- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8cc8fc38a827444f89762aa45ee536da08696be5
Signed-off-by: Lu Fan <lux.fan@intel.com>
Reviewed-on: https://review.gerrithub.io/361876
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
A single -L can be used to get the latency summary.
Two -L's (or -LL) can be used to get both the latency
summary and the detailed histogram.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3fc0f4e2dfff7b041a665fe35aa33f11e4c3ebad
Reviewed-on: https://review.gerrithub.io/362270
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make sure the hotplug instance not exit before all the hot insert and
remove events done, the setup.sh for hot insert events will use several seconds
sometimes.
Change-Id: I4ad61937760529547cdcf7701f3c3d9033121e45
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/362131
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The latency tracking is done with ranges of bucket arrays.
The bucket for any given I/O is determined solely by TSC
deltas - any translation to microseconds is only done after
the test is finished and statistics are printed.
Each range has a number of buckets determined by a
NUM_BUCKETS_PER_RANGE value which is currently set to 128.
The buckets in ranges 0 and 1 each map to one specific TSC
delta. The buckets in subsequent ranges each map to twice
as many TSC deltas as buckets in the previous range:
Range 0: 1 TSC each - 128 buckets cover deltas 0 to 127
Range 1: 1 TSC each - 128 buckets cover deltas 128 to 255
Range 2: 2 TSC each - 128 buckets cover deltas 256 to 511
Range 3: 4 TSC each - 128 buckets cover deltas 512 to 1023
Range 4: 8 TSC each - 128 buckets cover deltas 1024 to 2047
Range 5: 16 TSC each - 128 buckets cover deltas 2048 to 4095
etc.
While here, change some variable names and usage
messages to differentiate between the existing latency
tracking via vendor-specific NVMe log pages on Intel
NVMe SSDs, and the newly added latency tracking done
in software.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I299f1c1f6dbfa7ea0e73085f7a685e71fc687a2b
Fix up a second copy of linux_iter_pci in the same manner as commit
6562e95092 (scripts/setup.sh: support
systems where more than one domain is used).
Change-Id: I3d9b842891d70c2960de8287e3b11c1a11b02d1f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The first time this test runs on a machine, it will not have the SSH key
in its known_hosts, so allow it to connect without user intervention.
Change-Id: I27f750f41e1819b526197af2d0b9ae15382d9aa4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also adds the automation test case for using remote
NVMe devices exported by NVMe-oF target.
Change-Id: I2b839a4eeec33d5b0c30d654e6013ad8c7949e23
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Core dumps stop working if the path is longer than 64 bytes.
Use readlink to shorten some of the very long relative paths.
Change-Id: I5e7eb6580ca581c5ac3a71afb7b62953836e2660
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
After checking the code, aerl in our session is 0,
so there will be only 1 AER. So currently,
we will only handle 1 AER case.
When the AER event is triggered by real NVMe device owned
by the subsystem, it notifies all sessions belonging to
the subsystem.
Change-Id: Ia80fb0f03e893c20d8dd14afbed8db10db38301c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For namespaces with end-to-end protection information, metadata size
of exactly 8 bytes, and extended LBA configured, the NVMe driver would
calculate the size of the data block incorrectly. The NVMe spec has a
special provision for this specific case (8-byte metadata only) and
PRACT = 1 that requires that the host does not send the metadata as part
of the host memory buffer.
To fix this, clean up the calculation of the per-block data transfer
size by adding a new extended_lba_size field in the namespace, which
represents the total size of data to be transferred per block based on
the namespace's configured metadata size and whether it transfers
metadata as part of the data buffer. Then add the special case for
PRACT = 1 and PI configured and extended LBA in the R/W helper
functions.
Change-Id: I0b383a58c773cac06e6c018858b57129064c6059
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for using this in tests for other libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd4d12006d602f772cd9253f3eab9d47c0593767
The PCIe transport initializes the quirks directly, so the generic hook
to get PCI ID is no longer necessary. This path was dead code.
Change-Id: I25bdaa598db53e4312a264d9d8356d1b416696e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The logic to fail queue pairs when the controller is failed should be
handled in the generic code, not in the individual transports.
This also allows nvme_qpair_fail() to be private to nvme_qpair.c.
Change-Id: I6194576dceb35073b9af8847e59314900028637c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This make sure the qpair failure could be started from upper level application.
Change-Id: I7e04fe36929cc634ddf0078db96fbc40afb38f8c
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Now that unittest.sh is run as part of the automated tests, drop the
various unit test calls scattered throughout the tree.
Change-Id: Iea98314bb7f04620d72d81d25e24f8e706b50ce1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test already links nvme.c via OTHER_FILES, which provides the
g_spdk_nvme_driver definition.
Also make g_request static while we're here, since it is only used
within this test file.
Change-Id: I9f1a2a7b3d40d2ea0989f6f781a4d220afbd3f0e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently we use the pci functions provided by DPDK,
it identifies the device by class id related
info but not by pci bdf info, so we can add the filering
by pci_addr in pcie_nvme_enum_cb function.
Change-Id: I5942e98853f00fc10fa6aae5c113517653d1b357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
