This patch allows multiple iovecs as argument in spdk_dif_generate_stream.
Subsequent patches will support DIF strip and insert in SPDK NVMe-TCP
target based on the patch series.
Change-Id: I1f3d6c5b9f924bb52525e1611db403846d087563
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch allows multiple iovecs as argument of
spdk_dif_set_md_interleave_iovs.
Subsequent patches will support SGL data buffer in
spdk_dif_generate_stream too. UT code tests only
spdk_dif_set_md_interleave until then.
Change-Id: I7ac03a3c8f7bcd922af4f29b404ebf3acc4b89e5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously _iov_iter_fast_forward can fast forward only from the
start of the iovec array. This patch enables fast forward in the
middle of the iovec array.
Change-Id: I801fc46dec3c759e1d754042abe15e7100cbdc17
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By clearing head_align to zero after using it, we can merge two code
blocks into a single while loop, and replace goto by simple break.
Change-Id: Ia63cd0d7dbf4b9dddf7da93e11351bb46bd04791
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct dif_sgl had been used only to iterate the passed iovec
array. This patch utilizes struct dif_sgl and adds a helper
function _dif_sgl_append() to simplify to create iovec array.
_dif_sgl_append() is a static function and we have to add
the callee together when we add any static function.
So this patch adds both even if the patch size is a little
larger.
Besides, iovcnt has been used to mean the number of elements
in the iovec array widely in the DIF library. So this patch
changes the name of it from num_iovs to iovcnt.
Change-Id: I1db4abc8ed4d2c107fe01ec6592f5f6731dc5520
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously whenever bdev module went through init>fini>init,
the async modules would trigger assert in spdk_bdev_module_action_done().
This was because starting value for action_in_progress was being
set only once - during registration of the modules.
With this change, modules are set as async just before their init start.
Change-Id: If177a8dc97812b1b264cb61d5ad202ce47fca3b5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Set the PPA to FTL_PPA_INVALID during IO initialization to explicitly
mark it uninitialized.
Change-Id: I75ca1644b59501056f0d4ea8a4f446fd1b770045
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Removed unused 'context' parameter. Removed 'lbk' parameter from
next_ppa function signature, as it could be easily deduced from ftl_io
passed as the first argument.
Change-Id: I2b2b699ffc1b282086adcc2d4dc6c4691a87a7c5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Record last processed LBA instead of the first one when tracing IO
completion.
Change-Id: If16a6d0f5a82b5317ab391f9e49c6aa0f372ab97
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced all direct accesses to io->lba / io->iov with getter functions,
as they both should behave differently based on the FTL_IO_VECTOR_LBA
flag and io->iov_cnt respectively.
Change-Id: I0d387a2a908cc37afa9e1b97ca5b408cef0d6b08
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow user to set timeout for poller in management operations.
Now also all management pollers have 5 sec default timeout.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ic75f2b150ef21ccd673b80aa84f16c9a24f90e32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add stop function to management interface.
It is needed for error handling when execution has to be aborted early.
Example flow:
```
rc = op();
if (rc) {
handle();
vbdev_ocf_mngt_stop();
} else {
vbdev_ocf_mngt_continue();
}
```
This can be improved in the future, because currently, error
handling cannot be a management operation on its own (but should be).
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I9ba528db8a9957ee561e5c1b5528b16bd143d5d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We could run into issues with this if we were using an arbitrarily large
amount of cores to run SPDK.
Change-Id: Ia7add027d7e6ef1ccb4a69ac328dbdf4f2751fd8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change unifies the DIF library to use dif_sgl throughout.
Change-Id: I60addcf05e75b823e4dfb216122bf46edbc42e78
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using for loop is better for a few cases now.
Change-Id: I48e3a276fb860f2b969e7c331bdfdac8102172d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The struct _iov_iter has been used to iterate the passed iovec array.
Subsequent patches will share the struct among iteration and
creation. To clarify this update, rename the struct _iov_iter to
_dif_sgl. The name sgl has been already adopted widely in SPDK.
Change-Id: Iab81bcb0658fbd0e39305e045c3d0aadba8fc55f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new added API can load file content into a data buffer, which
can be used to read configuration file as well as JSON file, and
we can add WRITE API in future which can be used to implement the
persistent reservation feature.
Change-Id: I9aaca7571648e1ab6dbfdd7cfd6ca34083cbeec2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make this explicit instead of implicit.
Change-Id: Iab1b856648e1f11722e1f76602f1eee4bc4ed0b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace remove_base() function by smaller ones:
detach_cache(), remove_cache_bdev(),
detach_core(), remove_core_bdev()
This change is necessary for implementing asynchronous unregister using
trylock API.
Also introduce stop status variable because unregister path has changed.
Change-Id: I62599cafacdba685848bd7d32d3d5245907ee4a1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reorder function for register and unregister path to make code more
readable.
Change-Id: I3479b231de1f6a4f84f9538f345e62eb73e6847c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
stop_vbdev() is management a function so it should be one of the steps
of unregister_path[]. It will have to be when stoping is asynchronous,
but right now it is not a hard requirement.
remove_base() no longer calls stop_vbdev() because that was actually a
dead code.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ie2d87da0fbe7807efea084181ea386b323e6b9d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453653
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just for readability.
Change-Id: Ic2a62ded78146c5b8736b6b7daebda1f3d5e3c47
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some data is freed but is cleared to zero just before the free.
They are not necessary and can be removed.
Change-Id: Ia4d789ef77c22059c412ee3c974ab0cf068d6c67
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently the nvme driver will always log any
request completed with error status. Some
applications may not want this behavior. So provide
an option to disable it at the controller level.
When this option is enabled, any failed requests
from queues associated with that controller
(including the admin queue) will not log the
failed request.
Of course the application will still receive
the failed status code and can decide to do its
own logging there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia093fcd23cf321a820fd53183ee7e2dac4f9d378
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will (finally) enable resets for fabrics
controllers.
Move some of the work previously done in enable_admin_queue
up to this new disconnect/connect logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6239f0c0f36192db921d33f2322b1874b9382a01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used on the adminq, and set while the
qpair is connecting. It allows the qpair_process_completions
routine to know that it should still try to process completions,
even if the controller is resetting.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I377b9c934295eb5f45f03efd90c2a268defb4bd4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For fabrics controllers, the fabrics cmds are what gets
the controller out of reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6804874e867466669a55dff11a0a865add8bbc99
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We cannot complete error reqs from spdk_nvme_ctrlr_reset -
this could result in completions on threads not expected
by the user for I/O queues.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e266a2618f1791ef1a1b713d1940357f23f7bff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We are going to use it earlier in this file in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie388ca76370e53465edb73a99d191492580603c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires moving the function, but since it's so
small and the change is trivial, move and plumb it in
the same patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I69cf020736676d80c6426491865d2eb063e923df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The RDMA transport was the only one implementing this
function, and it only does a connect - not a disconnect
followed by a connect.
A later patch will add a matching disconnect function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib68eb0ff2f8e59f437d6d8831bb37dfddf83e9a4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will help us not iterate through the whole list of connections when
only some of them have pending recvs.
Change-Id: I681bc98befbdda4e77ef333b7a086c08b2708eb3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help save MMIO overhead. Especially in the SRQ case.
Change-Id: I6fb70cf6de4763450f97961f41ccdce3acec2e63
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will eliminate a lot of unnecessary verbose
messages, especially from cryptodev.
Change-Id: I000adfa524c86f6379ebab4ba2087a8d6fabfe5f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In prep for next patch where queueing a comp op requires
the poller to call a func that was previously below it.
Change-Id: I0ba8a00e958e0766f866a0cd49d7b288ea4cbe73
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will need this for upcoming compress patches so remove
from its current conditional linking and link for all.
Change-Id: Iba0cf0f529a0765b6d54f7f88eb86e516c5b89ee
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
I didn't test delete after making a bunch of channel changes so there
were some bugs in that path. Also as a drive-by I NULL out the
base_desc in vbdev_reduce_load_cb() to be consistent with other places
where I'm closing the base desc.
Change-Id: Iddd5dc704cde8eb7a6a5a3a8481e064a5c6c6d4e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Both for vhost SCSI and iSCSI target, IO channel is allocated to
LUN before using it. Hence LUN is not used by anyone if IO channel
is not allocated to it. So we can call scsi_lun_remove in this
case.
Change-Id: I6881a5e075ed6ef11802e1b166dfb3f35531d100
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have observed unexpcted timeout when we remove LUNs from the
active iSCSI target dynamically during FIO workload.
