Host connects to nvmf in multiple paths, that we can use
different ports on one nic to test this case.
Then this case can be tested on all machines even though they have only
one nic.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I021e2e1923361ecb4de1e260b2c277f7719f8335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3590
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the tests are skipped when using Soft-RoCE.
Test executed as part of run_test should never
skip a test, as it results in false assumption
that it was executed. See supplemental logs in CI output.
Before this patch bdevperf and srq_overwhelm (if executed),
resulted in misreporting this.
This patch moves all check for Soft-RoCE to top-level
nvmf test script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6d8941bbadaca2dbf8ab178e30e87d3786fea94c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3597
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using Soft-RoCE is only relevant when testing
RDMA transport. For all other cases, we might
treat the IP address as non-rxe.
This simplifies the checks a little bit in couple places.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I996afb364070fbe107bbe97207952f99e4089308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3596
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Soft-RoCE sometimes returns non-spec compliant values
in the WC entries after the qpair has been disconnected.
This can result in segmentation faults. In order to avoid
this, don't test shutdown on Soft-RoCE.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I604ffaf38aa8da5efa349df0b1b51e7e391d17f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3582
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new sample application to test I/O abort for NVMe backend,
both PCIe and over Fabrics. And enable it to test pool by NVMe-oF
+ delay bdev + malloc bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5aa28b523bdb2c1d4d8c7af05f925c4dd01dda86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2661
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme-cli tests with NVMe-oF could be silently skipped,
based on presence of the repo on system.
This patch makes it a requirement for tests to run,
and with that builds nvme-cli.
fixes#1469
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I581df5a00988b775e54110f718b95beb88487145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2970
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add simple periodic round robin poll group migration to the example
application to exercise SPDK thread dynamic scheduling.
Add CLI option to enable the feature manually. Default setting is
disabled, and the period is specified as micro second.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4639e94ce00611a600ff068e754ee6f31905565c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2556
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If return is called without specifying the exit status while being
used in the trap context, it inherits the exit status code from the
last cmd that triggered the errexit (i.e. the cmd which was run right
before the trap). In this particular case it may be quite unexpected
since return is called after successful execution of the modprobe,
implying the overal success of the function. However, as set -e is
called right before return, the function returns with a != 0.
To avoid this behavior, explicitly return from the function with 0.
Change-Id: I8b21e7aa6cd5628f14b66e559d05b4d0a20e2050
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For RDMA, it seems we may have to wait out some timeouts to
reset all of the connections to make this test work reliably. Instead,
just restart the target for each test.
If there's a way to force close all of the connections properly in the
future we can go back to running these all on a single target.
Change-Id: If79257349007765dc16bacebf810312a025d70a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1609
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If this function fails due to, e.g. modprobe not being able to unload
kernel modules, the errexit will prevent nvmftestfini() from killing
target applications.
Avoid this scenario by ignoring nvmfcleanup()'s es when called from
nvmftestfini().
Change-Id: I3a05261f71d3dcc6ed06f786b4cc1988fd733ffc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Broadcom CI
There are tests which create a filesystem on a device.
Each one could use a timeout and retries for each mkfs.
Otherwise following error could appear due to not test
related system activities:
'mkfs.xfs: cannot open /dev/sdb1: Device or resource busy'
References #1141
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7307b085ada42200995d8bd2fcfd0469ee60a732
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use serial number to identify connected nvme subsystem.
/dev/nvmeX might be taken by some other device which is
not even a part of the tests.
It also might be affected by previous tests and not
always show up with the expected name.
Fixes#1308
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8d0e1b05f22a1263340014abdaf557f0fef5ad82
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In case there are no /dev/nvme* devices found, the test will continue
regardless trying to pass literal glob strings as an argument to nvme.
This, of course, fails, e.g:
ci.spdk.io/public_build/autotest-per-patch_7066.html
Avoid this by generating list of the nvme devices and abort the test
gracefully in case it's empty.
Change-Id: I71628aa78a5cfc6c5696f1fc17ed3480d4c642ee
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add qd=1 test in per-patch test.
Add qd=32 in nightly test.
That can find some issues in corner case.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic7e33812facaa031af52ba0217d310bf0040473c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1240
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case the random string beggins with `-` (still a valid ascii char
that nvme supports) the rpc.py arg parser will treat it as an
additional argument instead of actual subsystem value.
To mitigate, escape the `-` in case it's the char that starts the
string.
Fixes: 1240
Change-Id: I07bd8134fb9fc16234e72e9ebd27e2b6b90d6b62
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is necessary to avoid leaving the machine in a bad state between
test runs.
Change-Id: I2c68d2dc88f0f9f4cab099564d25a3e21eb5671c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The goal of this test is to make sure that proper parts of the lib
fail as they should. These particular tests focus on:
- spdk_rpc_nvmf_create_subsystem(): model and serial number checks
Change-Id: I504279d08b192d6dfe37a8a601eda44084b596d4
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Instead of declaring each app in the actual test, source their default
declarations from a single location. Additionally, use them as arrays
now instead for easier cmdline management.
