For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.
Once again, replace remaining cases in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe bdev module has been refined since the bdev_nvme_apply_firmware
RPC was added. It is enough to open any one NVMe bdev even if one NVMe
controller has multiple namespaces. Hence, let's remove
spdk_bdev_first/next() calls from rpc_bdev_nvme_apply_firmware() rather
than replacing these by spdk_for_each_bdev(). Additionally, not only
spdk_bdev_close() but also spdk_put_io_channel() and
spdk_jsonrpc_send_*_response() should be done on the original thread.
Hence, redirect to the original thread always when a NVMe command is
returned, and rename firm_ctx->thread by firm_ctx->orig_thread for
clarification. orig_thread will be better than comment.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I90b1986584b3926980fd265e4fded194eb5a2d00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16541
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is enough to embed an instance of rpc_apply_firmware structure into
firmware_update_info structure.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I41a480a0b8cd56f4b537512d5f83c5cbd5eee718
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Previously, bdev_nvme_apply_firmware() used a temporary character array
to reduce the calls of spdk_jsonrpc_send_error_response().
Change these to call spdk_jsonrpc_send_error_response() directly.
This will simplify the next patch to replace spdk_bdev_first/next() by
spdk_for_each_bdev()ss.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I87ffc9416232dcaba30202ebbe0cb4b185a9563d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Support OCF is now winding down and will not see further updates.
Change-Id: Ica2026d3a9ad13daf677fcce2b7974eb333971fc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required when volume is attached via different storage boxes
for example while migrating it.
Signed-off-by: Gili Buzaglo <gili.buzaglo@kioxia.com>
Change-Id: I680c781ae5de078972d6aef547804d60fff3c643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16407
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add RPC bdev_nvme_get_path_iostat to show I/O statistics for IO paths
of the NVMe bdev.
Change-Id: I22e5ad112d5cfa6d96cf246dcd0e511ae71dc839
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We may need to process multiple events to get all of
the events associated with a newly published service,
so a 1 second poller is actually a bit too long since
we will only get one event per poll iteration. Shorten
it to 100ms instead.
It doesn't appear there is any easy way to use the avahi
API to help with this, maybe we could have some context
variable used to detect if an event was processed or not,
and call avahi_simple_poll_iterate() multiple times if
necessary. This might be something worth investigating
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifea7a99dc8b8b501392e29276b20528a873b1ae1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16327
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently delete_crypto_disk() calls spdk_bdev_unregister_bdev_by_name()
and immediately after exiting that function, it proceeds to bdev name
deletion. This causes callbacks triggered by above call to run with
references to bdev names that are partially unavailable due to free()
functions in vbdev_crypto_delete_name().
Add an intermediate callback that will call vbdev_crypto_delete_name()
and then the original callback that was sent as an argument to
delete_crypto_disk(). That way we are sure that bdev name deletion
is performed right after bdev unregister.
Change-Id: I483ce5c3c63596f54d44220ca61c5e97c3807faf
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The io paths' stat will get lost when they are destroyed. Record
the stat in the nvme_ns structure.
Change-Id: I12fc0b04fac0d59e7465fe543ee733f2822a9cdb
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14744
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added helper functions nvme_ns_alloc() and nvme_ns_free().
This is a preparation for next patch where we will allocate or free
I/O statistics of nvme_ns when this nvme_ns is allocated or freed.
Change-Id: I54b0dba61bd19923178ba4bed97677cf628ba509
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16300
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have stat per bdev I/O channel, but for NVMe bdev
multipath, we don't have stat per I/O path. Especially for
active-active mode, we may want to observe each path's statistics.
This patch support IO stat for nvme_io_path. Record each nvme_io_path
stat using structure spdk_bdev_io_stat.
The following is the comparison of bdevperf test.
Test on Arm server with the following basic configuration.
1 Null bdev: block size: 4K, num_blocks:16k
run bdevperf with io size=4k, qdepth=1/32/128, rw type=randwrite/mixed with 70% read/randread
Each time run 30 seconds, each item run for 16 times and get the average.