By making destroy_raid_bdev RPC wait for its completion, we could know
the destroy_raid_bdev RPC caused timeout because LUN hot removal didn't
complete.
By investigating the log, incoming I/Os from the host had not stopped
even after hot removal process was started.
The reason was that iSCSI target had continued to accept incoming I/Os
from the host.
By removing LUN from the SCSI device at the start of the LUN hot removal
process, iSCSI target will be able to stop incoming I/Os and LUN hot removal
will complete in finite time.
LUN itself can be accessible even after it is removed from the SCSI device.
LUN hot removal is for not I_T nexus but I_T_L nexus and so we cannot
start connection exiting in this case because connection can have multiple
LUNs. So this fix requires few changes and will be practical.
Fixes#715
Change-Id: I17d7a1f6c6557297289c3bd148a62db46da48ec5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When iSCSI target failed to start due to insuccificent resource like PDU pool,
one memory is double freed.
Change-Id: I1b68d4f0f130b024be9f8406c8d1611e92a27787
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids to get the first sync_req in the list, instead of
make sure which sync_req we want to make it complete.
Also release the request early.
Change-Id: If6f9b2ab10f0a93e6c45088d33f2aa78d25f66cb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
According to my code understanding, should be assigned
itself instead of req.
Change-Id: I0af4d56f8029269e0632bb6be6c9d912c7106cf8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that sessions have a separate flag to check if the
pollers are started, we can set the lcore field on any
thread we want. We currently assign it from within the
session thread to spdk_env_get_current_core(), but we
won't be able to use an equivalent get_current_poll_group()
function after we switch to poll groups. We will only
have a poll group object inside spdk_vhost_session_send_event(),
so that's where we move the lcore assignment for now.
Change-Id: Ib5fb37ec488de80e9d79432120c81500c297b608
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to rely on lcore >= 0 for sessions that are
started (have their pollers running) and in order to
prevent data races, that lcore field had to be set from
the same thread that runs the pollers, directly after
registering/unregistering them. The lcore was always
set to spdk_env_get_current_core(), but we won't be able
to use an equivalent get_current_poll_group() function
after we switch to poll groups. We will have a poll group
object only inside spdk_vhost_session_send_event() that's
called from the DPDK rte_vhost thread.
In order to change the lcore field (or a poll group one)
from spdk_vhost_session_send_event(), we'll need a separate
field to maintain the started/stopped status that's only
going to be modified from the session's thread.
Change-Id: Idb09cae3c4715eebb20282aad203987b26be707b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By creating a list of qpairs, we can avoid looping over every connected
qpair to process sends each time we poll.
Change-Id: If24bbc363176f52fbfb756d56719edd885a21a11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By batching ibv sends each time we poll, we can reduce the number of
MMIO writes that we do.
Change-Id: Ia5a07b0037365abfa8732629c34d34a9ed49ac70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved early read completion (due to cache hit or reading unwritten
data) traces to ftl_submit_read to keep them in one place. Also removed
the context parameter from next_ppa function, as it was unused.
Change-Id: Ic69174a6cdc0e626550cd673789e86bb891094bf
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replaced the unnamed unions with named ones. It makes the assignments
easier (it allows for direct assignment instead of having to choose the
correct union member).
Change-Id: I130233a096070092275a040e73cbaf36106ae1ab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes incorrect LBA reported by traces (it reported the next one,
as the IO position was advanced before storing the trace).
Change-Id: I788853d729dd25e90c6c899be0616aa3a79d08b3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved freeing the data into one place. Added error checks for all of the
pthread_spin_init calls.
Change-Id: Ic123f75f242fb71b92fcad5acf7b00588c2801c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Keep write buffer batches marked for resubmission on a separate queue
and treat them with higher priority.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If5bedcfea2e7650b36da231ec3e0cd54e8d2484a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Next patch will use this function earlier in the
file, so move the function now rather than in the
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50de44f69d0aedffddd251d00491912fd4a0f503
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12b4081d3cf57bda8b01911c25a9c13102a1115d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also fix call to this function that was treating the
print_on_error parameter as if it was dnr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f048e8873ae0fcf07c9c6d11329a3fb21d92bda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our log_ut currently dumps two buffers which end up being
printed with a different column alignment.
`00000000 6c 6f 67 20 64 75 6d 70 log dump`
vs
`00000000 73 70 64 6b 20 64 75 6d 70 spdk dump`
In short dumps (len % 16 < 8) we didn't include the extra
arbitrary whitespace between the 8-byte parts.
Change-Id: I00bf1d334f71370922d939c4397a479f8d707112
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452058
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function returns a pointer to the PCIe I/O registers for a controller
or NULL if unsupported for this transport.
Used for PCIe only, other transports return NULL.
Use with caution.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I849f9de9ad259a65b1eef9c1237345eb7195b9bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were accidentally removed in a previous
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idab274427c064ff8aff1cdca2dd80d7d24e8cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It isn't obvious why hosts are being disconnected at the moment.
Change-Id: I5515ba40883ccb20921d0da013b27670212bf649
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We marked the old set/clear/get_trace_flags as
deprecated in v19.01. These are now called
set/clear/get_log_flags (to reduce confusion with the
tracing framework). Use the new methods in this
patch series to mark these RPCs as deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ce8992ce8f6c1de5d5596b5f94a1587555e8546
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reduces some repeated code. I could have made both paths
call spdk_thread_exit(), but I want to add some stronger checks
around the tls_thread there eventually that wouldn't be valid
in the other path.
Change-Id: I61e1484536d8aef05f120d9ed394312b41f8445a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is all based on SPDK threads instead.
Change-Id: Idfd23d6541a548179be24b16540d62e5d7ea2a5c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make this return the next poll group instead of the next core.
Change-Id: Ie62dcbe0b3d869cc1a9b8f8b4ccce8f068ed4dfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Begin shifting away from being core-centric to instead
be thread-centric.
Change-Id: I0664cdef6766c158f793dd25cc47f6bbd7d928ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is only called from one spot, so move it near there.
Change-Id: I7e98ea9f95ba86e663566f6a1cbbc4f88d89a1d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Individual threads can have their own CPU mask. Attempt to
respect that in the scheduler.
Change-Id: I2bd08d4249bdae32a459ed8770b88090346be5dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepare to switch to spdk_thread_send_msg() which
accepts only one context parameter.
Change-Id: Iea3e8d1e715957d9b3fea12e969f29084a2948dc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The goal is to remove legacy event messages from vhost.
The new message passing API accepts thread objects instead
of lcore numbers and poll groups are meant to simplify
the transition.
Eventually we'd like vhost to spawn its own threads and
do message passing only within those, but SPDK libraries
can't spawn their own threads just yet. As a stopgap, vhost
will now maintain a list of all available threads (in form
of "poll groups" to mimic nvmf) and will start pollers on
them using its own round robin scheduler.
This patch only adds the poll groups list, it doesn't
change any existing functionality.
Change-Id: I89cc5da5df3612827c6fc9015f03c94b5f4a10ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost currently logs every received vhost message as
a separate log entry. Every VM (re)boot results in over 100
lines of output printed for every queue in every vhost
controller. In our vhost initiator test suite we've got
over 5k lines of those in total. These logs do not help
in any debugging, so we disable them now. We'll still print
vhost messages of log level >= NOTICE.
Change-Id: Ief3f4230056478472412b13efc4da438b92b1d18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/371691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Valgrind reports error "epoll_ctl(event) points to uninitiazlized
byte(s)" when running unit test. Fix it by initializing variable event
to a known state.
Change-Id: I756687c1077eeb632c045c316a76714aa453b918
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453525
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This transport function is a complete nop now, so
remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cc6ac75795a3cf5311f24e2ac293fb53d4b9f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to move more of the reset-related
functionality to the common layer, as part of enabling
resets for fabrics controllers.