Change-Id: I0ea39403f070dc57987065ebb800e91c35de643a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Sample output from rxe_cfg:
Name Link Driver Speed NMTU IPv4_addr RDEV RMTU
eno1 yes tg3 1500 192.168.100.1 rxe0 1024 (3)
eno2 no tg3 1500 192.168.100.2 rxe1 1024 (3)
eno3 no tg3 1500 192.168.100.3 rxe2 1024 (3)
Sample output from other systems rxe_cfg:
Name Link Driver Speed NMTU IPv4_addr RDEV RMTU
ens3 yes e1000 rxe0 1024 (3)
ens4 yes e1000 rxe1 1024 (3)
Looking at the above output, amount of columns after greping particular line
varies between systems and configurations.
Meanwhile "rxe_cfg status" is an equivalent command, but allows to add
argument that will be matched to RDEV name.
With this patch we no longer depend on awk to select columns, but instead
printout all soft roce enabled devices and grep for particular dev name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id4483c58f0fdcef2f38abdf56257658643a3069f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
It is a leftover from previous structure of this test.
Since then usage of SUBSYS_NR was removed and this part
was left unused.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia1f6f8046f82370e793182b47920b4bf4d3231a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Github issue 1165 details some issues we have with soft-roce and these
tests. Right now we are disabling them for build stability.
Change-Id: I3a9e28ff3cc1c6ac7d9aa91d93541e295514bb7b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The network operations are now asynchronous, so wait for the kernel
to stop using the NVMe partition after unmounting the filesystem.
The kernel is presumably checking for partition tables or unmapping.
Change-Id: Ibefe8e072823a230a896ecfd0adcd9d5fff2723f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482926
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
During test before upgrading our vm's to Fedora31 there were issue with failing
nvmf test on function waitforblk. In some cases hardcoded nvme0n1 name was not
found in system. Here is fix that change searching by name to searching by nvme
serial.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic5ee70804652a057fa26b8cc004b5227262d2122
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This test verifies the custom identify handler functionality
by querying the NVMe drive and comparing serial and model
number from the NVMe drive with the corresponding info
from the NVMF identify result.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I9d4edb1bf32550cbf5fbd45cbfa85f9afc408fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481910
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On the target side, disconnection process is asynchronous and ack is
sent to the initiator before completion. This has caused latent
failure in a test case. As a workaround, leave 2 seconds before
starting to the next test case for now. Better solution will be
followed and so we don't care much about the location to insert
sleep.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id49349e3b7303ef9523b73d7a04d4e9837246c44
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the same handler for SIGINT and SIGTERM so that
the working thread can exit.
Change-Id: If1ce617ddd778e92bed6f95089c48caf841e256f
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468661
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
use the nvmf lib to add an nvmf example which
doesn't use the spdk app framework. It can show
how to use the nvmf lib to build your own nvmf target.
We encouage you to use the RPC cmds so this example will
not supply the configuration file. You can read the
README.md to get the steps how to build your nvmf target
and test the IO status.
Change-Id: I8d175934f7364d40fb44d36e85c31d8ea5063654
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468457
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
To check whether the process already killed and if the
process is not there, return error.
This is to fix the below issue:
https://github.com/spdk/spdk/issues/1066
Change-Id: I5f36213237a4b0eed8edbc69e666037cf17488b2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This test specifically gets a little more complicated looking when we do
the test this way, but the goal is to enable deterministic reporting of
test completions on a per build basis.
Change-Id: Ica36986f821337c22654fb4cc25f9a72a3d73517
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test has always relied on /dev/nvme0n1 being the location of our
test drive which means that it is the only one in the system at the time
the test is run.
So instead of trying to loop multiple non-existant nvme drives, just
call it out directly.
Also, add a todo to remove the dependence on NVMe0n1 since we could run
this test on a machine where the main filesystem is on an NVMe drive
which would break this test.
Change-Id: Ibb2448d9367a5c80d85a1c91b0c6e44e58237751
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This cleanns up the logs for this test and makes it easier to follow.
Change-Id: Ifc6fcea8672d4d186e3e622eddfc200fdfd076ce
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will allow us to use timing_enter and timing_exit directly
inside the run_test function. That function already lends itself well to
nesting the way we do our timing.
This patch series is aimed at combining the timing_*, run_test, and
report_test_completions calls all into a single place. This will greatly
reduce the number of lines of code in our bash scripts devoted to
tracking timing, formatting, and test completion. It will also enable us
to expand on the reporting of test completions. Further down the line,
this will also allow us to unify test case documentation.
Change-Id: I8e1f4bcea86b2c3b88cc6e42339c57dfce4d58f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The first IP is not configured until after nvmftestinit.
Change-Id: Icfc4ce40e357d36da2c50fefb3b967806966eb80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In nvmftestfini we try to kill the nvmf application, but this doesn't
get set by nvmftestinit. I think that nvmftestfini and nvmftestinit
should be symmetric options, or at the very least, one should be able to
call fini right after calling init without fini failing.
Change-Id: I14f274f940ec20c2d5f8d831fed3f6d6c4c6d2ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
