The backend device such as virtio-blk or virtio-scsi
may support the SIZE_MAX and SEG_MAX. Then SPDK needs
to split the big IO. Add this feature in bdev.
Change-Id: I2442e14121ccf141682964425e96382fec482af3
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4600
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If ls_pending_queue is not empty, then add the ls_rqst to
ls_pending_queue instead of trying to get xri.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I97e48f30cb6d4fd69548d48e6360275d9f1adec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5502
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
nport and rport data structures are supposed to be used only
in control path but not datapath. FC data path scaling is based
on connection and connection object contains all the required
information for command processing.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I70f6896955d97abc86bc7c5e6b9f160d622e60d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5501
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Currently we are holding hardware receive command buffer till
the IO is completed. This is effecting the number of commands hardware
can receive. Copy the cmd into driver buffer and release the
hardware receive buffer back to hardware ASAP.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic292056b3e012d40515d0de5b9808cd8960811ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5430
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today we have two lowlevel LLD apis nvmf_fc_init_q and
spdk_nvmf_fc_init_poller_queues for LLD queue initialisation.
Since two calls are redundant, merge them to one api. Also remove dead
function code nvmf_fc_hwqp_reinit_poller_queues.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic3df6bff7d38d7b1e946755c3224daf7f6194125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5444
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use inline code instead of functions when it is used only once.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5af26f81ac15546dd1e4e4a14753d32f7ee9e1d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5443
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK supports two latest DPDK LTS releases and DPDK 20.11
is out now.
Remove all functionality and checks for versions <= DPDK 19.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4c750c49352fe4ad4b50c7a719867387808f0df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
__rte_experimental attribute in DPDK ends up being changed to
'deprecated'. See rte_compat.h in DPDK.
Goal of patch below was to allow SPDK to use experimental API
"(b6fce19) env/dpdk: add support for DPDK 18.05 dynamic memory allocation"
Yet it disabled warnings for both. This patch makes it so that
__rte_experimental will not produce warnings, but deprecations in DPDK
will.
It will help identify incoming changes when testing newer versions
of DPDK in the future.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a75e37c976d613c7ec6ee32e05fc6da79a60a1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5342
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These replace the pci-whitelist and pci-blacklist params
which are now deprecated.
pci-blocked will still use the -B short name. pci-allowed
will use a new -A short name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1c46c40ad6a0f49fb539b18cdd8d0c8daac636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The old pci_whitelist/pci_blacklist are now deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fddec0c90691dd385eb21d13be849247f144889
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5279
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
pci-whitelist and pci-blacklist are deprecated, so
use 'allow' and 'block' instead for DPDK versions that
support it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430f73fc402ca9fc07d004e719435e5b3dc963f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5278
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases we need to check if we are working with
SoftRoCE driver (rxe) since it doesn't support several features
such as SEND_WITH_INVAL and LAST_WQE_REACHED ibv async event.
vendor_id of this driver has been changed from 0 (it was not
initialized at all) to 0XFFFFFF in commit
0184afd15a141d7ce24c32c0d86a1e3ba6bc0eb3
So now we should check for both values.
Change-Id: I62ce4d68c11612a07fe97606658a5b79f1db2149
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5307
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was omitted in 296a6d9838
and is currently causing ABI inconsistencies.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ifb5b2360ff1ffbaffdc3b5d057047d035b98d909
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5368
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a public API spdk_nvmf_qpair_get_listen_trid() and it can
get trid of the specified qpair safely for any transport including
pluggable transports.
The API was overlooked when implementing the multipath feature for
NVMe-oF target. trid pointer was added to struct spdk_nvmf_qpair and
was used to find a subsystem listener.
However, pluggable transports got seg. fault because trid of the
qpair was not set.
To avoid such segmentation fault for any transport, change
nvmf_ctrlr_create() to use spdk_nvmf_qpair_get_listen_trid().
