Users can use '-N' option to disable shutdown notification
for faster shutdown process.
Change-Id: I227dc4da3aa2f89d23f9b235e979cb6d3e25d635
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Original intention most likely was to compare nvme lib to
aio, but since then aio bdev was developed.
There should be no need to keep the support for AIO in
perf example app.
Change-Id: I716f2164b8eaef16db05b4fffa35393c7d916e0b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
New flag -V was added for VMD enabling.
Change-Id: Ie0feae1bdfce39ad246f57411d00587c6417d21d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
verify_io is a function pointer, so avoiding the
call altogether is beneficial. We know that no
verification is possible if md_size == 0, so use
this to determine if the call should be made.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I75f01e4f56aacb0f7babd2342efc6014f886667d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456249
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The compiler wasn't always inlining this. Inlining
results in a small optimization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34240d85439b7329fab7151ae4f8b02f44c4d7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456248
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that we print the addr/nqn for fabrics controllers,
adjust the column width in the output so that it prints
the full information for fabrics, but keeping a smaller
width when it is only PCIE controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3532a8928a806b8084047f6686c37cd02d015983
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The serial number doesn't provide much value - but the
transport id can sometimes be helpful though to correlate
performance of different devices to their PCI BDF.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I529f111311108a6efc1ba23129963bb4383d3bdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are the names displayed in the output. Some
upcoming patches will modify these names, so making
this a common function now will reduce the work
later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I11cb8f607a66523becdcf621d8d6c911aec4427d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The perf tool's bandwidth data is MiB/s, not MB/s.
So update the data description part.
Change-Id: I770cc0d7c0f0a4d56cb4eff593e88fbed55e3ed6
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451319
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For some testing, we need queue pairs to exist but not actually
be in use.
Change-Id: I2b17ff0172c9ec002692babcf7d4d612c3062eb4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/392977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Queues will be doled out to cores as available.
Change-Id: Ib6a0fe846a9d90b659754be1c11ae022abbe38a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/391876
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This tool continually polls for completions, so it
is safe to turn this on.
Change-Id: Ice1c68cdaff070f8edd428621e19a6fb44fb8c31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
If do not do that, we will continue polling. And checked
the exceptional handling of aio_check_io, it will just exit.
So we add such case, thus we shall not poll the qpair again.
This is especially useful when we use perf to test against
NVMe-oF target.
Change-Id: Ib820e0b80f80cfceb1ea5e08b359f50d9e360b30
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/444325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If spdk_nvme_probe fails, there will be no controller,
and we jump to clean up. And the thread is not created,
so we need to judge the value of thread. if it is not zero,
we will do the pthread_cancel. Otherwise, we do not
need to call that. If we call that, it will have coredump.
btw: we also fix an small issue of cleanup.
Change-Id: Iee854f6ef42ef6d4a3d3f63d57740375e293a3ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
perf application can't generate IO for NVMe namespace with
more than 4G size.
Example of error:
"Attached to NVMe over Fabrics controller at 1.1.75.1:1023:
nqn.2016-06.io.spdk.r-dcs75:rd0
WARNING: controller SPDK bdev Controller (SPDK000DEADBEAF00 ) ns 1 has
invalid ns size 0 / block size 4096 for I/O size 4096
WARNING: Some requested NVMe devices were skipped
No valid NVMe controllers or AIO devices found"
ns_size variable is uint32_t, spdk_nvme_ns_get_size function
returns uint64_t. Result can exceed the maximum size of
uint32_t and ns_size remains 0.
The issue introduced by commit: f2462909
Change-Id: Idc6dd8688d5d6268bda1a1d6b06a611643af6155
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/443996
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep alive was enabled with RDMA/TCP transport by default, for
perf tool we should also enable it or the nvmf target may
disconnect when timer expires.
Fix issue #609.
Change-Id: Ibd4073c4a4ac398d601285d3bf64631058046c59
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441834
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds DIF generation and verification for NVMe namespace
formatted with DIX.
Change-Id: Ic67c88c485aacffa40fd0c73ba164f2cb1f88991
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the commands sent from upper layer, the NVMe driver may
split one command into several children requests based on
stripe and data length, so number of requests in each queue
pair has a value which is start from 512. we must ensure
that the number of request in each queue pair is big enough
to process all the commands, e.g: a user's input for a 512KiB
read can be divided into 5 children NVMe commands when maximum
transfer length is 128KiB, in addition, one parent request is
occupied to track children commands.
