It makes it possible to check the number of times a task was submitted
to be executed by a module, even if we defined a submit() function for
that opcode.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id6b592b0461c722bf22ab04d5bad1a7542bb17e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16546
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This loop produces a LOT of logs, which aren't very useful, so silence
them to reduce the clutter in the logs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5032c2c5bc309f8b29455349adf7063c7e9d50cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16648
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Apply this patch, when building SPDK with external DPDK (versions 22.11.0+).
Change-Id: I0a09dbe6b4ee9519d51a0b4cb881844b96d94779
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16702
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
This change is already present in the upstream, no need to patch it
ourselves anymore.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I12c9eb59ee202a7e240542876a51977ef2f2d4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Starting in SPDK 23.01, calling spdk_bdev_register() and
spdk_bdev_examine() from a thread other than the app thread was
deprecated. This commit removes the deprecation and as such calling
these functions from a thread other than the app thread is an error.
As a side effect of this commit, all bdev module examine_config() and
examine_disk() callbacks will be called on the app thread.
Change-Id: Idaae06608101e2a513d9312ac5544ffe94effe4a
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
With the introduction bdev module claims v2, existing consumers should
transition off of v1 claims. This transitions blob bdevs from v1
exclusive writer claims to v2 read write once claims.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I1884585a540fa17ee341430e03de3c4f5d35322b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16168
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a unit test to ensure spdk_bs_bdev_claim() takes an exclusive write
claim and it is released when the destroy callback is called.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ia5185545b148a8a83315c688a9c99a16b199063a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16230
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This creates a minimal test for module/blob/bdev/blob_bdev.c.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I04698863f3228a27f73a90d50f0d5fbde30c0870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16229
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The original implementation of bdev claims allows a module to establish
an exclusive writer claim on a bdev that has other descriptors open for
writing. This is arguably a bug. With claims v2, this bug does not
exist. The conversion of spdk_bs_bdev_claim() to claims v2 exposes this
bug in the vhost_negative test.
This patch removes an extraneous vhost_scsi_controller_add_target RPC
call that left Malloc0 open read-write while bdev_lvol_create_lvstore
tries to create an lvstore on Malloc0.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I963e210e1bc033d8720e240760004ed8aef7fda3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16169
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
If multiple claims exist on a bdev, examine_disk() is called for each of
them.
Change-Id: I0a6dc3e4bd1da20bbcbddf97a16e04c62c82354c
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This implements the v2 claims API. Compared to the original v1 claims,
v2 claims:
- Support read-write-once, read-write-many, and read-only-many claims.
- Are claimed with spdk_bdev_module_claim_desc().
- Are associated with a bdev descriptor that is passed to
spdk_bdev_module_claim_bdev_desc().
- Are released upon close of the bdev descriptor used to obain the
claim.
- Cannot be taken when a descriptor other than the one passed to
spdk_bdev_module_claim_bdev_desc() has write access.
Later commits in this series are needed to fully integrate them with the
bdev subsystem.
Change-Id: I39a356f5893aa45ac346623ec9ce0ec659b38975
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15288
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Due to a problem described in github #2886, we
were not able to run verify payload with big IO
and big queue depth. This problem was fixed with
iobuf utilities, so now we can increase queue
depth in this test.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7b8935d17411c260ba416608444106684c17a0cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Otherwise the cmd fails due to the lack of config.mk. This forces
autopackage.sh, test_make.sh, etc. to be executed in the environment
where SPDK was already built which shouldn't be really a hard
requirement as they always re-build the SPDK for their own purposes.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie3971acbf354734ed9c5c72d49bb93fc2ccc45f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Also, keep it in global scope as $spdk_conf rather than passing it
as a positional argument to whatever routine that may depend on it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I68532d5848e0bd7ee8519ef3e308b24ab6a38876
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
New option is introduced as well, 'ext', which tells autobuild to
run only external code tests - these deserve to have their own option
as they require proper env to be in place (access to hw, hugepages,
etc.)
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2d74d1ee9b4b3d4dd83150b235eceff76fafd1ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_bdev_unregister_by_name() is safer than spdk_bdev_get_by_name() +
spdk_bdev_unregister(). It is ensured that the specified callback is
executed after unwinding stack for spdk_bdev_unregister_by_name().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5cc1e88a7e389ab173ef1195bd817d2aac6a70d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.
Once again, replace remaining cases in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will improve media mgmt notifications but it will be
almost same as _resize_notify() and _remove_notify().
On the other hand, there are a few differences between _resize_notify()
and _remove_notify(). _remove_notify() will be better.
