It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Profiling data showed the deference of the CQ head in cq_is_full() was a
significant contributor to the CPU cost of post_completion(). Use the
cached ->last_head value instead of a doorbell read every time.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib8c92ce4fa79683950555d7b0c235449e457b844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fully asynchronous ctrlr detach (b6ecc3729) introduce a register
operation state machine that waits for operation to complete. When
controller failed to initialize, `nvme_ctrlr_fail` set qpair state to
`DISCONNECTED` immediately, causing qpair process completions to
never complete register operations therefore prevent async detach exit.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I205c5157b8ea7b4535f98ff4052414310e421446
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12858
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Print string values for zone state and zone type.
Check for zone descriptor extension valid field before
printing the logs.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I3c5fa9a7a82f3fd6354c1430ec4f4c6259faeffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12869
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Ignore spdk_nvme_cdata_nvmf_specific ABI changes, only reserved fields
were changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I25c4c7576dc393a925d5b8c1a77b194ec7a60ce4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12868
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
admin command set attributes.
Update the identify examples file accordingly.
Ignore spdk_nvme_cdata_oacs ABI changes, only reserved fields were
changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I718e3647835a0706a33e7aa6bae774e133071f9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12866
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
controller capabilities and features
Update the identify examples file accordingly.
Ignore spdk_nvme_ctrlr_data ABI changes. Reserved fields
were changed, so this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I12e622324bc1b0ebef95b854098bce133617051e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12865
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These options are mutually exclusive - fio plugins are
part of the examples directory hierarchy, so it is
confusing to express --with-fio and not see the fio
plugins get built.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e30db1d99d317f8c22318e7ae2d3dd461f18a42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13055
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also added missing single letter options from the Usage
string. Long options (such as --qemu-emulator) aren't
in the Usage string - leave them off for now, we may
want to consider just eliminating the Usage string
entirely rather than duplicating the options in
the Usage string and the option list below it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d8b53f9395f25b07842d81a2d18c29a104b209e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13059
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
- Simply use 'bdevperf' as the page title. This matches
spdkcli and spdk_top.
- a few additional miscellaneous changes
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied4d30ab8c2dd5dfdaf0ae2cb22459be63cdd24c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13058
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
- spdkcli.py is no longer be considered experimental.
- consistently refer to it as 'spdkcli'
- a few other miscellaneous changes
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1f5c75961e4c1741d0573f2041b4b023ee627357
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13057
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
reactor_run() decides whether to start gather_metrics
based on non-zero scheduler period.
The default of 1 sec was set during initialization,
in scheduler_subsystem_init().
This resulted in unessecary operations each second,
even if only 'static' scheduler is used.
This patch moves setting default scheduling period to
respective schedulers.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I953aee271a959b6314c8e83434c922dba9638de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
All other tests wait for scheduling to occur before verifying
the results. Even for 100% busy threads, they are first
round robined between cores.
In some edge cases, if threads are created right at the
end of the scheduling period - they will be 100% busy.
Yet due to low busy_tsc it will be deemed that two of such threads
can be placed on single core. To prevent that a few
full scheduling periods have to be observed.
Thus added sleep for 10 scheduling periods before verifying
the results, similar to other test cases in this file.
While here increased the sleep time between samples to
match the scheduling period. With 1 sec default scheduling period,
no change would occur between two 0.5 sec samples.
Fixes#2140
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5abf3bc04c6f65f4faae2bcd3e6828be72f97311
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The aer test print statements were overly complicated for multi
process mode, so a macro was created to simplify them. The macro
will prepend "[Child]" to the child process print statements to
make it easier to see which process is doing the printouts.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I0ecc5e2526b156fa7f98d44c745408ba922ebeff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12881
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Modified the existing nvme aer test to include a multi-process
option that verifies that two processes will receive an async
event notification. Also added the multi-process aer test to
the CI test suite.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I08731fad317d43dcfb1766d22a3f4c6aa1738d2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12293
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculation of the ANA log page size should use the
identify ctrl MNAN field
(maximum number of allowed namespaces)
not the NN (maximum valid nsid value).
An ANA-enabled controller must have a non-zero MNAN value,
see NVMe Base Specification, Figure 251,
therefore nvme_ctrlr_init_ana_log_page() may safely use MNAN.