Fix issues #566 and #573.
Change-Id: I162da8e1e15692625ce311e68a72c89b6492dd56
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Apply the new DIF library to IO submission and verification.
Condition to use DIF generation and verification are not changed
in this patch.
appmask, apptag, and lba in struct perf_task are duplicated with
members of struct spdk_dif_ctx and are removed in this patch.
Change-Id: I68ccfb41cce2546d7145417c1490f49f0e62bb7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/437907
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Currently, DIF information is extracted by NVMe name space API each
time. This patch changes to extract and hold DIF information at
namespace registration and use it.
Change-Id: I6ce857bf5df5fd5972bdca8b52226d1fb81e40c7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unused apptag_mask and apptag in struct ns_entry.
Change-Id: I2da7ee099c8b18c93a9525e7195c1f98bc5a9543
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch replaces buf by iovec of struct perf_task.
SGL is not used in AIO and NVMe IO yet but SGL is necessary to
handle DIF and DIX by using the new DIF library.
Using SGL in AIO and NVMe IO will be done later.
Change-Id: Ied8f2aa0cb9cd933986e8046df7d48666bcc2f89
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce a function pointer table to ns_entry to remove if-else
sequence in every operation depending on the type, AIO or NVMe.
This will simplify upcoming DIF and DIX support in the Perf tool.
Change-Id: Ibbd9a9ac3a0b5df529d5b60706ce750a746114c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Subsequent patches will introduce function pointer table for
IO type depenedent operations.
This patch doesn't cause any functional change and just tries to
make them easier.
Change-Id: Ib612be43b9cf4bbb620739b29913cd05151bc872
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439805
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Subsequent patches will introduce function pointer table for
IO type depenedent operations.
This patch doesn't cause any functional change and just tries to
make them easier.
Change-Id: I664c9e39d101957c55cfcf9426f82feca348c328
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Perf tool had checked status of each NVMe IO command submission but
had not checked completion status of each NVMe IO command processing.
This patch checks the completion status of each NVMe IO command
processing and prints error if found.
No error handling is not implemented yet but this addtion will be
of any help for subsequent DIF patches.
Change-Id: I8da52d97584d7688cff04092efee658556cf7d86
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439966
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Subsequent patches will support DIF and DIX in NVMe Perf and
will make buffer management a little complex. This patch tries
to make them a little easier.
Change-Id: I3e0e3e03ca386467c7477e1ec8aa537ca47316e2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/437903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If user want to set PRCHK, current Perf tool requires user to
add ',' as a prefix to PRCHK.
This patch removes the limitation by referring /lib/nvme/nvme.c
Change-Id: I327810b38c02116b9580873b6046bdca55b5162a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/437913
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to make the io completion
of different ns_ctx owned by each worker in
a round robin way.
Purpose: To avoid the timeout if there are many
ns_ctxes. For example, if each ns_ctxt connects
to remote NVMe-oF target with qpair. If there are
many qpairs, we may face the time out of some qpairs.
Change-Id: I477cb7436dc46ea498a26f990ed79001fa1bf2d6
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/438150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are 2 #include "spdk/env.h" and an extra "]".
Change-Id: I7003333a164ef38ed166fbecf9e6b9f2df350ad9
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/416373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add init_crc parameter as seed value to spdk_crc16_t10dif API to generate
a CRC value spanning multiple separate buffers.
This will be necessary for upcoming DIF/DIX patches.
Having init_crc parameter is general, and so change the existing API
without adding seed version of the existing API.
Change-Id: I0ac7919b18013967e41829dcedd3e4e73204d5d6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia65e235a85207c128ba274e1bab38d6c35344239
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/435563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Format of namespace is not changed during running but namespace
information is collected by identify command for every IO.
This caused much degradation of performance.
Hence call spdk_nvme_ns_get_data() and hold the pointer to the
buffer in which namespace information is stored at registration
of namespace and use the pointer in both task_extended_lba_setup_pi()
and task_extended_lba_pi_verify().
Change-Id: I12461ccb763247bbb9ccbe34802805ace67d9400
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'-s' option is usually associated with the memory size,
but our ioat/perf and nvme/perf use it for io size.
