This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bug introduced when some fixes for DPDK 19.02 were added.
Fixes#659
Change-Id: I5ef9ce6a5e30591fc7d2aeaa8d398effe42888f6
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
DPDK 19.02 requires this mempool to be allocated via
crypto-specific function which returns rte_mempool.
To keep the amount of #ifs minimal, we'll use rte_mempool
unconditionally.
Change-Id: I3a09de41e237e168580bb92b574854e291e68a74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those were added to allow us mocking DPDK functions
originaly defined as static inline. They are based on
a fixed DPDK version and currently require a lot of
effort to update for DPDK 19.02+. There's a different
way of mocking them:
> #define rte_crypto_op_bulk_alloc mock_rte_crypto_op_bulk_alloc
> static inline unsigned mock_rte_crypto_op_bulk_alloc() { ... }
This patch uses the above method to mock all static
inline functions before including the crypto source file
in crypto_ut. As a result we can get rid of the rte_
header copies from SPDK, which greatly reduces the
effort required to make crypto_ut work with DPDK 19.02.
Change-Id: I0f07a9ff4f1c63036e058dffd3fcf0c21e77bff3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next patch we'll e.g. move the vbdev_crypto.c
include after some of those functions, so move them
to the very top of the file now.
Change-Id: I1abaf724ea10c8c6d461663ba3be0a5a37b34f4e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are allocated and freed inside the
test suite, but aren't used for anything.
Change-Id: I341dc3315d20d15f7b571e9d18438c98a74def11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is intended to avoid a crypto failure when we have ASAN disabled.
In order to appease a scan-build error, we have to assert that the
memory address for two g_io_ctx->cry_iov.iov_base is different between
runs of _crypto_operation_complete. However, when we have asan disabled,
two subsequest calls to spdk_dma_malloc yield the same address, so
change the alignment to prevent allocating the same address.
Change-Id: Ia3dfbec5bb16d00bbe7dc136a886e0b9caea71a7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442413
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is useful for proving to scan-build that we are not using a mocked
function. Sometimes it needs to be called repeatedly every time any mock
variables are called.
Change-Id: Id0ef196620c2984252f792a7e40162e10b989748
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
It is probably best to clear the pointers to global memory when those
pointers are no longer valid. It also helps make the unittest a little
bit clearer.
Change-Id: I73f9568f40ba8bff63f4e3346c83a48766f26129
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The scan-build error this fixes assumes that we do not reallocate an
iov_base for the g_bdev_io object in between calls to
_crypto_opration_complete. So I explicitly tell it that's what we are
doing.
Change-Id: Ie15c517ea60a2a527a0520005cb044ab2ba4412e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/437988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Initial implmentation had a 1:1 session to crypto op ratio. After
working with a similar concept in CompressDev checked to see if
this was required and apparently it is not.
Saves a decent number of API calls per crypto op and in the poller.
Also saves on mempool usage. Performance improvement measurement
is WIP.
Change-Id: I73f2355e720a16fd46bc4a02657419f779f07cbb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Previously there was no consideration for IO that were outstanding
to the crypto device when handling a reset. This patch makes sure
that those IO are completed with FAIL status prior to completing
the reset that we pass down the stack.
It does so by sending down the reset first and in the completion
using spdk_for_each_channel and the poller to quiesce each channel
allowing the crypto side to complete all IOs before we finally
complete the reset IO after the last channel is quiesced.
Resets are tracked on a per bdev basis.
Addresses github issue #449.
Change-Id: Iadb07bada1fcaad33d9f224a60d983a7eb835236
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
