There is a call to spdk_bdev_close () during spdk_bdev_part_base_free
(). This will trigger spdk_bdev_module-> module_fini () if this is the
last descriptor to the last bdev. In module_fini () resource might be
freed. But then, after spdk_bdev_close(), call to base_free_fn () is
done which may try to free the same resource again.
To avoid this, call spdk_bdev_module_finish_iter () after
_spdk_bdev_finish_unregister_bdevs_iter () return.
Change-Id: Ia6eb210504d121772221da18651a90ffc89dbbc4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405322
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Listing them through get_bdevs is not enough. Some
devices might not have any LUNs presented while expecting
some to be hotplugged in the future.
```
$ rpc.py get_virtio_scsi_devs
[
{
"virtio": {
"vq_count": 18,
"type": "user",
"socket": "/tmp/vhost.0",
"vq_size": 512
},
"name": "VirtioScsi0"
}
]
```
Change-Id: I56857d7a0637300beba39a8d83a98447f1f74ce7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405182
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove configuration of an error vbdev at the removal of the vbdev.
This will lose the strict compatibility but the next patch will make
possible for us to add the removed config dynamically.
This patch will make the implementation cleaner and will not lose
any usability.
Change-Id: Idea7767ab5424427f912c82c66ff7d59d28108ab
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403915
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The malloc and null bdevs generate a random UUID if it is not specified
in the construct RPC method; save the current UUID in save_config so we
can reproduce it in load_config.
Change-Id: Iabaa96fa3129189ae6acf3635345b98f71255fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405110
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, device removal is now always deferred to simplify
the locking.
Change-Id: I6b994531630b64860da728a93a0f2d613d8aa5ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each device was being removed from the tailq twice.
virtio_scsi_dev_remove does the removal by itself.
Change-Id: I2320fc88ac60ddd5952b07b26c679c8f2e887976
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support the virtio RO flag, so that read-only devices
will successfully initialize now. Also do not allow
issuing any writes on a read-only device, so we don't
flood it with requests that are to fail.
Change-Id: I6b77f2338e4478a9abf2d5286344f6412d79284c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch 583a24a4 [1] moved io_outstanding field to the
bdev_module_channel as it was needed there. This patch
re-adds another io_outstanding field to the bdev_channel.
We *do* want to count outstanding I/O for particular bdevs
- mostly for debug purposes.
[1] 583a24a4 ("bdev: share nomem_io data between bdevs built on the
same device")
Change-Id: I723e72c36447f9f778f88fc1769619676cbbaf71
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The version of ittnotify_static.c shipped with VTune Amplifier XE 2017
triggers the new GCC 7 -Wimplicit-fallthrough warning.
Change-Id: I8a43beddf464853407639742b1eb89bcac39136d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the handling of I/O completions that need to be sent as a
message so that they are handled in a single place in
_spdk_bdev_io_complete().
Change-Id: Ic94354ad947d0f1f11241f728aa194a105ff96c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404184
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flip the status != NOMEM check around so that the logic is easier to
follow.
Change-Id: I607e8b5f0cfaa3598a623d0fc3642b11bd42decd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
vbdev_error_init holds config information and examine() uses it.
This patch is necessary to keep compatibility from the .INI config
file to the upcoming JSON config file (based on JSON-RPC).
Change-Id: I1601b7e0dad5f93662177c59536776afd974ff07
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When vhost has sent too many events and the eventq
ring is full, the very next event will be sent with
EVENTS_MISSED flag set. Virtio after processing such
event should do a full target rescan to manually detect
all changes - this implies
1) hot-attaching targets that appeared, and
2) hot-detaching those that don't respond properly.
Virtio has been doing only #1 so far.
Change-Id: Ib8be986588913ad41296dcfd6558ff705b99007c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402120
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtio response codes other than OK, BAD_TARGET
or INCORRECT_LUN indicate an intermittent device/transport
failure and don't need to be handled by each message
response handler separately.
Change-Id: Iab0b03b3c7b377d2b346344c32e5df143df528b0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402119
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The helper functions were only needed when this was sent as a message,
but they are only called directly in the current code, so just move the
contents of the functions inline to their call sites.
The unregister path can also be simplified to pass the poller directly
to spdk_poller_unregister(); it already handles the case of a NULL
poller.
Change-Id: I509cf8922b53e1e616c9e976610b20061bb50066
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403364
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (spdk_mem_get) instead of
abort()'ing in static bdev function.
Change-Id: I0ee2ce4b7e81cf80546119e3db27c987fa912749
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be used to force specific UUIDs for testing.
Change-Id: I40c403fd00c142552d632dd5f0fbe1ea9a6c9962
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403221
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
A bdev that is claimed is not a leaf, even if it has no vbdevs exposed
currently.
Change-Id: I3b790068128890a569f83b15071ea916c54bff9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