The result is as follows.
qdepth type IOPS(default) IOPS(this patch) diff
1 randwrite 7795157.27 7859909.78 0.83%
1 mix(70% r) 7418607.08 7404026.54 -0.20%
1 randread 8053560.83 8046315.44 -0.09%
32 randwrite 15409191.3 15327642.11 -0.53%
32 mix(70% r) 13760145.97 13714666.28 -0.33%
32 randread 16136922.98 16038855.39 -0.61%
128 randwrite 14815647.56 14944902.74 0.87%
128 mix(70% r) 13414858.59 13412317.46 -0.02%
128 randread 15508642.43 15521752.41 0.08%
Change-Id: I4eb5673f49d65d3ff9b930361d2f31ab0ccfa021
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support to specify rr_min_io for multipath round-robin policy,
which makes I/O switches to another io path after rr_min_io I/Os are
rounted to current io path.
Change-Id: I09f0d8d24271c0178ff816fa63ce8576b6e8ae47
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Added helper function bdev_nvme_clear_current_io_path for clearing
current_io_path.
The next patch will clear a new variable of the nvme_bdev_channel
when clearing current_io_path. It is convenient to add a helper
function to clear current_io_path.
Change-Id: I7d445638648ea232fedcbf16736e9c4c73cc9c71
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support selecting io path according to number of outstanding io of
each path in a channel. It's optional, and can be set by calling
RPC "bdev_nvme_set_multipath_policy -s queue_depth".
Change-Id: I82cdfbd69b3e105c973844c4f34dc98f0dca2faf
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement the resize function for RAID0. raid0_resize() calculate the
new raid_bdev's block count and if it is different from the old block
count, call spdk_bdev_notify_blockcnt_change() with the new block count.
A raid0 bdev always opens all base bdevs. Hence, if the size of base
bdevs are reduced, resize fails now. This limitation will be removed
later.
Add a simple functional test for this feature. The test is to create
a raid0 bdev with two null bdevs, resize one null bdev, check if the
raid0 bdev is not resize, resize another null bdev, check if the raid0
bdev is resized.
test/iscsi_tgt/resize/resize.sh was used a reference to write the test.
Using jq rather than grep&sed is better and hence replace grep&sed by jq
of test/iscsi_tgt/resize/resize.sh together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07136648c4189b970843fc6da51ff40355423144
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out block count calculation of raid0 bdev into a helper
function raid0_calculate_blockcnt(). This helper function will be used
to support resize in the following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie99d8686897f1249f48ef8985cb1c8347028fccf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Non-optimized path was not cached for active/active policy unexpectedly.
Fix the bug in this patch.
This will simplify the code and will be helpful to add more algorithms a
little.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I233d9fa6eca73b1e0fb850c7ea4b3474aff6fc1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Unify _bdev_nvme_find_io_path() and bdev_nvme_find_next_io_path()
into _bdev_nvme_find_io_path() by modifying nvme_io_path_get_next().
For active/passive policy, _bdev_nvme_find_io_path() is called only if
nbdev_ch->current_io_path is NULL. Hence, the prev parameter is not
necessary anymore.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If61b8a24b768a1d571c0033b91d9d9bd487b5cf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
nbdev_ch->current_io_path is NULL at initialization.
bdev_nvme_find_io_path() calls _bdev_nvme_find_io_path() if
nbdev_ch->current_io_path is NULL. If there is no optimized path,
nbdev_ch->current_io_path is not filled. Hence, as long as there is no
optimized path, bdev_nvme_find_next_io_path() is never called.
However, bdev_nvme_find_next_io_path() fills nbdev_ch->current_io_path
even if the found path is non optimized.
This is a contradiction and a bug.
To fix this bug, as a preparation, refactor _bdev_nvme_find_io_path() to
cnosolidate bdev_nvme_find_next_io_path() and _bdev_nvme_find_io_path()
into a single function because bdev_nvme_find_next_io_path() and
_bdev_nvme_find_io_path() were almost identical.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7bc4107ce6ae6f116dee03c9bb67d9e4061ce775
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
When an I/O gets an I/O error, the I/O path to which the I/O was
submitted may be still available. In this case, the I/O should be
retried to the same I/O path. However, a new I/O path was always
selected for an I/O retry.
For the active/passive policy, the same I/O path was selected naturally.
However, for the active/active policy, it was very likely that a
different I/O path was selected.
