The test verifies that bdev-based QoS settings are correctly applied on
NVMe/TCP devices. Other device types supporting bdev-based QoS will
share most of the code, so NVMe/TCP is a good test vehicle, as it's the
easiest one to set up.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic715483e888a7219fd27367d527201d75e8b69a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These helper functions can be used by any device manager that wants to
provide volume-level QoS support using bdev-based QoS mechanism. A
device manager is responsible for making sure that a volume exists and
is attached to a given device, but the validity of the QoS parameters is
checked within the helper functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4d0efcf190a64b289b4cfbdf872f77e40a013d1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The generic layer will now handle the SetQoS and GetQosCapabilities
requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icb4c916d3624c3943e2da74d6dbcc3261f90391d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6907498e369b58d2b3dd96981dfdba79ba87f6d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rename it to dpdk_pci_driver_register. This way we
follow the dpdk_pci_xxx naming convention for all
DPDK PCI structure/API dependent functions.
Also move it to the end of the file, to prepare for
moving it into the separate file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifca4110f737095a94f9db3d27525f5b9af0546c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14546
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This touches the rte_pci_device structure, so let's
make a separate accessor function just for that.
We will start putting the definitions for these
new dpdk_pci_device_xxx functions at the end of
pci.c. At the end of this series, we will then
just lop off the end of pci.c containing all of
the dpdk_pci_device functions and move them to
a DPDK-dependent pci_22_07.c file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0323fc19b51d21d1bac899df21d6ebf4354ab339
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14542
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
struct rte_pci_driver will become private, and its
size may change between DPDK releases. But we want
to keep the spdk_pci_driver structure generic. So
allocate 256 bytes of space for the rte_pci_driver
structure, which is far more than the 104 bytes it
currently occupies. We will keep a struct
rte_pci_driver pointer to this memory in spdk_pci_driver
which can be set up in the generic code. This will
make it easier in future patches to make sure that
anything actually touching the rte_pci_driver
structure will be in the separate DPDK dependent
files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29aa7e71137da25a5480b34c71f2e0d5c9c02eae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14541
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The previous version missed the case of return value of _nbd_poll
equals to 0,and thus,when using nbd with no io,spdk_top shows high
cpu utilization.Return idle when _nbd_poll return 0.
Fixes#2697
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: Ifa2ca3010e10250b5320a8282dfed3d97bea5105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
hpda value should be in range of 0 to 31.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie1329c831af06ccc8943a562c3f6396b635be518
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This function is small and called only once.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie4b11668e42a8920b3a9a11aa8cb83512f32942c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
spdk_bdev_close should be called on the caller thread. Saving the thread
now for both unmap and get stats, and executing the close in the
appropriate context.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I82192817d6012b0d41bbe2078fbd3f7dc01a7282
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14597
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If both allocation paths would fail, then the same mngt path would
execute rollback twice, leading to use after free error.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I55c9ea5131faabc930fd8ff92ddd9f8d0fd9a0b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14596
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This use case was missed during the initial refactor introduced via
008f8a8617. CI depends on it so allow to specify the target location
of the fio configuration and allow to skip call to the main perf
wrapper.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie41f9db40769980047f42475ce74e61c374c364c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, fedora36 is shipped with the 5.19 kernel.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia575e5063aa98819ed0e66ffee1e0aaac995f4fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A logic has been introduced to skip hole in files and
bdevs and so to copy only data. For files lseek is used, for
bdevs new bdev API spdk_bdev_seek_[data,hole].
Show progress function will display only affected size_unit
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: Ide2b0d825267603d45e00872ea719c8f0e82a60c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If passed as a parameter, block size must be a multiple of input
native block size, so a check to control this requirement has been added
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I38c41afd421083ba0864d5066d9978cb29bdaed6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14554
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
An example:
There are 3 c2h data PDUs for one read request. Data digest is
enabled, accel_poller is enabled. The first PDU will be offload
to accel_poller. Then the others will use CPU to calc the crc32c.
If the last PDU is calc done and the first PDU is not calc down,
SPDK will direct success the read request, and free some objects.
When accel_poller calc down, it will find the request is freed,
and abort the SPDK.
Disable multi c2hs async process to prevent this situation.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I03c9e5b30622bbe84523c0836aa93cfed672896
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14079
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we run the remove_attach_helper() function
in the background and hotplug application in the
foreground - if hotplug hangs unexpectedly, the whole
script will freeze.
This patch pushes hotplug to run in background to ensure
the control over the whole test is on sw_hotplug.sh
script's side. This way we can enforce a timeout and
stop the execution.
