Also rename transport request and controller variables
with "vu_" prefix.
The consolidated function will be used in coming patch.
Change-Id: I5219c13d7089dfdaea4a54e0b15cc5e6ecf2eb16
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the maps are unique to modules, they can store the group_impls
directly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7f11db558e38e940267fdf6eaacbe515334391c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows for different policies per module, as well as overlapped
placement_id values.
Change-Id: I0a9c83e68d22733d81f005eb054a4c5f236f88d9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the qpair is part of a poll group, the socket will get
flushed as part of polling that group already. We only need
to explicitly flush to handle the case where the qpair is
not in a poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2a510b6d26d1622950437d81e0a40f6b15d6b54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
There was a fix for this that went into the posix layer, but the
underlying problem is the logic in the nvme/tcp transport. Attempt to
fix that instead.
Change-Id: I04dd850bb201641d441c8c1f88c7bb8ba1d09e58
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6751
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Logs are all changed to DEBUGLOG. If you compiles non-debug mode.
Gcc reports error. Using #ifdef DEBUG to exclude them.
Fixes#1903
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idcaf083e430a77845fbd8443acade4b3f0e1efc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Even if the operation is deferred, null it out if it reported success.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3cc9eaa88bdd7a2e7d13790782f4a9b0966e5585
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some iSCSI initiators send a Data-OUT PDU sequence whose PDUs do
not have block size multiples data.
SPDK iSCSI target had replied SCSI write error to such initiators
because previously we had sent a write subtask per Data-OUT PDU.
SPDK SCSI library had rejected the write subtask because its data
was not block size multiples.
This patch fixes the issue.
The idea is to aggregate multiple Data-OUT PDUs into a single write
subtask up to 64KB or until F bit is set. MaxRecvDataSegmentLength
is 64KB but MaxBurstLength is 1MB. Hence one Data-OUT PDU data may
be split into multiple data buffers, but the maximum number of split
is two.
When processing the data segment of the Data-OUT PDU, save the data
buffer of the current PDU to the current task if the data buffer is
not full and F bit is not set. In this case, write subtask is not
submitted.
When processing the header of the Data-OUT PDU, if the current task
saves the data buffer from the last Data-OUT PDU, it passes the data
buffer to the Data-OUT PDU.
When reading the data segment of the current PDU, attach the second
data buffer to the current PDU if the first data buffer becomes full.
These are enabled only if DIF is disabled.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9cfb53fe8c0807a63e58c61bed3bb52f60f4830
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6439
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It can divide to two parts:
1, UIO driver - sigbus error handling and uevent
process.
2, VFIO - request notify handling.
sigbus error process is in previous patch.
Change-Id: Idc09754b83ae9ddcaea1f2afcbc13e528ead9863
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct sockaddr_nl {
sa_family_t nl_family; /* AF_NETLINK */
unsigned short nl_pad; /* Zero */
pid_t nl_pid; /* Port ID */
__u32 nl_groups; /* Multicast groups mask */
};
nl_pid is the unicast address of netlink socket. It's always 0
if the destination is in the kernel. For a user-space process,
nl_pid is usually the PID of the process owning the destination
socket. However, nl_pid identifies a netlink socket, not a
process. If a process owns several netlink sockets, then nl_pid
can be equal to the process ID only for at most one socket.
There are two ways to assign nl_pid to a netlink socket. If the
application sets nl_pid before calling bind(), then it is up to
the application to make sure that nl_pid is unique. If the
application sets it to 0, the kernel takes care of assigning it.
The kernel assigns the process ID to the first netlink socket the
process opens and assigns a unique nl_pid to every netlink socket
that the process subsequently creates.
Change-Id: Ic0688228105ea6ba4ebae1d130b9271126c37b0e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the sigbus handler to virtio pci device
such as virtio_blk and virtio_scsi.
Change-Id: I07f2f175a585a425ef14050e2bf83bacb6e4c3bc
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the case that reactor is needed to be valid, add an
explicit assert there.