To avoid duplication, unify _resize_notify() and _remove_notify() by
adding abstraction event_notify() and _event_notify().
Add unit tests for the complex race conditions.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibe2478479c61459c0da0db8d28c7273f05275e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This function is an alternative to xtrace_disable() which works
within a smaller scope, i.e., per cmd. Useful to quickly hide
verbose output without disabling entire tracing.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I284eafaf0e74764f329a7a6897a7d7fa85176de7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16363
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done in order to speed up entire lookup and be more robust
with matching target processes. This implementation also tries to
detect processes executed outside of the local repo workspace - this
is most relevant for the CI where lingering processes may come from
different jenkins workspaces (i.e. executed by different jobs).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id4f62302701f064ad00906497379e16ff8c04993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16356
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_by_name() is also not safe and bdevio_construct_target()
calls spdk_bdev_open_ext(). Hence, by adding a extra abstraction, remove
spdk_bdev_get_by_name() call.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6f4cbe82a02ff1affb215c7e2d8681d76d1afb96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
At the previous refactoring, most use cases for spdk_bdev_first/next()
were replaced by spdk_for_each_bdev(). However, test/bdevio was not
changed because this was a test tool. Finally, replace
spdk_bdev_first_leaf() and spdk_bdev_next_leaf() by spdk_for_each_bdev()
for test/bdevio in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie62e7d2438b877e903af7882181564f8b7407c4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Split each test into its own function. Oncoming patches will expand
on this approach.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I61f3a8847ae65a25504acdf22301757d35c0408d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This will allow for these routines to be used by the external
entities, allowing for more granular approach.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibb753a4900ef927b82e50b7c8af2780d8ff695ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
These routines can only handle a single buffer; double check that is the
case, and fail if not.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I136482c27c73655887c49405f747b8ed073f7b69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I3084254ec44cfc4e11f8beccc61c895232daf272
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use req->iov as needed, to make it easier to remove req->data later.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie625f374e846f7e6afd6a5d143a5174d27d419b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add a new API for incremental copying in or out of an iovec, and replace
current code to use the new API.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I088b784aef821310699478989e61411952066c18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We should always called the unregister callback on
the same thread that spdk_bdev_unregister() was
originally called. So save the thread pointer and
use an spdk_thread_send_msg() to make sure it gets
called on the correct thread when the unregister
finishes.
Also add unit test that reproduces the original
issue.
Fixes issue #2883.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3d89368aa358bc7a8db46a8a8cb6339340469d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16554
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 95aa1a7337,
which introduced a race between timeout command
and reading its subprocess PID.
Change-Id: I4450449f8bd3fa5a71a11e5ea445dce360a4ec06
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16510
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
test/ublk/ublk.sh 256
will now create 256 ublk devices, to try to test
the ctrlr_cmd queueing logic when the ctrl uring
runs out of sqes.
It's actually difficult to induce the condition,
since the kernel SQPOLL thread can usually keep
up with the SPDK process submitting the control
commands. The best way to induce it is by
*not* stopping the disks at the end of a test
with a lot of disks, and letting ublk_destroy_target
stop all of them at once. Even then, with the
ublk logging enabled, even that extra delay for
each commands opcode is enough to help the
SQPOLL thread to keep up. Commenting out the
first UBLK_DEBUGLOG in ublk_ctrl_cmd() does help
it run out of sqes, at least in my setup.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f7a6ca29fd69613d44a89adc7e60563b274d155
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will help with debugging more complex
ublk configurations - needed especially knowing
that ublk kernel driver is still a bit flaky.
Create a new LOG flag "ublk_io" for the existing
per-IO debug logs, and use the existing "ublk"
flag for ctrl-related debug logs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic019c1e837b04dbf5d210c46a98cfbed732278a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Avoid hotplug application timeouts on machines
with multiple NVMe drives by scaling app run time
to number of NVMe drives.
Furthermore, change the way we wait for hotplug
app initialization by using "perform_tests" RPC,
and termination by starting it via timeout command.
Second part of the series fixing #2201.
Fixes#2201
Change-Id: Id82c8e8f6b9e870a55c4f43a11c755982855deeb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This driver was removed from the mainline kernel over 3 years
ago, hence there is no much point in keeping it around.