To keep those consistent:
'-s' option (io size) was be changed to '-o'
'-d' option (mem size) was be changed to '-s'
Change-Id: I97cef4c0a4e6e902277dd50dfb43bde420a6427e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Transport addresses can now additional contain an "ns"
key whose value is a specific nsid to connect to. If
unspecified, all namespaces will be used, which is
the previous behavior.
Change-Id: Icbebe32d68a1f97acaa1197c7fec5f119f33ec4d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Low level NVMe driver will set the hardware IO queue size
based on MQES and users' input, perf tool has requested
maximum IO queue size when started, but for the number
of IO requests, it uses the default value. While here,
set the number of IO requests to a higher value, so that
for high queue depth tests, the perf tool will not fail.
Fix the issue #256.
Change-Id: I6d11ec65e0f3b246b824875fa17d74a31fd2702b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403256
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vendor:device ID is already printed out in attach_cb, so printing it
again in probe_cb isn't that useful.
This also lets us remove the last use of spdk_pci_get_device(), allowing
it to be deprecated and removed in future patches.
Change-Id: Ie65abf136cce4d413f06594f91533ab9f9d4aca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For end-to-end data protection tests with extended lba format, when
Protection Information Action bit was cleared to 0, the perf
application can do some comparison based on the flags we used
for writes. For the unexptected protection information value, print
a notice for users.
Change-Id: I9851ce6338030f9b57180cd5e46368e0c94bc212
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/394158
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is used to fix the time caculation for
average, min, max latency.
Also changes the float to double to make it more accurate.
Change-Id: Ia91278f04656787e2dcf94dd37d839bcf31d618d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394674
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Currently, each histogram range is hardcoded to
128 buckets (1ULL << 7), resulting in 58 ranges
(64 - 7 + 1) and a total size of 58 * 128 *
sizeof(uint64_t) = 59392 bytes.
To allow for more usage models in cases where this
size is prohibitive, enable the following changes:
1) specify number of buckets per range (in number of bits)
2) specify max datapoint value (in number of bits)
The latter can be useful for cases where datapoints
are never close to requiring all 64 bits - and allows
reducing the number of ranges. Any data points that
exceed the max will be tallied in the last bucket
in the last range.
Testing shows no performance disadvantage using the
dynamic approach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5979bcdff6209faaa9dee293918ef2a78679bcd4
Reviewed-on: https://review.gerrithub.io/392707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7174f1799361b8337ff5590b90ad6a0564ca8e9b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I127279ba32388bcedb85ed0a2eba9b5345c02eda
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/366532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a case in high queue depth situation and the IO may be
failed due to no memory. Our perf tool did not recognize this
and always count the IO in the inflight IOs. Thus in the completion,
it waits more than actual IOs to return and the Perf is hanging.
Change-Id: Ie5472e260c75c5abd80c06eb6c613dc7d1761c78
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/391582
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie7282eb2e9f403ae51c449389216bcaf45808277
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/386190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9ced263535e8cd9c9503a208a77832140833c9d3
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/383952
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For perf tests with large I/O size, the NVMe driver may split one
request to several entries based on stripe and maximum transfer size,
so take user's input of queue depth as default queue size of NVMe
queue pair is not accurate. Here the patch evaluate users' input
and report an error when queue entries more than hardware's limit.
Change-Id: I66922a3d673dc97796d7fbe6e86cf5037a45b37d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ie70236f6be40ad9598969da2a462af44763c4ac4
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/379437
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Fully port the remaining uses of rte_ functions from DPDK to the SPDK
env library abstraction layer.
This also simplifies buffer allocation: each task only needs to be
allocated once during the initial submit_io() call, rather than using a
mempool to get/put the task on every I/O.
Change-Id: I39c8caff81bbb1467101ba3b24a389c437075c61
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1aee7aba522cc816f69709cfc95d12c50a5d0f4b
Reviewed-on: https://review.gerrithub.io/367279
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibbe601489d16a9585e56de1c95fe31e9a602a7e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/366387
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove dpdk_ prefix in spdk_app_opts and spdk_env_opts
Change-Id: I6f231f67072b808e84945d41b1fe31a180beb350
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365787
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7ccff922465195c7fe9836633196cd7a8816c11c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365071
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this patch, we also update perf and identify
examples. If there is no local nvme device info
parsing, we will set dpdk initialization with no-pci
choice.
