spdk_bdev_io_submit() always returns 0, so the return
value is unnecessary. This eliminates a slew of checks
on that return value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493ecefc7b72d3b3a44bd92df70bd5c653453ff0
Reviewed-on: https://review.gerrithub.io/377627
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We no longer support resubmitting an existing I/O to
a lower bdev. This enables accurate tracking of I/O
at each bdev layer for purposes of reset handling and
QoS.
__submit_request() in bdev.c is now only called
from spdk_bdev_io_submit(), so just collapse these
two functions together while we are here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b46df42b1a6476f9dbd8c61dd3380dbd145315d
Reviewed-on: https://review.gerrithub.io/377626
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This follows similar recent changes to bdev/split.
Future patches will move quite a bit of duplicated
code between these modules to a set of helper functions,
so doing this renaming will make those future patches
more clear.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic67ee03d68b3080b7083ba3d91505f0ddf06da7b
Reviewed-on: https://review.gerrithub.io/376443
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes some functions that were only called from
one place, to reduce the number of functions that will
need to get moved to the common bdev library in a future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieaaf9f1fdc907591902ce543024d547a70d00b7f
Reviewed-on: https://review.gerrithub.io/376422
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Make sure DEBUG macro is not defined while processing log macros,
otherwise DEBUG (which should be passed as is down to RTE_LOG and
concatenated with RTE_LOG_ prefix) gets substituted too early:
In file included from /spdk/dpdk/build/include/rte_debug.h:46:0,
from /spdk/dpdk/build/include/rte_pci.h:85,
from rte_virtio/virtio_dev.c:48:
rte_virtio/virtio_dev.c: In function ‘virtio_init_vring’:
/spdk/dpdk/build/include/rte_log.h:333:11: error: ‘RTE_LOG_1’ undeclared (first use in this function)
rte_log(RTE_LOG_ ## l, \
^
rte_virtio/virtio_logs.h:41:2: note: in expansion of macro ‘RTE_LOG’
RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
^
rte_virtio/virtio_logs.h:42:31: note: in expansion of macro ‘PMD_INIT_LOG’
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
^
rte_virtio/virtio_dev.c:82:2: note: in expansion of macro ‘PMD_INIT_FUNC_TRACE’
PMD_INIT_FUNC_TRACE();
While at this, change format string type specifier to the correct one.
Change-Id: I7f7bda105aa00b99bea4ea5f6a9bff268940a557
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Reviewed-on: https://review.gerrithub.io/377945
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I inadvertently misordered the arguments in a call to spdk_bdev_unmap.
This call is unused as of this patch, but is used by future patches.
Change-Id: I6042a3f4e05bded21b0ceb4d3b104856bcbf8c12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/377961
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There remove callback function will remove the nvme_bdev from the global
list, we do not need to remove the device in the function bdev_nvme_destruct().
just make sure to remove it from list when the app exit.
Change-Id: I1859bfd696ed9c0ca3ac1cd8ffadfd9488df0fcd
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There's no need to keep a copy of that file.
Use system include instead.
Change-Id: I07bfb7c5de57efaa420a9fe38408c8ef230110f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376350
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The field was set, but unused. virtio_hw already has
max_queues field. Since SPDK rte_virtio does not provide
any virtqueue abstraction nb_tx_queues and it's setup
functions are not needed.
Change-Id: Ib9bbdc86e6b6cede13a6cc251331590d6985db66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Save us some allocations and fix
scan_target() error handling path
Change-Id: I29fe18a6e592c7fd32d0486f831f6b053f59b561
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The bdev modules now take all read, write, unmap, and flush requests in
terms of blocks rather than bytes.
The public bdev APIs still accept offset and length in bytes for now.
Change-Id: I57f0955d52272f57755f0ff4dbc56721fdc2ef51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Target enumeration now uses separate poller to receive virtio
response messages. A special virtio_scsi_scan_base struct has
been added to keep track of how many targets we still have to
receive response from.
Making target scan async allows other pollers to run while
bdev_virtio still has to wait for a response.
Change-Id: Ia9af9d61fb4f880d0535df0b18aa443fff6dc9be
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparations to make it asynchronous.
Change-Id: Iab651974841d83cf36b8e050e3905638f88ad992
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_virtio requires us to do SCSI inquiry for
each device and wait for a response. It currently
polls inline for this response, taking up entire
reactor exclusively. Making it async would allow
other pollers to run while bdev_virtio still has
to wait.
Change-Id: Iefc88e0a2efb5b791ffe23b2e623b7c50d759084
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_init_complete could have been called twice.
While here, also simplify bdev_initialize error path.
On allocation failure, bdev subsystem will now finish
with bdev_mgr->module_init_complete set to false.
Fixes: 7fefd60fab ("bdev: make module init synchronous again")
Change-Id: Ia4b5d571d26beb34f0e6c0f4c7b3176215eec69f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375572
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue each I/O to the base bdev as a new discrete I/O rather
than resubmitting the original I/O. This enables some
upcoming changes to better handle queueing and reset-related
work at the generic bdev layer, which will also deprecate
the resubmit I/O logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic1caa89014981e948edfec5e8eaaacd41a73d49c
Reviewed-on: https://review.gerrithub.io/375495
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent it with other parts of this structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie36488813b53ce20663c50a5c9f049c4c9723d3a
Reviewed-on: https://review.gerrithub.io/375494
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) Change each split_disk to just point to a
split_base structure and drop the extra base_bdev
member. We can get the bdev from the split_base.
