In preparation for supporting additional claim types, create a claim
type that represents the current claim type. Everything that sticks to
the public APIs should continue to work as before.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0d02e4b3f4bbf4eb5a7391028aa31e999f9da915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In preparation for an updated claims API, refactor
bdev->internal.claim_module into a union that will eventually hold
different information based on the the type of claim.
Change-Id: I7ade6f03128bdb0f8375a95ae953cb63d6aa686d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This calls bdev_ok_to_examine() once per bdev_examine(). Prior to this
commit, bdev_ok_to_examine() may be called up to twice per bdev module.
The results returned by bdev_ok_to_examine() could be affected by:
1. g_bdev_opts.bdev_auto_examime changing
2. spdk_bdev_examine() being called on a particular bdev
3. An alias being added for an existing bdev
It's not clear that anything good comes from racing in conditions 1 and
3. In condition 2, spdk_bdev_examine() calls bdev_examine(), so any
required examine_config() and examine_disk() calls are still made, just
now with less of a race with the previous invocation of
spdk_examine_confg().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I496fc44fd74693837d6b449d7fa60f58f9dbf36f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
This closes races between concurrent spdk_bdev_module_claim_bdev()
and/or spdk_bdev_module_release_bdev() calls affecting the same bdev by
holding bdev->internal.spinlock while claiming and releasing a bdev. It
also closes a potential TOCTOU bug in that optimizing compilers probably
already eliminate in bdev_finish_unregister_bdevs_iter() and documents
that bdev->internal.claim_module is protected by
bdev->internal.spinlock.
This can be removed when the bdev_register_examine_thread deprecation
is removed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ib48552df065d5172139a61bbc00b391f36552c0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Since bdev_examine() can happen on any thread and it happens without any
other lock being held on the spdk_bdev_module, it is possible for
multiple threads to try to simultaneously increment
module->internal.action_in_progress. Decrements may also race.
This commit adds bdev_module->internal.spinlock and holds it while
modifying module->internal.action_in_progress.
This can be removed when the bdev_register_examine_thread deprecation
is removed.
Change-Id: I9c401eeb3c7c97c484e16fa9cfd82668b32e508b
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This introduces a deprecation for calling spdk_bdev_register() and
spdk_bdev_examine() on a thread other than the app thread. The
deprecation period starts in SPDK 23.01 and removal is expected in SPDK
23.05.
The intent of this deprecation is to ensure that bdev modules'
examine_config() and examine_disk() callbacks are only ever called on
the app thread. This largely a formalization of what has long happened
due to the RPC poller running on the first thread started by
spdk_app_start().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic9d7b87b6522be20357d2eab2d0c77cd5753452f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
However, when querying or resetting module specific statistics,
the generic bdev layer have to access it.
For this purpose, add functions pointers.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie86d0a4a406cec7e0f1e9a62de5982cd3d877eae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Define struct spdk_bdev_io_error_stat privately in lib/bdev/bdev.c.
Add a pointer to struct spdk_bdev_io_error_stat to struct
spdk_bdev_io_stat.
Allocate spdk_bdev_io_error_stat for bdev and RPC, but do not allocate
spdk_bdev_io_error_stat for I/O channel.
Dump the contents of spdk_bdev_io_error_stat only if its total is
non-zero.
As a result of these, only spdk_bdev_get_device_stat() can query
spdk_bdev_io_error_stat for the bdev_get_iostat RPC. This will be
acceptable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idae868afe65347a96529eedc3dcc692101de4a29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patches will make some of io_stat helper functions
public APIs. Then, for consistency, bdev_ + verb + _io_stat will
be better naming rules.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If36d4ed29253e87954c23c270e8414731d083f03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This is done in a couple of places, so it makes sense to extract it to a
separate function.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id34b2545d9912c2b7b65b1277711e9683db92658
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both max and min should be reset periodically. We can use the queue
depth sampling poller to reset these but the queue depth sampling poller
is optional. We extend the bdev_reset_iostat RPC to support mode to
reset all or only max/min fields.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9ce54892f6e808f6a82754b6930092f3a16d51ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add max/min_read/write/unmap_latency_ticks into the struct
spdk_bdev_io_stat.
When initializing or resetting the instance of the struct
spdk_bdev_io_stat, initialize max to 0 and min to UINT64_MAX.
Then update max if a new value is larger than the current max,
and update min if a new value is smaller than the current min.
For the bdev_get_iostat RPC, it prints max and prints min if min is not
UINT64_MAX or 0 if min is UINT64_MAX.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b30b3825c15e37e9f0cf20104b866186de788a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14825
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add a helper function bdev_reset_device_stat() to reset I/O statistics.
