spdk_for_each_bdev() can be applied simply to rpc_bdev_get_bdevs()
because the callback function rpc_dump_bdev_info() is synchronous.
spdk_for_each_bdev() cannot be applied simply to rpc_bdev_get_iostat().
The factored-out callback function _bdev_get_device_stat() is
asynchronous. Add desc pointer to struct spdk_bdev_io_stat and open
before and close after executing spdk_bdev_get_device_stat().
Replace spdk_bdev_get_by_name() by spdk_bdev_open_ext() when a bdev name
is specified.
spdk_bdev_register() checks if the name of each bdev is set and each bdev
is opened while collecting its stats now. Hence it is not possible that
spdk_bdev_get_name() returns NULL. Simplify rpc_bdev_get_iostat_cb()
based on this fact.
Furthermore, we want to fail the RPC for all failures. The callback
function to spdk_bdev_get_device_stat() is executed after stack
unwinding if successful. Defer starting RPC response until it is ensured
that all spdk_bdev_get_device_stat() calls will succeed or there is no bdev.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7b036d6d707c49d19c8922a159b12b5b5ce7ca41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12089
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use "generic" Fedora34 from Roboxes, as we did for
all other Fedora Vagrant boxes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I208264c50a067b26c9ec5da2250f27881ba8431d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12227
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Make pop-up details windows handle interface resize and
redraw themselves in the center of spdk_top window.
Change type of check_resize_interface() from void to int.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ib7d8e17c794eb4aab593a6057a1809ea678d633c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7398
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Creates new function to check interface resize.
This will be used in the next patch.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I147145be2db4fdab6f97b67baf3c2936abf7f6a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7499
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds the following after exiting popups:
-redrawing tab menu
-tab and core window refresh after closing thread pop-up
-update_panels() to refresh column names and lines
-redrawing tab contents
The goal of this patch is purely to improve visual
aspects of spdk_top.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I16952b75dd8e79521a41a8c2bda6fa62d43ccec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Set minimal required time for data gathering thread
to give display thread time to redraw all windows.
This is useful when user-defined refresh rate is set
to 0. With minimal required time hardcoded here, we
avoid multiple data refresh calls during one
display refresh (because drawing on screen takes
more time).
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I44ae808bc25eed36de60eccce30c8ecdeca5088d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7396
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changes refreshing of cores tab to work from within cores pop-up
refresh function. This works the same way as refreshing of
THREADS and POLLERS pop-ups and tabs.
Added a handle for core window and core info to display_thread().
The purpose is to allow threads popup to refresh already active
cores popup. Otherwise, there are artifacts left where core popup
was displayed.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I6471d5001989870a0c073f771cb8ed5acc05445e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7394
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move draw_core_win_content() before display_thread(), because
it is going to be used there in the next patch.
Change-Id: I2dee246f14bc95f7dcdd1641830114919b300630
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11237
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Separate drawing of core popup content from the rest
of the popup's functionality.
Change-Id: I60641d347528b08e2809d9678ca306d9db5bb823
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changes refreshing of pollers tab to be done from within poller
pop-up display function. As mentioned before, NCURSES does not
behave predictably, when different parts of screen are refreshed
from within multiple functions at a time, so the "control" of
refreshing has to be passed to one function.
Adds refreshing of pollers pop-up.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I37dcedc495c314462b252774d97410158e1b895d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7393
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separate drawing of popup content from the rest of
window functionality.
Change-Id: I00f4de51beb9e3bb61e4003dae8a341408466ff6
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changes calling refresh on different parts of spdk_top window.
refresh() function copies the virtual screen contents to the terminal.
With constant refreshes the terminal would blink. To fix this refresh()
is replaced with wnoutrefresh() calls, which only refreshes
the virtual screen. After all changes to the terminal are ready, one
refresh() is enough to draw everything on screen.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I16b526a1cac8f68dee833ae775cfddee131851d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7286
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds refreshing of threads and cores tab when thread pop-up is active.
Adds refreshing of threads pop-up and moved thread_win allocation and
poller number checking inside while loop.
Dynamic refresing of core pop-up with thread pop-up active
will be added in future patches.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I916f2b64a81db22e5caa32948094b4fce0b6577c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7391
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This check is going to be called in two places in the next patch.
The purpose is to eliminate duplicating code.
Change-Id: I1d739395453c083479c104e2774b1e0c01962bd1
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11234
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OpenSSL 3.0 deprecated the MD5_xxx APIs, so switch
the md5 code in the iscsi library to use the EVP
APIs recommended by OpenSSL instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic5e3cd6e30ebc8b027f0715434cc3be045f1b770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12240
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some SeaBIOS versions are not aligning virtio_blk_outhdr
on 8-byte boundary, causing ubsan failures. To be safe,
let's just make sure on our end that we only access a
properly aligned structure by copying this small (16-byte)
data structure to a local structure variable.