Change-Id: I58b2d291b7b53894aeb194a16798ff1c72cf25b4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0083365b2da63cb38aebb9f7bbc02f4dfd1ae94
Reviewed-on: https://review.gerrithub.io/365263
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
DPDK's use of getopt() needs special handling of the optind global
variable since we are passing it a separate array of arguments (not the
typical argv and argc). Set optind to 1 internally to env_dpdk so that
the apps don't need to know about it, and restore optind in case the
calling app is also using getopt().
Change-Id: Icbf07002c99fa9f94c866e8eff707124b0ef679b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365062
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also provide an option in perf tool let users to
disable it.
Change-Id: If4952513d77cecaa4f9403fbea811d86916ee87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Gracefully handle ns_count == 0 in print_performance() rather than
asserting.
Change-Id: If8f8d56a2dd4d21ddc61069555c2b90d027431f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363614
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A single -L can be used to get the latency summary.
Two -L's (or -LL) can be used to get both the latency
summary and the detailed histogram.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3fc0f4e2dfff7b041a665fe35aa33f11e4c3ebad
Reviewed-on: https://review.gerrithub.io/362270
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c47f2086d4f895cd75f32efc7df30d7182adcb1
Reviewed-on: https://review.gerrithub.io/362269
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The latency tracking is done with ranges of bucket arrays.
The bucket for any given I/O is determined solely by TSC
deltas - any translation to microseconds is only done after
the test is finished and statistics are printed.
Each range has a number of buckets determined by a
NUM_BUCKETS_PER_RANGE value which is currently set to 128.
The buckets in ranges 0 and 1 each map to one specific TSC
delta. The buckets in subsequent ranges each map to twice
as many TSC deltas as buckets in the previous range:
Range 0: 1 TSC each - 128 buckets cover deltas 0 to 127
Range 1: 1 TSC each - 128 buckets cover deltas 128 to 255
Range 2: 2 TSC each - 128 buckets cover deltas 256 to 511
Range 3: 4 TSC each - 128 buckets cover deltas 512 to 1023
Range 4: 8 TSC each - 128 buckets cover deltas 1024 to 2047
Range 5: 16 TSC each - 128 buckets cover deltas 2048 to 4095
etc.
While here, change some variable names and usage
messages to differentiate between the existing latency
tracking via vendor-specific NVMe log pages on Intel
NVMe SSDs, and the newly added latency tracking done
in software.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I299f1c1f6dbfa7ea0e73085f7a685e71fc687a2b
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required by libaio. Previously, buffers were aligned to 512
bytes, but 4K devices need 4K-aligned buffers.
Change-Id: I96080e72dc77e0e72f426f7c9fe98b6724f66e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Several examples have a function to associate workers
with threads. Simplify that algorithm.
This seems to just shift some of the complexity
from register_workers down to main, but in the long
run the DPDK threading will get abstracted into
env as well and greatly simplify that part.
Change-Id: Ic106dde58fa5351a1ce0a058161b08062e121d3b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we know the queue depth that we will be using during the test,
request that as the queue size when attaching to NVMe controllers.
Reserve one extra queue entry above the expected queue depth since NVMe
queues must always have one entry free to distinguish between queue
empty and queue full cases.
Change-Id: I809982207edb4894148aec09b10c4e2de4a040d3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Map the DPDK hugepage virtual address space to an area that should not
interfere with randomized mmap() addresses.
Change-Id: Iffc657858f861fc1316f77b68f9f121167d604b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the user to connect to multiple remote NVMe-oF targets or to
specify multiple specific PCIe device addresses to test.
Change-Id: I05b2072b8aa1480891b37b17b5207369344b617d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The memory allocation is based on user specified queue depth,
number of attached active namespaces(aio files) and number of
cores involved in the IO operations.
Change-Id: I370b9fdacc1bb40d110bec7e96adac2424d39431
Signed-off-by: GangCao <gang.cao@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be obtained by parsing traddr into a pci_addr,
then getting a handle to the pci_dev and asking for all
of the pci information.
Change-Id: I1948cbd3ec65611293192ef5558ace19dd444d4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of repeating the fields, just embed a transport_id.
Change-Id: I282704c9d59784abd5f7c93be4e47c673fcf6dde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Writing 0's hits SSD firmware special cases and gives
unrealistically high performance numbers.