Change-Id: I5ae5e4e029f65faf5d41e2f7e1d576823d30ac33
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use fio "offset", "offset_increment" and "size" to
split target file into chunks, so that each fio
job clone (specified by "numjobs") gets it's own
part of the disk to work with.
This is especially helpful in case of sequential
workloads run with numjobs > 1 and helps to keep
the workload to being as close to sequential as
possible.
Change-Id: I1ca88ae56136d22cf396f464d78b05eff5c07a2a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When emitting the JSON-RPC text for saving the
current configuration, add the listeners last.
This is usually the preferred order when
configuring a new subsystem - it is better to have
all of the namespaces and hosts added to the subsystem
before adding the listener to allow hosts to connect
to it. We support namespace hotplug but there's
no need to unnecessarily generate hotplug events
if we can avoid it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79e8a0a496eeb128efbb7e314ac835b6110d3cc8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14586
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Prepare Beetles to use all available GPIO lines to
manage NVMe drives.
The two reasons are:
+ we want to test multiple NVMes instead just one
+ setting all GPIO will make it easier to physically
connect NVMe connectors to Beetles
Change-Id: I0351dd2e7cfef0a75eff0692be3c746ad1b5664f
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This function is called only once and can be eliminated.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0b3e80c025b60a816e2113f859907f95e96dd183
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14578
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
'nvmf_tcp_pdu_payload_insert_dif' can be done after receiving
whole payload data as an optimization.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I3054079427c25d102477ef8ec1b288631741d7a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24ab10a3021d52e71bb20cd2cdf748fa8713339c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
After a controller was hot-removed, if a reset sequence started to
the controller, spdk_nvme_ctrlr_disconnect() failed and caused core
dump in debug mode.
When implemented, how to cause the failure and how to process the
failure were not clear. Hence assert was added to detect the
failure.
We know how we cause the failure now. Let's handle the failure
appropriately.
If spdk_nvme_ctrlr_disconnect() fails, we are on the nvme_ctrlr->thread.
Hence call bdev_nvme_reset_complete() with failure immediately.
Even if spdk_nvme_ctrlr_disconnect() completes synchronously, the
completion callback is executed asynchronously when polling an adminq.
Hence set the completion callback only if spdk_nvme_ctrlr_disconnect()
succeeds.
Fixes issue #2632
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I11f61853aba9eca2515592f964a291e59def7247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By a recent improvement, failure of I/O qpair creation is ignored
if the nvme_ctrlr is being reset or scheduled to reconnect.
However, failure of I/O qpair creation is not ignored if a new I/O
channel is allocated. It is normal to allocate a new I/O channel
when a nvme_ctrlr is being reset or scheduled to reconnect.
Fix this bug by relaxing the condition to ignore the result of
bdev_nvme_create_qpair() to if reconnect_delay_sec is non-zero and
bdev_retry_count is non-zero.
If reconnect_delay_sec is non-zero, reconnect will be tried sooner
or later, and if bdev_retry_count is non-zero, submitted IOs will be
queued until it succeeds.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icf26e1ea65d292f9b8d24966abe25907d2cc33ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14446
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nigthly tests
It will allow tu use veth devices for TCP transport
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: Ia3d945b9ff3e7eb9f4cd8489d933757704f51ef2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14579
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
psh len is not the same with header len.
Add an assert in nvme_tcp.c to prevent this happen again.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ibc250752bedf3da8994f79c51fb01577a222d364
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This "if" is of no use here.
The state machine has the "NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_CH"
state means the pdu does not receive enough length of header.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Id50943f77b570fd337e2bb4e3b45281018d159e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA transport registers MRs for in-capsule
data buffers, commands and completions. Since
these structures are allocated using huge pages,
MR for these buffers are already registered, we
only need to translate addresses.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I90c53d8276d72077f7983e9faf9160e9ede52a7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These functions used to allocate resources
using calloc/spdk_zmalloc depending on the
g_nvme_hooks pointer. Later these functions
were refactored to always use spdk_zmalloc,
so they became simple wrappers of spdk_zmalloc
and spdk_free. There is no sense to use them,
call spdk memory API directly.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I3b514b20e2128beb5d2397881d3de00111a8a3bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since now cmds and rsps buffers are allocated
from huge pages, there are already registered
MR for this memory. In that way we can avoid
registering 2 additional MRs per qpair, just
perform memory translation to get lkey.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I2cb39a15e5d224698c293ac18af00a909840eaa8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
