Use RPC instead
Change-Id: Iaab3d989b7efa687dd8aa1f9fea3ba720499b658
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Json configuration can be loaded by adding parameter --json-path=PATH.
Also spdk_vhost_run can be launched without initial config file.
New JSON RPC call "load_subsystem_config" for loading subsystem
config.
Change-Id: I4e71da99ea574484cba7e0d29b87cbc0b41e5ce6
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411460
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This brings DPDK 18.05 support and introduces
dynamic hugepage memory allocation.
The following is now possible:
./spdk_tgt -s 32
rpc.py construct_malloc_bdev 128 512
or even:
./spdk_tgt -s 0
Note that if no -s param is given, DPDK will still
allocate all available hugepage memory.
This has been tested with DPDK 18.05-rc6.
Fixes#281
Change-Id: Ic9521484c2871eb5b2a56445f1177f305b147707
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test has been causing intermittent failures for some time:
nvme_rdma.c: 221:nvme_rdma_get_event: *ERROR*: Expected
RDMA_CM_EVENT_ESTABLISHED but received RDMA_CM_EVENT_UNREACHABLE (7)
from CM event channel (status = -110)
Disable it until we find a reliable way to avoid this issue.
Change-Id: Id8f767bfa26a6a14f94cf4f7ff69b3ac0f11d88d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410489
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The upstream project has been renamed to PMDK.
Change-Id: I9bb0200d2cbf1e94c464017587b7bf0847ac0bfa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix in scripts that use BASE_DIR variable
that is redefined in common.sh.
Change-Id: Ie4ad9fb85f0042d274738f19b0d4696b2056efda
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/411833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abort is not currently implemented, since spdk_nvmf_qpair_get_request()
always returns NULL, but this will allow it to be implemented in a
thread-safe way.
Change-Id: I6dfd1ee50848deed0f4a2667aad5a811d8dd4ca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icc8aeb642d31b5c031c90855b33913bf886cefe8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I26e9d1e86c93f0b96b5bff7c9af5a453199c3e29
Reviewed-on: https://review.gerrithub.io/408138
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib999d3f082f5d632cb1aaf089504d0cd48e77539
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408696
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes a number of things much simpler and eliminates
the need for upcoming proposed reset handling.
Change-Id: I23a6badd0873f6dcf38ba1e55bf18d846c2843df
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407357
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This package has been renamed to reflect the new upstream project name.
Change-Id: I71f6bfaf36fb1fe7dc4cb050e3d7faad1097994e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411781
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I923c808affabdb97a5237b76f9f5534d6fb41601
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/411048
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is to support older versions of pmap (specifically procps v 3.2.8
which ships with centOS 6) which don't support the -p and -X options.
Change-Id: Ic8d4b94985c165e8bf224204af48b5d856aa2403
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/411755
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change print statement syntax and subprocess calls as well as some list
comprehension syntax.
Change-Id: Iebdea5f06be963e7f04af4df352aacef9b31a8eb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a simple example for spdk_vhost_nvme_controller_construct
and spdk_vhost_nvme_dev_construct functions.
Change-Id: I38415a7f4b28faf071a74e9b87d141da78e43368
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Missed to add object_begin to dump for portal group.
key of lun in luns is different between dump and load.
Change-Id: I16b95596478e0e4430c7186aa077bd107e375a93
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Python3 does not support the "except Exception, name:" syntax used in
test_cases.py
Change-Id: Ie90888d715c97c94c7686b797d955df2ead61915
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410937
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It doesn't represent an io_channel, so lets
rename it to something less confusing.
Change-Id: I730eb0ff0eb7737a59c190812a25b327ccd8fc14
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409998
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit adds a simple hello world example that writes the string
"Hello World!" to a bdev. The example can be used on a block device
such as Malloc or virtual bdev such as the passthru vbdev. The
sample bdev.conf configuration file includes a configuration for 2
malloc bdevs and one passthru bdev on top of Malloc0.
Change-Id: I1414183e3ddfac988ef61f24b8271653ac57e7c1
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/407220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev layer has been recently refactored to share
internal module channels for *all* bdevs of the
same bdev module. This makes us return ENOMEM for I/O
of one bdev if another bdev of the same module (nvme, split, etc)
is entirely saturated. This is not the behavior we want,
as these bdevs may not have anything in common.
This `issue` has been fixed just now, but to prevent
it coming back again lets add a unit test for it.
This test case creates two bdevs using two separate
io_devices and checks if ENOMEM handling is somehow common
for these two. It must not be.
Change-Id: Ic32ef4b4347b8856d4b9f91107e6f188ad67978e
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409997
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
iSCSI hotremove is broken. It relies on C undefined
behavior. Some bdev_io may be put after their bdev_channel
has been put (freed) and spdk_bdev_put_io may be reading
freed bdev_channel memory.
iSCSI tasks targetting hotremoved devices are finished
immediately. That's usually fine, but these tasks might
be subtasks of an r2t chain. Once subtasks are freed, their
parent task may be eventually freed as well. If the parent
has finished before the hotremoval, its bdev_io has been
assigned, so freeing the task will put that bdev_io and that's
where undefined behavior hits.
There's an ongoing work towards deferring iSCSI hotremove
if r2t tasks are present, so this test should be reenabled
once that's done.