Change-Id: I73c72ee52494075e354dcddd067e3ce49c156204
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use O_WRONLY flag for write IO
Cleanup io_context_t and io_event when perf exits
Change-Id: Iefa1d8be5e017a1ca5719489c1ec4b868df94722
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Free memory of worker_thread, ns_entry and ns_worker_ctx when perf
exits.
Change-Id: I4707eea31ca1a1c4a9ce6ded857c4576e57b4532
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The new probing API will find all NVMe devices on the system and ask the
caller whether to attach to each one. The caller will then receive a
callback once each controller has finished initializing and has been
attached to the driver.
This will enable cleanup of the PCI abstraction layer (enabling us to
use DPDK PCI functionality) as well as allowing future work on parallel
NVMe controller startup and PCIe hotplug support.
Change-Id: I3cdde7bfab0bc0bea1993dd549b9b0e8d36db9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Optionally enable and display the I/O latency histograms as reported by
the hardware if supported (e.g. Intel DC P3x00 NVMe devices).
Change-Id: I5c0138d51a282138b74f36fe8e1461c9444e6d0f
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support for the Force Unit Access and Limited Retry
bits on reads and writes.
Change-Id: I9860848358377d63a967a4ba6ee9c061faf284d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This more accurately represents what function it performs.
Also remove pci_device_has_uio_driver() from the public API. Callers
should use pci_device_has_non_uio_driver() instead.
Change-Id: I9623fe1345b43e981d5823804e33d01ac0d3bb1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This doesn't really matter, since the program will be exiting
immediately if associate_workers_with_ns() fails, but it makes static
analyzers happy.
Change-Id: Ic21d234dec50bd2b6684b5fe2caa78d616f93052
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the I/O size is larger than the total namespace size or smaller than
the block size, ignore that namespace in the perf utility.
Change-Id: I297303d8c41ceb36eef91c6c33da809a35758f4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to remove the unused pci_dev parameter from the nvme
perf utility functions that no longer need it.
Change-Id: Ib139b080b7668aed712b4489c5ee95bd2fa2b350
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, as soon as a worker thread failed, the program would exit
before printing results.
Also add a message at exit time if any errors occurred during test
execution.
Change-Id: I7b3920f0acb8ce364e2bc5cbb78bbe88f3fa7146
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This matches the size of the request pool and enables running with a
higher concurrency level.
Ideally, these limits should be calculated from the requested queue
depth and number of workers, but for now, just increase the hardcoded
limit.
Change-Id: I6e890efc78a1336dddc0ab61db20c68004b30f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if the work function on the master lcore failed, the perf
program would still return with a successful exit code.
Change-Id: Iec91c1f60824759ae62476ef6dce670fd402ddc5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Do not continue running the thread work function if that thread could
not get an I/O queue.
Change-Id: I89033250bde0663f073ff35c76d1558d55b72ece
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Intelligently allocate cores and devices to handle
the following cases:
1) Equal cores and devices
2) More cores than devices by using multiple cores per device
3) More devices than cores by using multiple devices from a single core
Change-Id: I3703f5c523268539bd00d399fe104c474a8e8c99
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This helps weed out functions that should be static, functions that are
not declared in public header files, and .c files that don't include
their .h interface headers.
Change-Id: Ie39f83ad4b320847e4a938bd1d4d0b4fa21c2ffa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix all of the uses of __thread so they are at the beginning (similar to
e.g. static).
Don't actually enable -Wold-style-declaration, since clang doesn't
understand that.
Change-Id: I0dcbb758143eab90fc978334c8f256c6602cc4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows comparing the Linux kernel driver's performance to the SPDK
user-mode NVMe driver.
Change-Id: I71c70163a4133c2f237c8c57b3c698ec261455f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Like sprintf() with automatic buffer allocation.
This should help to avoid fixed-size buffers in
non-performance-sensitive code that formats strings.
Change-Id: I35209ae84014ed5daf41baa5b03af8a5f6b02b8e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps enable FreeBSD, where pciaccess pci_device_has_kernel_driver()
is not functional. The function will return 0 if there is no driver
attached, or the Linux uio or FreeBSD nic_uio driver is attached. It will
return 1 otherwise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0921e61c9040b1e0411b5dc40b36fc7f2721c8c5
