This patch defines a new function, spdk_sock_readv_async(), which allows
the user to send a readv request and receive a callback once the
supplied buffer is filled with data from the socket. It works simiarly
to asynchronous writes, but there can only be a single outstanding read
request at a time.
For now, the interface isn't implemented and any calls will return
-ENOTSUP. Subsequent patches will add support for it in the uring
module and as well as emulation in the posix module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I924e2cdade49ffa18be6390109dc7e65c2728087
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In NVMe/TCP target, the socket low water mark is set to
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes.
In corner test, there might be 4 bytes data packet sent to
NVMe/TCP target, after that, if there is no more data sent to
the same socket, the 4 bytes won't be read by NVMe/TCP target
qpair thread. Because of this, there is a IO request didn't
complete in initiator. Then, if manual call the readv function to
read the 4 bytes for the pdu in target, the io request complete
normally in initiator. It seems like the pdu might be split,
and in the situation, the IO request will not complete until
new IO request reach.
After set low water mark in NVMe/TCP target to 1 byte, just
like iscsi target done, the issue disappear immediately.
Signed-off-by: BinYang0 <bin.yang@jaguarmicro.com>
Change-Id: I59d3d900f0b25632d786ef25ab096eabe43476bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13633
Reviewed-by: <chuanwei.ji@jaguarmicro.com>
Reviewed-by: Qingmin Liu <qingmin.liu@jaguarmicro.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is a nicer API to allow users to use an
md-related API such as spdk_bdev_read_blocks_with_md
passing md_buf as NULL to mean "don't read metadata".
This avoids the need for an if-statement in the users
code to check if the md buffer is NULL before deciding
which API needs to be called.
This basically requires two changes:
1) only check if the metadata is separate for the bdev
if the md_buf != NULL
2) do not fail if the buffer is specified but the
md buffer is not (we only need to fail the case where
the md buffer is specified but the data buffer is not)
Note that spdk_bdev_readv/writev_blocks_ext was already
allowing the metadata buffer to be NULL, but change
those functions too to match the others on how we check
if the data buffer isn't allocated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I764cf49b9f573fccb19e73876a376fd231cc3580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow the code calling this RPC to interpret the error and
check whether the transport already exists (-EEXIST) or some other error
occurred.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8c4af84763ddba908c59ff881b09834a439186a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
In the multi-process case, a process may call `spdk_nvme_ctrlr_free_io_qpair` on
a foreign I/O qpair (i.e. one that this process did not create) when that qpairs
process exits unexpectedly.
The variable `qpair->poll_group` isn't multi-process safe, we can't use it
in `spdk_nvme_ctrlr_free_io_qpair` and related transport poll group APIs.
Change-Id: Ic13a6a2c7d760477be5be5a56a45caa2b5518717
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Currently we initialize pending_bytes only in pre-copy state. This is
pointless since we don't generate any migration data at this state, so
if the vfio-user client reads migration data it will be garbage. Even
worse, we don't re-initialize pending_bytes in stop-and-copy state, so
if the vfio-user client reads the entire migration data in pre-copy state
then there will be nothing left to read in the stop-and-copy state,
which is where we actually produce the migration data. This results in
corruption of the controller's state (e.g. queues).
This patch ensures that migration data are available in the
stop-and-copy state, by setting pending_bytes accordingly only in that
state.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I0b215e64cd1f58f254e1079f06402d196f984099
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11718
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The read_data, write_data, and data_written migration callbacks assume
that the migration data are accessed in one go. Until this is fixed,
with this patch we ensure we don't ignore unsupported ranges.
Change-Id: I640415858b8c374ffc9e487cd20f5130e0be9305
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11717
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the callers immediately put the req right
after the nvme_rdma_req_complete call, so just move
the put into that function instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic370cf689850924e0c902a6071af8b3a7ed58c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie and tcp
completion paths, including omitting error
messages when aborting aers by adding a print_on_error
parameter to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id558d0af2cdd705dfb60abb842bd567a0949ccce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_tcp_req_complete_safe caches values on
the request, so that we can free the request *before*
completing it. This allows the recently completed
req to get reused in full queue depth workloads, if
the callback function submits a new I/O.
