The multiple reactors support for vfio-user was enabled recently,
and enable this tests in CI now.
Change-Id: I8e145f62c995f968298040b1c550c421a25a7c9f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Note, this change only sets defaults for the ID/KEY,
more specific use cases like NVMe/TCP may set the ID and KEY on a per connection basis.
Also simplify PSK identity string, that isn't NVMe focused.
NVMe libraries using this will need to construct more complicated
identity strings and pass them to the sock layer.
Example:
rpc.py sock_impl_set_options -i ssl --psk-key 4321DEADBEEF1234
rpc.py sock_impl_set_options -i ssl --psk-identity psk.spdk.io
./build/examples/perf --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
./build/examples/hello_sock --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
Change-Id: I1cb5b0b706bdeafbccbc71f8320bc8e2961cbb55
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13759
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These sleeps should not be required. The steps before them properly
wait.
Change-Id: Ifc278c582dbf8fd837ca7f1f02873789a4e616d6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can use the nvmf_get_stats RPC to directly count the number of
connections on each poll group.
Also, we cannot rely on knowing the exact algorithm that the driver will
use to assign connections to NAPI values. We can only know that the
number of unique NAPI values is AT MOST equal to the number of traffic
classes.
Fixes#2577
Change-Id: I6758fdcda752ff5372b1bc59984257b804ad0ea7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13833
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed vfio-user source branch for installing and testing.
Replaced vfio-user-dbfix branch with vfio-user-irqmask2 due
to the recent issue #2600.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ide525cdd3496c2a3dbecea4e44e6edff63438859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed to make sure tests use proper QEMU binary.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I868bf60b5480e6a258fbe067ec77d9af26f3a9c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13964
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ioccsz is specific for fabrics. spdk_nvme_ctrlr_is_fabrics() returns
true for custom fabrics transport. Hence we can use
spdk_nvme_ctrlr_is_fabrics() safely in nvme_ctrlr_update_nvmf_ioccsz().
Before this change, in the unit tests, ctrlr->trid.trtype was set to
zero at initialization. After this change, for most cases,
spdk_nvme_ctrlr_is_fabrics() should return false for most cases.
SPDK_NVME_TRANSPORT_PCIE did not work. Hence, initialize
ctrlr->trid.trtype by SPDK_NVME_TRANSPORT_CUSTOM_FABRICS instead.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4bedcab4a9f2876c1c9463ff10ad0966754f1713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13948
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Get a PD for the device from the PD pool managed by the RDMA provider
when creating a QP, and put the PD when destroying the PD.
By this change, PD is managed completely by the RDMA provider or the hooks.
nvme_rdma_ctrlr::pd was added long time ago but is not referenced
anywhere. Remove nvme_rdma_ctrlr::pd for cleanup and clarification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If8dc8ad011eed70149012128bd1b33f1a8b7b90b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
SPDK NVMe RDMA initiator used the default PD per RDMA device. Default PD
may be changed when all QPs for the RDMA device are destroyed and created
again.
For multipath, the RDMA zero copy feature require the PD per RDMA device
to be persistent when all QPs for the RDMA device are destroyed and
created again.
Maintain such persistent PDs in this patch.
Add two APIs, spdk_rdma_get_pd() and spdk_rdma_put_pd().
In each call of two APIs, synchronize RDMA device list with
rdma_get_devices().
Context may be deleted anytime by rdma-core. To avoid such deletion,
hold the returned array by rdma_get_devices().
RDMA device has PD, context, ref. count, and removed flag. If context
is missing in rdma_get_devices(), set the removed flag to true. Then,
if the ref count becomes zero, free the PD and the RDMA device.
The ref. count of a RDMA device is incremented when spdk_rdma_get_pd()
is called and decremented when spdk_rdma_put_pd() is called.
To simplify synchronization, sort the returned array by
rdma_get_devices().
