This data structure is not used.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I143fb9256f692d7bd9bb5e14cdc479f64ddcef45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3746
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Retrieve actual IBV state when we receive WC with bad status
2. Don't log an error if WC status is IBV_WC_WR_FLUSH_ERR. This
means that we are performing qpair cleanup and this WC is expected.
Change-Id: Id23634092f537861e66ca0f83ab79db9e052507b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3736
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From the time a shutdown is initiated the controller shall disable
Keep Alive timer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Id499dabce1913b9da2f0b3fd961fdfc8b621afa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3462
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After CC.EN transitions to ‘0’ (due to shutdown or reset), the
association between the host and controller shall be preserved for at
least 2 minutes. After this time, the association may be removed if
the controller has not been re-enabled.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I4734600067fd4b7306b46f1325fdd5031e81c079
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2984
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This call can be made directly now that
spdk_nvmf_qpair_disconnect is thread safe. It's
actually better that we do it this way, because
the qp destruct call is guaranteed to block until
the ib events associated with it are acknowledged.
this means that by processing the disconnect before
we ack the event, we will have valid memory to do
the atomic checks.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If6882b7dc568fe4c35f4a35375769634326e9d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3681
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should use this function as the synchronization point
for all qpair disconnects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic685ac3481765190cc56eeec3ee24dad52e336c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3675
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF controller creates a ANA group for each namespace,
ANA group ID matches namespace ID, and default ANA state of ANA group
is optimized, and the MNAN field is set equal to the NN field.
If a ANA log page contains multiple ANA group descriptors, it has
one or more descriptors will not be 8 bytes aligned. Hence we create
one descriptor and copy it to the ANA log page at a time.
Change count will be supported later.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ba6aa78983480caa3dfbf22aefc9aeabfd5405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the pdu management consistent with other PDUs, then
we can easily adapt our code into some hardware offloading solution.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic4a2847fd1b6cacda4cbaa52ff12c338f0394805
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA target can't handle bidirectional xfer type, in debug build
it throws an assert in nvmf_rdma_setup_wr function. NVMF controller
performs checks od opcodes, but the failure happens before this
check. Add similar validation in TCP transport.
Change-Id: I14400b9c301295c0ae1d35a4330189d38aeee723
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3436
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
CC.EN, CSTS.RDY should not be modified during shutdown.
It doesn't make much sense (against nvme spec) and nvmf spec 1.1
doesn't mentioned it (4.6) either.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7014b10b0217db61c3d380d5c0843808e54577cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3477
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently we don't resubmit receive request associated with AER
request to SRQ. This leads to reducing of SRQ elements and may
lead to non responsive NVMF target.
Fixes#1507
Change-Id: Ie96f8c4be0202ae973e561ebe5ea28688a6a3b72
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since rqpair->qpair.group is set to NULL when we remove the
qpair from poll group, we fail to send event to qpair's thread.
This patch adds a pointer to io_chaneel to spdk_nvmf_rdma_qpair
structure and a function to handle poll_group_remove transport
operation. In this function we get io_channel from nvmf_tgt,
this channel will be used to get a thread for sending
async event notification. This also guarantees that the thread
will be alive while we are destroying qpair.
Change-Id: I1222be9f9004304ba0a90edf6d56d316d014efda
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3475
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new abort functionality doesn't take custom admin cmd
handlers into account.
This commit allows setting a custom admin cmd handler
for abort that provides the ability to influence the
bdev lookup to which the abort is sent to.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I3a66c6f863f5ee4d89cb2194dffdc6855945fa8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3485
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct spdk_nvmf_request holds req_to_abort and so passing req_to_abort
separately is not really necessary now. The internal API
nvmf_ctrlr_abort_request() was added at the stage of prototyping.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ef2467d6f92422f044650c62a0777b95c0fc1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3488
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no reason to continue processing these requests if the
qpair is not still active. We should complete them and free
any resources they are still holding.