2) Simplify the names a bit for some of the members:
split_base::base_bdev to split_base::bdev and
split_disk::split_base to split_disk::base.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8621b19ad09324d939ed43d79900fecb18291e6
Reviewed-on: https://review.gerrithub.io/375493
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gencnt is no longer really used since there is no more
differentiation between "soft" and "hard" reset. The
original idea was that a hard reset would complete I/O
known to the bdev layer even if the underlying bdev
module had not actually completed it yet. We do not
actually support that concept, and it was a bit flawed
anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa2c85bb474c7dd55eb7386d6cad5079f5edbccc
Reviewed-on: https://review.gerrithub.io/375484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I/O requests are now allocated from bdev_io memory.
virtio_req->iov now points to raw payload, request and response
iovectors are available as separate fields. This solution
should apply for both vhost-scsi and blk.
Change-Id: I588fbdd7fc5442329aadbcb3e31b2f4a7118ec8f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed various minor bugs and removed unused code.
Change-Id: I24d3f10a494b9f9c69f45e888c7e1511adc268bc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes a GCC 7 warning:
rte_virtio/virtio_user/vhost_user.c: In function ‘vhost_user_setup’:
rte_virtio/virtio_user/vhost_user.c:439:46: error: ‘%s’ directive output
may be truncated writing up to 4095 bytes into a region of size 108
[-Werror=format-truncation=]
snprintf(un.sun_path, sizeof(un.sun_path), "%s", dev->path);
Change-Id: I147c9efe93cc6ce9370da6443f181f916457e3e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supports both PCI mode (for usage in guest VMs) and
vhost-user mode (for usage in host processes). The rte_virtio
subdirectory contains a lot of code lifted from the DPDK
virtio-net driver. Most of the PCI and vhost-user code is
reused almost exactly as-is, but the virtio code is drastically
rewritten as the DPDK code was very network specific.
Has been lightly tested with both the bdevio and bdevperf
applications in both PCI and vhost-user modes.
Still quite a bit of work needed - a list of todo
items is included in a README in the module's directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85989d3de9ea89a87b719ececdb6d2ac16b77f53
Reviewed-on: https://review.gerrithub.io/374519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Report the Ceph pool and RBD name in the get_bdevs output for RBD bdevs.
Change-Id: I0e9be0b540e90503ce052c968f979b5887673c24
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this iteration, we only support write_zeroes in the form of a
deallocate call that returns all zeroes.
Change-Id: Ica837ce70672174df63012719de60463fdb799cf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372005
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I0e8c34237acc88fb51bac56c2f99df52ec199f9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_aio_bdev RPC still accepts "fname" for backwards
compatibility.
Change-Id: Ibf44f5f3667c6de4b827f7f3f8787aff0a6c4fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ac636c18d7e71e0184d4f67ec54a36217a11db0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373833
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disk size in bytes is only used within create_aio_disk(), so we don't
need to save it in the struct file_disk context structure.
Change-Id: I63d230448a67c2b49c57eac2b4d44dce27c303cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia2202eadfb8140b7a51dd64d4241e85aceff361c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the redundant sector size check; the generic bdev code already
checks for this.
Also use the bdev blocklen field for both offset and size calculations.
The bdev blocklen is the same as the namespace sector size.
Change-Id: Ia8061eb4cfc229d4b6fbe2caabf2dd81656bc697
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372862
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Swap the meaning of the return value to match the name of the function.
Change-Id: I89dc09e3b309a06586adf2ab750092f06077ffd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372859
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id004e06eea8dfb5d7be24282bfe4d31069ff6573
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An I/O completion callback may delete the channel, so
restructure the poller to avoid touching channel memory
while triggering completions.
Change-Id: I612f10ff172481084386c9a3056fdd5e2f19e854
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the poller to tolerate channel deletion within
an I/O completion callback. This won't happen today
because channel deletion is always deferred, but
prepare for that case.
It turns out this is simpler anyway.
Change-Id: Ibff23d84fe14247849e95cebc3c80369812bdd6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370525
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The protective MBR entry may not be the first one. This is already
handled correctly when comparing the total size field, but the start LBA
field was always looking at the first entry.
Change-Id: Ie54e424b2e9cb546b1ed04192662936e04e08b6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If3cd7ee8251b5e311d5e1e9210085f8c2cbc83e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary headers and order the remaining #includes correctly.
Change-Id: I6b331aa1514e55e7bf56a07be23f630e4ae3fcdb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370731
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The message printed when start_lba doesn't match the expected value
would print byte-swapped values on big-endian architectures. On
little-endian architectures, the problem would not be noticeable, since
the conversion doesn't do anything.