The transport qpair_enable and qpair_fail functions
acted similarly - so those are both removed now and
replaced with this new qpair_abort_reqs function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9486630ad5b807239b0b5bcde50e8cfd313695d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will move the actual is_enabled
logic to the common layer as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fd4d8712280295f57134ad66f8ccbfe9736d30a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvme_qpair_disable functions will be going away in
an upcoming patch, so move this one bit of functionality
into a helper function in advance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c2de535c2230b988d56dea13b00f39cb59dcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We submit AERs to all controllers - both pcie and
fabrics. But currently we only manually abort the
aers when disabling the qpair for pcie. Make this
common instead by creating a new transport function
for aborting aers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e926b61b8035488cdc6e8cb4336b373732f985e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows us to reconnect the qpair in the future,
avoiding reallocating memory every time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b86d89d8ebee27125b6081fd3845718e1118d5a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better explains what the function is doing,
and makes the name more general so we can use it
for the adminq as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b55761cb141a9a79cdef876be47995d8813b312
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This moves us towards not freeing and reallocating
this memory if and when we reconnect the qpair.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic20d3c221442f6206d161760a8bfa7f9b8989d4c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will simplify some upcoming changes to reconnect
a qpair. In these cases we only need to re-register
the memory - we shouldn't have to allocate it again.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8adff313f191fbf11d7502127a2b961f2ca2f6e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make examine work with asynchronous bdev startup.
We need to count references of bdevs that are being examined,
for the case when single cache bdev is referenced by multiple OCF
vbdevs.
The construct function is not in fact asynchronous yet,
but will be after adopting "trylock" API. Adopting trylock
requires a lot of changes, so this patch is really to split
implementation.
Change-Id: I6ac091f2dd48462e74aa89cf54acb0306c30673b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
And change type name of callback as well. The new name is more accurate.
Change-Id: I13b63f7d33f60ecea7fdf6e50f57aa6a391a4562
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And change type name of callback as well. The new name is more accurate.
Change-Id: I3c9cef591faa077a5a034c6f31c44c6f7aefc1fa
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Traditionally, The C function name of rpc method "method_name" will be
"spdk_rpc_method_name", so make these function names consistent with
others. No behaviours changed.
Change-Id: Iac5396d4860bdbd78cba9031b4b6358161ec779b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is the end of the patch series.
Make destroy_raid_bdev RPC Wait for completion of spdk_bdev_unregister
to the raid bdev by using callback function.
Change-Id: I3ed157ee71e3b8e6dc14b5b66732baba516eacce
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We have to process only the first call of destroy_raid_bdev RPC
for the same RAID bdev.
The existing flag destruct_called cannot be used for that purpose
because of the following reason.
destruct_called is set to true in both of
- destroy_raid_bdev RPC
- hot removal of any base bdev.
If destruct_called is set in destroy_raid_bdev RPC, destroy_raid_bdev
RPC must return immediately, but if destruct_called is set in hot
removal of any base bdev, destroy_raid_bdev RPC must go forward
with the current logic.
Hence add another flag destroy_started to struct raid_bdev and
use it.
Change-Id: Ifeefcaa1d289499342d8bb9bc162ded65e0368dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will be used to help rename our existing RPCs
to a standard consistent naming convention. Old
names will still be registered with this new macro,
to keep backward compatibility. The first time
a deprecated alias is used, it will print a warning
message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieaedf86a68531f9d56742fefe272c4d602fce6c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also print error message when a duplicate is detected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibcc667700a5b410e3a300507e76b99d04b09cfc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Print these out for the RDMA transport.
Change-Id: I44ab01088fcab180540a93e024855322036241db
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to truly support multi-sgl inline requests in the RDMA
transport, we would need to increase the size of the
spdk_nvme_rdma_req object dramatically. This is because we would need
enough ibv_sge objects in it to support up to the maximum number of SGEs
supported by the target (for SPDK that is up to 16). Instead of doing
that or creating a new pool of shared ibv_sge objects to support that
case, just send split multi-sgl requests through the regular sgl path.
Change-Id: I78313bd88f3ed1cea3b772d9476a00087f49a4dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function was only called from a single place, so just
move the code there.
Change-Id: I78c05ef41ca0d5684385e80cb75d699453c90792
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This went stale and the code is currently in flux.
Change-Id: Ib0b2171f253db0f54d41573c07668eb3b2bd83b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, this searched the list of cores for the one
with the fewest connections and scheduled there. iSCSI
is being migrated to a new threading model where the
threads themselves will float, so simplify this part
of the code while that's implemented.
Change-Id: I05a1ff51a45df9c176c0e57d7f1ae9e97928adcd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't need to have operations to remove just the socket.
Change-Id: I00e0c7fb81af98d1c072ba126ce22b41954e313b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For migrating a connection, don't stop it entirely.
Change-Id: I0e09698e03127c04257485a0a2af262ed1a7761a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Typically we just pass the bdevs supported IO types
for each of its partitions. But that doesn't work
for partitions with non-zero offsets since we can't
decode/modify the NVMe command in the bdev layer
to account for that offset. So just don't allow it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38a766fcc39d5f068b31245bf1a47dbb79c8f8dd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was bdev-specific code that has been made generic
but we missed removing this "split" name when moving
the code.
We don't need a name here really - SPDK_ERRLOG will
tell us the file and line number of the error which is
sufficient.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d19b947c48407bfd99058b78325108c2957b391
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Prepare vhost lib init to be asynchronous. We'll need
it for setting up the upcoming poll groups.
Change-Id: I3c66b3f17f8635d4b705dd988393431193938971
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put all shutdown functions in a single place. This also
lets us remove one forward declaration.
Change-Id: I8c8c602e67e3dafd3cd5e80bc9dd90f23381711e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Switch to the new spdk_thread_send_msg() API instead.
Change-Id: I810465cc49d5c4ef23e04953aa29d369f48f68b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're about to drop legacy event messages from SPDK libs
and for that we'll replace various lcore numbers with
spdk_thread objects. For now SPDK libs can't spawn their
own threads, so they must use spdk_for_each_thread() and
spdk_get_thread() to retrieve different thread pointers.
The vhost library offers API to construct a vhost device
to be polled on specified cores, and in order to keep that
functionality we'll need to know which core each thread
is polling on. We would like to achieve that with
spdk_thread_get_cpumask(), but right now it always returns
all cores, so this patch changes it to return just
a single cpu on which the thread is actually pinned. It's
only a stop gap, eventually the vhost library will spawn
its own threads with custom cpumasks.
Change-Id: I15947727123c51b23f63727d52079770bfb2e07b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Here g_num_poll_groups is not less than 1 now, so this assert is
redundant.
Change-Id: I4fc539480e2b63c8302af57b18d2164b5161b094
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The individual transports will adjust these sizes when
necessary. In fact, we have to remove this check, since
RDMA transport may adjust the io_unit_size based on the
max number of SGEs - and can adjust it to a value that
will fail this check if we reload the configuration.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2708c7f5aaa54a368ec932ec40dd6447f1a4fde0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452474
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
They were removed from the trace API and BlobFS doesn't
compile right now.
Change-Id: Ie98339f19353e4db901af551c706f57c18b89fc5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove SpdkFinalizeThread. It is no longer needed - the
thread-local destructor handles the cleanup.
Keep SpdkInitializeThread but make it static. We still
need this function for the main thread, so that it can
be explicitly called after the filesystem has been
loaded.
Part of this patch moves the rocksdb_commit_id to a
version that doesn't make calls to these functions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9aefdfede7e5636085079d2226ec1c4d2cae406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This restriction helps reduce the amount of padding when
printing out the event trace, allowing it to fit in a
small number of columns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa31e5a6967c7b9bc7028069effb71533f80596f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function is in charge of scheduling new connections
onto cores. It used to be used to dynamically migrate
connections, but we no longer do that.
Change-Id: I2fa04a7dfb43bf9fae7902376ba5ba6d18744469
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can use threads instead of events.
Change-Id: I8a55ad512038dd75218a9a6af17d135eba6949f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During connect call based on queue type (AQ or IOQ), SQ size should be
validated against max sq size for that particular queue type.
Change-Id: I977d7556e4d04e37004d16c87efffd3b467fa62c
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the rpoller->srq to check if a qpair is valid when processing
recv completions.
Change-Id: I6aa360adc48a3312ddcf79f10e2a65b502a7314f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We could return from spdk_for_each_thread() without
unlocking the global threading mutex, rendering the
entire SPDK application useless.
Change-Id: I641c7b36db996f9a36310332279648014579de83
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They're only used in that single file.
Change-Id: I929d00156bdd0e81adaac0281560d7f6e13394f8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_malloc() is not required here, as the buffer
is neither DMA-able nor shared between processes.
The buffer is used to store the scsi response as it's
prepared. At the end it's always memcopied to possibly
multiple DMA-able buffers in the scatter-gatter list
provided by the upper layer.
Change-Id: I92fcede67dc24c532b13399f6364b071b2aeeb56
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Send the given NVM I/O command, I/O buffers, lists and all to
the NVMe controller.
This is a low level interface for submitting I/O commands directly.