Currently, this attempt simply spams build log with info
that we failed to load said driver.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8bc65f652f6476a9cdf4fa4849ee03d8d547402c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, drop parallel build as it's not a good fit for QAT's make
structure - its recursive nature ends up failing on ocassion
where some *.a libs cannot be found by targets that depend on
it (one such pitfall is libosal.a built for the kernel space).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8c773c234d80fcfcad2c0991e3f5202dfb1d2018
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
This is done in order to align our requirements with the 6.x kernel
that we already support under the CI (as part of the fedora37 build).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I88ff07a0de49c0f9ff90caf54b2690c90ef108b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add a script with functional tests for
CPU core locking mechanism.
Change-Id: I041b31f04b6cfb0ba26a7d172c83686646d8386e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15465
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If probe attached before io switch to second port, previous port is
still present in trace log.
This patch fix issue #2865
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: If45d07a737721c6754392b7db8cce426e6090bd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16386
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we do not have a way to dump opts
for virtio_blk transports. This patch introduces
necessary changes to let us save and load those
via JOSN config.
Change-Id: I7ee4f31062f3d4a264f322e66a67ba3d075f1d75
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the perf application is run in the background the script would
not pick up its potential crash - the main condition itself was simply
checking if app is still running. Since there were occasions where
the failure was missed up until the cleanup stage, try to catch it
early on by verifying perf's exit status - hook it into NOT() as
the app is expected to fail by the test but we need to filter out
crash scenarios.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9a9304616c0a4dba42467f65c1a2c770352f08ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Any script or function called with run_test needs to
either execute or not be called at all.
Summary of all test executions is gathered based on that.
It would be possible to not catch that the test didn't execute.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib93d4ee9cccbcfa8506f9022f1a7cce97c0434f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The addition of mbuf splitting requires a few more unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I24309911d40aec14e7f7c504be276c7f79e3ef1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Quite a few changes from the vbdev compress unit tests
mainly due to plumbing and structural changes from the
code under test now being an accel_fw module instead of
a bdev module. Coverage of critical functions matches
what it was for the common code.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia40c7a0ed72a427e71c00607d93e215e0265fcb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new compressdev unit tests will re-use quite a bit of code
from the old compress vbdev module so start this that so that the
next patch will be easier to review what's changed for as the
accel compressdev unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id91bb8630213e6046a5b38f31227476a33eb0675
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add rpc methond for ublk target creation and destruction. Before to
add ublk device, need to initialize ublk target to create ublk
threads, corresponding an rpc methond to destroy ublk target is
also added. It will deinitialize ublk target and release all ublk
devices.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I5db0cf9cc68745440df999169aa1c61111010e02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
ublk backend could support ublk driver with kernel. Specify
configuration parameter to start it up.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I55e7d757e04315b25e9bfab5fdcbb6621be3e29e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15680
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The configuration is generated based on existing host's NUMA
topology (as seen via sysfs) instead of a total number of cpus as
it was done before. New logic attempts to load balance VMs and
their cpus based on nvme drives' NUMA location. If there is no
enough cpus left under the target node, all remaining nodes are
checked. For the sake of the performance, cpus are not mixed
between different numa nodes.
Disk map is created by mapping VMs to existing nvme drives
based on their NUMA location. Extra VMs are assigned in bus
order of the nvme drives.
SPDK cpus are split by matching the VM-to-nvme NUMA ratio.
Static list can be defined as well to override this behavior.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia63c6f9a472a685d252efd110eaba7b114a87d2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Attempt to send any queued writes even if the socket is in a group. This
will not work if there is a send task already outstanding.
Change-Id: Icc0b5884e3d247042194ad26b30340ceb824886c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
That was the main intention behind the following patch:
https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
however, the introduced logic was faulty. Fix it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I84ec7ba79d477756c9064e592e93140e68038bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Bdevperf build directory was changed but
not updated in this script.
Change-Id: I939b541dbea6c94e7e2d3592890f4a4e8998d321
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We will be creating a new accel module for DPDK
compressdev. We can heavily leverage all of the
code from the existing vbdev_compress.c file. So
just copy that file exactly to start, and then the
next patch will contain only the deltas for removing
the bdev/reduce plumbing and adding the accel
plumbing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6ca1c2dad92eb8dd38b351602b65b8cb4ee4e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Adding script mdns_discovery.sh to test the mDNS discovery service at the host.
The script tests the RPC commands bdev_nvme_start_mdns_discovery, bdev_nvme_stop_mdns_discovery
and bdev_nvme_get_mdns_discovery_info.
avahi-publish tool is used to simulate the advertisement of the discovery service of the target subsystem.