To use the same I/O path for an I/O retry, add a helper function
bdev_nvme_retry_io() into bdev_nvme_retry_ios() and replace
bdev_nvme_submit_request() by bdev_nvme_retry_io(). bdev_nvme_retry_io()
checks if nbdev_io->io_path is not NULL and is available. Then, call
_bdev_nvme_submit_request() if true, or call bdev_nvme_submit_request()
otherwise. For I/O path error, clear nbdev_io->io_path for
clarification. Add unit test to verify this change.
Linux kernel native NVMe multipath already takes this approach. Hence,
this change will be reasonable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7022aafd8b1cdd5830c4f743d64b080aa970cf8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will clear bio->io_path when the error is a
network path error. As a preparation, cache bio->io_path to a local
variable io_path.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0a25f4a70dd1064702b2037283bddd6e789dfae1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is in the same effort as gathering all retry functions into the
same place. This will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If2a017ebda45eb1eaf0dc93b15d02b4122dc3be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15958
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Relocate abort_retry_ios() in a file to gather all retry functions
in the same place.
I/O retry is very complex and an improvement will be added in the
following patches. This will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I84751bd078db4aef753dcc533320cee9aa09c9b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change I/O retry to use the same io_path if
it is still available. However, bdev_nvme_submit_request() always calls
bdev_nvme_find_io_path() first. For I/O retry, if possible, we want to
skip calling bdev_nvme_find_io_path() and use nbdev_io->io_path instead.
To reuse the code as much as possible and not to touch the fast code
path, factor out request submit functions from
bdev_nvme_submit_request() into _bdev_nvme_submit_request().
While developing this patch, a bug/mismatch was found such that
bdev_io->internal.ch was different from ch of
bdev_nvme_submit_request(). Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id003e033ecde218d1902bca5706c772edef5d5e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* generic metadata support for raid modules
* raid is not created when metadata formats for base bdevs differ
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ifaf9cfc4f2472c3820da1070deda758c5334edb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This adds a log message indicating that an lvstore is being unloaded due
to its base device being hot removed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic80c19888edad4bb5ca613a23440aef01de8c6a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Error counters for NVMe error was added in the generic bdev layer but
we want to know more detailed information for some use cases.
Add NVMe error counters per type and per code as module specific
statistics.
For status codes, the first idea was to have different named member
for each status code value. However, it was bad and too hard to test,
review, and maintain.
Instead, we have just two dimensional uint32_t arrays, and increment
one of these uint32_t values based on the status code type and status
code. Then, when dump the JSON, we use spdk_nvme_cpl_get_status_string()
and spdk_nvme_cpl_get_status_type_string().
This idea has one potential downside. This idea consumes 4 (types) *
256 (codes) * 4 (counter) = 4KB per NVMe bdev. We can make this smarter
if memory allocation is a problem. Hence we add an option
nvme_error_stat to enable this feature only if the user requests.
Additionally, the string returned by spdk_nvme_cpl_get_status_string()
or spdk_nvme_cpl_get_status_type_string() has uppercases, spaces, and
hyphens. These should not be included in JSON strings. Hence, convert
these via spdk_strcpy_replace().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07b07621e777bdf6556b95054abbbb65e5f9ea3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15370
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Fix for the issue 2803.
Reporting an error when deleting xnvme bdev.
bdev_xnvme_destruct gets invoked from the fn_table->destruct prior to
the xnvme_bdev_unregister_cb while deleting the xnvme bdev.
Hence removed the duplicate invocation of bdev_xnvme_destruct in
the function xnvme_bdev_unregister_cb.
Additionally, fixed the hang issue when the bdev_xnvme_delete
gets called multiple times for a xnvme bdev.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Ie36a84987ace20d324b7a139ca67fd60bf46e25b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16144
Reviewed-by: Ye Chen <yex.chen@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
* added raid1 module functions
* raid1 logical volume can be created using standard SPDK RPC
* strip size parameter not supported by raid1
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Id3ee1ba0ec28540ca8eb67b04c3ff655a16b1f19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Attribute base_bdevs_max_degraded of raid_bdev_module struct is
replaced with more generic structure allowing implementation of
raid levels for which constraint is by number of operational
drives instead of maximum number of failed drives.
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ie7079993d27d32118b865c3aabd92252a2807b94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