Change-Id: Ic47030d50a6a940ddf87a3744bae38c94dd7252e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This makes it possible to traverse from the group_impl to
the group. It hasn't been necessary so far but will be in an
upcoming change.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2bf119461bfd5ac5c8a63a3f1f4560d32e695c75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Individual modules will need to mantain their own placement maps for
this to work correctly, especially if modules have different algorithms.
This is a step toward allowing them to do that.
Change-Id: Ie798baa50b94f1e99d6690adb606b936c7b30da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a step toward allowing for multiple maps. Each module may have a
different meaning for placement_id with different uniqueness rules. They
can't all be in the same map.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I608680a08b947a5d5c0818ff66505ed64e1b891e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Instead, move it down to the modules. This allows modules
to potentially change the value, if they are able.
Change-Id: I08f5fbadf5d1e96b489ddaaca72aa051ce2cb85c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7212
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are a small, bounded set of placement_ids that the socket layer
will ever encounter, and they remain valid for the lifetime of the
program. The association between a poll group and a placement_id is now
correctly broken when the reference count drops to 0 (in response to
sock_map_release calls), so do not free the entry when the poll group is
destroyed so that it may be reused again.
Change-Id: Iad90e2da7d0860fa8c5cff24f9699bef30cd7bc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7210
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow the map to have entries with a valid placement_id, but no group.
This will be useful later when the order of placement_id discovery and
group assignment may be reversed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia39adb3a030135940aeb9eeadf9df78056e59c0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can return error status when processing RELEASE2 without
a reservation, also add a UT to cover this case.
Fix issue #1898.
Change-Id: I56ffa8eabfc0409307500f8740cb627aab9d2f0b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit aaac48880d.
This patch was showing issues with SPDK vhost mappings
when handling larger numbers of VMs.
Fixes issue #1901.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81bd311d26037dcb9340d85abcb4ea45b20a5170
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7424
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I2e47b148209ce4c232dbdc5f20c90548be995e1a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7334
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will ensure that we can't exceed the iovcnt when parse
NVMe PRP list to req->iov.
Also comment that the iovcnt in vfio-user transport is used to track
each gpa_to_vva map, for NVMe PRP list command, the PRP2 itself also
will use one entry, so we need add one more entry for this case.
Fix issue #1864.
Change-Id: I06c7137e2c4637c9501f82a9eb1c8e4395d819cd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7264
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For NVMe backend device, we should use vtophys to calculate
physical address when doing DMA from/to VM to drives.
Fix#1822.
Change-Id: Ib8fbc371e19e77a20202d408340e7d65644b1eeb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7261
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we poll the MMIO callbacks in the context of ADMIN queue's
poll group, here we do some improvement to start a poller to do MMIO
poll, then the group poll will only process NVMe commands while the
MMIO poller will process MMIO access.
This is useful when doing live migration, because the migration region
defined by VFIO is a BAR region, we should stop polling queue pairs
but ack the MMIO accesses during the live migration.
Change-Id: I63bac44889cbe0c31d47599810aab8335dfd4ff5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7251
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Just code movement for the coming patch.
Change-Id: I7e844bc27a037e086796f9659351f20cdbb517fb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7333
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to update the field definition related with
work queue in the header file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I68b81d9dfc2497db89e96f0730785be03dcb8add
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
NVME_MAX_PRP_LIST_ENTRIES has changed over time, so let's
just remove the reference to the exact value here. Also
explain a bit more why the max size isn't
(NUM_ENTRIES + 1) * page_size.
While here, do a small whitespace cleanup as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib75813788abdd3dbb43192f9fdc27f99b33aeadf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_poll_group_remove_subsystem_msg() disconnects all
qpairs associated with controllers in the specified
subsystem. If it finds any controllers that need to
be disconnected, it sends a message to the running
thread to execute the same function again later.
But when it runs again later, the qpair may no longer
be in the poll group, but there could still be
outstanding messages being sent between threads. For
example, _nvmf_qpair_destroy() needs to send a message
to the ctrlr->thread to clear the qpair mask bit.