The struct spdk_nvmf_qpair is located in the public header file,
and so leave the added trid for now. It will be deprecated eventually.
Reported-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e0bd24bd58b6ffdf1352332a179a82682f1589f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5323
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rdma_disconnect may return an error and set errno to EINVAL in case
of iWARP. This behaviour is expected since iWARP handles disconnect
event other than IB and qpair is already in error state when we
call rdma_disconnect.
Fixes#1704
Change-Id: I38710198d9b6b70b8940947f8e7c553cd4fbbd51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
checks
Check if the subsystem is paused before checking whether the qpair is
active. The order of these checks doesn't really matter, but in the next
patch it will be more convenient to check the subsystem first.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc95e2578e9a95296f5fbc6023af3b542e954781
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This function is only called from one spot, so it's simpler to combine
it with that function.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0a35e11edaf6c4446de530a3b0f538aa4a3238f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
always be specified
Previously the parameter was optional and the size could be increased as
necesary. Now, it is required and a hard maximum. Later another function
could be added to dynamically increase or reduce this number if
necessary.
Change-Id: I3524ac737a6b592b4f6ce14ea48d3742a352c70f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, trace file is always created in shared memory.
Adding disabling trace in order to avoid trace
file's creation if user doesn't require trace.
Also returning error if trace is disabled but trace rpc is
call to enable or diable trace group
Change-Id: Ic9ea781a8a1edd530d0a5921b0dc774356ae4d48
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_vtophys() already checks that, so we don't need
to check it in the NVMe driver again.
Change-Id: I74288ae8cab80e1be34583475fa02a3ae13e090c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In commit 9eefbc, we've fixed an iscsi connection leak problem(
use telnet ${ip} ${port} to reproduce), that a connection without
login handshake will be left forever with 'invalid' state. Here,
to avoid killing normal connections by mistake, we need to unregister
login timeout timer in two right places:
1) immediately after login timeout happened
2) when we receive login pdu instead of login success(login may fail
because all kinds of reasons: ACL...)
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I55bbc1c6ac6d2e0b6545b9f7d802ba057b2a09dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As part of FC transport destroy, FC LLD (Low level Driver) needs to
to do its cleanup which cannot be completed synchronously. So
allow transport destroy to be asynchronous.
FC transport code to use this functionality will be pushed shortly.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I104cf7d131e18199abdcf0651df261fe41d666ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5180
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an new optional parameter wait to the RPC, iscsi_create_portal_group
not to listen on portals until it is started explicitly.
Fixes the issue #1676.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic217f1ccceb618e70fdb2aff3f710d262a8a9bdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5091
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new RPC, iscsi_start_portal_group, to start listening on
portals if the specified portal group is not started yet.
The next patch will add an new parameter wait to the existing RPC,
iscsi_create_portal_group.
The RPC allows the specified portal group to be already started,
and returns a success response in this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I631d6bccffb38092c95694f922f10648e24d6ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5090
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Factor out the internal of rpc_iscsi_delete_portal_group() into
a function _rpc_iscsi_change_portal_group() and rename the related
data structure to use them for the upcoming RPC,
iscsi_start_portal_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I965f1e52f04fb54c6a89987836f89c508441a37e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new function iscsi_portal_group_resume() and add an new parameter
pause to iscsi_portal_group_open(). They will be used in the following
patches to pause listening portals while target nodes are created at
start-up because Windows hosts do not retry login.
Pausing and resuming portal group is possible because we can unlisten
temporarily by simply not calling accept(). Any inbound connection
requests are queued to the backlog and once the backlog queue is full,
further inbound connection requests are simply dropped. If we restart
calling accept(), we will dequeue the backlog and be ready for more
connecitons.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7403f91ebd729b47d98a23e589cba8b35569dc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5088
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Explicitly test for not __linux__ where that is the intent, rather
than testing for __FreeBSD__.