Fixes issue #2452.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iacad72c3a1759fb8dc5ba411272a34d93ef2a6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12238
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The raid bdev may receive IO requests after the raid layer
invokes spdk_bdev_unregister function. This patch moves the
raid_bdev->module->stop to the raid_bdev_destruct function.
Then there will be no IO after the raid_bdev->module->stop
is invoked.
Below is a way to reproduce this issue:
(1) create a malloc bdev
sudo ./scripts/rpc.py bdev_malloc_create --name malloc0 128 4096
(2) create a concat bdev base on the malloc bdev
sudo ./scripts/rpc.py bdev_raid_create --name concat0 \
--raid-level concat --base-bdevs malloc0 --strip-size-kb 4
(3) create a lvstore base on the concat bdev
sudo ./scripts/rpc.py bdev_lvol_create_lvstore \
--cluster-sz 4194304 --clear-method unmap concat0 lvs0
(4) remove the concat bdev
sudo ./scripts/rpc.py bdev_raid_delete concat0
In the step(4), the spdk app will crash because an IO request
is sent to the concat bdev after the concat_stop is invoked.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I76d6964ee9528d4590ed86e9c5c28d53e85da32f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can use lib/vfio-user API to setup BAR0 doorbells,
existing implementation is redundant.
Change-Id: Ib880d167c84c6b8482bf1a35559a34c939f6a02d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12211
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch for not running tests if ASAN and
Valgrind options are both enabled.
Fixes#2422
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I50c91bede687f0aee571c1f2540530a7fafcb49c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11998
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Crypto patch for increasing maximum number of crypto
devs applies to all DPDK releases since 21.11.
Change the conditionals so that the patch is applied
to any new DPDK version.
Also change the patch location to "21.11+" directory
to indicate that patch is not exclusive for 21.11
version.
Change-Id: I341f88958c6bf6c4d77909a06bf7ce91200cb70e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12159
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The config_bus_number is an offset within the config space reserved for
the devices behind the VMD, while bus_number refers to the actual bus
number assigned by VMD that depend on the VMCAP and VMCONFIG registers.
So, to access the mapped config space we have to use config_bus_number.
We didn't do that when resetting root ports', which could lead to
segfaults if these values were different, as we'd access unmapped
memory.
Fixes#2451
Change-Id: I4e7bbb81400462284014565099bec98f6171c8c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12208
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously g_packed_ring_recovery was set globally.
Setting that during controller creation, would affect
all previously created controllers.
This is now set on per-controller basis and only
enabled if packed ring feature is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idcc7231471446c805154648ab835a6af78f6543c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12040
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate parsing generic rpc vhost params form device specific,
this solution allow to create various device which share
common parameters.
Change-Id: I50b1a89a8260fb1394880a750591e95539995288
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
None of the current DEBUGLOGs are in any kind of
performance critical code path. Making them INFOLOG
means that we can enable them even in release builds
to get additional information if needed.
(Note: planning to do this with other libraries and
modules as well.)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61765fab843a06c36ac1979151589e8f57fea76e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12209
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Set the GPIO pin to HIGH during trap command.
This is to avoid errors in other test suites, when
hardware hotplug test returns with an error.
Change-Id: I953d42b8f87196a072c3b4530a38b9bf59c62316
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU version 6.2.0 update required due to
an error while configuring the installation.
On Rocky Linux, this prevents image building
by Packer.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibea66d927513c2716a5c53f62e6a043a081f2f62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Redraw only current tab's column descriptions upon
resizing terminal to avoid writing text from other
columns.
Change-Id: I50f2be79615b08f42b2f8600cdb95048eda8ab56
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11684
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test was written before reset was supported on NVMe-oF devices. It
should be working now, so go ahead and test it.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifce04542c4a6fdef1a33d094a5ea8d504dee6f24
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11595
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested MLX5 AES_XTS on DPDK 21.11.0, it works fine and this version of
DPDK can be used as the minimal required version for MLX5 AES_XTS.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ib7fd57695c51f3e10f5ec443ade06091e741414a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12147
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- MLX5 crypto device setup and run in blockdev.sh.
- Using "env_context" FIO config field to run FIO perf tests on MLX5
device.
- Wait a bit longer for tgt to start since MLX5 allocates descriptors
longer than the others.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I282872cf86528283a3a59e0a787ff516181d534e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
