Change 'bdev_nvme_compare_trids' to name 'bdev_nvme_check_secondary_trid'
and 'bdev_nvme_compare_namespaces' to 'bdev_nvme_check_secondary_namespace'
which better explain the aim of these function.
RPC bdev_nvme_attach_controller only response "invalid parameter"
if the path is not sucessfully added due to not meeting the conditions
in bdev_nvme_compare_trids. Add more log.
Change-Id: If9ba6ec1d397d49689aa2ed6ab74fbfa96e16afa
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
A new `oclass` parameter allow to specify DAOS DFS object class that is
responsible for data redundancy and protection.
Examples of the object classes could be found here: https://github.com/daos-stack/daos/blob/master/src/include/daos_obj_class.h
The default value is OC_SX for the max IOPS.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: Ia48681832458c2266eb7c3bcae0df2055e59e309
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
To fix issue: #2726
And also fix the examples/nvme/perf tool.
The srand() only needs to be called once to set the seed of
futher more calls of rand().
Change-Id: I41ab3a46593513516ad11ea7a5b8960b449e9867
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When crc32c is invoked with a multiple entry input iov,
only the last op has crc_dst set in order to write the final
crc value into the user supplied location.
spdk_idxd_process_events() for every successfully completed
CRC op writes the value into *op->crc_dst
UNLESS it is NULL.
The problem is that _idxd_prep_batch_cmd() that allocates
new ops left op->crc_dst uninitialized.
This results in a memory corruption (use after free)
in the following scenario:
1) op A is allocated an crc_dst is set to point to user memory X.
2) Op A is compeleted
3) User memory X is freed.
4) Ops B and C are allocated (chained), C has crc_dst set.
=> B reused op A memory and crc_dst still points to the
now stale user location (1)
5) B is complered, spdk_idxd_process_events() writes into X
as B->crc_dst = X.
Fix: _idxd_prep_batch_cmd() should initialize crc_dst to NULL.
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I9e7d57ec43a8fbcb3750906015a5cb7291278c35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were missing a check when ISAL uses the complete output buffer
on compression to determine whether it was s perfect fit or if
simply not enough buffer was provided.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I73532666f50cb9fbef3c42f6bfb25fc5c7de01c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This done due changes in latest Bash releases (>=5.2) which is
currently shipped with fedora36.
Fixes issue #2740.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id6e6f00eb4ae8b7f2b110848fd55e710368fcf94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Do not run test with message send using hello_sock client with
KTLS enabled. CI does not have systems that run with openssl-3
and KTLS and it fails under Fedora36.
This test should be brought back after systems do run openssl-3
on board.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Id7c46ced745fb4564b7428202a902cb332d30b33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14830
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a note about not supporting re-enablement of
static scheduler.
Change-Id: I073d904311a88bf812201ca2b1465dcbdc821792
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Prevent user from switching back to static scheduler after
different scheduler has been selected. Currently we
do not have a way to save initial thread distribution
configuration, so each time user switches from dynamic
scheduler back to static, the SPDK threads may end up on
different reactors. This would cause discrepancy in
performance statistics of SPDK managed by static scheduler.
Change-Id: Ic17a6be55eaea0e1a748f92e01f7075540403637
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This helps generate slightly better code in this function,
which can have a noticeable impact for high trace
event workloads.
Tested with bdevperf, single malloc or null bdev,
qd=32, 512B randreads on a single Xeon core.
Specify "-e bdev" to enable bdev trace events.
Null:
Before: 8.09M/s (123ns per IO)
After: 8.68M/s (115ns per IO)
Malloc:
Before: 4.21M/s (237ns per IO)
After: 4.34M/s (230ns per IO)
Note that each bdev I/O generates two trace events (START
and END) - meaning this change removes 7-8ns of overhead
for every 2 trace events, at least on my system.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7021b7f9e28b4a7cb16f8a97b4d4004ae165efd2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Support Aio bdev 'readonly' option in RPC call. The read-only flag
can be dumped from the bdev info. Any writes on a read-only aio bdev
will be fail.
Signed-off-by: Yuhua <yuhua@smartx.com>
Change-Id: I939f72479f8953a3678a8df3083ecce0f96844fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14955
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In a use case, a custom sock module supports zero copy for read.
The custom sock module wants to keep the recv_buf_size to be sufficiently
large, for example 16MB. However, most upper layers overwrite the recv_buf_size
by a smaller value via spdk_sock_set_recvbuf() later. This is not desirable.
To fix the described issue, change the meaning of impl_opts->recv_buf_size
to be the minimum size, and spdk_sock_set_recvbuf() uses the maximum value
among the requested size, g_spdk_sock_impl_opts->recv_buf_size, and
MIN_SO_RCVBUF_SIZE.
We may have to change the code to initially create a socket. However,
for most cases, the upper layer calls spdk_sock_set_recvbuf() anyway.
Hence this fix will be minimal and enough.
For the use case, it is enough to change recv_buf_size of the posix sock
module. However, the custom sock module may support I/O uring in future.
Hence, change I/O uring sock module together.