Cast pointer to uintptr_t before aligning it, rather than using
a specific integer size which may not be large enough to store a
pointer.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Icfe219e1bbb2d06b3ef05710fac5b7091d340251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5142
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK virtio driver does not support the virtio legacy
device but it's ok for the modern and transitional
device. So update the probe function.
From the spec:
Transitional PCI Device ID Virtio Device
0x1000 network card
0x1001 block device
0x1002 memory ballooning (traditional)
0x1003 console
0x1004 SCSI host
0x1005 entropy source
0x1009 9P transport
Transitional Device: a device supporting both drivers conforming to
modern specification, and allowing legacy drivers.
Change-Id: I28cd277fb2b2e07a429082b7d7bd581f254eae9c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5053
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In my thought, this await_req will not have performance improvement,
and it makes the code more complicated, so remove it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I97d86448fc273098d001a08d914ad45ddac07e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5149
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The zone append command, which is part of the Zoned Namespace Command Set,
has a maximum data transfer size that can be less than or equal to mdts.
Since zone append commands will not be allowed to be split, the user has
to be able to get the maximum zone append data transfer size. Add a
function that returns this limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9da2672ea8a307ff62251c069a42f7540765e08b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5140
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Zone append is an optional command in the Zoned Namespace Command Set.
Add a convenience function to check if the controller supports the zone
append command.
The ratified NVMe TP 4056 added a CSI field (in cdw14) to the Get Log Page
command. However, since there already exist two public functions to get a
log page (spdk_nvme_ctrlr_cmd_get_log_page() and
spdk_nvme_ctrlr_cmd_get_log_page_ext()), avoid creating a third one for
now, since nvme_ctrlr_get_zns_cmd_and_effects_log() itself can leverage
one of the existing public functions.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I99516dbac8db6714488b4d6cabe64c27f46d6153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5078
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove superfluous parentheses around ctrlr->cdata.mdts.
They provide no value while making the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4342d87f0e33fd92fe76357eb0379fb1e9c8f98f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5138
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
RTE_DEV_ALLOWED is an enum and has no associated define, hence checking
for its presence will always be false.
We could test for RTE_DEV_WHITELISTED define, but this macro added for
deprecation warning will be dropped in the future.
Switch to a check on DPDK version.
Fixes: 10ed0eb755 ("env_dpdk/pci: adapt to 20.11 EAL changes")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Change-Id: I75270977b580065b36c753266cbaa5fb73f99eb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5165
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the virtio-scsi controller doesn't support the 'eventq' and
'controlq' queue, the operation(vhost_scsi_controller_remove_target)
of removing target from this controller will always hang.
We can reproduce this by starting a qemu without a bootable guest os.
Change-Id: Ia53b48ae1a18cfb9dc919352fc3cce6ade84c9d8
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
While I assume that the initial thought of having the
NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it is
waiting for, was to make it clear for the reader in which order the
states will be executed.
However, it feels silly to have the same code copy pasted everywhere.
Someone who needs to add a new state will still need to edit
nvme_ctrlr_state_string() and enum nvme_ctrlr_state, which still defines
the NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it
is waiting for.
In one way, moving the NVME_CTRLR_STATE_WAIT_FOR_* states to the end of
nvme_ctrlr_process_init(), when reading nvme_ctrlr_process_init(), it is
actually easier to see the ordering of the states which actually do
something of significance.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia95ea5ac3c44a53179edbdc65cba45bec94e469f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As part of nvmf_transport_qpair_fini, FC transport needs to cleanup
all the resources used by that QPair on the shared hardware. This
hardware cleanup is asynchronous in nature.
FC transport code to use this functionality will be pushed shortly.
Change-Id: I5606a33dff45971badd74e0cc087b132b56af076
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5100
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
0x10 is thought to be a more common size, hard to tell until
we get real silicon but either way 0x80 limited the total
number of outstanding batches way too much.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I61ba219b9d0185b126d300468ddd8a2214ed284a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
