These routines can only handle a single buffer; double check that is the
case, and fail if not.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I136482c27c73655887c49405f747b8ed073f7b69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie625f374e846f7e6afd6a5d143a5174d27d419b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4095e3c4089b730db123705d0168cd409375cc43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id23c4ef8018d6a7aad42c3d5054fa9addcf16f0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refer to req->iov instead of req->data. As the queue connection code
already presumes a single data buffer, add some sanity checking for
this.
We also need to fix vfio_user.c as a result to correctly set ->iovcnt.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib1e4ef3885200ffc5194f00b4e3fe20ab1934fd7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new API for incremental copying in or out of an iovec, and replace
current code to use the new API.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I088b784aef821310699478989e61411952066c18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This routine was neglecting to reset ->iovcnt, leading to havoc when the
request was re-used.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifd4ac47b95edd517ce5df731c682697bf51da819
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For IC_RESP and C2H_TERM_REQ, use the regular async write path but add
an additional flush. The flush operation reports errors, so we may at
some point attempt to handle busy conditions by blocking. However, for
now this doesn't do that because previously the writev call didn't
either.
Change-Id: I4d05e19ac6dd781be7c96005549abdb52511b8c1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There is a way to pause/resume spdk pollers, however there is no way
to achieve that using public API for the given target which has
a hook behaving similar to pollers. Exposing such functionality can
be used for pausing and restoring target pollers during
reset, e.g. new commands should not be fetched to assure
that all internal resources can be cleared/reinitialized safety.
Pausing target poller during the reset will assure that, without
need for destroying transport or adding condition statements in IO path.
Similar use case might be hitless upgrade. Depending on implementation
there might be need that no new command can be submitted when
secondary processes are being switched to upgraded versions.
Pausing target pollers should be useful in this case.
Signed-off-by: Kamuda Szymon <szymon.kamuda@intel.com>
Change-Id: I419816552c710c43e02197ebcc20a967fb23b3bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And use it in a couple of places.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4b86cef0e9489c1435c0206dd6c5cda4ffe4d33a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In order to connect to a zoned SPDK NVMe-oF target the ZNS specific
identify functions must be implemented and the supported ZNS opcodes
must be set accordingly.
Enable the zone management send and receive opcodes within the
`g_cmds_and_effect_log_page`. If the backing zoned bdev supports the
zone append command the `nvmf_get_cmds_and_effects_log_page` function
will respect that in the returned data structure.
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Change-Id: Id9dd22a8696aa28177cc52e1f3587e10194de910
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16045
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to connect to a zoned SPDK NVMe-oF target the ZNS specific
identify functions must be implemented and the supported ZNS opcodes
must be set accordingly.
Implementing ZNS specific identify functions to return the 'I/O Command
Set specific Identify Namespace data structure (CNS 05h)'
(`spdk_nvmf_ns_identify_iocs_specific`) and 'I/O Command Set specific
Identify Controller data structure (CNS 06h)'
(`spdk_nvmf_ctrlr_identify_iocs_specific`).
Those functions return a null filled data structure for any I/O Command
Set other than ZNS.
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Change-Id: I6b9529ce0a86400afb01d4e09cbdb3e5c3a68514
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16044
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If host disconnect the connection when fabric commands are offload to
DSA, there will be use-after-free problems.
Now, disable the offload of fabrics command.
Fix issue 2828
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I669b01728e1ad275b7b121d47141bdf3fe5f7d9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Refactoring to avoid code duplication in the following commits.
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Change-Id: I5a597a02c810cfa1fad6dc397d012cf6a3f189ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16043
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use uint32_t to avoid overflow when left shift by 16 places
This patch fix issue #2858
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I07f4328674ae7bd7525792ca1e424e85a932c87f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
nvmf_ctrlr_cmd_connect() can only handle a request in one buffer
(req->data); sanity check it's not split across IOVs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I595d8542ce71e56cf2b074f4cf41bce440f6dc26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16123
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This code has a similar potential problem as the identify
and log page commands did: stop using req->data in favour of IOVs.
We also need to fix the unit tests to initialize the iovs.
We don't change the existing "set" behaviour of requiring a single IOV
here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I257567a7abd5fc3ed9ee21b432c7da7d70fbbde0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16122
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the previous fix:
adc2942ad nvmf: nvmf_ctrlr_get_log_page use iovs to store the log page
a data corruption bug in the log page code was fixed. Previously, it
used req->data, which may be too short a buffer in the case that the
buffer is split across more than one IOV. req->data is never safe to use
in this situation. The code was changed to use the provided iovs instead
of req->data.
