Allow passing additional args to discover_bdevs function,
primarily for use in bdev_svc app.
This is needed mostly in case of virtio tests when host
uses 2MB huge pages - "-g" option is then needed to run
SPDK app.
Need to make timeout value hardcoded while at it.
Can't have 2 optional positional arguments. Timeout as
an option is never used so this shouldn't be a problem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2021/4 (master)
This patch is a bit different than it's merged version in
master branch (a3e5b5d0ec).
This was done to allow running virtio tests with 2MB
hugepages.
(cherry-picked from 387fe9f44d80411013dada4f6d73fc49505bfaed)
Change-Id: I2a455f9d23fafbf0746423f69379b74939ac2e9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2104
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow multiple fio config files and fun them sequentially
in loop against provisioned Vhost+VMs setup.
This should decrease total time needed for performance
benchmarks as we can re-use current configuration rather
than provision from scratch for each workload.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0c4e37f0bb9f49f7614c8001d74d72b99470c084
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fio output was saved to the same file as original
fio config. For a single test run this was not an issue,
but in case we run more iterations (like in performance
tests) we cannot overwrite the original config file.
Use fio config file name (without file extension) and add
".log" to the name.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If6f9d582ff5817c85b7cbf9192530b87a2079274
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1898
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Missing space caused wrong string concatenation
when running test with multiple VMs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I594035b3c5c952cf74e4b6c2002e975f82e303a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1896
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow to run fio bdev plugin with attached virtio
devices. This might allow to get better performance
results when running performance tests.
Fio is not run in client-server mode due to problems
experienced when running fio plugin that way.
These changes are not generic and will not work
in the CI out of the box. New VM image must be crafted
in order to run fio in this mode. VM must have compiled
SPDK and FIO binary already in place.
Change-Id: I2e957e1e3a573cc899fcfbe5918193e1af6a9a63
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using --local acutally wait for fio processes
to finish and then gather results back to the host
system.
--local allows to run independent fio instances
on guest systems, avoiding fio client-server mode.
This will come in handy when trying to run fio bdev
plugin with virtio bdevs in guest systems.
At the moment fio plugin does not work in client-
server mode, so "local" must be used"
Change-Id: I2020c1b636fbf4ab1fe8ef590639e0dbfd905414
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1533
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
run_fio.py was initially added (as the name suggests)
to run fio workloads on VM guests in client-server
mode during vhost tests.
Over time some of it's functionality was moved to
test/vhost/common.sh, so at the moment this script just
creates a command string and starts it. Using separate
Python script is just an overkill.
run_fio.py also contained an option to measure
VMEXITS on the guest side, which is never run in tests.
If needed we can re-add it in other commits.
Change-Id: I87a4c824dc09220bb6ce709355ee2d65e0ce3540
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1460
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the hugepage we use is 2MB, the numble of hugetlbfs will exceeds
the limit of 8. we must pass "-g" to vhost_fuzz app, which will pass
"--single-file-segments" to DPDK to create a single non-physically-
continuous hugetlbfs file for all its memory.
Here we pass "-g" to vhost_fuzz app which make the script work under
both 2MB and 1GB hugepage.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I0287584c54f03a379957d6885c23e21a1fd10c4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was removed for other/negative.sh test.
There is no need to keep it more for one scripts with test
as vhost configuration can set by series of rpcs.
Change-Id: I86937a5f38641f5ce48c00836e050623c90bdd27
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Need one more malloc bdev.
Change-Id: I9884829e1683bfa0e9653f2edbb020d002b7b060
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 29e9fdc857.
Nightly tests after merging the reverted patch show that it does not
pass in current state. It affected the per-patch, since the new
tests weren't added to skipped_tests list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8a58cbe9ecd0e58f20c0a9ee844bc9a8ee046a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1045
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With this change user can defined test cases that he wants to run.
It could enable to run hotremove test cases per-patch and nightly.
Change-Id: I6876f39886a347ada4dd548a2f45b99a37207c3e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since there's more than one fuzz app covering different areas, rename
FUZZ_UP to VHOST_FUZZ_UP to make the type of the app clear right off
the bat.
Change-Id: I7730f1e14895d9221ec76dea0f53b5054a97be1c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of declaring each app in the actual test, source their default
declarations from a single location. Additionally, use them as arrays
now instead for easier cmdline management.
Change-Id: I0ea39403f070dc57987065ebb800e91c35de643a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's good to have a human readable domain again.
Change-Id: If773e28a267b635a94a45b07fba9a32d62d0c248
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use provided configuration file via --disk-map option
instead of creating bdevs and VMs in ordered sequence
(e.g. 0 to 10, etc.).