So do this nvme_tcp_req_complete as well, to make
all of the completion paths identical. The paths
that were calling nvme_tcp_req_complete previously
are all non-fast-path, so the extra overhead is
not important.
This allows us to call nvme_tcp_req_complete from
nvme_tcp_req_complete_safe to reduce code duplication,
so do that in this patch as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I876cea5ea20aba8ccc57d179e63546a463a87b35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
All callers of nvme_tcp_req_complete call
nvme_tcp_req_put immediately afterwards, so move
this call into nvme_tcp_req_complete.
This will help enable some improvements in later
patches.
Note that nvme_tcp_req_complete_safe has this same
functionality open coded right now, but that will
get changed in the next patch. It calls
nvme_tcp_req_put immediately after the TAILQ_REMOVE,
so do that in nvme_tcp_req_complete as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I368122bc49a7f0772e3011e5427e3c43618380eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
QEMU may exit due to some exceptions which mean the socket
connection may be disconnected at any time, so for asynchronous
callbacks especially the subsystem pause/resume callbacks, they
all run in asynchronous way, the controller pointer may become
invalid before the callbacks are called.
Fix#2530.
Change-Id: I6d73597d75761e28844e83bfee7f8a446d85fa49
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK was previously incorrectly requesting log levels such as
LOG_NOTICE. Update libvfio-user so it is in fact supported, and check
that setting up the callback actually worked.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I41c2a8cf683868c3c2e40470f78e1af3dba29de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12839
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Update libvfio-user such that the SGL access APIs can be used
concurrently. We are guaranteed that the guest memory remains mappable
now that the vfio-user transport has implemented quiescence.
This is currently only really useful (for a single controller) in poll
mode, but shouldn't break interrupt mode, as we still ensure all a
controller's queues are on the same poll group in that case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0988e731558e9bf63992026afc53abc66ec2a706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12349
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
the underlying spdk_cpuset_copy() takes `const spdk_cpuset*` as the
`src` parameter. there is no need to take non-const spdk_cpuset*.
hence, in this change, let's relax the requirement of the pointer type.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: I1f626c7fea45cf7250bf56b891bcba4a0f2a8917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13443
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We had not incremented ctrlr->outstanding_aborts when aborting a
request in the ctrlr->queued_aborts, and ctrlr->outstanding_aborts
became negative. Fix the bug in this patch. Additionally add assert
to check if ctrlr->outstanding_aborts is not negative.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I58090286f070ba854bdea87f0f8ecb7810890338
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13452
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
While we are quiesced, we're not allowed to access guest memory via the
SGL APIs. Refuse to process any commands unless we're in RUNNING state.
We need to synchronize with each poll group via a message before we can
call vfu_device_quiesced(), otherwise we could still be processing
commands via nvmf_vfio_user_sq_poll().
For interrupt mode, we then might miss processing commands in a
corresponding interrupt callback, so make sure we process them when we
return to RUNNING state.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ieae5a9ae8d9de722e0bdf4bb8d61e7e678159f1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12912
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
An oversight meant that quiesce was in fact only pausing the admin
queue, and not ensuring no I/O was ongoing. Fix this by passing the
right flag to spdk_nvmf_subsystem_pause().
Change-Id: I930c616d1170ac0299339b04928da57f6a7489ab
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the broadcast NSID is supplied, every namespace is paused.
Change-Id: I40cc3e04b5a75b731ab0c8946ed8146275cc8ee4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13394
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Profiling data showed the deference of the CQ head in cq_is_full() was a
significant contributor to the CPU cost of post_completion(). Use the
cached ->last_head value instead of a doorbell read every time.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib8c92ce4fa79683950555d7b0c235449e457b844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fully asynchronous ctrlr detach (b6ecc3729) introduce a register
operation state machine that waits for operation to complete. When
controller failed to initialize, `nvme_ctrlr_fail` set qpair state to
`DISCONNECTED` immediately, causing qpair process completions to
never complete register operations therefore prevent async detach exit.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I205c5157b8ea7b4535f98ff4052414310e421446
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12858
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reactor_run() decides whether to start gather_metrics
based on non-zero scheduler period.
