nvmf_ctrlr_cmd_connect() can only handle a request in one buffer
(req->data); sanity check it's not split across IOVs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I595d8542ce71e56cf2b074f4cf41bce440f6dc26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16123
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This code has a similar potential problem as the identify
and log page commands did: stop using req->data in favour of IOVs.
We also need to fix the unit tests to initialize the iovs.
We don't change the existing "set" behaviour of requiring a single IOV
here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I257567a7abd5fc3ed9ee21b432c7da7d70fbbde0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16122
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the previous fix:
adc2942ad nvmf: nvmf_ctrlr_get_log_page use iovs to store the log page
a data corruption bug in the log page code was fixed. Previously, it
used req->data, which may be too short a buffer in the case that the
buffer is split across more than one IOV. req->data is never safe to use
in this situation. The code was changed to use the provided iovs instead
of req->data.
However, the identify command handling was still vulnerable to this
problem, and has been seen in real life at least with a CentOS guest VM.
The fix is basically the same: use the IOV utility functions to write
out the response instead of directly trying to use req->data.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I00445895af20e43be73189629576eee0667f86dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16121
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move the IOV handling code in ctrlr.c to the top of the file, for
subsequent use.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibddde1cb964d8aaecf4673ffa6d4147d0a48020c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a define for the Identify command buffer instead of using a raw
value.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9073ff84e2fa2ef9268051b898fe1027d8e97baa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Basic IO completion counting can be done at the common
layer, to enable some level of stat tracking even for
transports that don't have transport-specific tracking
yet.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If04f854b97440089b8ad149b64cb59173c73975c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
In _free_ctrlr(), ->endpoint can never be NULL, and the code was
self-contradictory; assume it's not NULL.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I81a449123ca05f64460380dc3a8ad8af2143d166
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use standard "sqid" naming for a log message.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Icca8415cd17272ca7bd82667721c4131dd1df7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Both the length of a request and the number of ranges to copy are
controlled by the user, so we should check them and return an error
instead of asserting that they're correct.
This fixes the `test/nvmf/target/fabrics_fuzz.sh` test.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3481c4bb1f2c7676df81f41dfc95ef063924222e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15805
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If a lot of qpairs are connected all at once, the
RDMA optimal_poll_group logic does not work correctly,
because it only accounts for qpairs that received
their CONNECT capsule. Now that we have a counter
for a poll group's unassociated qpairs, use that value
to supplement the current io qpair count.
We can just assume for now that all of these unassociated
qpairs are io qpairs. That won't always be true, but
for purposes of picking the optimal poll group it is
sufficient.
Note that for RDMA, we could increment the counters
based on the RDMA qpair ID in the private data in the
rdmacm connect, but to keep the code simpler and common
across all transports, we defer the accounting until
after receiving the CONNECT command, so that it is
the same for all transports.
Fixes issue #2800.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5897d6ebac23d3b78b100e3fef5a7f9fb5304820
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15695
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use a local variable to hold the qpair count.
While here, also use pg_current to get the min_value,
this is a bit simpler to read than things like
(*pg)->group.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65771fb469f021e9e77b8a6c117841b8f4b66af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We make decisions on how to pick a poll group for a new
qpair by looking at each poll group's current_io_qpairs
count. But this count isn't always accurate since it
doesn't get updated until after the CONNECT has
been received.
This means that if we accept a bunch of connections
all at once, they may all get assigned the same poll
group, because the target poll groups counter doesn't
get immediately incremented.
So add a new counter, current_unassociated_qpairs,
to account for these qpairs. We protect this counter
with a lock, since the accept thread will increment
the counter, and the poll group thread will
decrement it when the qpair receives the CONNECT
allowing us to associated with a subsystem/controller..
If the qpair gets destroyed before the CONNECT is
received, we can use the qpair->connect_received
flag to decrement current_unassociated_qpairs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8bba8da2abfe225b3b9f981cd71b6f49e2b87391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently we use qpair->ctrlr at qpair destroy
time to decide if we need to decrement the
qpair's poll group's qpair count. But this is
not correct - these counters get incremented
when the CONNECT is received, but qpair->ctrlr
doesn't get set until later.
So add a new connect_received bool to the spdk_nvmf_qpair.
Use this instead to determine when we should decrement
the poll group qpair counters.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I174a0fda36c4558171953bf58f2f5117bc074f76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At least recent Linux guest VMs send SPDK_NVME_IDENTIFY_CTRLR_IOCS as a
matter of course. While this isn't supported in lib/nvmf, as this
doesn't represent an error, reduce the log level of the error message so
we don't spam the logs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I095de3e4331b3912cbc457da6d722b9883ec7884
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Optimal I/O boundary causes I/O to be split in the nvme driver. This is
a problem for writes if write_unit_size > 1 because the split I/O may
not match the write_unit_size.