To avoid resource leakage, add destructor function and free all PDs
and related data at termination.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I093cb4ec2c7d8432642edfbffa270797ccf3e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is causing too many intermittent failures, let's
disable for now while we continue to debug it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f1f1824b1aa57fe242a77f5d96c9301a2921824
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14001
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for the next few patches that will it back using a
different implmentation. For review purposes it will be much
easier to remove it first. The new implmentation will be nothing
like what was here before.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3d14e524751442bfd5f0ade87333d879137b5d05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This just verifies a modest setup.sh's output which is of little
relevance. On top of that, depending on the system's state, the
test itself may be flaky so get rid of it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Icc918a0dbbb54067c281aa465a097c4e40a32e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13827
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some occasions the total number of available hugepages increases
by the account of reserved and/or surplus hugepages allocated by the
kernel. This affects the test where it ends up with bigger number of
hugepages then actually requested via setup.sh.
Hugepages overcommitting is disabled under CI nodes, however, this
issue spontaneously appears regardless. To rectify, add the extra
hugepages while checking the expected number + some debug to see the
state of meminfo in case the test still fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If30a422240045ac188a9175eeab7210351eb34a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the default value, timeout might be too long to detect connection
failure by the end of the test. 512 milliseconds is too small to use
in production but is not so small for this case.
Fixes#2595
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9f1248b2812eb7625aa943878b022f0a151d4cbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13908
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. $bdevperf_pid is expanded when the trap is signalled,
hence it will always hold PID of the last value it got assigned to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I89083667e0be5f3f0b0fd1745bfbfb38cb340c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The contents of this file is not evaluated in any way, the test only
reads it back to stdout at different stages. Instead, just keep
bdevperf writing to std{out,err}.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibd0caa101e895661224f8a969395eb018ece19dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23b206b026dec0cb9e91226aa2ee2de91eebde6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0a9cd41f754f2d52a8caa936a7a7504b0091790d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Here "-m " is not used or related.
so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic8700bd0a262bb70b6116bbee86330eece5c03b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows e380263ba1 - all CI nodes have been updated to an image
which ships with that particular version of vfio-user QEMU.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2029f48014868366881790a4e258190e3f83b0d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13894
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parameter `num_queues` for virtio_scsi PCI device means
maximum number of queues, it SHOULD include the `eventq`
and `controlq`, while for `vhost_user` RPC call, it means
the number of IO queues, so here we use it as `max_queues`
in lib/virtio and add the fixed number queues for `vhost_user`
SCSI device.
Also fix `vhost_fuzz` to get `num_queues` earlier than
negotiate the feature bits.
Change-Id: I41b3da5e4b4dc37127befd414226ea6eafcd9ad0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has no control over how the interrupts work in the network stack.
SPDK can only group connections together based on their NAPI ID. So
remove this check from our tests. It's only going to result in
intermittent CI failures.
Change-Id: If8e6214b7d6c5aa4df99101612b98aa43d45b459
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are only called back-to-back and they're both configuring the
driver.
Change-Id: Icc07df1cf23d67954ac3621647b050d4c8c74e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
scope
Some of these names were hard to tell if they were common utilities or
ADQ test functions. Clarify the names.
Change-Id: If6998c3ea996ad6fef0a87a33c90d665c9accaa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case user sets --test-conf="" the pkgdep/git still forces
bpftrace installation under fedora35 and newer. Avoid this to
make sure user has a clear view on what's being installed (and
what not) in respect to defined cmdline arguments.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8b60fe9044d1ab593b3c1acaf1b40dde22acee2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13607
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses exisitng SPDK tests workflow for performing
series of tests for vfiouser subsystem on live QEMU instances.
For testing purposes it sends series of gRPC methods calls
that are serviced by the SMA and subsystems and then uses
the regular SPDK RPC interface to verify its effects on the application.
SSH connection to VM is used to verify that changes took place.
Signed-off-by: Milosz Linkiewicz <milosz.linkiewicz@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I38258c1a3f9ee3e457ef0426cdc6feff2f38d729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1f6f8bbe5f64bd281536ff30761fb7cf4bd046fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13787
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5baeaae98db79649bbd96f9fbe5a6dcffdf5cfda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13786
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
