvme_ctrlr_disconnect(). Then
nvme_pcie_qpair_process_completions() can process it until completion.
However, necessary functions are not accessible from PCIe transport.
This patch adds two helper functions and guards us from some undesirable
behaviors because it was not assumed that nvme_ctrlr_process_init() is
called from the completion context and ends in the middle of transition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3d986e94ba71b83beeff7e75cf92033b5fa6f075
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12559
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a new cluster is added to a thin provisioned blob,
md_page is allocated to update extents in base dev
This memory allocation reduces perfromance, it can
take 250usec - 1 msec on ARM platform.
Since we may have only 1 outstainding cluster
allocation per io_channel, we can preallcoate md_page
on each channel and remove dynamic memory allocation.
With this change blob_write_extent_page() expects
that md_page is given by the caller. Sicne this function
is also used during snapshot deletion, this patch also
updates this process. Now we allocate a single page
and reuse it for each extent in the snapshot.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815a4c8c69bd38d8eff4f45c088e5d05215b9e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12129
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Instead of releasing the batch memory when the batch generates a
completion, instead do it via refcnt. This will allow us to later hold
onto batch memory longer if vectored transactions end up spanning a
batch.
Change-Id: I942d6aa5052029eb0951e51a046dd98943108b94
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12259
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If nbytes is not set, then the desination iovec sent to the underlying
driver has a length of 0.
Change-Id: Ia55f5ece942bd70f32bfdb3bcf02134ba98fca96
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12612
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It simplifies code and removes cast of nvme_qpair
to rdma_qpair
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I363246cf9d8c9cbafd48b26facdb5cc37fdd8e67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When qpair is attached to a poll group, disconnect
process is async - we are waiting for the DISCONNECTED
event from rdmacm to destroy rdma resources. However
the user (nvme_perf) can destroy qpair immediatelly,
so memory allocated for qpair is freed but rdma
resouces are still allocated. That means that we may
receive rdmacm event (DISCONNECTED) for the destroyed qpair,
that leads to use-after-free.
To fix this problem, add a check for internal qpair state
when qpair is destroyed, if disconnect is not finished, then
we forcefully destroy rdma resources.
Fixes issue #2515
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@nvidia.com>
Change-Id: I7bfa53c9f6fe6ed787323a8941f1f2db17ea0c20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12700
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each spdk_vhost_dev_backend is local to either
SCSI or BLK backends, so its not possible to gauge which
backend is used by the vdev on generic vhost layer.
Added a `type` field with matching enums to differentiate
between the two. Later patches will check that field
in vhost.c.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2a95961b9f9b5f070db7b22d44cf5114a24b1067
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12675
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Without this, it does not think there is a driver available.
Change-Id: I0b8b42374e0ed82abb22bf27e0b8907bb03c61f6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12641
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently, when you run vhost user target, no matter if the reactor is
busy or not, spdk_top always shows 100% busy. Fix this by real load
status.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I610a8c2f4e74f46bd56955d31284372c775507ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12647
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These function accept optional spdk_blob_ext_io_opts
structure. If this structure is provided by the user
then readv/writev_ext ops of base dev will be used
in data path
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I370dd43f8c56f5752f7a52d0780bcfe3e3ae2d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11371
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
When snapshot is created, the new blob is loaded and
examined for BLOB_SNAPSHOT xattr in blob_load_backing_dev
function. At this step there is no such xattr, so zeroes
back_bs_dev is created. Later snapshot inherits back_bs_dev
from original blob, so previously created back_bs_dev can
be lost.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I90cc9b02f56598d8c5c7fe00409f571fba0aa91a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11384
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
