When an I/O gets an I/O error, the I/O path to which the I/O was
submitted may be still available. In this case, the I/O should be
retried to the same I/O path. However, a new I/O path was always
selected for an I/O retry.
For the active/passive policy, the same I/O path was selected naturally.
However, for the active/active policy, it was very likely that a
different I/O path was selected.
To use the same I/O path for an I/O retry, add a helper function
bdev_nvme_retry_io() into bdev_nvme_retry_ios() and replace
bdev_nvme_submit_request() by bdev_nvme_retry_io(). bdev_nvme_retry_io()
checks if nbdev_io->io_path is not NULL and is available. Then, call
_bdev_nvme_submit_request() if true, or call bdev_nvme_submit_request()
otherwise. For I/O path error, clear nbdev_io->io_path for
clarification. Add unit test to verify this change.
Linux kernel native NVMe multipath already takes this approach. Hence,
this change will be reasonable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7022aafd8b1cdd5830c4f743d64b080aa970cf8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change I/O retry to use the same io_path if
it is still available. However, bdev_nvme_submit_request() always calls
bdev_nvme_find_io_path() first. For I/O retry, if possible, we want to
skip calling bdev_nvme_find_io_path() and use nbdev_io->io_path instead.
To reuse the code as much as possible and not to touch the fast code
path, factor out request submit functions from
bdev_nvme_submit_request() into _bdev_nvme_submit_request().
While developing this patch, a bug/mismatch was found such that
bdev_io->internal.ch was different from ch of
bdev_nvme_submit_request(). Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id003e033ecde218d1902bca5706c772edef5d5e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From Qemu 7.2 slirp submodule has been removed from the Qemu source tree
which affects "-net user" in vhost-vs-qemu tests
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I2ab69dc8eccafe3649bf1c67f8dd310585c50eaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
- Move "run_test" entries around so that target
and hosts tests are grouped
- Add missing timing start & exit directives for
target tests
- Further move tests around to group them by
matching SPDK_TEST_* flags
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If1decd49ffbf2d1fffac60e55b506002a2107d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16210
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF initiator in recent kernel versions takes
considerably less time than when the "sleep 4" was
introduced, as described in:
https://github.com/spdk/spdk/issues/2467
This effectively reverts:
dacd8ec827
Change-Id: Ib678d99c330c739788a5d6aaeabd23cb2c9017ef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new module replaces functionality in vbdev_crypto.
This module is bdev agnostic, so some inernal parts
were reworked.
io_channel: contains a qp of every configured DPDK PMD
crypto key: for mlx5_pci we register a key on each available
device since keys are bound to Protection Domain.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1845cb87eadacbb921c593ba82207a97f2209a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This patch is just a copy of vbdev_crypto.c and the
corresponding UT file. It makes it easier to review
the next patch which adds accel operations
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ib88b45d573b011b1acb35da9bf4dab922d8fb183
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16182
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
* generic metadata support for raid modules
* raid is not created when metadata formats for base bdevs differ
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ifaf9cfc4f2472c3820da1070deda758c5334edb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Skip CentOS8 and Rocky8 as packages are
not available in default system repositories.
Change-Id: I4e957444aec1745872f5d6cc1cd9bdec792ac400
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Error counters for NVMe error was added in the generic bdev layer but
we want to know more detailed information for some use cases.
Add NVMe error counters per type and per code as module specific
statistics.
For status codes, the first idea was to have different named member
for each status code value. However, it was bad and too hard to test,
review, and maintain.
Instead, we have just two dimensional uint32_t arrays, and increment
one of these uint32_t values based on the status code type and status
code. Then, when dump the JSON, we use spdk_nvme_cpl_get_status_string()
and spdk_nvme_cpl_get_status_type_string().
This idea has one potential downside. This idea consumes 4 (types) *
256 (codes) * 4 (counter) = 4KB per NVMe bdev. We can make this smarter
if memory allocation is a problem. Hence we add an option
nvme_error_stat to enable this feature only if the user requests.
Additionally, the string returned by spdk_nvme_cpl_get_status_string()
or spdk_nvme_cpl_get_status_type_string() has uppercases, spaces, and
hyphens. These should not be included in JSON strings. Hence, convert
these via spdk_strcpy_replace().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07b07621e777bdf6556b95054abbbb65e5f9ea3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15370
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
spdk_nvme_cpl_get_status_string() returns a string which contains upper
cases, spaces, and hyphens. To use the returned string for JSON RPC, we
have to convert it to a string which contains only lowercases and
underscores.
For our convenience, add a new API spdk_strcpy_replace() to replace
all occurrences of the search string with the replacement string.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3ca9774d0bfb2d0bb7bd7412bc671e6f69104b7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fedora37 has iproute version 5.18.0 in the
repository which does not include "tc" in it.
This tool in newer versions of iproute is in a
separate package "iproute-tc" and is not installed
by default.