This can only be used on PCIe controllers and qpairs.
This function allows a caller to submit an I/O request that is
COMPLETELY pre-defined, right down to the "physical" memory buffers.
It is intended for testing hardware, specifying exact buffer location,
alignment, and offset. It also allows for specific choice of PRP
and SGLs.
The driver sets the CID. EVERYTHING else is assumed set by the caller.
Needless to say, this is potentially extremely dangerous for both the host
(accidental/malicionus storage usage/corruption), and the device.
Thus its intent is for very specific hardware testing and environment
reproduction.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I595fe02fe0dfa9c3ceba1ac116b6900357b02d2c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove an unnecessary empty line and fix typos
Change-Id: I54e63e39dda23063c3fcbdd709cafec4278b130a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add callback for construct function.
It is not asynchronous yet, but will be after
adopting asynchronous OCF API
Also adopt RPC construct call for this change.
This is done in this patch because (1) change is small (2) leaving
implementation as TODO still requires implementing a mock because we
decided that callback should be required rather than optional.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ib6a78e2caf34ac057d4da53ad5dda47163e8a089
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add vbdev as another argument in callback of vbdev management operations.
This is nice for async version of vbdev_ocf_construct() which uses mngt_
interface and creates vbdev structure.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I8c88e0a881855b9f22fcf1f8174c888f3cfd6828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452145
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For now, just do events for open, close and start/end
for writing the length xattr. These will be useful for
debugging the intermittent RocksDB failures.
Note these events may only be recorded on the polling
SPDK thread. SPDK events cannot be recorded on
non-SPDK threads (i.e. RocksDB user or background threads).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72fb302db23b399f583f56194c237340587f3027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When new writes come from different threads, cluster allocations can
happen many times at once. The corresponding cluster number for the map
is determined via _spdk_bs_allocate_cluster() and kept in ctx->new_cluster.
The cluster itself is inserted into the map only on md_thread.
When there is conflict of two threads allocating same cluster,
message is returned to the losting thread to release the cluster.
Before this patch, on such failure the cluster to release
was calcualted from the page. This resulted in releasing the
cluster claim for thread that actually won it.
This patch makes it so that cluster allocated and save in ctx
is used instead.
Change-Id: Id10811b887f673f9b89e41e0637d4422f1d7270d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3858c637d421b58e74fa5573d257e59fed92824a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch add new _spdk_bs_delete_blob_finish function
which will be helpful in future changes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2d492b6102f33ad35b7b6fe408f709f54b7b2341
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new function which is used to check
if blob can be removed when requested.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafa82fba9bf67ffd15cf639f4665087f054b6b7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch creates new function that will be helpful
with further implementation of 'delete snapshot'
feature.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I66f138ba217fb4a4186f2703900a2952cdb8e438
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452240
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needs to be based on the compressed vol size which is smaller
than the backing io device.
Fixes issue 763
Change-Id: I917c98e86a0755e503d5ba3d4b6c02e42f9ed709
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It used to be that we would get async events very infrequently. However,
with the introduction of SRQ, this number has gone up tremendously.
Change the way we report our these events so that we don't spam/confuse
people running the target.
Change-Id: I33070281fa854cbc17784d61bbbb870196ca8780
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are outstanding recvs for a qpair when it is destroyed, we need
to clear the qpair from it before reposting it. Otehrwise, we have a
potential heap-use-after-free of double free (depending on whether the
recv completion is in error state or not).
See github issues #730
Change-Id: Ic2009c761cbcc5e89174f62fbd0872d0489c67ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At some point this parameter may have been a bool, but it's
not now - so we need to explicitly pass SPDK_BLOB_READV or
SPDK_BLOB_WRITEV.
Otherwise we end up trying to write the iovec array as the
data buffer when executing this operation later - since we
passed "false" which is treated as 0 which is
SPDK_BLOB_WRITE (not SPDK_BLOB_WRITEV).
Fixes issue #603.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50df736216c4a88b40604722c021e204c7fac623
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452157
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other threads are referring to this memory.
Change-Id: I9689a1b64a1f032ad479ec85095d2575dcab3a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There's some more work needed to clean this up, but this
at least gets RocksDB working for now after the following
patch which enables dynamically specifying the RocksDB
commit ID.
Note that for now, we've modified the RocksDB BGThreadWrapper
to call SpdkInitializeThread() explicitly. We'll be able
to move that in the future, but for now we check whether the
channel has already been allocated so that this extra
SpdkInitializeThread() effectively becomes a nop.
Note that for the main thread, g_fs hasn't been set yet, so
we can't allocate the thread_ctx. So we still need an
explicit SpdkInitializeThread() call in the main thread.
This has the nice side effect of removing the need for SpdkEnv
to override Env::StartThread - so remove all of the code associate
with that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e8d12b74e688953e15d5d6df58b93e3f5b74c3d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452112
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reset the device to its factory defaults.
Change-Id: I43f7dc8fb7bd5226283a4762beac0e2cf016f698
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
_spdk_bs_blob_list_remove function returns only 0
so it can be changed to void function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1827d783a7cd18caf831275554e33f398b0b962f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are no guarantees of the order of completion
of NVMe IO submission queue so wait for write completion
on specific chunk before submitting another write to it.
To control chunk occupancy split IO to child requests
and release chunk in IO completion callback.
Change-Id: I44147a21b528a7f33fb92b9e77d7de8f5b18f8ff
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7a7667e1c4e6321150e5bc8eb4287fb61847ccb5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Block operation that should not be done simultaneously.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3cab510377a49be4e5847ba37a6218f0025c0db6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450014
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently someone can create clone while blob is being
opened for deletion. This patch moves check for blob if
it is a snpashot after the blob is opened.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia4b8b7cb956522a29784aa349d677eb87886e4db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also make some modification for invoking process in
nvme_manage tool.
Change-Id: Ib54db43d7336d3e839e7d9317c292b9a57b38f80
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended the IO descriptors with the ability to group them together in a
parent / child(-ren) relationship. It allows to delay parent completion
until all children are done and enables the children to have additional
context in their completion routines (as opposed to having a single IO
describe all requests).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6ad111dc231813e397697109a333e2a5d7f5941d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's not an error if the NVMe hard drive was formatted to 512 + 8 but
has no protection type, so we will also disable the protection for
NVMoF target.
Change-Id: I07e605cff9545f46c642f7ca783a4727a26abece
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a Namespace was removed all the field will be zeroed, which
may lead to being divied by zero error when IO is running, especially
with perf tool. The perf tool doesn't add hogplug support, so
we add the additional check here to avoid such issue.
Fix issues #728 and #629.
Change-Id: I0e387c8c1bd4f3d40130377e2e0f5143f43be6a3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451762
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do technically support initiators without eventq or
controlq, but the lun hotplug/hotremove path expected the
eventq to be always present.
This was causing vhost to randomly crash in the fuzz tests.
Specifically, the crash happened if lun hotplug was handled
while a VM was in the middle of switching from BIOS to OS.
We fix it by checking if eventq is set before putting
any event there. LUN hotplug and hotremove won't work
without an eventq, but the entire session will be restarted
after new queues are initialized. This will make the VM
retrieve all up-to-date luns after OS initialization is
complete.
Change-Id: I5d28cbedad8fb2a35ede5a491aeb7fdc52faad06
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_malloc() is not required here, as the session
array is nether DMA-able nor shared between processes.
Change-Id: Ia9218d00eea8a3207abf07c1d78eaa585ffcad2c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
logical_block_size and geometry_logical_block_size are uint32_t,
so correct conversion for endianness is used now.
Change-Id: Iaa5ff576da8bc4ca65fa21f28eb3afd30507b00a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before enabling SPDK thread scheduler,
each POSIX thread name was reactor_% (% was the core number).
After enabling SPDK thread scheduler, the name of the master POSIX
thread is reactor_% (% is the max core number), and the name of the
slave posix threads are lcore-slave-% (% is the current core number).
SPDK threads are light-weight threads - sometimes also called
green threads or fibers, and so are independent from posix
threads.
But reactor is tied to the POSIX thread in the SPDK event library.
So SPDK thread doesn't rename the POSIX thread at its creation
but reactor renames the POSIX thread at start instead.
This change makes POSIX thread name compatible between before and
after enabling SPDK thread scheduler.
Change-Id: I26e8dabc73e163c9f74e18b3640cf54954603b1f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451712
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be used in next patch to ensure synchronous
threads wait until any background operations are done
before freeing its request memory, and also to print
errors if internal channels have outstanding
requests when freed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24bc8096f84b70270f87b051f9034ed08e639500
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451780
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All error paths must free opts->nodebase and opts->authfile.
