This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter is now a string, not an integer.
Fixes issue #1518.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c187af69d7cdf1f60573a07bc1bacb58b5b78b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3581
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function bdev_lvol_create and bdev_lvol_resize actually passes in the size parameter
as bytes instead of magebytes.
Signed-off-by: Haichao Li <haichao.li@arm.com>
Change-Id: Ic47e799fb461c51816e696f2b03aa41ac517d421
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1906
Community-CI: Mellanox Build Bot
Reviewed-by: Yibo Cai <yibo.cai@arm.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The IOAT docs are pretty limited so what's here just mirrors those.
More documentation on the library as well as the module will be
provided as an ongoing activity.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28b13733f034fe117a4ea21983ce0418a427dd51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1925
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I066567f0f14d70e6744821e8e805934a3d790882
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by upcoming spdk_top application.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9ffcc3f2e36b8044bbc394938fc7a1dca1dc6892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_get_io_channels to retrieve IO channels
of the threads. IO channel don't have its own name and so get the
name of the corresponding IO device instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8fbb328ffba09e1eace35994cdbf36b24832b82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_set_cpumask to control CPU affinity of
the thread dynamically from outside of SPDK application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b6b794405f612200a2c3cb27dc4fc1ad2e88bec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an unique ID for each created SPDK thread. Use a single 64 bits
variable, g_thread_id, and guard its update by the global mutex
g_devlist_mutex. For our safety, further thread creation is not
allowed if g_thread_id rolls over, and request user to restart SPDK
application.
Besides, as a minor update, move the debug log down and add ID to it
in spdk_thread_create(), and ID is added to thread_get_stats RPC and
framework_get_reactors RPC.
The thread ID will be used to set the cpumask of the running thread
to the specified value in the subsequent patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09f11d4c7175c3b89acba6a42e76063acd0d1a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD026 Trailing punctuation in header
This rule is triggered on any header that has a
punctuation character as the last character in the line
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ab4894092ef6b5f920d89b74e43c2e46e9581c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This commit disables the custom identify handler by default.
The user has to explictly enable this handler via the set_nvmf_config
RPC or conf file.
Change-Id: I767816ba7639ebe78683993408ce6db02c7620fe
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the case that there is no NVMe bdev configured and RPC is
running, it shall still allow the NVMe options set. Once there
is one NVMe bdev configured, it will not allow the NVMe options
set.
Change-Id: Ib6a527174137a5d4df7babe206d2527e600500c0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Add an new RPC `framework_get_reactors` to retrieve list of all
reactors. Running threads on each reactor are included
in the output. Update jsonrpc.md and CHANGELOG accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I985d087dd41afe3033b7678af141ec8e5a2a822e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Thread's core affinity had not been visible to users. This patch
adds thread's core affinity information to the existing
thread_get_stats RPC. We can create an new RPC to retrieve
thread's core affinity information but using thread_get_stats
RPC will be enough for now.
Besides, the name of SPDK thread 0 is not reactor_0 but app_thread
now. So fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I634da46c411d648837538ebf227074d307273c97
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
CPU mask parameter was deprecated in v19.10.
If we remove the related code from the portal parser, we will be
able to use the parser for the iSCSI initiator to know the target
portal in iSCSI fuzz testing. So let's remove the parser and its
test code here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72ad4364323abda0f0ed10519b56244cd0c7612e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is used to calculate more accurate interval between two
calls of bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib561b056bc8095aa23d04cb5f9ae6f558b157124
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This RPC method will mount blobfs on bdev to one host
path through FUSE. Then on the host path, user can
directly do some file operations which will be mapped
to blobfs.
Note:
* The FUSE mount of blobfs can be umounted directly by
SHELL umount or fusermount command.
Change-Id: I7c322d978b39bbc7255fced345a749ad5bfa7077
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In a couple of docs and a .py file, saw while reviewing name changes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6a8b579ca692cdf6df1024e42eee76de5bde1227
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Following test/blobfs/mkfs case, add it as one RPC
method to let build a new blobfs on given block
device.
Change-Id: I0ffbb1add95dfbc8655e0238ed6f3cd519dd945b
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Zoned bdev properties were added to the result of the get_bdevs RPC
call:
- zoned: indicates whether the device is zoned or a regular
block device
- zone_size: number of blocks in a single zone
- max_open_zones: maximum number of open zones
- optimal_open_zones: optimal number of open zones
The "zoned" field is a boolean and is always present, while the rest is
only available for zoned bdevs.