Additionally, for consistency, change the meaning of impl_opts->send_buf_size
to be the minimum size, and spdk_sock_set_sendbuf() uses the maximum value
among the requested size, g_spdk_sock_impl_opts->send_buf_size, and
MIN_SO_SNDBUF_SIZE.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I051ba7cb50bc9dcad229e922198b04fe45335219
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Also, clear generated fuzz logs upon successful test run - they may
get quite big (> 250MB) in size which doesn't play well with the
artifacts limit CI enforces. If the test succeeded then there's no
point in keeping them around for any potential debugging.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I240e8217cd50dba258310604c6985d8f6a832756
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The callback is executed with the opaque argument specified by the user,
not accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f4388d8c4ceb37d4df174a6f4c0529012fe1f28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't touch existing hp allocations when they already meet the NRHUGE
requirement. Introduce new environment switch, SHRINK_HUGE, to
override that new behavior.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0cd124b98c3deb7c21b4fbd57529d0995978c2e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SMA tests are now tested on CI, so they no longer need to be on the
skipped_tests list.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5746da06540efb1d3451a688fec4727d253bfc89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
When spdk_idxd_submit_crc32c() handles input
with multiple iovs (or multiple ops are generated
due to physically discontinuous buffers),
the first op has the original seed, while the
subsequent ops instruct the hardware to
to fetch the seed from the output of the previous op
(op->hw.crc32c_val):
void *prev_crc;
...
desc->flags |= IDXD_FLAG_FENCE | IDXD_FLAG_CRC_READ_CRC_SEED;
desc->crc32c.addr = (uint64_t)prev_crc; <<< virtual addr
The problem is the prev_crc is a virtual address,
so the hardware (at least with no IOMMU configured)
reports: DSA_COMP_HW_ERR1
spdk_idxd_process_events: Completion status 0x20
Solution:
Set crc32c.addr to the physical address of
the crc32c_val field in the previous desc.
Since desc->completion_addr already holds the physical address
of the dsa_hw_comp_record, we use this with the crc32c_val offset.
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I330e98c2f3fd6da5cb4fc03d0745df09a9ff0e0c
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14954
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Up until now, the protobuf files were all located under
`python/spdk/sma/proto`. This was fine, as they were only used in SMA
and we only generated python code. However, now, we would also like to
to output code for other (e.g. go) languages too, so it no longer make
sense to keep them under `python`.
Only the protobuf files will be stored under `proto`. The autogenerated
python code will remain under `python`, while the go code will be put in
the `go` directory.
While here, simplified the Makefile by removing a function generating
rules based on a directory, because we keep all protobuf files in the
same location.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4dcb7b33cd6f2930732f04dee62e35571b09315b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It allows the users to specify the path to the RPC socket on a NFS
mounted filesystem. This is necessary, because flock(2) on NFS requires
write access to place an exclusive lock.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If197498ed5bdcb4e02c5f2f2b2c1ef388872c457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14993
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Allow to run AUTOBUILD test in two versions:
* full - original one
* tiny - minimalistic, currently only check format and
check so deps
We want to reduce first phase of per-patch (called Pre-Tests)
by running only basic tests. To accomplish that we will run
autobuild test in tiny version. Full version will be executed
in second phase of per-patch (called Tests).
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I87d503ec272080ab238cf5129c44f92d8bb690ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Move the RPM builds away from autopackage.sh into a dedicated test
suite - this will allow the actual packaging tests to be run in a
separate instance.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23a824db7aa3a5e469bea9b2536a83ae0a5c8e04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
rpmbuild has a built-in variable that enables tracing for each script
template. This generates unecessary noise throughout the build part so
disable it there.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1a0010d518915d11af4a628b929edbc3b670d56e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Latest rpmbuild has an enhanced set of macros which define different
compiler flags inside the build environment. Their defaults, however,
may impact the overall SPDK build (and its submodules) in a bit
unpredictable manner. With that in mind, make sure that defaults are
not use and only flags specified by the user are kept in use.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie3a3123011a43be78f20f805ea6f8cad6571beec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0c8b5549080c1617a5eb0c1cc6145af6f1b0845d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
In case --with-shared build bundles with --with-vfio-user the vfio .so*
files must be also included for the applications to link properly. To
that end, create a separate package that will ship with these files on
board.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2c7e933b531b67a00e5af1e3b4dfbfaf8759d7ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ic53bd1733e2462c8d5c5d0ff057405fbcb20c19b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
make install already does that for us - from build/examples some
subset of binaries is selected but in the rpm scope it should be
enough.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3045711fc3daead9c255fc586600abe5796bc783
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
This can speed up these commands by passing, .e.g, -j N args as per
default defined in rpm.sh.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia64d3c0a0eef18e449e3020f31eaae8dd4caf483
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7b7e4118e3573d3d1ad83a50d4a980bd69c8c0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
To be consistent with our labels, lets call incoming issues
"sightings" and not "bugs". They become bugs once they've
been evaluation by the assigned engineer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0d4b8798ddd457aa950f4be23f101adb7251af71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As oppsoed to having steps to change to the SPDK dir and use
git submodule command to init submodules.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4b0d9fb242cfd41946a2cbba9e6de76db6374612
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9205871cb3c86fe5b02099d4b1307f84b3b5d26d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
The add operation is meaningless here. New ns should be added to the returned string, so replace + with +=.
Signed-off-by: Luo Yifan <luoyifan_yewu@cmss.chinamobile.com>
Change-Id: I7f0eaaec48d544e21892320dfc1451ebd2e7174e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
See:
https://review.spdk.io/gerrit/c/spdk/spdk/+/12893
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9dfd22e97645411bc24fdc0e62bb0dff9eed9abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I82d0cb1116b822f1a1111b19d2dd1286d8a399c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2c7b0c450f76057af31c9501c1b9ac843e0e1ee8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removed CentOS 8 from main CI jobs due to its EOL (Rocky 8 as
a replacement)
CentOS 8 is used only for v22.01.x branch testing
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ide5d3f392fd4dc06fb077ac3dc493c3832a52f89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