Change-Id: I655f112dd36bbd0dca6050bc5cc3ade1a5b05b7d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow users to optionally specify an affinity mask when
creating a thread. This isn't currently used, but we want
the API to be in its final form for the next release.
Change-Id: I7bd05e921ece6d8d5f61775bd14286f6a58f267f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the use of spdk_uuid_compare() to be consistent in the file,
also change the SPDK_INFOLOG to SPDK_DEBUGLOG to avoid the
repeated log messages for RESERVATION CONFLICT response.
Change-Id: I72fefbd520cefcaf25182c3ca3d21e3d87d17e94
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The mode of dmb oshld can guarantees cpu sequential execution,
which has less impact on performance.
Change-Id: If30b6a682a2216eecd1da039267ed4f5471afc38
Signed-off-by: h00448672 <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, when creating a snapshot in blobstore the snapshot's cluster map
was copied from the "original" blob, with the original's map zeroed. These
operations are both O(num_clusters*cluster_size/page_size) while io
operations are frozen. This change replaces the linear operation with an
O(1) pointer swap at the critical moment that io is frozen, while
doing the zeroing before the freeze when preparing the snapshot to
minimize freeze time.
Change-Id: I1e468bc97623f5da161a8ddba1393c271acd3aed
Signed-off-by: Amir More <habeanf@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451486
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the device
object is neither DMA-able nor shared between processes.
The device structures used to be aligned to cache line
size, but that's just a leftover from before sessions
were introduced. The device object is just a generic
device information that can be accessed from any thread
holding the proper mutex. The hot data used in the I/O
path sits in the session structure, which is now allocated
with posix_memalloc() to ensure proper alignment.
Vhost NVMe is an exception, as the device struct is used
as hot I/O data for the one and only session it supports,
so it's also allocated with posix_memalloc().
While here, also allocate various vhost buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic7f63185639b7b98dc1ef756166c826a0af87b44
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
They used to be allocated with spdk_dma_zmalloc() which did
provide zeroed memory, but we unintentionally changed that
when switching to posix_memalign.
The structure might have some unitialized memory, so with
this patch we just memset it right after allocating it.
Change-Id: Id5a5685e09419901513925abaeed605c36f5199a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
blob_delete_cb() takes spdk_fs_request as the input
parameter.
Change-Id: Ie6150e7d31d187296a448e82784e2ac2fecfe52c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
fs_truncate_complete_cb() takes spdk_fs_request as
the input parameter.
Change-Id: I0413fecd30a1f7cb6528b502848fa999454ba638
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For existing filesystem APIs, SPDK can only support
1 data buffer, we add the iovec data structure here
so that it can support multiple buffer vectors in
following patches.
Change-Id: I26984f3ea985f349a5016060e0801e3989ce2fc6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450722
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We did this a while ago for login notifications - do
it for logout as well.
While here, just use SPDK_DEBUGLOG instead of printing
to a buffer first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I77f566d139cd818428371ec887efeca6eee08898
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451062
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch changes iscsi_tgt_node_destruct to be asynchronous.
spdk_iscsi_shutdown_tgt_node_by_name() uses the callback
provided by iscsi_tgt_node_destruct(), but
spdk_iscsi_shutdown_tgt_nodes() doesn't use it.
The reason is that during shutdown all sessions are terminated
already, and spdk_iscsi_shutdown_tgt_nodes() doesn't need to
wait for the completion of iscsi_tgt_node_destruct() by using
the callback. iscsi_tgt_node_destruct() will complete immediately
in this case.
spdk_scsi_dev_destruct() is not asynchronized yet and so
iscsi_tgt_node_destruct() calls its callback directly in this patch.
The next patch will replace the call.
Change-Id: I86911c5297a93560551e0404d6ea85f49d647c22
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes spdk_rpc_delete_target_node() to pass
rpc_delete_target_node_done() and its context to
spdk_iscsi_shutdown_tgt_node_by_name().
iscsi_tgt_node_destruct() is not asynchronized yet and so
spdk_iscsi_shutdown_tgt_node_by_name() calls the callback
passed from the caller directly for now.
The next patch will replace the call.
Change-Id: Ide2d9fcc6738e02de19f91249c21ac2d0d37138a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
delete_target_node RPC had not waited for completion of
spdk_iscsi_shutdown_tgt_node_by_name. This implementation
is not the direct cause of the deadlock issue in
spdk_iscsi_conn_stop() but changing delete_target_node RPC
to wait for completion of spdk_iscsi_shutdown_tgt_node_by_name
will prevent future errors.
spdk_iscsi_shutdown_tgt_node_by_name() is not asynchronized yet
and so rpc_delete_target_node calls rpc_delete_target_node_done
directly in this patch.
The next patch will replace the call.
Change-Id: I6a042028b93c36ca9f68e3b212141e101b33d394
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When any iSCSI target is destructed, if the target exits all corresponding
connections first, destructing SCSI device will be easier.
Hence, iscsi_tgt_node_destruct() starts exiting all corresponding
connections. Then it destructs SCSI device immediately if no active
active connections, or waits for the completion if there is any
active connection for the target.
Change-Id: Ibd4a29789faecfefccefa1153a519c43d040a00d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In iscsi_conns_cleanup(), g_conns_array was unmapped but was not
invalidated by setting MAP_FAILED.
So, find_iscsi_connection_by_id() caused segmentation fault if
it is called after iscsi_conns_cleanup().
Change-Id: Ib91c9240c62c2aaa32713dd4aa382d31e5ea2eed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In case of a DSM Deallocate (unmap) with multiple ranges, individual
bdev IOs are submitted for each range. If the bdev IO cannot be
allocated, the request is queued on io_wait_queue; however previously
submitted ranges may complete before memory is available for the next
range. In such a case, the completion callback will free unmap_ctx,
while the request is still queued for memory - causing a segfault
when the request is dequeued. To fix, introduce a new field tracking
the unmap ranges, and make sure the count is nonzero when the request
is queued for memory.
Signed-off-by: Yair Elharrar <yair@excelero.com>
Change-Id: Ifcac018f14af5ca408c7793ca9543c1e2d63b777
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447542
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The previous patches described as optimizations also
fixed some issues. They seem sufficient to cover all
the error cases, but the real source of the problem
lies in foreach_session() initiated by the device backend,
which can use sessions that were never seen by the
backend.
The backends are only notified when a session is
*started*, but foreach_session() iterates through
all the sessions - even those that were never started.
Vhost SCSI, for example, in the foreach_session() callbacks
used to expect svsession->svdev to be always set, but
that field is only set when the session gets started.
A perfect solution would to introduce a new backend
callback to be called on new connection. Vhost SCSI
could set e.g. svsession->svdev inside. For now we go
with much easier solution that prevents sessions from
being used in foreach-session() unless they were
started at least once. (...and e.g. got their ->svdev set)
Change-Id: Ida30a1f27f99977360d08a71a64fc92931b25b75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449394
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Before SCSI target is removed, all vhost sessions need
to drain their pending I/O and put their I/O channels.
After a session puts it channel, it sends an async
notification to the entire vhost device. The device
will check if there are any other sessions still
referencing the SCSI target and if not - it will
continue removing the spdk_scsi_dev object. There may
be multiple sessions sending those async events at the
same time, and while we do protect from removing the
same spdk_scsi_dev twice, we can still remove
a different spdk_scsi_dev that was hot-attached in the
meantime with the same target ID.
1. SCSI target hotremove (e.g. via RPC or bdev hotremove)
/ \
/ \
session A session B
drain I/O drain I/O
| |
v |
done v
send event done
\ send event*
\
All sessions have detached the SCSI target, remove
it from the entire vhost device. From this point
a new target can be hot-attached (e.g. via RPC).
2. Attach a SCSI target with with same target ID.
3. Hotremove event* from the previous SCSI target gets
finally executed. SCSI target with that ID is
occupied (again) and may be hotremoved by mistake.
The role of that hotremove event is just to kick the
vhost device and make it remove any scsi targets that
can be removed, so add a check preventing it from
removing devices in states other than REMOVING.
Change-Id: Ia1cc7cae797fd8859d485e63f0ef37aeac2945d0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449990
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Always unset the VHOST_SCSI_DEV_REMOVED status on
session stop, so that we won't send hotremove SCSI
sense codes after e.g. a VM gets rebooted. The VM
should generally enumerate the SCSI devices again
in such case. We already unset the REMOVED status
for devices which were still attached at the time
of the session stop, but the devices hotremoved
before the session stop retained their REMOVED
status, giving us inconsistent behavior.