Change-Id: Ib82b39d4ab20543d0a754dbc4c0317885fb831d1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the in tree applications don't really support these RPCs, keep
them out of rpc.py. We can add them in after the applications have been
modified to support that functionality.
Change-Id: I7aae2c623b6da48374fe53f8b9471b08e5f0af7a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
used for creating a new spdk_nvmf_tgt structure in the application.
Change-Id: Ib0182ea6d935b84b4fe4fcad79e173cb46859669
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the RPCs in lib/nvmf/nvmf_rpc.c rely on knowing which nvmf_tgt
they should work with. They have historically relied on the assumption
that there will only be a single target in a given application. This is
true for the example application in the spdk repo, but it is not
necessarily true generally,
By adding an option tgt_name parameter to the RPCs we enable them for
multi-target NVMe-oF applications. We also further reduce the coupling
between the library and the example application.
Change-Id: I03b6695da05a42af3024842ed87d2ce2c296f33f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The fact that all latencies were in microseconds was not explicit in all
of the help/docs for this bdev.
Change-Id: Id13fbb55af62c5f14fd2790e894c4c0646eb25f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to do interesting things in tests like configure a
bdev with a really long delay, and allow I/O to build up on a target to
see what happens, then decrease the latency to allow traffic to flow
through normally without ever having to delete and reconfigure the bdev.
Change-Id: Ibcb1101f8eed9fe3094ba239110cb4e49ace6554
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A single I/O may allocate more than one request, since splitting may be
necessary to conform to the device's maximum transfer size, PRP list
compatibility requirements, or driver-assisted striping. Very big
I/O request sent from application may get error due to limited resources
in NVMe driver layer, so here we add an optional parameter to make the
parameter can be configured by users.
Fix issue #745.
Change-Id: I7824232c54865b052dcd0ec6e91484c3837fc2c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds measurement of time request spends from the moment it
was polled till completion.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I1fcda68735f2210c5365dd06f26c10162e4ddf33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds statistics for pending state in NVMf RDMA subsytem
which may help to detect lack of resources and adjust configuration
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I9560d931c0dfb469659be42e13b8302c52912420
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA polling statistics: number of polls and number of completion
entries returned.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Iabcf2cb6f6a35f595b89b58cdfcd177a637dda13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds transport part to nvmf_get_stats RPC method and basic
infrastructure to report NVMf transport specific statistics.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ie83b34f4ed932dd5f6d6e37897cf45228114bd88
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452299
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This option was intended to enable the user to disable the c2h_option,
but because of the way arguments filter down through the python script,
it was actually impossible to disable the optimization.
My understanding is that typically we will want to keep this
optimization enabled on most systems, but the option should work like it
says it does.
Also, align the implementation of this function with the other ones on
the RPC i.e. use the store_true, store_false paradigm.
Change-Id: I59f0e9a573abf1d567e5539294c63c68899b35f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461737
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds statistics for BDEV IO pending state in NVMf subsytem
which may help to detect lack of resources and configure pool size
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I6c60c27efe3efed194b2d2c46a707af7c2808fe9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds number of admin and IO queue pairs per poll group in
NVMf statistics. It can be useful to troubleshoot load sharing issues.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2a9c0fc99cf5d0729eb130d30540ae52b5207fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add an new optional parameter dif_insert_or_strip to
nvmf_create_transport RPC.
.INI config file will be deprecated and dif_insert_or_strip is not
supported in .INI config file.
Change-Id: Ibf38b599cff75eeb0056dd2125d6ec10d444f339
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Only this update is missing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ee25eda8e1e83d3b17ab555ae816a37e0b208af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459414
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make construct_ocf_bdev call accept 'wb'
as allowed cache mode.
Previusly user could only create OCF bdevs
in WriteThrough or PassThrough modes.
Change-Id: Ic2e1c8d2905cb51fc13c080aa7b7a4dfd7d9387f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just a couple minor clarifications.
Change-Id: I6c368d263296f742d5bfb0df431d3bf40c800c6c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new param was added in a0cb5e9d [1], but never
described in jsonrpc.md.
[1] a0cb5e9d (lib/ftl: retrieve caching bdev from configuration)
Change-Id: I735644ffcf47abdede13a96ffddef8d1ce48c815
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