This funciton is used for the bdev_reset_iostat RPC.
We do not have any plan to use bdev_reset_device_stat() outside
lib/bdev. Hence, we do not add this as a public API.
Then, add a new RPC bdev_reset_iostat to reset I/O statistics of a
single bdev or all bdevs.
Resetting I/O statistics affects all consumers. Add a note to CHANGELOG
and doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I97af09107b5c3ad1f9c19bf3cbf027457c4fbae7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15350
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hold not only io_stat pointer but also num_blocks and blocklen in local
variables.
This will shorten and simplify bdev_io_update_io_stat(), and improve
readability and changeability.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I527b72538a169a1faafd32863ff539306a8763a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The following patches will add max/min latencies and more optional
counters. This factorization will improve the readability.
In addition to factorization, add spdk_likely to check if completed
successfully or not.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I57581ece2b73d486aa138f8d26a5afaf6953a322
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15480
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For consistency, rename a JSON dump function by bdev_io_stat_dump_json()
and change the parameter order.
Other public APIs and function pointers in the generic bdev layer,
spdk_bdev_dump_info_json(), spdk_bdev_fn_table::dump_info_json, and
spdk_bdev_fn_table::write_config_json have a json_write_ctx pointer
as the last parameter. For consistency, swap a statistics pointer and
a json_write_ctx pointer.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6f3bb6f2752f7da856d4fe66c0f1f8a2eedc176b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Move a JSON dump functionbdev_get_iostat_dump() for I/O statistics
into lib/bdev/bdev.c.
The next patch will rename the function and change the parameter order.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6a90d15fcbaa2e2a250167754135623bc9e7f362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add helper functions, bdev_io_stat_alloc(), bdev_io_stat_free(),
and bdev_io_stat_get() for struct spdk_bdev_io_stat.
Then replace a bdev_io_stat_add() call by bdev_io_stat_get() at
spdk_bdev_get_device_stat() because the saved data is queried first.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9547757421a1de1b8cb44e0f8ade4b5c2bcad4e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15443
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1979a9d867859d5cb5d05717bfcc677f07fa03f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I50b57f792b451cf748ea8eb0611fe65d693d5a14
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically. For the
per_channel mode, we can share the bdev_ctx->stat because
spdk_bdev_get_io_stat() always overwrites stat.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I51cd550f52dc3b7d0f3f825fd48bcbeb3ecdcff2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace comments saying that particular locks must be held with
assertions that enforce that those locks are held. Remove the comments
so that there is no chance of comments and code getting out of sync in
the future.
This also fixes a caller of bdev_close() that did not hold a required
lock.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I3a540f1ad9b9826f925c523986334aa8fcd302f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is unsafe, because we touch need_buf_* queues, which aren't
thread-safe. Also, documented this requirement in
spdk_bdev_io_get_buf()'s description.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iabc141e051c543fdd51f079ae212f69e980d8148
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Print out the specific values in this SPDK_ERRLOG,
this can help to find where the error is.
Change-Id: I2a38aa2d4270e0bbf554ddb348a73d40967d1b16
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
SPDK threads generally run on dedicated cores and locks should be rarely
contended. Thus, putting a thread to sleep while waiting on a mutex does
not free up CPU cycles for other pthreads or processes. Even when
running in interrupt mode, lock contention should be low enough that
spinlocks are a net win by avoiding context switches.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6e2e78b2835bbadb56bbec34918d998d75280dfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`BDEV_IO_NUM_CHILD_IOV` and `BDEV_RESET_IO_DRAIN_RECOMMENDED_VALUE`
are public macro definitions without `SPDK_` prefix, so we add the
`SPDK_` prefix to them.
Change-Id: I4be86459f0b6ba3a4636a2c8130b2f12757ea2da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15425
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The bdev hot remove might be an async process. The bdev_open will
return an error during the hot remove process. If someone invoke the
bdev_get_bdevs API when a bdev is in the middle of a hot remove
process, the spdk_for_each_bdev function will stop its loop when a
bdev_open return an error. Thus the bdev_get_bdevs will only return
partual bdevs or even return an empty list if the hot remove bdev is
the first bdev in the loop. When spdk_for_each_bdev and
spdk_for_each_bdev_leaf loop for each bdevs, if a bdev returns an
error, we skip that bdev instead of stop the whole loop.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ib35b817e23e47569fc5762a883b4ff8e322ae173
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Remove automatic generation of UUIDs for bdevs
that do not provide this value themselves.
This is to clarify whether this field can be
depended upon.
Modified match files to reflect change in UUID
generation.
Disabled nullglob shell option, as it deletes
empty arrays during word splitting. Bdevs with no
aliases would instead of "[]", have nullpointer
printed, which makes resulting JSON invalid.