All of this could result in the nvmf target starting
to destroy poll groups prematurely. Destroy poll
groups results in the nvmf spdk_threads exiting. If
there are still messages being processed from
the STOP_SUBSYSTEMS target state, we can get
use-after-free errors since processing of those
messages could access freed memory associated with
the exited thread.
Fixes issue #1850.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e63b9addb2956495a69b5108a41e029f6f9a85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7275
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This include isn't needed in queue_extras.h itself.
There were a few places that were implicitly
depending on this include, so fix those to include
util.h explicitly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia962ae5a4403ee8ae15f3106d0d5e7d7412a4535
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new 2 API function allow to get and free stats
per poll group. New function to get transport name
have been added to report not only transport type but
also the name.
For now only RDMA transport reports statistics,
other transports will be added later.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2824cb474fde5fa859cf8196dabac2c48c05709c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6299
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New statistics include number of poller calls,
number of idle polls and total number of completions.
These statistics allow to estimate % of idle polls
and the number of completions per poll.
Since nvme_rdma_cq_process_completions function
returns number of completed NVMF requests and each
NVMF request consumes 2 RDMA completions (send+recv),
this function was extended to return the number of
RDMA completions.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifdc1e2e467f645adb5d66d39ff2a379e161fbd77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6298
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These statistics allow to estimate WRs batching
efficiency. The number of send WRs equals the total
number of submitted NVME commands.
Change-Id: I96c9836cd6b9070cf5f62e43b4d2738506866e94
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although currently acking msg_fd inside function
msg_queue_run_batch() will also ack critical_msg's
notification, it is easier to understand the code
if moving acking msg_fd code into
thread_interrupt_msg_process().
Change-Id: I98267c5c28358334a2c1133e3dbc125788de77ab
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As a start of combining interrupt ability into poller,
it aims to get spdk_thread & spdk_poller runnable between
poll mode and interrupt mode with dynamic switching.
spdk_interrupt_mode_is_enabled() indicate whether interrupt
mode is enabled and dynamic switching is permitted. So
spdk_interrupt_mode_is_enabled==true leads to set up
interrupt mode related resources;
in_interrupt flag indicates whether one spdk_thread now
is running in intr mode.
It is possible that spdk_interrupt_mode_is_enabled==true
but in_interrupt==false. this means spdk_thread & spdk_poller
switched to poll mode from interrupt mode due to heavy
workload coming.
To align with spdk_reactor, use "in_interrupt" to
indicate whether one spdk_thread now runs in intr.
Change-Id: I2cd806bf4dec9969f3df88fac7f6b0c0b716d907
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Restrict spdk_interrupt_mode_enable must be called
once prior to initializing the threading library.
Change-Id: I833ff63fae19882e82154195d03dd7ce56ffb1de
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be helpful to simplify the upcoming change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1f170fe48d2ec1b5ea05da6a8aa3589060c5c32d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6438
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use current_data_offset of task to track the current offset of
large write I/O by following the last patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iec3a371c6050fe11478b6f158259d8f4013f5238
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Custom transport may not provide the `qpair_abort_request`
callback function, so here for transport API we will just
call it when it's not empty. We will add the callback
support with vfio-user in another patch.
Fix#1883.
Change-Id: Icd82a26bde4ed90068bc85ee04cce9642cb6135d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7291
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used the controller ready field to indicate ADMIN queue connection,
but the accept poller and ADMIN poll group may run in different
threads, this may lead vfu_attach_ctx() be called several times, so
change the 'ready' to true when a new socket connection is created.
Fix issue #1854.
Change-Id: Iab6ffd6dffb3fff5cf893e79774bc28fe0b2830c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7073
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make the code easier to understand.
Change-Id: I7112d3fd5f0d6dce9b66d44375b68ce7d1e8951d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7072
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
unmap_q is only be called in unmap_qp, so remove this function to make the
code more clear to read.