Fixes: #2791
Change-Id: I437e6cb6d8e2415658d5b46539feeacb5363fd46
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The correct SPDK thread is already contained in the poll group.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I4eefe2ba60c77c01a866a693bccbb8affc8262ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the guest performs a hard shutdown we're not deleting the CQs:
nvmf_vfio_user_close_qpair calls delete_sq_done, which won't delete
the CQ because vu_ctrlr->reset_shn is false.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I383fb985340a0d9d0eb7fea7403372cbdc55a089
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eventfd may be passed by libvfio-user to the remote process which
might remove the EFD_NONBLOCK flag, in which case we would block
indefinitely.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: If9826cd700b4a7b3458a0a8278a96322d99ac08e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
It doesn't make sense to have the size of the doorbells fixed and then
calculate the maximum number of queue pairs based on it, do it the other
way round. Also, add some sanity checks based on the spec.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I17e3509fb0a011128ca089ce78b7a296262e6f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some reset/disable paths are freeing the shadow doorbells without
switching the SQs back to BAR0. Fix this up, and add a small cleanup
when initializing the shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia5e5b91b7dc696a558eb0ad59cc554abced47cca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support SQs allocated to a poll group other than the controller's
main poll group, we need to make sure to poll those SQs when we wake up
and handle the controller interrupt. As they will be running in a
separate SPDK thread, we will arrange for all poll groups to wake up
when we receive an interrupt corresponding to a vfio-user message
arriving.
This can mean needless wakeups: we don't (yet) have a mechanism to only
wake up the poll groups that correspond to a particular SQ write.
Additionally, as we don't have any notion of a poll group per
controller, this ends up polling all SQs in the entire poll group, not
just the ones corresponding to the controller we were handling.
As this has potential performance issues in many cases, it defaults to
disabled.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I3d9f32625529455f8d55578ae9cd7b84265f67ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
max_aq_depth should be not smaller than 2 or greater
than 4096
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I205fbb4345cfdc41ebaf30c953da263fe9f0e9a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
max_queue_depth should be not smaller than 2 or greater
than 65536
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0f2a4b8df6eb1b140a11936fc6929f1285a7d717
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Refine the macro definition name about queue depth and
prepare for next patch.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I85bee2528ae4ab70292fc11aa62d05bae0c28a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14664
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When Link Time Optimization is enabled, compiler can sometimes produce
additional warnings saying that some variables may be uninitialized.
To supress the warning it is enough to add explicit initialization
of the variable causing the issue, in this case 'iovcnt = 0'.
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I080b20a6008643ae78c8e3a6c2d183193ef6c1bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
When data_local.num_async_events >
SPDK_NVMF_MIGR_MAX_PENDING_AERS, data_local.async_events
was already indexed by 256, and it was out of bounds.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Change-Id: I15cfdeb9bc165de0c73fbc9171b0ce6d8689c0aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14666
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In-capsule data length should be the same with the SGL data length.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I7eefecb8baebb76850a48689907aff27a8946f98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixed error handles which are violated with spec:
1. 'data length > MAXH2CDATA' is a fatal error.
2. 'ICDOFF != 0' should abort the IO.
Other errors which are not defined in spec:
1. invalid sgl type
2. In-capsule Data length > In-capsule Data size
Because this function runs before data part receiving, it is hard
to skip the following data segment if we want to handle some error
as non-fatal.
Currently, we have to handle all undefined errors as fatal errors.
I think after this release, we can change receving process. This will
be helpful for error handling. But this work is not small.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I8fc0d2d743505e49a93be19fd217e7ad6ca06622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During fuzzing vfio-user client and server are started from same
process causing deadlock. SO_PEERCRED return pid of process
connected to vfio endpoint.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I6fc2db5d58a459a30fec116a9de3c69d48acf75e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
in_capsule_data_size should not be larger than max_io_size.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I636724c888b9e5abc4cffac96bff24021e172498
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14618
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
hpda value should be in range of 0 to 31.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie1329c831af06ccc8943a562c3f6396b635be518
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This function is small and called only once.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie4b11668e42a8920b3a9a11aa8cb83512f32942c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
When emitting the JSON-RPC text for saving the
current configuration, add the listeners last.
This is usually the preferred order when
configuring a new subsystem - it is better to have
all of the namespaces and hosts added to the subsystem
before adding the listener to allow hosts to connect
to it. We support namespace hotplug but there's
no need to unnecessarily generate hotplug events
if we can avoid it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79e8a0a496eeb128efbb7e314ac835b6110d3cc8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14586
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