This allows to:
- specify which NVMe device we want to use
(PCI BDF identifier)
- how to name it in SPDK nvme bdev configuration
- how many splits or lvol bdevs to create on this device
- which VMs should use created bdevs
With CPU mask configuration file this allows to better
control resources when running the test (especially in
case of NUMA optimization where using sequential for/while
loops is not a good approach).
vm_count and max_disks parameters removed. These are not
needed anymore as they're controlled by config file.
Example of config file contents:
(BDF,Spdk NvmeBdev name,Split count,VM list)
0000:1b:00.0,Nvme1,2,2 3
0000:89:00.0,Nvme3,4,4 5 6 7
Change-Id: I9fc73458825d8072537aa04880765a048e034ce4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464565
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Vhost nightly test fails on Error: Partition have been written, but
we have been unable to inform the kernel of the change, probably
because it/they are in use.
Closes#1090
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iafd051e02b3dd32ede8a62c69c7079a0facade0c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476639
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In patch fdc82d3 'vm_run $@' was changed to 'vm_run "$@"' but
arguments like 'vm_run "0 1"' should be passed as
'vm_run 0 1'.
Change-Id: I2a51a31fc0b0b55079963b11587be55d9bf86a87
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Met error "touch: cannot touch './timing.txt': No such file or
directory" when running vhost_test.sh. For the working directory
is removed in "vhost_kill 0", And then "timing_exit clean_vhost"
will fail to touch timing.txt in the removed directory.
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: I2d0818b1228ebfd6767c258a0f4c1fbbfc728016
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This test suite was doing some things as far as formatting that are
covered by the run_test framework. Also, the way the tet cases were
organized was obfuscating which migration tests are actually being run
in the autotest jobs. This configuration makes it a lot easier to
manage.
As a side note, migration-tc3a.sh and migration-tc3b are not referenced
anywhere in the test scripts. They may be extraneous.
Change-Id: Ibe6782b38cb87c90b2bc61f112f10cd35f5b4a44
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
apparently getopt used $i when iterating over variables because when
weuse --force and don't set i ourselves, bash throws errors that look
like "line 594: [[: --test-cases=1,2: attempted assignment to
non-variable (error token is "=1,2")".
Change-Id: I89937f1cdd3d3c0557c931a11707df17c7b8d87e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The shell_Restore_x variable and xtrace_restore were attempting to
accomplish the exact same thing. However, when assigning
shell_restore_x, if -x was not set, then the assignment would result in
an error causing the scripts to fail.
So just get rid of that variable entirely and replace it with the more
robust xtrace_disable, xtrace_restore mechanism.
Change-Id: Ic823ad8433bd3dc181aaa0930297cd9d74bcf528
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477966
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use env variables to select custom qemu-img and qemu-system-x86_64
binaries. This is needed to test versus latest Qemu versions from
Github.
If env variable QEMU_BIN is not present then the defaults for test
are system-wide installed packages.
This partly reverts changes done in patch:
5502294d76
which removed possibility to run with custom Qemu binaries.
Change-Id: I8138a079ba7013dcd97aad95ae2eed6417f5b18c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477776
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will allow us to use timing_enter and timing_exit directly
inside the run_test function. That function already lends itself well to
nesting the way we do our timing.
This patch series is aimed at combining the timing_*, run_test, and
report_test_completions calls all into a single place. This will greatly
reduce the number of lines of code in our bash scripts devoted to
tracking timing, formatting, and test completion. It will also enable us
to expand on the reporting of test completions. Further down the line,
this will also allow us to unify test case documentation.
Change-Id: I8e1f4bcea86b2c3b88cc6e42339c57dfce4d58f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.sh script is never used for vhost performance testing.
There are separate test scripts created just for this purpose.
Change-Id: I55e9b8c0d53100d1ce8077cf1758590bbe971dee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Correct shellcheck rule SC2012: Use find instead of ls to better handle non-alphanumeric filenames
Change-Id: Ibfc54ac06ae4cecadd22954159d259295f99912f
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Edited config file is loaded in test via rpc.py
load_config. Because of that, each parameter is
sent "as-is" from config file, as opposed to using
rpc.py bdev_create_raid which would cause argparse to
convert all params to desired type.
Commit 445e667 changed raid_level to enum while this
config file still used int which caused nightly tests
to fail.
Change-Id: I729c7263261c73e255ab2e6071f76219a351cb19
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473565
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Correct shellcheck rule SC2140: Word is on the form "A"B"C"
(B indicated). Did you mean "ABC" or "A\"B\"C"?
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1655b2e76be7a5e3d615c5b34c5af9e4012ac49f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Corrected code in some files.
Most of cases cannot be corrected as we use global variables
defined in other files.
SC2154: var is referenced but not assigned.
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Change-Id: Id333587f81b0bc2456b0c97bac5343a8e5a22774
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