Change-Id: I627c7a1efdcb85476cb618fced8b0bfc2d8f1f62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6886
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When killing QEMU or remote client is terminated normally,
we can release current controller related data structure,
users may restart QEMU to connect the same socket file
again, for the new connection, vfio-user will create
a new controller data structure for it.
Here we add a lock in the endpoint data structure to protect
number of connected queue pairs variable, because controller
data structure is like a session, while endpoint is related
with the socket file, so it's safe here. Moreover, we can
use this lock to protect live migration related data
structures in future.
Change-Id: Ie7060041a253604e7a2242813ec284eae46fe4e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6862
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single SCSI write up to 64KB. Any variable to accumulate data length
is necessary.
Hence add data_len to mobj and accumulate read data length into
mobj->data_len, and then refer mobj instead of pdu->data and
pdu->data_segment_len to submit write subtask.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6354534769e67c0fd995bbc3c2b4a80d21a23915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wrap an operation to get a data buffer from mempool into a helper
function iscsi_datapool_get() and wrap an operation to put a data
buffer to mempool into a helper function iscsi_data_pool_put().
Use inline for both functions.
Besides, as a minor fix, remove duplicated file inclusion between
iscsi.c and iscsi.h.
7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3005dffaa93a6bca16f19bb467fb5b64ae1aad2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add crc32c to struct spdk_iscsi_pdu and initialize it by SPDK_CRC32C_INITIAL,
and then use it as the initial value of _iscsi_pdu_calc_data_digest().
Separate finalization of crc32c into _iscsi_pdu_finalize_data_digest().
Move the definition of related macro constants from iscsi.c to iscsi.h.
iscsi_pdu_calc_data_digest() is used for read too. So setting
pdu->valid_data_bytes before calling iscsi_pdu_calc_data_digest()
for read.
Data split will be supported only if DIF is disabled, and hence
DIF case is not changed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d24f605fd0d452782e17695b613cd2f63d2e42f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can be handled in a cleaner way by having the sock group
create/close operations take an extra reference.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id701b6dd9a19b01cd40e0d95eb870aef977eea99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
added to a group
The process of adding a socket to a group may, in some scenarios, change
the placement id.
Change-Id: I879d9641099d86978ede5d5e2be1a72eda65a79b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Using nvmf_tcp_destroy() would destroy ttransport->lock, which hasn't
been initialized by that point yet.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie9ced97ef520236dddaa70453b6807e8382ce534
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7235
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a request is submitted, it may have incorrect iov
alignment that doesn't fit PRP requirements. In the
current version an internal function fails such a request
and returns a NULL pointer. This is mapped to -ENOMEM
error which is returned to generic bdev layer where
such a request is queued in a "nomem_io" queue and
later can be resubmitted. That is incorrect and such
a request must be completed immediately. To fail the
request, we need to differentiate between -ENOMEM and
other cases, so we pass a pointer to a result to
local nvme functions
Change-Id: I7120d49114d801497a71fca5a23b172732d088de
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7036
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used the next patch, current
behaviour remains unchanged
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie74c7395f67a08b0cac018eb5114f358a6b583cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The max_io_size transport option should be a power of 2 and be >= 8KB.
Max data tranfer size is defined in NVMe-oF spec as 2^(mdts cmd field) * 4KB.
Mdts cmd field is calculated as spdk_u32log2(transport->opts.max_io_size / 4096),
so max_io_size < 8KB results in mdts=0, which means no size limit (according to spec).
User can set max_io_size = 0 explicitly to allow no size limit.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: Id88a77efce5f217e1fc7750f61c0bd330aaa3791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6384
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The dbdf format is xxxx:xx:xx.x and with the wrong
format the rte_devargs_parse always fails.
Change-Id: Ia34bc5e68f6401bb25907d5d07c65636b4f491b5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We can send a message to repeat subsystem pause
and free a context that will be used later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia5e8b0ff43f5e38bd8e659a8a64d42926e1d3c6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6661
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Actually we already do this when removeing a memory region, but
the check for it is too strict, we should unmap queue pairs when
the queue pair is in the memory region.