Since NN might be much higher than MNAN,
ANA log size based on NN may results in a very large
log page and cause a failure to get ANA log,
e.g. if it is larger than the controller's MDTS.
Fix: replace cdata->nn with cdata->mnan
in nvme_ctrlr_init_ana_log_page()
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I2a522dca833a27dddad25848d7688efa23d23091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
When calculating the bar_addr which is used to access SPARSE MMAP area, we should use the
(offset - region->mmaps[i].offset) as the increment to get the valid access address.
Signed-off-by: Jun Zeng <jun1.zeng@intel.com>
Change-Id: Ie5d0c63cf572847d15dc92f0995fddecf35f1cdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13021
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Transport layer creation is covered by basically any
test in test/nvmf. Similarly "nvme discover" and
subsystem deletion performed later in the script are
also already covered by other test scripts.
Let's remove this script and save about 10 seconds
of run time.
Change-Id: Id37d217972246b6cb1dfaaaf0443016931809dbc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
rte_power was added to DPDK long time ago,
but some of the DPDK packages do not include it.
For those cases just skip building components that depend on in.
This change still allows to use dynamic scheduler, since
the dpdk_governor usage is optional.
Fixes#2534
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ied88edc8d58aae07d1384c1c40203fc80b919d80
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12993
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dpdk_governor and gscheduler use rte_power,
which is only available on Linux and when
DPDK env is used.
Rather than repeat those checks in each mk or Makefile,
added DPDK_POWER flag directly to DPDK env.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I438caad8d333a4df697a79aa45de2930cce71d23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12992
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_net is a dependency for both rte_vhost and rte_power.
Next patch will simplify the checks to include rte_power,
and keeping this depenency next to component that directly
depends on it will make it easier to understand.
Since DPDK_LIB_LIST is sorted by the end of the env.mk,
it shouldn't be a problem to include the rte_net twice.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If2bb2aa5d972148ca8143023657b0aec45306a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12991
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We usually to constitute an (uin32_t) with 4 (uint8_t)s.
or an (uin16_t) with 2 (uint8_t)s.
If you not to force type change, there may be overflow.
Then you would get the wrong value.
Meanwhile elimating the warning catched my the analyzer.
Fixes issue #2549.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I343a508b52c92475a37e3518022680aede806cb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13005
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
When running perf test, sometimes after CONNECT req's resp was
received and processed, the qpair still failed to change from state
CONNECTING to CONNECTED. For when it goes to nvme_fabric_qpair_connect_poll
-> nvme_wait_for_completion_robust_lock_timeout_poll to process the
CONNECT req's resp, the req may have not been finished in sock_check_zcopy,
although its resp has been received and processed, which means the
tcp_req->ordering.bits.send_ack is still 0 and the status->done still
is false. And after the req is completed in sock_check_zcopy, we need
to poll this qpair again to make the state enter CONNECTED.
And if icreq's resp received and processed before nvme_tcp_send_icreq_complete
is called by _sock_check_zcopy, the qpair will be stuck in CONNECTING
and it never proceed to send the CONNECT req. We also need to put it
in pgroup->needs_poll to fix it.
I can reproduce this bug with the following configuration.
target: 16NVMe SSD, running on 20 cores;
initiator: randread test using nvme perf with 32 cpu cores and
zerocopy enabled.
The error doesn't always occur. CONNECT failure is about 1 failure in
ten with the following log. And icreq failure is less frequent with
only target side's "keep alive timeout" log.
Error reported in initiator side:
Initialization complete. Launching workers.
[2022-05-23 14:51:07.286794] nvme_qpair.c: 760:spdk_nvme_qpair_process_completions:
*ERROR*: CQ transport error -6 (No such device or address) on qpair id 2
ERROR: unable to connect I/O qpair.
ERROR: init_ns_worker_ctx() failed
And target side shows:
Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout
Change-Id: Id72c2ffd615ab73c5fc67d36c3ff8b730cebcef7
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12975
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Install sshpass package from third party repo
as it is missing from official epel main x86_64
repository for Centos8.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ide1899393eabb838bcb686c30dc58e4538f10c12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12685
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch below changed the struct spdk_nvmf_ctrlr_data by inserting
spdk_nvme_cdata_fuses. This affects large number of nvmf interfaces.