Change-Id: I7c5876e29f4bdc99cc060f1d891e24ac57051f37
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Vhost sessions currently inherit the SCSI target
status from their vhost devices when started. So
if a session is started while an asynchronous SCSI
target hotplug is in progress, the newly started
session will inherit the VHOST_SCSI_DEV_ADDING
state, which was not meant to be used in sessions
and will likely cause vhost to misbehave. The
ADDING status is used by the entire vhost device
to indicate that some sessions are still hotplugging
the SCSI target and that target can't be hotremoved
just yet. The sessions set their targets' state to
PRESENT when hotplugging them, so newly started
sessions should do the same.
This patch also prevents the same SCSI target to be
hotplugged twice to a single session. It wouldn't
cause any problems, but some resources could've been
leaked.
Change-Id: Icdbff78c167fc1f2f65137087334bd5512e81546
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This an optimization that slightly simplifies the
SCSI target management. Currently if a session is
started while an asynchronous SCSI target hotremove
request is pending, the newly started session will
inherit the target in the REMOVING state. It will be
probably removed from that session in the next
management poller tick, but all that complication
is completely unnecessary. The session shouldn't
have picked up the removed SCSI target when started.
It could have simply checked that the target is
being removed and could have ignored it. That's what
this patch does.
Since the hotremove event used the active session
counter to determine if the removal was additionally
deferred, it had to be refactored to use a separate
per-request context, as there's no longer a direct
relation between started sessions and sessions that
still need to remove the target.
Change-Id: Ib78765290fa337a7d0614e5efc271760e81e4e63
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Here assert(nvme_bdev->id == nsid) ,there's inactive case about nvme_bdev,
that code will continue. So need to skip the same case in remove_cb.
Change-Id: Idd3bd16d32e75f6d0e448b838676eb6f2ca5cfad
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were incrementing over the end of the descriptor list and assigning
undefined values to the rsp opcode in SEND_WITH_INVAL case. We were only
hitting this error when mixing sgl and inline requests in the same
workload. We were just by chance hitting a four bit value that was set
to all 1s from the in capsule data from the last request.
Change-Id: Ied06356f3d22fa34a2cd869dfad6bdca8720791d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The upper levels of the stack allow for this, so we should follow that
pattern so I/O don't break here.
Change-Id: Ia862f14975a551b0675bafd7709fb7897d0d567e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The while loop in this function was structured such that if the final
child request did not contain a full number of SGE elements, it would be
truncated. We need to not only check whether we have a full number of
SGEs, but also if the current child has consumed the end of the parent
request.
Change-Id: I7df6c224e9ab66033c92d2cf1af10452f5cdfd9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While detaching the device, DPDK may try to unregister
a VFIO interrupt callback which is currently "in use".
The unregister call may fail, but the error doesn't get
propagated to upper DPDK layers. Practically, detaching
the device may stop in the middle but still return 0 to
SPDK.
This effectively breaks hotremove as the device would
be neither usable or removable.
We work around it in SPDK by internally scheduling the
DPDK device detach on the DPDK interrupt thread. This
prevents any other interrupt callback to be "in use"
while the device is detached.
Since device detach in SPDK can be asynchronous now,
we add a few checks to prevent re-attaching devices
that are still being detached.
Change-Id: Ibb56a8017e34418db0304fe32774811427b056aa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an attempt to fix device hotremove with VFIO.
A soft device hotremove request through sysfs [1] would
currently just block until the SPDK process manually
releases that device - e.g. upon an RPC request.
VFIO won't get unbound from the device untill userspace
releases all its resources. VFIO can signal a pending
hotremove request by kicking any file descriptor provided
by the userspace - and DPDK does provide such descriptor -
but SPDK does not listen on it.
DPDK does offer handy API to listen and in this patch
we make use of it inside our env/pci layer. Within
a DPDK callback we set an internal per-device hotremove
flag, which upper-layer SPDK drivers can poll with a new
env API - spdk_pci_device_is_removed().
The VFIO hotremove event will be sent to primary
processes only, so that's where we listen.
We make use of this new API in the NVMe hotplug poller,
which will process it just like any other supported
hotremove event.
Fixes#595Fixes#690
[1] # echo 1 > /sys/bus/pci/devices/<bdf>/remove
Change-Id: I03d88271c2089c740e232056d9340e5a640d442c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reservation notification log page can be returned via the
get log page command with correct page number, users can
get zeored page buffer if the controller didn't have any
reservation notification log.
Change-Id: I99f5e4b8917a6919eb68359628efa1bead4b21b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
All the reservation commands are processed on subsystem's thread,
however the reservation notice log are controller related, and
the get log page command with reservation page will be processed
on controller's thread, so we use the same thread for generating
the log.
Change-Id: Ie000320d74242b979f6638d703523f063347ec29
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Existing code only update the subsystem's poll group reservation
information when unregistering the key, however, new registrant
and update the key actions also need to be updated.
Change-Id: Ib8db9eb457977757251403edb92eda073b846e59
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now all the spdk_fs_cb_args used in blobfs are in the
spdk_fs_request context, so the field 'from_request' in
spdk_fs_cb_args can be removed.
Change-Id: I9b40cffeac8a673a87406ee89ad248939593806b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data structure spdk_fs_request has internal spdk_fs_cb_args
for each request, and for some APIs such as truncate they
all use spdk_fs_request as the parameter, so here we also
change flush to use the request parameter too.
Change-Id: Ic70b98cafe53d42c234f74b3703dc7797f210569
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After the write data has been appended to cache buffer, the
allocation of flush request can return error, so we move this
allocation before appending to the cache buffer.
Change-Id: Ia8baae8f3d88596561633bd8a5c4f83e554c72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rqpair qp and resources maybe not be created, if rqpair fail to
initialise. For example, in function new_qpair, the code run to
spdk_nvmf_qpair_disconnect, but rqpair is initialised in
poll_group_add.
Fix#557 segmentaion fault(core dump)
Change-Id: I1892e6d13e2d53dd5a7c4856d775f9b3b85da961
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
set_bdev_qos_limit RPCs must come after the RPCs that
create its bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7008745f9c56d9bc579decc7fe3c4d0d58950754
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451414
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This case was zeroing the entire structure - overwriting
the peripheral and page_code data already set. Don't
bother zeroing the alloc_len either - we'll set that
later in this case statement.
Fixes issue #750.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b7c6f954b5e3c85ddfaf801d64dd4a501f50cd2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The DMA-able vrings are allocated separately, so
the general virtqueue object can be allocated with
regular malloc - it only contains some local PMD
context.
While here, also allocate those DMA-able vrings using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I06b9e0256c14c21747c253f05b63ef2361f465c7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If rsp->status.sc != SUCCESS and xfer == DATA_CONTROLLER_TO_HOST,
We would not send the data WR, so clean the num_outstanding_data_wr.
Fix#728
Change-Id: I32259788e495ed76f8f02a9d871bd56356d93dc4
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450726
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A host can use the Asynchronous Event Command to be notified of
the presense of one or more avaiable reservation notification
log pages. A reservation notificaton log page should be created
whenever an unmasked reservation notification occurs.
Change-Id: I8b83e5319725286dd0a5efc1b22d8ac4673e31e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the flag destructed to struct spdk_iscsi_tgt_node and
iscsi_op_login_check_target() refers it and returns
ISCSI_LOGIN_TARGET_REMOVED if it is true.
When destructing iSCSI target node, it will be nice if iSCSI library
can stop further connections are created but, connections are not
associated with any target node until processing login. Hence stop
creating sessions instead.
Additionally, when destructing iSCSI target node, if the flag destructed
is already set, return immediately, and the flag destructed does not
affect discovery session.
Change-Id: Ic73bdd93f2ca7d5ca1d2f897d5046cbc51650d5f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450881
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These change will be used in the next patch.
Change-Id: Ifdb4ccf20049b46e850122a4021cbbe7441e1270
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will exit only connections belonging to the
specific target node. So add target to get_active_conns() as
an argument.
Change-Id: If0d9cad46614310e0fe17e69e75c1185146730f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When target is specified, the function starts exiting any
connection that belongs to the target. When target is not
specified, the function starts exiting all connections.
Change-Id: I0dfb56ceac5ee36d10547a9ab9a0f768ca8e02ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the operation to start exiting connections into a
function. This patch doesn't change any behavior.