"tc" is used in ADQ tests for e.g. creating traffic
classes or filters.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I9456d80de1b23a66c508f466dfb93f9b86d4c9e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16126
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- The test "sma_vfiouser_qemu" by SMA requires
"--with-vfio-user" to be enabled
Signed-off-by: Xin Yang <xin.yang@arm.com>
Change-Id: I866cb99ae5519c12a4be44c5fcfee8fd8b4442a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Yibo Cai <yibo.cai@arm.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU binary is configured in the CI configuration file, so
we don't need to set it in the script now.
Change-Id: I6d0f4092f7a15bda5718f60c9a3b42f7127a9807
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added num_outstanding_reqs in struct spdk_nvme_qpair to record outstanding
req number in each qpair. This can be used by multipath to select I/O
path.
Increment num_outstaning_reqs when req is removed from free_req queue and
decrement it when req is put back in free_req queue.
Change-Id: I31148fc7d0a9a85bec4c56d1f6e3047b021c2f48
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_crypto uses memset() to zero secrets passed
by the user (cleanup/error path) which is not safe -
compiler may detect that the buffer being zeroed
is not accessed any more and may "optimize" (drop)
zerofying.
C11 standard introduces memset_s which guarantess to
change the buffer content, but this function is optional,
gcc may not support it. As alternative, add not optimal
from performance point of view default implementation.
Add unit test to math_ut.c to avoid creating new .c file
for 1 simple test
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I11c7d15610df02e4a3761a88c85f6f8c54fb4b0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Attribute base_bdevs_max_degraded of raid_bdev_module struct is
replaced with more generic structure allowing implementation of
raid levels for which constraint is by number of operational
drives instead of maximum number of failed drives.
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ie7079993d27d32118b865c3aabd92252a2807b94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Use improved bdev_raid_get_bdevs RPC to verify more raid bdev
properties.
Change-Id: Ic2ca95324816642bbcc04237c6d481f2f4b7773c
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will be used for allocating buffers from accel domain and
allocating bounce buffers to push/pull the data from memory domains for
modules that don't support memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbe4d2129d0aff87d9e517214e9f81e8470c5088
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This domain is meant to represent data being transformed by accel
engine. Users will be able to allocate buffers from that memory domain
and use them when appending operations to an accel sequence.
Since these buffers are only meant to be used as placeholders for actual
buffers, none of the push/pull/translate callbacks are implemented. To
access the data after it was transformed by accel, users should make
sure that the final command's destination buffer isn't allocated from
accel memory domain.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia031c7b205e98792d0a93f01513101b86afa9faa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reversing a sequence means that the order of its operations is reversed,
i.e. the first operation becomes last and vice versa. It's especially
useful in read paths, as it makes it possible to build the sequence
during submission, then, once the data is read from storage, reverse the
sequence and execute it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I93d617c1e6d251f8c59b94c50dc4300e51908096
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Operation sequence should always be treated as a whole, meaning that
users cannot rely on the contents of any intermediate buffers and should
only care about the buffer that's the destination of the whole
operation. This allows us to remove some of those copy operations by
changing source / destination buffer of a preceding / following
operation.
If a sequence is using buffers from non-local memory domain, users can
append a copy operation to a sequence to specify a local destination
buffer. If the module executing the operations is aware of memory
domains, this can avoid doing an extra spdk_memory_domain_pull_data().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I93b94d46ee32700819e9e6f1c55350692db8a67a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch introduces the concept of chaining multiple accel operations
and executing them all at once in a single step. This means that it
will be possible to schedule accel operations at different layers of the
stack (e.g. copy in NVMe-oF transport, crypto in bdev_crypto), but
execute them all in a single place. Thanks to this, we can take
advantage of hardware accelerators that supports executing multiple
operations as a single operation (e.g. copy + crypto).
This operation group is called spdk_accel_sequence and operations can be
appended to that object via one of the spdk_accel_append_* functions.
New operations are always added at the end of a sequence. Users can
specify a callback to be notified when a particular operation in a
sequence is completed, but they don't receive the status of whether it
was successful or not. This is by design, as they shouldn't care about
the status of an individual operation and should rely on other means to
receive the status of the whole sequence. It's also important to note
that any intermediate steps within a sequence may not produce observable
results. For instance, appending a copy from A to B and then a copy
from B to C, it's indeterminate whether A's data will be in B after a
sequence is executed. It is only guaranteed that A's data will be in C.
A sequence can also be reversed using spdk_accel_sequence_reverse(),
meaning that the first operation becomes last and vice versa. It's
especially useful in read paths, as it makes it possible to build the
sequence during submission, then, once the data is read from storage,
reverse the sequence and execute it.
Finally, there are two ways to terminate a sequence: aborting or
executing. It can be aborted via spdk_accel_sequence_abort() which will
execute individual operations' callbacks and free any allocated
resources. To execute it, one must use spdk_accel_sequence_finish().
For now, each operation is executed one by one and is submitted to the
appropriate accel module. Executing multiple operations as a single one
will be added in the future.
Also, currently, only fill and copy operations can be appended to a
sequence. Support for more operations will be added in subsequent
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id35d093e14feb59b996f780ef77e000e10bfcd20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
According to the current SPDK tests results, bpftrace under
the F37 is struggling with segmentation fault issues with
the newest versions (0.15.0/0.16.0).