Change-Id: I9e8d4485b5710f4333d04bb006bc204416c689cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev could be unregistered multiple times when all it's descriptors have
been instantly closed via it's remove_cb without any deferred
event/poller
Change-Id: I128716077b0512c6334bdd113220684f8cfcbecb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370949
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Hotremove event was detected on base bdev, but wasn't propagated to
vbdevs. This patch makes base bdev destroy all it's children once
hotremove is triggered. This fixes hotremove segfaults and adds full
support for split/gpt hotremove.
Change-Id: I7f8b0b109ef237783b6b2e33a18f68c59a8bbe72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367824
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch also releases bdev module and closes claiming descriptor on
regular split base destruction.
These problems must've been overlooked in patches 26d6770f and be9a3b9f.
Fixes: 26d6770f1c ("GPT: add GPT bdev support")
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: Ib47e2c4d3b99c6d3f2dbe7ef01be81ca3dd97341
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370181
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was probably overlooked in patch be9a3b9f.
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: If29ad65ac168f3dbf7e1602f26f939dfbf17599a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie25a87c4b3f781299fa744fdcff6c9a63d473935
Signed-off-by: Roman <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/365723
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Otherwise we'd fail sanity checks when closing the claiming descriptor.
Current approach works because we never close the claiming descriptor.
Fixes: 4fc7e66614 ("bdev: add vbdev claim/release semantics")
Change-Id: I1c1f0c11450e749419726df460334ab97b43b584
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370179
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When device has more than one open descriptor, remove_cbs of particular
descriptors could be called more than once.
Consider the following scenario:
bdev X with 2 open descriptors A and B.
X is removed (hotremoved for instance)
bdev_unregister(X) is called
* bdev->status = REMOVING
* A->remove_cb is called
* some poller is started
* B->remove_cb is called
* another poller started
* poller from A->remove_cb finishes it's work and closes the desc:
* bdev_close(A)
* A is removed from bdev->open_descs list
* bdev->status is REMOVING, so bdev_unregister(X) is called again!
* B->remove cb is called again!
* another poller starts? segfault?
Fixes: 57d174ff67 ("bdev: add spdk_bdev_open/close")
Change-Id: I0a898ec0aee521d0b2a1168fe7d469cc41a8ef4f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369727
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
GPT uses the standard IEEE CRC-32 polynomial, not CRC-32C.
Change-Id: I94dae01ec7b31cb3c3efc735d9dfa4e0cfea9ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369306
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Module initializaiton was made asynchronous recently
to support bdev modules like gpt which need to do
asynchronous I/O. But all modules now do any
asynchronous I/O in their examine() routines, and
init functions only do very basic operations to be
ready to handle examine() callbacks.
So simplify the bdev code and modules to go back to
a synchronous init procedure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb16156796ad7511d00f465d7a2db9acda6315b6
Reviewed-on: https://review.gerrithub.io/369485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows vbdev modules to be ready for examine
calls for (physical) bdev modules when the latter
initialize.
This requires the following modifications to existing
bdev modules:
1) error and split now search their config sections
at examine time (instead of init) to see if the
bdev should be consumed by the vbdev module
2) gpt is simplified considerably - it no longer
needs to save bdevs to examine when
gpt initializes later
3) nvme must register its io device before registering
the bdev, since vbdevs may immediately start trying
to send I/O to the new nvme bdev
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fe5686092ffb15fc8bdbc068b09add229d9da6c
Reviewed-on: https://review.gerrithub.io/368598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional fields to the g_bdev_mgr to enable
deferring spdk_bdev_init_complete when modules have
finished initialization, but vbdevs are still processing
examination callbacks due to asynchronous I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12dc7cb08e44e022b5bad75ba9a946571eb65957
Reviewed-on: https://review.gerrithub.io/368832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates overloading of the term "register"
in the context of bdevs, as well as opens up the
idea of examining bdevs not just when they are
registered, but also after they are closed with
write access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e15f9dc0fa4e02214f188f987f9da2dbc8db1f7
Reviewed-on: https://review.gerrithub.io/369042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cf4e40e8218c6ba150fe9ffead58340c7bdf6a
Reviewed-on: https://review.gerrithub.io/368627
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a name parameter to the MODULE_REGISTER macros, and then
modify each bdev module to pass a string for its name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If878617ce3c3eacfcf5df44ed6f194f11c66f78f
Reviewed-on: https://review.gerrithub.io/368596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibb28b8432c94e70f522bdf34c5f4a10e4c25a8bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are UEFI-style GUIDs in little endian byte order, not standard
UUIDs.
Change-Id: I4d61afa2901830c784c24a5e039bba1d98f32e62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Fix the partition type GUID comparison to actually look at the partition
type GUID, not the unique per-partition GUID, and fix the test to match.
Change-Id: Ie64f1effcc75883f17ccf6240f6469161d2a5aa5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368606
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It should not print error if there is no GPT
signature
Change-Id: I6e5f8d31aed62dfb420f0ff0560bfbf8a7e8afb3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368476
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The purpose is to store which partition is used from
the original bdev, and it can be used to read
the further partition entry info.
Change-Id: Idbc4452846e88b486ff281c288704af80938788a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6a138e1c1d775e8c8bfeede9600f8b0f799ecdad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