(cbfd581) nvmf: Add NVMe fused operations to spdk_nvmf_ctrlr_data
Unfortunately was missed due to lack of rebase after ABI update on
CI machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifd06d0ddbefe9ea6c9715adae9881d4606e34b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13013
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Community-CI: Mellanox Build Bot
The pci address needs to interpreted "as is" (base-10) and not
converted to hexadecimal notation. Also, the number of fields also
changed where under newer pciconf, vendor and device IDs are
provided under separate fields.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ie540f11b9cde2dbbfe15a6aa449c4eab151c81d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12914
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We already list the libraries with their explicit
pathnames, so the -rpath-link serves no purpose.
Our Makefile was actually specifying this option
without an = sign - i.e:
-Wl,-rpath-link /path/to/lib
On the submitter's system, this resulted in an error:
cc: Missing argument for -Wl,-rpath-link
I have no idea why no one has ever run into this
error, except for this one submitter. But removing
the -rpath-link is the right thing to do here, since it
is not needed - so do that rather than adding the =
sign and continuing to figure out differences in
-Wl option processing on these different systems..
Fixes issue #2540.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6176e55701a5dea5b10bba1ad621250cb5cb51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12984
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
DPDK CFLAGS get put into CFLAGS in mk/cc.flags.mk,
which for system package installed DPDK will include
extra paths like /usr/include/<arch-3-tuple>/dpdk.
If a Makefile adds its own CFLAGS before including
the .mk fragment that pulls in these CFLAGS, we won't
actually get those cc.flags.mk applied since they
are defined with ?=.
This may need to be revisited - using ?= for these
has evolved through several iterations of our SPDK
configured flag files - starting with commit
08ec96eb. But for now, let's just fix these few
Makefiles.
Fixes issue #2548.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9863db1b37b31907b4088f58cc13b81ed1bb8632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12982
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add an option to stop nvmf transport advertising support for both the
compare command and the fused compare_and_write operation in vfio_user
transport.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I3900218c0e9884f86a5c8698a030f8106b64f2f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compare command, when not supported natively by the underlying bdev
is emulated by the bdev layer.
Change nvmf ctrlr data to advertise compare command by default.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I88646e6c1a7d7a2829be813ff0241661724bd127
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12918
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fused compare_and_write operation is always advertised by the nvmf
transport.
Add the fuses structure to spdk_nvmf_ctrlr_data to make advertising
fused operation configurable.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I73ee03dc8948f1d250cc0a8f0b8a3bde042a45e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12917
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are a few places we can replace existing license
text with SPDX license identifiers, that did not match
the auto-replacement script in the previous patch.
Make those replacements manually in this patch instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I258720c03bc2153d1c56a8adf6357f224b911c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reflect that we are kicking the entire controller.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If5723a5f485745ef0a2456942b6df1d54133815b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12665
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
This function is really about re-arming all SQs for a poll group;
refactor to reflect this.
This is necessary ground-work before we can support multiple reactors in
vfio_user.c in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I170fae2076fc80e742926cf448973671ac9e3bd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove output directory argument for core-collector.sh when
setting system core_pattern. Instead save the full output
directory path into a file to a known location and read it
directly in core-collector.sh.
The reason for this change is 128 bytes command line length
for core_pattern (see 'man core 5'). In case working with
long paths the core_pattern command line gets truncated and
core dumps are not generated.
Change-Id: Ia74c180e4923fb43d6ff66129ffe54c32827adca
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12755
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We cannot try to set multipath policy on a non-nvme bdev.
While here, make the error messages match what we use for
setting preferred path.
Fixes issue #2543.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I823077f92634ee3c16e77e7e0d67eb343ec3584e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12916
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
There is no 'python' package, 'python3' should be used
instead
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I8d55bf579038b9316e26e762b69e6c150869a66b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12804
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Only reserved fields were changed, so this does not
constitute an ABI/API breakage.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I130b9060d3de87377e66fa18b904a49fd1cf920d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12931
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From aio_abi.h, io_event.res is defined __s64, negative
errno is assigned to io_event.res for error situation
in Linux Kernel.
But from libaio.h, io_event.res is defined unsigned long,
so convert it to signed value for error detection.
Fixes issue #2325
Change-Id: I99f8b03e8bfedfa260fe91f3e9e8ef0e5ecd0b77
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12882
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Increase this -P(num-qpairs) value a bit to make the test run more stable.
Fixes#2539
Change-Id: If38281ab490a53387fd97d7a63d0413d5bd4c191
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12859
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