Change-Id: Ia646a0255e32ecdd0a70537a8011ce622eb59195
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6861
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The error response should be processed at the beginning of this
function.
Change-Id: Id583951c82981cf58984ab68b23ad6f7ea80cd3f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6859
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When starting VM, there are error logs such as:
vfio_user.c: 510:acq_map: *ERROR*: Map ACQ failed, ACQ 3ffde000, errno -1
vfio_user.c:1043:map_admin_queue: *ERROR*: /var/run/muser/domain/muser1/1: failed to map CQ0: -1
vfio_user.c:1103:memory_region_add_cb: *NOTICE*: Failed to map SQID 1 0x3ffd8000-0x3ffdc000, will try again in next poll
This isn't the error case, because when the Guest memory hot add/remove from QEMU, vfio-user
target will stop and unmap all queue pairs and remap them again, so let's use a more friendly
log instead.
Also use a notice log when adding listener.
Change-Id: Iaa4dc29e02523b5e85ec716d200ec355f8a575ed
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6650
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Although the value stored to 'rc' is used in the enclosing
expression, the value is never actually read from 'rc'
Fixes#1860
Change-Id: Id1001552e635968e373cad0fd27d7bda41d887cd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7082
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When param len > 0, param data must not be NULL.
So we add a comment to make it clearer.
Change-Id: I053c3e45ddb8fa23fb67ce899d32dadd8e286946
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the polling group check. Because at this moment,
the qpair is not added into a polling group. If we do
not remove it, we will never enable zcopy feature for
I/O qpair.
And in sock implementmentation, we already fixed the zero copy
handling if a socket is not in a polling group. See
posix_sock_flush function. So we can fix this issue if we directly
remove this check.
Reported by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I969936c4b6c7f13cbfa4d6eb479010c53f3e384a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add print to confirm how groups/queues/engines are being
programmed based on the init RPC used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic9462c19c6899478a803433f90d9db9249dd5ca1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK has added APIs for registering externally allocated
memory regions. Use them instead of doing our own thing.
We have to postpone spdk_mem_unregister call in
memory_hotplug_cb() because SPDK mutex (g_spdk_mem_map_mutex)
and DPDK mutex (memory_hotplug_lock) may overlap
and cause deadlock when one thread is calling spdk_free()
(locks memory_hotplug_lock first and then tries to lock
g_spdk_mem_map_mutex) and another one is calling
vhost_session_mem_unregister() (locks g_spdk_mem_map_mutex
first and then tries to lock memory_hotplug_lock).
Change-Id: I547b4ffc3987ef088a1b659addba1456ad760a71
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3560
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: The default value of placement_id in spdk_sock
should be set to -1 in spdk_sock_connect_ext. If we still let it to 0 and call
sock_get_placement_id for the spdk socket used in the initiator side,
we will never get the correct placement_id when enable_placement_id configuration
is configured, because we will always get placement_id = 0
instead. And the same comments in spdk_sock_accept function.
And this patch also change the judgement of placement_id in other related places.
PS: Why we need to explictly set default placement_id = -1, because when use
"enable_placement_id=2" for the socket, placment_id=0 is a valid value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9fcc3a1c6a5007c22d11da5aeed0022577652a76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
nvmf_subsystem_remove_listener RPC handler may fail to remove
the listener (e.g. it doesn't exist) but in eror case we
spdk_nvmf_transport_stop_listen_async and send an error
response. In a completion callback passed to
spdk_nvmf_transport_stop_listen_async we try to send a
response again but the response handler had already been
released and we dereference a NULL pointer.
The fix is to skip spdk_nvmf_transport_stop_listen_async
in error case and continue with the subsystem resuming.
Fixes github issue #1821
Change-Id: I8d96b943cca25d9f95d19e8ea600242f019e6b21
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6699
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Updating thread stat directly in spdk_thread_poll()
will cover the time spend in msg process in interrupt
mode.