See: https://github.com/iovisor/bpftrace/issues/2420
Fixes are in master branch. Waiting for the next
bpftrace release.
Linked to: https://github.com/spdk/spdk/issues/2833
Also, the bcc has been removed as we can use build-libs.sh
script that prepares necessary libraries built in the
bpftrace tree. Bpftrace has bcc as submodule that points
to version later than 6dac27d9, which we needed to use
previously.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I3de292cc0050dc32592076280c5e72be5e879cbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16024
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a simple case for RPC accel_assign_opc and
RPC accel_get_opc_assignments.
Change-Id: I14e00bef4fd6df85808b024a6398c037ec80bd9a
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15678
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This code has a similar potential problem as the identify
and log page commands did: stop using req->data in favour of IOVs.
We also need to fix the unit tests to initialize the iovs.
We don't change the existing "set" behaviour of requiring a single IOV
here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I257567a7abd5fc3ed9ee21b432c7da7d70fbbde0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16122
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a define for the Identify command buffer instead of using a raw
value.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9073ff84e2fa2ef9268051b898fe1027d8e97baa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In preparation for supporting additional claim types, create a claim
type that represents the current claim type. Everything that sticks to
the public APIs should continue to work as before.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0d02e4b3f4bbf4eb5a7391028aa31e999f9da915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In preparation for an updated claims API, refactor
bdev->internal.claim_module into a union that will eventually hold
different information based on the the type of claim.
Change-Id: I7ade6f03128bdb0f8375a95ae953cb63d6aa686d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This updates the way that the bdev_ut examine callbacks are called such
that tests can specify test-specific examine_config and examine_disk
callbacks. A test is added that uses this to verify that no locks are
held while examine callbacks are called.
Change-Id: Ic1a402a0edc17aeb9cd596e1f6822af9f59c7d5b
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
This introduces a deprecation for calling spdk_bdev_register() and
spdk_bdev_examine() on a thread other than the app thread. The
deprecation period starts in SPDK 23.01 and removal is expected in SPDK
23.05.
The intent of this deprecation is to ensure that bdev modules'
examine_config() and examine_disk() callbacks are only ever called on
the app thread. This largely a formalization of what has long happened
due to the RPC poller running on the first thread started by
spdk_app_start().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic9d7b87b6522be20357d2eab2d0c77cd5753452f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
We currently use a hack AllowDuplicatedIsid with the
iSCSI target to allow running multiple Calsoft tests
in parallel, since each Calsoft test always uses the
same InitiatorName.
But this causes some tests to intermittently fail,
likely due to changed behavior with many sessions
sharing the same InitiatorName. The problem is
very difficult to reproduce, and made worse since
the Calsoft tests themselves are binary only.
So instead split the tests into two sets - one set
contains nopin-related tests which each take longer
to run due to various interval expirations needed for
the test. There are just a few of these tests, and
do not appear to ever cause an intermittent failure,
so we run these in parallel. The rest are all run
serially and run rather quickly.
Fixes issue #2416.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0bd29da8a71d4c7593bba11f1e2f2e11e2289d8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16022
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test scripts need to call iscsitestinit to enable
--iso mode - so call it from calsoft.sh like we
do for other test scripts.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdf1789f76d75ff3dfd317c333524337d34c579c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15971
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU is fully capable of unlinking its own pidfile so it may happen
that after sending a signal to terminate it, the file is already gone
when we attempt to rm it - in such a case, rm fails leading to overall
test failure. Avoid that by allowing QEMU to do its job.
For cases where QEMU might have potentially failed (e.g. due to a crash)
we leave the rm in with an extra -f on its cmdline.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia8d5c73dd76225583a63c1f622835e22ce32e66c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When merging data from one spdk_histogram_data to
another, the merging is only valid if the bucket_shift
for each structure is the same. Otherwise we are
combining data points that cover different ranges
of values.
So check that the bucket_shifts are the same before
merging. Change the return type to int to
return -EINVAL if structures with different
bucket_shifts are attempted to be merged.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If98e2d03384d85f478965956da2a42cfcff4713d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Many parts of the blobstore.c seem to have gone with the assumption that
blob creation, deletion, etc. all happen on the md thread. This
assumption would allow modification of the bs->used_md_pages and
bs->used_clusters bit arrays without holding a lock. Placing
"assert(spdk_get_thread() == bs->md_thread)" in bs_claim_md_page() and
bs_claim_cluster() show that each of these functions are called on other
threads due writes to thin provisioned volumes.
This problem was first seen in the wild with this failed assertion:
bs_claim_md_page: Assertion
`spdk_bit_array_get(bs->used_md_pages, page) == false' failed.
This commit adds "assert(spdk_spin_held(&bs->used_lock))" in those
places where bs->used_md_pages and bs->used_lock are modified, then
holds bs->used_lock in the places needed to satisfy these assertions.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0523dd343ec490d994352932b2a73379a80e36f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
In DPDK 22.11 rte_cryptodev_sym_session_create() now takes
a single mempool with element size big enough to hold session
data and session private data.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6c9db063825843a903d1ff84dd8d77f198a841a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