Part of enhancement proposed in #2516.
Change-Id: Ic1d5f8f8d001ae1a219e876aef2a19b1ff0b2f2c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Add helper functions, bdev_iostat_ctx_alloc() and bdev_iostat_ctx_free()
for the bdev_get_iostat RPC.
The following patches will allocate spdk_bdev_io_stat dynamically for
bdev_get_iostat_ctx.
This is a preparation for that.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib71d6fb92d8134d2282507e62874f19045b630b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdev_get_iostat RPC uses two types of contexts, one to manage the
progress of the bdev_get_iostat RPC and another to call
spdk_bdev_get_device_stat().
However, this was hard to find from the source code.
To make us easier to find this, rename the former by rpc_ctx and the
latter by bdev_ctx. Then rename related functions and variables accordingly.
Furthermore, relocate request and decoder declaration to improve
readability.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3472c87fe4ec1f5981a49ef79148534fbb1d46c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RPC parameters and decoders for the bdev_get_iostat RPC are used only
by rpc_bdev_get_iostat(). Locating RPC parameters and decoders close to
rpc_bdev_get_iostat() clarifies it. Furthermore, this will simplify code
review for the next patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b1b428e3eb3bb4422e490c5f4324f0e40f9710f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For I/Os controlled by QoS, TRACE_BDEV_IO_DONE is collected after
redirecting to the original thread. Hence, TRACE_BDEV_IO_START should
be collected on the original thread too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I15411be823450ee5ddaa7582509a7aa068476fc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add API spdk_bdev_io_get_submit_tsc to get submit tsc of a bdev I/O,
which can be used in bdev modules to avoid calling expensive
spdk_get_ticks().
Change-Id: Ifbcecb1bc663344997c5e73b72a1dfb5d0422946
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdev*_with_md APIs now allow to pass NULL md
pointer, so calling this function without checking
for metadata simplifies code
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I364a646630bd36120231ea87a41fea05df51befb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In the following patches, we will add a feature to inject data
corruption to the error bdev module. For read I/O, we will have
to inject data corruption at completion. However, if we use
spdk_bdev_part_submit_request(), it will not be possible because we
cannot add any custom operation into the completion callback.
To fix the issue, modify spdk_+bdev_part_submit_request() and
rename it to spdk_bdev_part_submit_request_ext().
Fortunately, we can use stored_user_cb in struct spdk_bdev_io.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I46d3c40ea88a3fedd8a8fef6b68ee417c814a7a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Copy operation is defined by source and destination LBAs and LBA count
to copy. For destiantion LBA and LBA count we reuse exiting fields
`offset_blocks` and `num_blocks` in `struct spdk_bdev_io`. For source
LBA new field `src_offset_blocks` was added.
`spdk_bdev_get_max_copy()` function can be used to retrieve maximum
possible unsplit copy size. Zero values means unlimited. It is allowed
to submit larger copy size but it will be split into several bdev IOs.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I2ad56294b6c062595c026ffcf9b435f0100d3d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Add a new parameter "-c" to display the per channel IO statistics
for required Bdev
./scripts/rpc.py bdev_get_iostat -b Malloc0 -h
usage: rpc.py [options] bdev_get_iostat [-h] [-b NAME] [-c]
optional arguments:
-h, --help show this help message and exit
-b NAME, --name NAME Name of the Blockdev. Example: Nvme0n1
-c, --per-channel Display per channel IO stats for specified device
This could give more intuitive information on each channel's processing
of the IOs with the associated thread on the same Bdev.
Please also be aware that the IO statistics are collected from SPDK
thread's related channel's information. So that it is more relating
to the SPDK thread. And in the dynamic scheduling case, different
SPDK thread could be running on the same Core.
In this case, any seperate channel's IO statistics are returned to
the RPC call and if needed, further parse of the data is needed to
get the per Core information although usually there is one thread
per Core.
On the other hand, user could run the framework_get_reactors RPC
method to get the relationship of the thread and CPU Cores so as
to get the precise information of IO runnings on each thread and
each Core for the same Bdev.
Change-Id: I39d6a2c9faa868e3c1d7fd0fb6e7c020df982585
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
And also related function pointers and APIs:
spdk_bdev_for_each_channel_msg;
spdk_bdev_for_each_channel_done;
spdk_bdev_for_each_channel_continue;
Change-Id: I52f0f6f27717d53c238faf2f998810c9c5ee45d4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The following patches will allow the caller to specify a custom
completion callback to spdk_bdev_part_submit_request(). To do it
easily, consolidate completions of all I/O types into
bdev_part_complete_io().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I083695189daa7e5271787c50947e428d01a83677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15001
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