Change-Id: I9b71790281f10fb784ef4fd4059c41438bbaabac
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
thread_interrupt_msg_process is registered to thread's
fd_group, so it will be called inside spdk_thread_poll.
Since spdk_thread_poll will set/restore tls_thread,
there is no need to set or restore it again here.
Change-Id: Ida10c736ef904ff975eeb42fd0cccad9fd8317cf
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When we iterate qpairs that belong to a subsystem
and try to disconnect them, there is a chance that
some qpair can be disconnected on transport level,
e.g. the initiator may receive a disconnect for
the first qpair and disconnect others. That may lead
to a dead loop when we call spdk_nvmf_qpair_disconnect
with a callback, the callback is called immediatelly
and tries to disconnect the qpair again.
To solve this problem, move part of nvmf_poll_group_remove_subsystem
function to another function nvmf_poll_group_remove_subsystem_msg
which disconnects all qpair at once without any callback
and calls itself via thread_send_msg untill all qpairs are
disconnected.
Fixes github issue #1780
Change-Id: I1000cda73e6164917fc13f7f374366af90571b99
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refactors the way nvmf_get_stats RPC works.
The RPC layer passes JSON write context to custom dump function defined within transport ops.
The RPC layer no longer needs to know the structure of transport poll group statictics.
Functions and structures used in the previous flow have been deprecated and will be removed.
JSON returned for RDMA transport should be the same as before this change.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I03308c45be120793d316bf79814a1295afd9fb95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6681
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvmf_tgt_listen() is deprecated, so moved
the remaining instance to spdk_nvmf_tgt_listen_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I32b54e99f83fa10f1074f80aad82bb0608c9ae11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6630
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This patch refactor the pdu sending logic with the async manner,
then if the group contains the accel engine, we can use it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2d669c0a3255d7a8898441e406906add2f3a3556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is invalid to try to delete a NULL qpair, so do
not check for it in nvme_tcp_ctrlr_delete_io_qpair and
return an error when NULL. Just change it to an
assert instead. This makes it consistent with pcie
and rdma.
While here, add an assert in rdma as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2f76deecb21b78749dac85e33fb1fa0d14a1239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These three goto cases are using device->fd,
so put them in cleanup, it has no impact on
vfio_user_dev_setup failed.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I28028dda2977cf8158e703afa5b8af38c48f3d85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible that nbd pthread is created but not executed,
then spdk_nbd_stop is call before nbd_pthread's execution,
but nbd pthread starts to execute while nbd is totally stopped.
This patch can get spdk_stop_nbd aligned with nbd pthread.
Change-Id: I57cc92b94d36cd706616c9058134f716f0812892
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is better naming to represent their usage.
retry_poller and count can also be used to do
async nbd_stop procedure in the following patch.
Change-Id: Ie5a74e4add3f1a6c7257df00aded8b5d52a09955
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This statistic is incremented when we don't reap
anything from the CQ. Together with the total number
of polls it can be useful to estimate idle percentage.
Change-Id: I61b51d049b0bc506fb8a896e225187e46e75a564
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6295
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The shadow registers need to be zero when the qpair is
created. This happens automatically when a given qid
is used for the first time, since the page is allocated
with zmalloc. But if a qid is reused, we need to make
sure its shadow registers are cleared *before* we create
the qpair again with the same qid.
So clear the registers in nvme_pcie_ctrlr_delete_io_qpair,
just after the cq is deleted.
Fixes issue #1795.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c30d1ea248559a01b802cd132dd57199b491b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the iov_len is 0, it is OK for the iov_base to be
NULL.
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I45c9be68fc2975bf2abd91a9d77935ce516c5210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6706
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Previously we only process Read/Write/Flush IO commands, we should
not block the DSM command in vfio-user layer if the backend block
device can support it.
Change-Id: Ia6b90397adcc36015f331f011a5bdf3e3d6562d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6525
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
max_delay_us was deprecated in SPDK 19.04.
config_file was deprecated in SPDK 20.10.
master_core/pci_blacklist/pci_whitelist were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8be4c347de58044a7c3d5b1329d96e47ce084b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the callback parameter for this function is NULL, this will
cause segment fault, so pass the correct parameter here.