Change-Id: I8f48961bcc95c480636e0e0d8fbb8ef029818d9e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
target had been set to the created session after returning from
create_iscsi_sess(). But create_iscsi_sess() has been used only in
a place and target has been already included in the arguments in
it. So set target to the created session in create_iscsi_sess().
Change-Id: Id65e6c5a1f76b995a7d0e9939ff3a2fce5daeb3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI mutex had guarded both unregister operation and destruct
operation in a single critical region in spdk_iscsi_shutdown_tgt_nodes
and spdk_iscsi_shutdown_tgt_node_by_name.
Subsequent patches will separate unregister operation and
destruct operation, and so this patch separates critical region of
unregister operation and destruct operation.
Change-Id: I847915f8277c4475c034ca64fd07ccdd47659590
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will make iSCSI target possible to wait for
completion of SCSI device destruction by using callback.
This patch moves spdk_scsi_dev_destruct() before starting to
free iSCSI target node resource as a preparation.
Change-Id: I9cfe7662a05b1211292a5cc448bbba60a929f356
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nvmecli tool doesn't add parameter check when submitting
to NVMf target, so we add additional check in NVMf target
to prevent such cases.
Change-Id: Ieb2b3b3c22d71913f2743a0f9cdad4aba184c320
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Existing condition for updating subsystem poll group's reservation
information is wrong, when received the RELEASE command, the
reservation type may be changed to none, but it will not be
saved to the subsystem's poll group.
Change-Id: Idc177a0f03fb9611d6eda1e25a5b90caaa73d1be
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450727
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This avoids a data dependent load to find which
callback to call in the completion path.
Change-Id: Ifa20790a7af3332a74bc45037e589668744af797
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The same information can be obtained by checking the req
field for NULL.
Change-Id: I9689ee0be33537fd6d3f35d8c3710fabab5e1928
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Newly added callback parameters are passed to spdk_bdev_unregister()
in the end. This patch adds just parameters and the next patch will
utilize them.
Change-Id: Ic239c55872c0c69f3d1625eaccdb91a32a9d4d30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Change-Id: Ib58b7e6d8531c84ab5e4fce7a838e409e77a0de5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450571
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
spdk_io_device_unregister should be called after spdk_bdev_unregister
because IO channel should be terminated after all open descriptors
are closed. This patch follows the practices of other bdev modules.
Change-Id: I6003edf0a6f6b2b235bf66f4b81bb0c2b855ae14
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450570
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Move the call raid_bdev_deconfigure() to the end of the function.
This will make us to add the callback to raid_bdev_deconfigure()
and remove_base_devices().
Change-Id: Ic8ce847068f5a3682003707c87c364ed4b68e587
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450569
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Getting raid bdev from its config and processing base bdevs by using
it throughout is much more natural.
Checking if base bdev is active can be done by checking if the pointer
to the base bdev in base_bdev_info is not NULL.
Change-Id: Idd43b13eb342d9cd21ba55943bdcd1f564b3760e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450568
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
This patch doesn't change any behavior. This patch just factors out
code into a function and move it to raid_bdev.c.
Change-Id: Ia86741ec686ffd85e4d826caf4442292963922ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch tries to clarify the logic of the operation to
deconfigure the corresponding raid bdev when a base bdev
is removed.
Change-Id: Id601049dfa59cd919321d833c2867f40c3ba031b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
raid_bdev_free_base_bdev_resource() has been referenced only in
bdev_raid.c.
Change-Id: I4be9ed5b7a93b950b16e57323cdf1f4bdf89841f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450565
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
raid_bdev_cleanup() has been used only in raid_bdev.c.
Change-Id: I4dcc4979eda2fd872fda23e3433b120ab6aaaad2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Configuration lists in RAID bdev are unlikely to be exposed outside
of the RAID bdev module. Hence simply the prefix g_ will be enough
to clarify they are global data structure in RAID bdev module.
Change-Id: I9df88db8fa651d5af7d771d88ff04bb5997079c9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When copying the NVMe command from the request to the actual
submission queue slot, use a non-temporal move instruction.
The submission queue slots are never read by software - only
written to. So don't pollute the CPU cache with their contents.
Change-Id: I112f721abfac03bd7b33ec9ddf783d4bf2952b42
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to ceil the size of the vring structure to the
nearest cache line boundary. That's how the original
DPDK implementation behaved, but I can't find a reason
for this. This patch gets rid of the ceiling.
Change-Id: Iaa40fdb79c60252237901f77023ff2f9e580eece
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_malloc() is not required here, as the device
struct is neither DMA-able nor shared between processes.
While here, also allocate various ioat buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I4ffa40a59f48b2854ba3b35a759e4778007b47b7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I1ad624aa64c70e6f5716d711bb6d2d6b6cd1007d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450257
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Idb18f7ef44634deaf63139f0f872881c9cdaefac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate mdisk->malloc_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: If835216764a565ade09180159fbbc92411b5c78f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Id49d700116bdd977893c6b89470764d97d9293bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a part of future changes to block blob operations
that may cause race conditions between each other.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia728d1fc207375ddcb3b70b5081ddcffa9f99027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are several places where we have the tracker
pointer, yet we go find the tracker again by getting
the tr->cid and using that index to find the tracker
again in the qpair's array. That's really silly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54acd642a2c9821f2b95e17563904b859495081a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current the idea is:
Convert the multiple SGL into the single SGL and send it
out.
Change-Id: I8e571704e9d7c7b583f889837eead7cac1982fcd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First submission. Implemented part of the Opal library
and "scan" function. Can be invoked by nvme_manage.
Change-Id: Iba86d86dd3af06a06b6805120ee5005af8183459
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Limit the thread scheduler to put spdk_threads on
lcores < last_lcore instead of lcores < lcore_count,
which was probably the original intent.
When the cpumask was not a contiguous cpu range, the
thread scheduler failed to schedule any spdk_threads on
the last cores. There was one hardcoded thread created
for each reactor, but the scheduler could squash some
of those into a single reactor. This broke the legacy
lcore-based messages as those expect there to be at least
one spdk_thread per lcore. Any spdk_poller_register()
or spdk_get_io_channel() called from such a legacy
message would fail an assertion, as spdk_get_thread()
returned NULL.
Fixes#743
Change-Id: I81a3f76d9c4788596c697df6ff51b264b99ce10b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's possible that we get a request to abort I/O just after
a queued_datain_task has completed, but before we've had a
chance to remove it from the queued_datain_tasks TAILQ.
_iscsi_conn_abort_queued_datain_task wasn't accounting for
that which would result in an infinite loop.
Fixes issue #725.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Tested-by: Jane Lusby
Change-Id: I494ee78763d527d83dcb65f46563ee69bb975576
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450301
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregister OCF bdev using poller that checks if
cache has pending requests.
This prevents ocf_mngt_cache_stop causing
deadlock on reads in WT mode.
Submodule commit was updated to get new function ocf_cache_has_pending_requests().
Change-Id: Iee4cb09bc2bb859a6dcce89994c686f64924c942
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add structure vbdev_ocf_mngt_ctx that is going to be used
for asynchronous management operations.
Using such context, dynamic memory allocations are no longer required
(except for one time poller registration)
This patch also adds functions to modify context in a predictable way.
They are very important for complex flow of management operations in OCF bdev
especially after whole OCF API gets changed to asynchronous.
Change-Id: Ia402d51665330a553f7f3d74000e3636f0d6a598
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Should speed up operations, and allows us to remove the 16 byte link
object from the request structure.
Change-Id: Ie62df1f44d22580a7a7ae41c498295841d1e3064
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I683ea366da7bb186f16a8084a9c43276ed4fce04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To support the multiple SGL later.
Change-Id: I133a451100b736353cf98a6aaca879d290ff5b67
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enhance RPC method start_nbd_disk to take nbd_device as
one optional parameter. If it is not assigned, automaticly
choose an available nbd device path from /dev/nbd0 to
/dev/nbdN.
For github issue #324:
https://github.com/spdk/spdk/issues/324
Change-Id: I72c064d8bd476df342f5aa0af4d6120eb021c7ed
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function will be exteneded later for multiple SGL
support.
Change-Id: I1f6962ec03c72e335efaa311a12d3891312fcc53
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
LUN ID is not converted from integer to structure and integer is
set to R2T PDUs.
Popular iSCSI initiators don't check this value and work correctly.
This patch uses the public helper function of the SCSI library
to fix the issue.
