Script was written in such a way that tests would be
performed starting with all found NVMe disks in configuration.
Then the number of disks for the workload would be reduced in
loop until reaching 1. This is the scenario used in test
case 1, described in SPDK NVMe Performance Benchmark document.
--disk-no allowed to avoid running test in loop, and specify
just a single value for the number of disks to be tested.
Both loop logic and --disk-no are no longer required as
tests are scheduled and run via CI system which picks the
parameters for each test run.
Change-Id: Iad0f4d0d259ac64680fd5bb69d7cbb7e0afff79c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Change divisor in nsec to usec calculation to "1000".
- Ignore MIX param when rw mode is set to 100% read or
100% write.
- Use MIX param as number in 0.0-1.0 range for calculating
summary read+write latency.
- Use jq "//" alternative operator when querying for fields
which might not exist in JSON object. Assume "0" for
non-existent fields, otherwise jq reports "null", which
in turn results in script errors.
Change-Id: Ibc8f91f058d9ae31ee1b60f4b253c42b743ae22f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3294
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous changes moved some of the fio CLI parameters into
a bash heredoc to save into a text file, but it was put in
wrong place in the script.
Move global fio parameters a couple lines up so that the
resulting fio config file has the correct form of:
[global]
global_params
[testjob]
testjob_params
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3a958fe5ce880ab63a079c345e6b24fd1d3bae32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3293
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are many Target information which exceeds the data
buffer, the initiator and target can use long text responses,
but SPDK doesn't support this feature now, so here we just
report an error here, we may add this feature in following
patches.
Fix issue #1442.
Change-Id: I5962c00943819cd11ce21e610e4b37265451f0cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3454
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no reason to continue processing these requests if the
qpair is not still active. We should complete them and free
any resources they are still holding.
Also, not doing so can cause issues with trying to access pointers
in the qpair after they are invalid. See issue #1460.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6e570a576983dfedf726dc4a9a83316209403e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call recv to trigger busy polling even when no socket is active. when
epoll_wait returns zero, the first socket in poll group is used to
trigger busy polling in kernel stack and potentially reap incoming data
Change-Id: I15f04cb4a2c7b382dd07391eda69678fd7919790
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Doesn't provide any performance benefit but lets apps consistently
use the batch interface regardless of engine. Additional functions
and test code to follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia737045560ddd5117a689f7715fa206268bbc13d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2911
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch uses the IDXD batch feature for initial queue depth loading.
As there is a good amount of code needed to support batching on a per
command basis, this starts with only copy. As other commands are
enabled for batching, they will be added to accel_perf. If batching is
not available, the perf tool will simply submit the initial queue depth via
a loop, the same way it did before batching.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2669936e4da9b31a1d8fa8f0c71e9f5a6fcae412
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk/nvmecli git index happens to be corrupted and
results in a lot of unrelated failures in the CI.
This patch attempts only to mitigate the issue of
unwanted failures by restoring nvmecli repository
to clean state.
Fixes#1496
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic17bffb0bc5bd3222c9f395fb217d2ffae99ceb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Running pkgdep on opensuse, but report error about:
'Not supported platform detected.'
ID=opensuse-leap must link to sles.sh.
So add this.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I059378da2b1a9cb7b7f6953d158956690d80053b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3220
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Suppres the following warnings which causes compilation errors:
1. gcc 10 complains on operations with zero size arrays in rte_cryptodev.c
Suppress this warning by adding -Wno-stringop-overflow compilation flag
2. gcc 10 disables fcommon by default and complains on multiple definition of
aesni_mb_logtype_driver symbol which is defined in header file and presented in sevral
translation units. Add -fcommon compilation flag.
Fixes issue #1493
Change-Id: I9241bf1fd78e86df6a6eb46b4ff787b2f7027b7d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3373
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a new sample application to test I/O abort for NVMe backend,
both PCIe and over Fabrics. And enable it to test pool by NVMe-oF
+ delay bdev + malloc bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5aa28b523bdb2c1d4d8c7af05f925c4dd01dda86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2661
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch will add the uring support to test kernel based
local devices, e.g., files or local NVMe devices.
To make one binary can support both uring and aio mode when --with-uring
is complied. We also introduce a new global variable g_use_uring to switch
the mode to use liburing or libaio.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I72851168cb377751313d7aa09040ef2a7eb76594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3214
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This macro works only in debug build, in release it always returns
false.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I949ac5f3e3ff811bd4590645300c536c5a6afab6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3358
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Bdev underneath lvs has a certain value set as block size,
then lvolstore inherits that as `io_unit_size`,
which ends up as block size for the lvol bdev presents.
Before this patch lvs on device with block size of 512,
would create lvol bdev with block size of 512.
Meanwhile reporting in bdev_lvol_get_lvstores(),
that block_size is 4k instead.
This was result of addition of io_unit_size and
forgetting to update the value here. Previously
only I/O of page_size was allowed.
This patch adjusts the value reported to
io_unit_size.
Alternatively it could have been removed,
or name changed to "io_unit_size".
Yet for API compatibility reason this name
remains.
Info on actual page size which is always 4k,
is not useful to bdev users. No need to add
another field for that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I19701c408c389f64e25c027c7bba789294bbed94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3289
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We added the uring socket implemenation in 20.04, but
we did not announce anything since uring is experimental
and there is no test in our CI. Now, the uring socket
implementation can be announced because we added the
related test in our CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1c4fbf84d46f8632e7468bc9833050ba30f90649
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adding fedora31 to the list of available choices
in create_vhost_vm script.