Fix#1817
Change-Id: Ie768b7bf4a72862d16a44742ab3032803d0939a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Can not remove device in the remove event
callback as we can not unregister the remove
callback. So use the alarm_set to fix this issue.
Fixes#1809
Change-Id: Ib86bc4eeecc0fe2bc51538e28684d015405e8835
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6553
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
nvmf_create_transport rpc parameter to configure the CQ size helps
if the user is aware of CQ size needed as iWARP doesn't support CQ resize.
Fixes issue #1747
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: Ia9ba2b5f612993be27ebfa3455fb4fefd80ae738
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6495
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
iSCSI library had used goto label to consolidate iscsi_reject()
calls but calling iscsi_reject() in return statements will be simpler
and easier to read. This patch series focuses on Data-OUT PDU processing,
and so change goto label to function call in return statements for
Data-OUT PDU first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f30aff764820aab87233ea8cf22263611591a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spec does not disallow TEXT PDUs with no data. In that
case, just return immediately from iscsi_parse_params.
This avoids a NULL pointer dereference with a TEXT PDU that has
no data, but CONTINUE flag is set.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2605293daf171633a45132d7b5532fdfc9128aff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
instead appending to output file (which occurs on each make execution)
sed is used to modify `Requires` section of the *.pc file
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1a8cb1ec35bf583293c7174a413302191bbbd735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6460
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These statistics can help to estimate efficiency of
Work Requests batching and show busy/idle polls ratio.
Send: the doorbell updates statistics for verbs
provider are incremented per each ibv_post_send call,
for mlx5_dv per each ibv_wr_complete call.
Recv: the doorbell updates statistics for both
providers are updated when either ibv_post_recv
or ibv_post_srq_recv functions are called.
Each qpair on initialization accepts an optional
pointer to shared statistics (nvmf/nvme poll groups).
If the pointer to statistics is not provided then
qpair allocates its own structure. That is done
to support cases when NVME RDMA initiator doesn't
use poll groups, so we can avoid checks that qpair
has statistics in IO path
Change-Id: I07dea603cb870b85ea23c42e8e2c4520b1c66252
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6293
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change follows the large read which submits only subtasks, and
simplifies large write cases.
Associate the PDU which sends a SCSI Write PDU with immediate data
with both the primary task and the first secondary task. Then stop
incrementing reference count of the primary task twice.
As same as the last patch, copy the failure status directly among
the primary task and the secondary tasks because the primary task
is not submitted now. Then remove related data from struct
spdk_iscsi_task and related helper functions from conn.c.
Finally simplify unit tests for process_non_read_task_completion().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54aa38c9b9fb7d7352da040dcdd8bcc1b1756a83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following nvme controller statemachine states:
NVME_CTRLR_STATE_IDENTIFY_NS
NVME_CTRLR_STATE_IDENTIFY_ID_DESCS
NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC
The statemachine can either:
- Jump to succeeding state
- If active ns list is empty, jump directly to NVME_CTRLR_STATE_CONFIGURE_AER
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
Simply this such that we either:
- Jump to succeeding state
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
This will help to reduce the complexity of the nvme controller statemachine,
especially considering that there are new additional states
(NVME_CTRLR_STATE_IDENTIFY_NS_DIRECTIVE and
NVME_CTRLR_STATE_CONFIGURE_NS_STREAMS) currently on review that would continue
with the bad habit of having three possible jump states instead of just two.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I3242052b1108afcd8adbe6d0378b1358fef58ec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6521
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bus_pci depends on pci so it shall be listed before, otherwise it can
result in linking issue e.g.