However, the identify command handling was still vulnerable to this
problem, and has been seen in real life at least with a CentOS guest VM.
The fix is basically the same: use the IOV utility functions to write
out the response instead of directly trying to use req->data.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I00445895af20e43be73189629576eee0667f86dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16121
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move the IOV handling code in ctrlr.c to the top of the file, for
subsequent use.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibddde1cb964d8aaecf4673ffa6d4147d0a48020c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a define for the Identify command buffer instead of using a raw
value.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9073ff84e2fa2ef9268051b898fe1027d8e97baa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Basic IO completion counting can be done at the common
layer, to enable some level of stat tracking even for
transports that don't have transport-specific tracking
yet.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If04f854b97440089b8ad149b64cb59173c73975c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
In _free_ctrlr(), ->endpoint can never be NULL, and the code was
self-contradictory; assume it's not NULL.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I81a449123ca05f64460380dc3a8ad8af2143d166
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use standard "sqid" naming for a log message.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Icca8415cd17272ca7bd82667721c4131dd1df7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Both the length of a request and the number of ranges to copy are
controlled by the user, so we should check them and return an error
instead of asserting that they're correct.
This fixes the `test/nvmf/target/fabrics_fuzz.sh` test.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3481c4bb1f2c7676df81f41dfc95ef063924222e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15805
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If a lot of qpairs are connected all at once, the
RDMA optimal_poll_group logic does not work correctly,
because it only accounts for qpairs that received
their CONNECT capsule. Now that we have a counter
for a poll group's unassociated qpairs, use that value
to supplement the current io qpair count.
We can just assume for now that all of these unassociated
qpairs are io qpairs. That won't always be true, but
for purposes of picking the optimal poll group it is
sufficient.
Note that for RDMA, we could increment the counters
based on the RDMA qpair ID in the private data in the
rdmacm connect, but to keep the code simpler and common
across all transports, we defer the accounting until
after receiving the CONNECT command, so that it is
the same for all transports.
Fixes issue #2800.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5897d6ebac23d3b78b100e3fef5a7f9fb5304820
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15695
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use a local variable to hold the qpair count.
While here, also use pg_current to get the min_value,
this is a bit simpler to read than things like
(*pg)->group.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65771fb469f021e9e77b8a6c117841b8f4b66af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We make decisions on how to pick a poll group for a new
qpair by looking at each poll group's current_io_qpairs
count. But this count isn't always accurate since it
doesn't get updated until after the CONNECT has
been received.
This means that if we accept a bunch of connections
all at once, they may all get assigned the same poll
group, because the target poll groups counter doesn't
get immediately incremented.
So add a new counter, current_unassociated_qpairs,
to account for these qpairs. We protect this counter
with a lock, since the accept thread will increment
the counter, and the poll group thread will
decrement it when the qpair receives the CONNECT
allowing us to associated with a subsystem/controller..
If the qpair gets destroyed before the CONNECT is
received, we can use the qpair->connect_received
flag to decrement current_unassociated_qpairs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8bba8da2abfe225b3b9f981cd71b6f49e2b87391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently we use qpair->ctrlr at qpair destroy
time to decide if we need to decrement the
qpair's poll group's qpair count. But this is
not correct - these counters get incremented
when the CONNECT is received, but qpair->ctrlr
doesn't get set until later.
So add a new connect_received bool to the spdk_nvmf_qpair.
Use this instead to determine when we should decrement
the poll group qpair counters.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I174a0fda36c4558171953bf58f2f5117bc074f76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At least recent Linux guest VMs send SPDK_NVME_IDENTIFY_CTRLR_IOCS as a
matter of course. While this isn't supported in lib/nvmf, as this
doesn't represent an error, reduce the log level of the error message so
we don't spam the logs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I095de3e4331b3912cbc457da6d722b9883ec7884
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Optimal I/O boundary causes I/O to be split in the nvme driver. This is
a problem for writes if write_unit_size > 1 because the split I/O may
not match the write_unit_size.
Fixes: #2791
Change-Id: I437e6cb6d8e2415658d5b46539feeacb5363fd46
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The correct SPDK thread is already contained in the poll group.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I4eefe2ba60c77c01a866a693bccbb8affc8262ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the guest performs a hard shutdown we're not deleting the CQs:
nvmf_vfio_user_close_qpair calls delete_sq_done, which won't delete
the CQ because vu_ctrlr->reset_shn is false.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I383fb985340a0d9d0eb7fea7403372cbdc55a089
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eventfd may be passed by libvfio-user to the remote process which
might remove the EFD_NONBLOCK flag, in which case we would block
indefinitely.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: If9826cd700b4a7b3458a0a8278a96322d99ac08e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