Also, not doing so can cause issues with trying to access pointers
in the qpair after they are invalid. See issue #1460.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6e570a576983dfedf726dc4a9a83316209403e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b43e79c3b0d9c53ed04b01a9eaa9b117b32d81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3013
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to tqpair->group->group.pending_buf_queue.
If the state of the request is DATA_TRANSFER_TO_CONTROLLER_PENDING,
the request is queued to rqpair->pending_rdma_read_queue.
If the state of the request is DATA_TRANSFER_TO_HOST_PENDING,
the request is queued to rqpair->pending_rdma_write_queue.
According to the current state, dequeue from the corresponding
queue, and then call an new helper function
nvmf_rdma_request_set_abort_status().
Using helper function will be easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0327f4d2c4728a11b3b6bbc7c2252f0b35263cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3012
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_rdma_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS, or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1462a21db7270f3d63f8f293ad4be61d52e74da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3011
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98347b68e8b6b4a804c47894964cb81eae215aaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3010
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to both tqpair->group->group.pending_buf_queue and
the queue per state.
If the state is AWAITING_R2T_ACK, the request is queued to the
queue per state.
Dequeueing from the queue per state is done in
nvmf_tcp_req_set_state(). Hence explicit dequeuing only when the
state of the request is NEED_BUFFERING.
Most abort operation is common between two cases. We can use fallthrough
in switch-case but factor out the common operation into a helper
function nvmf_tcp_req_set_abort_status() instead because we may use
the helper function in future and using helper function is easier to
read than fallthrough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1695b084d5d1f2537fbdd512bc3cd136e0f6a65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3009
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_tcp_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1abceecc211ee79d8ac18a82dc63b13d313a6f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3008
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out abort operation on the specific qpair into a helper
function nvmf_qpair_abort_request().
After this refactoring, nvmf_ctrlr_abort_done() calls
_nvmf_request_complete() only if the passed status is zero.
If the passed status is not zero, nvmf_qpair_abort() is responsible
for calling _nvmf_request_complete() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4828c0e21cc7650210675661d6e1c0fd54c7a2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Description is not clear but according to the NVMe specification,
always set the completion status to success and differentiate only
the bit 0 of CDW0 between success and failure for abort command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0195e72fe1d7fcc2592f47e9dcf92ac56912282c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1965
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Logic error Dereference of null pointer ctrlr.c
nvmf_ctrlr_async_event_request 1522
Dereference of null pointer is not possible if sgroup obtained using
ctrlr obj. Adding corresponding asserts suppresses the warning.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I78b32fadd5449ee9b533f65193c70e55cf9a8f1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3251
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It should return "NVME_TCP_PDU_FATAL". I think that
this issue is introduced after we move the data
copy from tcp transport layer to the socket
layer. And it should return "NVME_TCP_PDU_FATAL now",
and it will be consistent with the logic in the same
function.
With this patch, it will fix the big I/O size write
from the initiator.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide018adb603eb13d002fc98886258dd1e2424f7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
10 is kind of unreasonable. You could easily start
seeing failures if you had just 3 intiators trying to
connect with 4 io qpairs at once.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9985ffa3b03ebb33880eb5934b60eaafab57c82d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rdma_qp may not be initialized when qpair is not fully
created. When such a qpair is being destroyed we may pass
a NULL pointer to spdk_rdma_qp_disconnect or spdk_rdma_qp_destroy
and hit an assert. This patch fixes this problem for NVMEoF
target and initiator.
Change-Id: I84787dc1b1211293c2a19f59d47727eaecd9d5a1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3050
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe driver had processed ACL as 1's based value by mistake,
and SPDK NVMe-oF target sets ACL to 0. Hence If NVMe driver connects
to SPDK NVMe-oF transport, spdk_nvme_ctrlr_cmd_abort() always queued
abort request.
Fix this bug to process ACL as 0's based value in
spdk_nvme_ctrlr_cmd_abort(). Besides, initialize ACL explicitly to
0 in spdk_nvmf_ctrlr_identify_ctrlr() for clarification.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id4f3a469776cdab88bcc6f41e7893885a7b78d8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