Signed-off-by: Parameswaran Krishnamurthy <parameswaran.krishna@dell.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieace458f87b5d9bd51aeb651d9419d07b6fee6d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is a combination of commits which update vdev_crypto:
110d8411e bdev/crypto: do not create mempool for session private data
495055b05 bdev/crypto: update rte_cryptodev usage for DPDK 22.11
02caed6b5 bdev/crypto: remove mempool usage matching < DPDK 19.02
5887eb321 bdev/crypto: do not track type of crypto session
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I30c4f76e4e7b4865a7daa638d357888bb5e02071
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The io paths' stat will get lost when they are destroyed. Record
the stat in the nvme_ns structure.
Change-Id: I12fc0b04fac0d59e7465fe543ee733f2822a9cdb
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14744
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have stat per bdev I/O channel, but for NVMe bdev
multipath, we don't have stat per I/O path. Especially for
active-active mode, we may want to observe each path's statistics.
This patch support IO stat for nvme_io_path. Record each nvme_io_path
stat using structure spdk_bdev_io_stat.
The following is the comparison of bdevperf test.
Test on Arm server with the following basic configuration.
1 Null bdev: block size: 4K, num_blocks:16k
run bdevperf with io size=4k, qdepth=1/32/128, rw type=randwrite/mixed with 70% read/randread
Each time run 30 seconds, each item run for 16 times and get the average.
The result is as follows.
qdepth type IOPS(default) IOPS(this patch) diff
1 randwrite 7795157.27 7859909.78 0.83%
1 mix(70% r) 7418607.08 7404026.54 -0.20%
1 randread 8053560.83 8046315.44 -0.09%
32 randwrite 15409191.3 15327642.11 -0.53%
32 mix(70% r) 13760145.97 13714666.28 -0.33%
32 randread 16136922.98 16038855.39 -0.61%
128 randwrite 14815647.56 14944902.74 0.87%
128 mix(70% r) 13414858.59 13412317.46 -0.02%
128 randread 15508642.43 15521752.41 0.08%
Change-Id: I4eb5673f49d65d3ff9b930361d2f31ab0ccfa021
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support to specify rr_min_io for multipath round-robin policy,
which makes I/O switches to another io path after rr_min_io I/Os are
rounted to current io path.
Change-Id: I09f0d8d24271c0178ff816fa63ce8576b6e8ae47
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support selecting io path according to number of outstanding io of
each path in a channel. It's optional, and can be set by calling
RPC "bdev_nvme_set_multipath_policy -s queue_depth".
Change-Id: I82cdfbd69b3e105c973844c4f34dc98f0dca2faf
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we submit more tasks than supported by qp,
extra tasks are queued on io_channel. Later completion
poller tries to resubmit these tasks one by one. That
is not efficient since every enqueu_burst may cause
doorbell updates in HW.
Instead add a check for qpir capacity and submit
appropriate number of requests. If qpair is full,
tasks are queued in dedicated list. This approach
should remove or minimize the need to resubmit
individual crypto operations.
This also handles a case where there are no entries
in global pools (crypto_ops or rte_mbuf)
Fixes issue #2756
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iab50e623e7a82a4f5bef7a1e4434e593240ab633
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously vbdev_crypto used DPDK directly and
the restriction on max IO size was propagated to
generic bdev layer which split big IO requests.
Now, when DPDK code is a standalone accel module,
this restriction on max IO size is not visible to
the user and we should get rid of it.
To remove this limitation, allow to submit crypto
operations for part of logical blocks in big IO,
the rest blocks will be processed when all submitted
crypto ops are completed.
To verify this patch, add a functional test which
submits big IO verify mode
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I0ee89e98195a5c744f3fb2bfc752b578965c3bc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Lcov is disable for clang due to being time-consuming. This patch
enabled it for fuzzer only. `llvm-gcov.sh` is a wrapper for llvm-cov
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I96ef6ad4fc4ecb92b063070fd2410ca88209f5b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move parallel arrays of response buffers and response SGLs from
qpair to a new responses object.
Use options to create the responses object.
Use spdk_zmalloc() to allocate the responses object because qpair
is also allocated by spdk_zmalloc().
The purpose is to share the code and the data structure between
SRQ is enabled and disabled.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ia23fe7328ae1f2f551fed5863fd1414f8567d602
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Unit tests are already linked with isa-l-crypto if CONFIG_ISAL_CRYPTO is
set, so there's no need to stub them. And by not stubbing them, we can
do tests involving actual encryption/decryption.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I162a2cd26112cc5adb8eeed7336f4280aa4bdb6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Accel modules can now implement the get_memory_domains() callback to
indicate the types of memory domains they support. If unimplemented, a
module is assumed not to support memory domains and accel will take care
of pulling/pushing data to local buffers prior to passing a task to be
executed by a module.