The default of 1 sec was set during initialization,
in scheduler_subsystem_init().
This resulted in unessecary operations each second,
even if only 'static' scheduler is used.
This patch moves setting default scheduling period to
respective schedulers.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I953aee271a959b6314c8e83434c922dba9638de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
When calculating the bar_addr which is used to access SPARSE MMAP area, we should use the
(offset - region->mmaps[i].offset) as the increment to get the valid access address.
Signed-off-by: Jun Zeng <jun1.zeng@intel.com>
Change-Id: Ie5d0c63cf572847d15dc92f0995fddecf35f1cdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13021
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rte_power was added to DPDK long time ago,
but some of the DPDK packages do not include it.
For those cases just skip building components that depend on in.
This change still allows to use dynamic scheduler, since
the dpdk_governor usage is optional.
Fixes#2534
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ied88edc8d58aae07d1384c1c40203fc80b919d80
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12993
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dpdk_governor and gscheduler use rte_power,
which is only available on Linux and when
DPDK env is used.
Rather than repeat those checks in each mk or Makefile,
added DPDK_POWER flag directly to DPDK env.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I438caad8d333a4df697a79aa45de2930cce71d23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12992
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_net is a dependency for both rte_vhost and rte_power.
Next patch will simplify the checks to include rte_power,
and keeping this depenency next to component that directly
depends on it will make it easier to understand.
Since DPDK_LIB_LIST is sorted by the end of the env.mk,
it shouldn't be a problem to include the rte_net twice.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If2bb2aa5d972148ca8143023657b0aec45306a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12991
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When running perf test, sometimes after CONNECT req's resp was
received and processed, the qpair still failed to change from state
CONNECTING to CONNECTED. For when it goes to nvme_fabric_qpair_connect_poll
-> nvme_wait_for_completion_robust_lock_timeout_poll to process the
CONNECT req's resp, the req may have not been finished in sock_check_zcopy,
although its resp has been received and processed, which means the
tcp_req->ordering.bits.send_ack is still 0 and the status->done still
is false. And after the req is completed in sock_check_zcopy, we need
to poll this qpair again to make the state enter CONNECTED.
And if icreq's resp received and processed before nvme_tcp_send_icreq_complete
is called by _sock_check_zcopy, the qpair will be stuck in CONNECTING
and it never proceed to send the CONNECT req. We also need to put it
in pgroup->needs_poll to fix it.
I can reproduce this bug with the following configuration.
target: 16NVMe SSD, running on 20 cores;
initiator: randread test using nvme perf with 32 cpu cores and
zerocopy enabled.
The error doesn't always occur. CONNECT failure is about 1 failure in
ten with the following log. And icreq failure is less frequent with
only target side's "keep alive timeout" log.
Error reported in initiator side:
Initialization complete. Launching workers.
[2022-05-23 14:51:07.286794] nvme_qpair.c: 760:spdk_nvme_qpair_process_completions:
*ERROR*: CQ transport error -6 (No such device or address) on qpair id 2
ERROR: unable to connect I/O qpair.
ERROR: init_ns_worker_ctx() failed
And target side shows:
Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout
Change-Id: Id72c2ffd615ab73c5fc67d36c3ff8b730cebcef7
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12975
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Patch below changed the struct spdk_nvmf_ctrlr_data by inserting
spdk_nvme_cdata_fuses. This affects large number of nvmf interfaces.
(cbfd581) nvmf: Add NVMe fused operations to spdk_nvmf_ctrlr_data
Unfortunately was missed due to lack of rebase after ABI update on
CI machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifd06d0ddbefe9ea6c9715adae9881d4606e34b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13013
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Community-CI: Mellanox Build Bot