Additionally, private helper function to convert structure to
integer for LUN ID is replaced to the public helper function
of the SCSI library.
Change-Id: I9218c5ef7a8bfec43326c6584db7c6929fdd11a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one enum from this whole struct, so there is no need
to store it. Plus the queries we use to update it are so infrequent and
only occur during connect and disconnect so I think we can save quite a
bit of space by removing this without compromising performance.
Change-Id: Icf29977a3c10cb289564fa2760a0059f07a0f8cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There was a lot of duplicated code here between states. I'm trying to
minimize the duplicated code without making it confusing.
Change-Id: I13183431e554c8a9f501b3385bbd7b59e2c83161
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Catch an edge case where a multi sgl request is longer than the allowed
transfer size.
Change-Id: I79779050fe951d16f1240e2c3d8cf5037e576ea2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is important to avoid thrash when we don't have enough buffers to
satisfy a request.
Change-Id: Id35fd492078b8e628c2118317f674f07e95d4dba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While useful in NVMf target, this is really annoying
in the consolidated spdk target, where NVMe-oF doesn't
even have to be used. OCF tests currently use iscsi_tgt
just because spdk_tgt requires the additional [Transport]
section in the cfg file. Let's remove that requirement.
Change-Id: I418b47d62dcc06b9513f9f0496dc1e39b9d5a554
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450056
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Right now they can only use memory from the socket
that performed iSCSI static initialization, which
doesn't make sense. Those mempools can be used from
a different socket as well, so don't restrict them
to any specific one.
Change-Id: I0def1c554ed6227ab0f0a7be107c4c1c61f40c96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Relaunch queue poller on put_io_channel callback of OCF bdev
to delay thread shutdown. New poller will finish all pending
OCF requests as there might be some even after all SPDK IOs
completed.
This solves the issue of OCF not being able to
complete all its work because of queue poller getting
unregistered in callback of put_io_channel.
This patch also changes unregister procedure:
we call ocf_cache_stop in callback of io_device_unregister
instead of in callback of bdev_unregister.
Change-Id: Ib7e41fc25e71029a73bb76a62e39e6bf4b8189ce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vbdev_ocf_delete function accepts callback now.
RPC delete_ocf_bdev is also updated to adopt this change.
Change-Id: I1d357a5e37015268e28c07fd81dc35f48ec80ab8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are really specific to the request and not the wr or data
object. In the case of multiple wr requests, the maximum number of
buffers per req is equal to the number of SGEs in the NVMe-oF request
*2.
Change-Id: Ic59498bfed461d180adb2fb9a481ac5b11fa9252
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also means that the RocksDB threads don't need
to be SPDK threads any more.
Change-Id: Icadd6dd446958ebf470ad8ab8239f5390942eb87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next step, this won't be a channel at all.
Change-Id: Ia8fe4da5b0b283e8dfc5c6477b84cfdd346d89a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we decompress, pass the size of the compressed
data - not the size of the buffer itself.
We also need to remove an assert that's no longer
true since we can now handle compressed chunks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb7896db12ccbefdd49815b5037af11ddd82e625
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most typically, the error will be -ENOSPC, meaning the
destination buffer wasn't big enough to hold the compressed
data. But even for other types of errors, just write the
uncompressed data rather than treating it as an I/O
failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6526cab95488a1a587b183237f9980c83287761
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
My iSCSI target reported segment fault after memory allocation
failure, and add the addtional check here can fix the issue.
Change-Id: Iee3e497d7028fbface6d110c78e73965ef0f178b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449717
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lvol should not only be freed but also removed
from lvols list when deletion fails.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a047e1cc611e71b1544ca77c256a879dd2efdae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not standard to put a newline here - let's use a null
character instead.
Found while using nvme-cli - when creating a subsystem with
default serial number, the right justified callout text had
an extra newline in it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a81dafb4f6c30f7bf2dcebfa7a5b19cfe3ab5fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes#726.
This prevents a segmentation fault by checking the pointer
before accessing it.
Change-Id: I18a3776fbcd6242c6efd1b88044debaa88c7342f
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449591
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ib9fb94463a69ffd9660ab2c7fbe02826a7e06741
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few private functions had still the prefix spdk_ in their names.
This patch completes the effort to remove the prefix spdk_ from
private functions in iSCSI library.
Change-Id: Ic1a1e85220edb72296ca4881bdf7b550c4f6b6b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#722. The state was set in nvme_ctrlr_identify_id_desc_async
Signed-off-by: cranechu <cranechu@gmail.com>
Change-Id: I232f0035e8c45d49eca2de7174c91860a299d804
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449527
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaced tpoint_ids generated based on the properties of the IO with a
static list of tpoint_ids, to fit inside the per-group maximum tpoint
limit (64).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb8b8637a1e6d8f0e7fd3f4363b97fdbedcdb8d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When you connect a iscsi lun as a bdev, and the lun id is not 0,
all IOs will fail.
We should use the correct lun id in libiscsi.
Reproduces like this:
./scripts/rpc.py construct_iscsi_bdev -b iSCSI0 -i
iqn.2016-06.io.spdk:init --url
iscsi://127.0.0.1:3261/iqn.2016-02.com.smartx:system:fl-iscsi/1
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I2480e866fdda17426362aca3cb30b7e90c927547
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449318
Reviewed-by: Kyle Zhang <kyle@smartx.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These function declarations are not used.
Change-Id: If525f4157e3fa9e5d718e6c7aa77db8584edd14c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449395
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our blobfs allocates fixed number of reqs on three different channels
(the default size is 512), if the req cannot be allocated, our blobfs
related function will do nothing.
With this debug info added, we can easily know the issues.
If the fixed number of requests are not enough, we need to change the
design, using malloc/free together with the fixed number of requests.
During high presure test, I think that if the reqs are not allocated,
it will cause the sync, flush related issues.
Change-Id: Ied8cd5197c4f87b861bd7dc09edd5a095fdcc802
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just a cleanup. There's no need to hotplug
or hotremove SCSI targets from stopped sessions, because
those sessions can't access any targets anyway. When
session is started, it already inherits all SCSI targets
from the vhost device. When it's stopped, it releases
resources of all targets. Intermediate changes have
no effect whatsoever, so don't do them.
Change-Id: Ibf283bcf8260e71dec8d9ea39a9461a978031ab3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is theoretically possible for an asynchronous
hotremove request to be finished before the hotplug
request that was started first. This is obviously
not expected and will most likely result in a resource
leak.
For SCSI target hotplug, we immediately update the
whole vhost device object and then asynchronously
ask each vhost session to poll the changes.
For hotremove, we see the device attached in the
whole vhost device object, so we immediately mark
it as "still being removed" and proceed aynchronously
asking the sessions to hotremove. When session
receives the hotremove event first, it will either
fail an assertion (when debug is on), or do nothing.
The subsequent hotplug event will attach the target
again - and that target won't be ever freed.
Change-Id: I784c979fb47127a4238038ad9fb5ed1cac3ced04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For session context we need only a few fields from
spdk_scsi_dev_vhost_state structure, so introduce
its stripped variant as a separate structure.
Change-Id: I1be4e77447443d156f86033450892cb7cb464cb9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In cases where initiator closes the connection as soon
as it receives a hotremove event, there is a possibility
of SPDK vhost stopping the session before finishing up
the asynchronous target hotremoval. The target would be
either hotremoved once the session is started again
(and it registers its management poller again) or it
could cause a potential memory leak if that session is
destroyed. Even though the SCSI target itself is always
freed, the hotremoval completion callback is only called
from the management poller. At least in our RPC case,
not calling that callback results in leaking the context
structure and some json data.
We fix the above by calling all hotremove callbacks just
before stopping the device.
Change-Id: Ibfd773e1ab82b63643c57d7a9d37304e3007e38b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing i to iovcnt in all references to the req->iov structure will be
important when we start processing multi-sgl requests.
Change-Id: I90a9b6d872b94f846ae7d29a45dd2703eafa6175
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by the multi-sgl version of this function as well.
Change-Id: Iafeba4836a77482fa2a158f86f1c17fe7fdeb510
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Defer the initialization when cache bdev mentioned in the config doesn't
exist when the FTL bdev is being created.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084502ae38c9ae5e385e5566550ec3cb8b6f9d2e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just a placeholder. The real implementation comes later.
Change-Id: I657b240977ba09fd6f24e9e36e97e293e73b5801
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was partially present but not complete. Fits here in the series as
it requires read/write operations.
Change-Id: I552896c934bf60256625a83951a95d58d2719646
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447358
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