For now, similarly to the bdev layer, we only check if a module supports
memory domains, but we don't verify the types of the domains. That
could be easily added in the future, if necessary.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia513f4f31124672b705b6dd33a2624f0ae94d3ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It allows accel to store private data per each opcode/module without
having to change externally visible structures or allocate anything when
a module is registered. Since a single module can service multiple
opcodes at the same time, so some of these values might be duplicated.
However, there are only a handful of opcodes, so it shouldn't be a
problem.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I609a6ccc2d241cb9b8273cc2c6d1933d2bc25e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the destination buffer is in remote memory domain, we'll now push the
temporary bounce buffer to that buffer after a task is executed.
This means that users can now build and execute sequence of operations
using buffers described by memory domains. For now, it's assumed that
none of the accel modules support memory domains, so the code in the
generic accel layer will always allocate temporary bounce buffers and
pull/push the data before handing a task to a module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia6edf266fe174eee4d28df0ca570c4d825436e60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the source buffer is from a remote memory domain, we will now pull it
to the temporary bounce buffer before a task is executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I476684a4359410c69dd69a2b425b9e61d4c55a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All operations are using iovecs to describe their buffers and only
encrypt/decrypt additionally used nbytes to store the total size of a
src buffer. We don't really need this value in the generic accel code,
so we can let modules calculate it, if necessary. That way, we won't
waste cycles calculating it if a module doesn't use it and it makes the
code a bit easier, as we won't have to deal with the fact that nbytes is
only valid for certain operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I29252be34a9af9fd40f4c7fec9d0a0c1139c562d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, since this was the last operation using dst and nbytes, these
fields were removed from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d6b090e101c016d1bdcbe7a3bee7d6f691f1c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, since this was the last operation using src, remove this field
from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55fd98697ef4f92a13dd0563b4adf9ccb0af171b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement the resize function for RAID0. raid0_resize() calculate the
new raid_bdev's block count and if it is different from the old block
count, call spdk_bdev_notify_blockcnt_change() with the new block count.
A raid0 bdev always opens all base bdevs. Hence, if the size of base
bdevs are reduced, resize fails now. This limitation will be removed
later.
Add a simple functional test for this feature. The test is to create
a raid0 bdev with two null bdevs, resize one null bdev, check if the
raid0 bdev is not resize, resize another null bdev, check if the raid0
bdev is resized.
test/iscsi_tgt/resize/resize.sh was used a reference to write the test.
Using jq rather than grep&sed is better and hence replace grep&sed by jq
of test/iscsi_tgt/resize/resize.sh together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07136648c4189b970843fc6da51ff40355423144
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of VMs and Vhost controllers.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1a445379e755939875aebe97a6360ec0b0586287
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16267
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fuzzer logs may become huge, it's better to store it as file.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ia85eb88fd648dc2fb90f5a3bd389e6df2ef0106e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep corpus directory that trigers new code coverage.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2a5154472588669fddd87c97cc952da1a92ae0ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, make it possible to remove copy operations following a fill
operation if they're using the same buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7da195ce80650a02c5db99d9400ee692f797b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some of the copy operations can be elided, so they're not the best for
this kind of test. So, use another operation, decompress, that can be
appended to an accel sequence.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic59e7678436bdf1d5ab6eb103de4cc0c0c347b9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace src2 with an iovec + iovcnt and rename it to s2 to
keep the naming consistent with the source buffer (s).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I44787128377addd514818ec5aaec084b1a31f0c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace dst2 with an iovec + iovcnt and rename it to d2 to
keep the naming consistent with the destination buffer (d).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib394c127eeb5890451535ff485f96f7edd2897a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch is first in the series of patches aimed to make all accel
operations describe their buffers with iovecs. The intention is to make
it easier to handle tasks in a generic way.
It doesn't mean that we change the API - all function signatures are
preserved. If a function doesn't use iovecs, we use the aux_iovs array.
However, this does mean that each accel module that provides support for
a given operation will need to be adjusted to use iovecs.
Additionally, update the unit test checking copy elision to verify the
buffers of the copy operation that is left.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e6d8d1be3b8b9706cb4a6222dad30e8c373d8fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Users can now specify buffers allocated through `spdk_accel_get_buf()`
when appending operations to a sequence. When an operation in a
sequence is executed, we check it if it uses buffers from accel domain,
allocate data buffers and update all operations within a sequence that
were also using those buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I430206158f6a4289e15f04ddb18f0d1a2137f0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