This requires some changes in Vagrant_vhost_vm because
fedora is configured differently than ubuntu.
Fedora VMs will very useful for vhost tests because
they run on fedora.
Change-Id: Iad2820a9c3fe2621a368be34d9a72b80ad3f4941
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1677
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During nvmf perf test, on machines with have local
nvme device figure out that they are added to
fio.conf file, that can caused bad for results.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibb6aa7b29ee63a8c41cd80909bc26d1dc224dd0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3113
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b43e79c3b0d9c53ed04b01a9eaa9b117b32d81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3013
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to tqpair->group->group.pending_buf_queue.
If the state of the request is DATA_TRANSFER_TO_CONTROLLER_PENDING,
the request is queued to rqpair->pending_rdma_read_queue.
If the state of the request is DATA_TRANSFER_TO_HOST_PENDING,
the request is queued to rqpair->pending_rdma_write_queue.
According to the current state, dequeue from the corresponding
queue, and then call an new helper function
nvmf_rdma_request_set_abort_status().
Using helper function will be easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0327f4d2c4728a11b3b6bbc7c2252f0b35263cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3012
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_rdma_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS, or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1462a21db7270f3d63f8f293ad4be61d52e74da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3011
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98347b68e8b6b4a804c47894964cb81eae215aaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3010
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use logical block size instead of base bdev block size in
vbdev_compress_claim. This is relevant to enable the compress bdev to
present a logical block size that is different from the block size of
the base bdev (e.g. 512B logical on 4KB base bdev).
However, this is just an internal fix/preparation and there is
currently not yet a way for users to specify a different
logical block size, e.g. through an rpc.py parameter.
Signed-off-by: Sven Breuner <sven@excelero.com>
Change-Id: Id7562f0da234ce11242b7ee78837a317ee51c211
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In my mind, we should firstly remove the sock from the group, then
all the call_cb of pdus will be handled, then we clear the task,
we can avoid the duplicated resource recycling.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic5fad130e58c9dcb42a237973979b042eabdf43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3309
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bandwidth measurement is realized by bwm-ng tool.
Using this measure tool will help us to check network saturation.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b95b9b4ac3ca3b1847ec72ab7ea333807befe89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3190
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to both tqpair->group->group.pending_buf_queue and
the queue per state.
If the state is AWAITING_R2T_ACK, the request is queued to the
queue per state.
Dequeueing from the queue per state is done in
nvmf_tcp_req_set_state(). Hence explicit dequeuing only when the
state of the request is NEED_BUFFERING.
Most abort operation is common between two cases. We can use fallthrough
in switch-case but factor out the common operation into a helper
function nvmf_tcp_req_set_abort_status() instead because we may use
the helper function in future and using helper function is easier to
read than fallthrough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1695b084d5d1f2537fbdd512bc3cd136e0f6a65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3009
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_tcp_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1abceecc211ee79d8ac18a82dc63b13d313a6f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3008
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Add three variables, poller, timeout_tsc, and req_to_abort to
struct spdk_nvmf_request to wait until the request to abort is
abortable without using any dynamically allocated context.
struct spdk_nvmf_request is already very large (968 bytes), and
the pahole tool checked these variables did not create any extra hole.
Poller pointer and timeout value are usable for other potential
cases, and so use generic names.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7202ade181365ab586d8c30383b3ea0fef82dcff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out abort operation on the specific qpair into a helper
function nvmf_qpair_abort_request().
After this refactoring, nvmf_ctrlr_abort_done() calls
_nvmf_request_complete() only if the passed status is zero.
If the passed status is not zero, nvmf_qpair_abort() is responsible
for calling _nvmf_request_complete() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4828c0e21cc7650210675661d6e1c0fd54c7a2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Description is not clear but according to the NVMe specification,
always set the completion status to success and differentiate only
the bit 0 of CDW0 between success and failure for abort command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0195e72fe1d7fcc2592f47e9dcf92ac56912282c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1965
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change NVMe bdev module to enable abort as IO type.
Change _bdev_nvme_submit_request() to process abort request when the
IO type is abort.
The current thread tries aborting I/O command in the I/O qpair first.
If no I/O command to abort was found, send message to the thread which
is registered when creating controller. The controller thread tries
aborting admin command in the admin qpair next. If no admin command
to abort was found, complete the abort request with failure.
spdk_nvme_ctrlr_cmd_abort_ext() is used to try aborting command whose
cb_arg matches. qpair is set to NULL when trying to abort admin command.
Before calling spdk_nvme_ctrlr_cmd_abort_ext(), save the current
thread to process admin command completion correctly.
spdk_bdev_abort() supports any bdev module other than NVMe bdev
module and does not check CDW0 but checks only if the completion
status is success or failure. So add bdev_nvme_abort_done() and
converts the NVMe completion status to the bdev completion status.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6aebae0ba2f6c5834ee926e161af9c4d825f341
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread pointer to struct nvme_bdev_ctrlr. The thread which
created nvme_bdev_ctrlr is set to the pointer.
The thread pointer will be used to limit only one thread to submit
admin abort.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia39d5cbc7a13b0e0022c0d5591069ea8776ef774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3244
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