/usr/bin/ld: /home/jkalwas/spdk/dpdk/build/lib/librte_bus_pci.a(bus_pci_pci_common.c.o): in function `pci_parse':
pci_common.c:(.text+0x6e): undefined reference to `rte_pci_addr_parse'
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idff446df82c37844edc122d5171e8ffa684b296f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6404
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To get the optimal group, we need the socket information.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I17b048a402fbf002307dd225f64b20a9f876d642
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This patch is used to leverage accelerated engine to compute
the data digest in the following case:
1 DIF is not used.
2 The data to compute is aligned with size 4, i.e, %4 = 0.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I51fb6e3ab04391062b244cba6e249c8e20d3180f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6014
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added the chained crc32 support API for both batched
and non batched mode usage. And also update the accel_perf
program in order to use the revised accelerated crc32 function.
For example, you can use the following command:
./build/examples/accel_perf -C 4 -q 128 -o 4096 -t 5 -w crc32c -y
In this command, "-C 4" means that caculate the chained
crc32 for an iov array.
(even if you do not have the accelerated DSA hardware)
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifede26f9040980b5791da8e5afef41177eede9f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For a SGL using PRPs, there is always an alignment check of the start
address in the beginning of the loop. This is stored in start_valid.
If the start is indeed valid, we might fetch a new SGE,
and then perform a second alignment check on this new SGE.
However, this second alignment check is done unconditionally,
meaning that for the last SGE in a request, we check if the
same start address is aligned twice.
Only perform the second alignment check if we actually fetched
a new SGE.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9df8038c650b0879f838d1d9d895e8dd7172840d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6493
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The statement causes this issue is:
assert(group_impl->num_removed_socks < MAX_EVENTS_PER_POLL);
The call trace is:
The previous solution is:
commitid with: e71e81b631
But with this solution, it will always add the sock
into the removed_socks list even if it is not under polling
context by sock_group_impl_poll_count. So it will exceed the size of
removed_socks array if sock_group_impl_poll_count function will not be
called. And we should not use a large array, because it is just a workaround,
it just hides the bug.
So our current solution is:
1 Remove the code in sock layer, i.e., rollback the commit
e71e81b631. This patch is
not the right fix. The sock->cb_fn's NULL pointer case is
caused by the cb_fn of write operation (if the
spdk_sock_group_remove_sock is inside the cb_fn). And it is not
caused by the epoll related cache issue described in commit
"e7181.." commit, but caused by the following situation:
(1)The socket's cb_fn is set to NULL which is caused by
spdk_sock_group_remove_sock by the socket itself
inside a call back function from a write operation.
(2) And the socket is already in the pending_recv list. It is
not caused by the epoll event issue, e.g., socket A changes Socket B's
cb_fn. By the way, A socket A should never remove a socket B from a polling group.
If it really does it, it should use spdk_thread_sendmsg to make sure
it happens in the next round.
2 Add the code check in each posix, uring implementation module.
If sock->cb_fn is NULL, we will not return the socket to the active socks list.
And this is enough to address the issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I79187f2f1301c819c46a5c3bdd84372f75534f2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6472
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of max active zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia09e3db157ca0afadbd3ca4032eedd7bcd88248c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a function to get the number of max open zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4223146bc1ddf90486892a0af5fe5ce006dc5fd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6442
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch provides two new accelerated crc32c function interface.
And the next patch will be used to add the real support of chained crc32c feature.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3f8dd55c3da636e29e5fb02fc229b51f05653cd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6456
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When read is split, only secondary tasks are submitted. Hence we can
copy the failure status directly among secondary tasks and primary
task now.
Additionally, improve the comment in the source code to make us easier
to understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I857711dfaf90515231048f8c31c9273eac854d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6343
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will make the current code simpler and make the following changes easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5a06f7e876fee03ed05d880525b594f92cadcdca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6410
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
data_buf was duplicated with data and was not necessary. Hence
remove it and use data instead in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I207047ce73d938f83e39f1454d44a9e4bba6b2f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6407
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch follows the last cleanup.
Factor out reading PDU payload operation from iscsi_read_pdu() into a
helper function iscsi_pdu_payload_read(). This reduces the nesting
level, improves the readability, and make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5f51eedefe00f3b43a7b45dcf84be79f8df4e27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6414
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