Change-Id: I7fa741b8749d542bcabb211a0969da5d7742eda3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The DEFINE_STUB macro doesn't actually need a trailing semicolon, but
adding one avoids a new astyle 3.1 bug that otherwise causes these stubs
to get reformatted incorrectly.
Change-Id: Idc281d08ba8e1ca0593442b6e4d25add25bea2d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id87ace1d8f875f294252874c644572b0993ffc94
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Future changes will rely on the ability to atomically
swap this data structure out.
Change-Id: I77b93252df63155692271b5665cc040cb83a33d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There needed to ba a couple of changes made with respect to integer
rounding and handling raw binary strings from subprocess calls that were
handled by default in the last version.
Change-Id: Ie0e664a577e0b0fb690058842c5dbe95b2794a26
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409776
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Thin provisioned blobs mark unallocated clusters with
cluster ID 0. During recovery from a dirty shutdown,
we must not try to claim cluster 0 - we should ignore
them instead.
Fixes issue #291.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0dd42416f5de8d9972073bf6ed44eb8bc655415
Reviewed-on: https://review.gerrithub.io/410065
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I02b857cdbeec936c7e4502fe3e72f9156b8abdd8
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/409799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for target node. These are added
to tgt_node.c Text config dump is moved to tgt_node.c too.
All accesses to g_spdk_iscsi.target_head are consolidated into
tgt_node.c to extract target_head from g_spdk_iscsi.
Change-Id: Ibdf57c6ec9457d762c5640483b5810c9a74604ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The contigmem driver is built with dpdk and frequently updated. We
should copy this driver each time we build dpdk in order to maintain
support for FreeBSD
kldload checks the sysctl variable kern.module_path when deciding which
modules to load. Since the values stored in this variable are not
determined by our program, I chose to copy the module to both common
directories for kernel modules in FreeBSD.
Change-Id: I2d439a9cbac5bebb79e6ee48bec47409bb215be9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This keeps original behavior, allowing scheduler to move
the thread if no core mask was specified - something the
in-tree test scripts do now. This original behavior made it
easier to just start bdev_svc as a dumb background process to
speed up nvme test programs running as secondary processes.
But if the user wants to specify a core mask to use bdev_svc
for other purposes, we shouldn't unaffinitize the thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I169a71d71c18ca7d6d1660e8401e84fc19a8cc9b
Reviewed-on: https://review.gerrithub.io/409774
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These won't cover race conditions across threads, but
at least we have something to test the behavior.
Change-Id: I8e620d2076fe7a3d95df668fda4bee49b6d0afa7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409343
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nothing uses this anymore - the whole directory was renamed except for
this file.
Change-Id: If2568564371a21772d7daa24d09bea3eecb6564a
Fixes: 0488fd84b8 ("vhost_test: update vhost ext4test for spdk vhost")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409246
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This driver was added to allow benchmarking of the SPDK user-mode I/OAT
driver vs. the Linux kernel I/OAT driver; however, this isn't a
particularly interesting test, since the kernel I/OAT driver is totally
inaccessible from user-mode code (it is only exposed to the in-kernel
dmaengine framework).
Maintaining an out-of-tree kernel driver for the sole purpose of
benchmarking is out of scope for the SPDK project, so remove the kperf
driver and test harness.
This can always be retrieved from git history if needed later.
Change-Id: I0ced6e8a88de2cf09a6c0970dfef0ae8f357f193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Network namespaces are used to assure that kernel
is not routing packets within host stack,
but they go through veth interfaces.
This patch serves as a base for future VPP test changes,
where namespaces are used as well.
Change-Id: Ic7b82b0a0837bca2e16774fde244348a691fe056
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It has been removed long ago.
Also enabled "log" traces for log_ut, so that
SPDK_LOG_LOG messages are now displayed.
Fixes#284
Change-Id: I815f2a3301524540201adf060e3114143c258c4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408945
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I182e3fd47c28468184d1a60dec3d114df2d5e5ae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408763
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the first step toward fixing the behavior of the lvol bdev
module so that it handles spdk_bdev_unregister() correctly.
Currently, when an lvol bdev is unregistered, this causes the associated
lvol to be deleted; this isn't the desired behavior, since
spdk_bdev_unregister() is just meant to drop the currently-exposed bdev,
as in a hot-unplug event, not destroy the backing storage.
The current implementation of the new destroy_lvol_bdev method still
calls into the exsting (broken) spdk_bdev_unregister() path, but this at
least lets us fix the existing delete_bdev RPC callers that really
intended to destroy the lvol.
The next step is to make vbdev_lvol_destroy() call spdk_lvol_destroy()
instead of unregistering the bdev, which will require cleanup in the
generic lvol layer to remove the close_only flag.
Change-Id: Ic4cb51305d31f6d7366a82ba7bf7b19ebbcd3e9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408084
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU vhost-user-blk-pci host driver will not negotiate
VIRTIO_BLK_F_RO feature bit by default, users must append
`config-ro=true` to enable it if the backend device can
support read only feature.
Fix the issue #254.
Change-Id: I17dcc1b80bde094dd4873221b681d0c4049abb39
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408266
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
DPDK will deprecate the old API soon.
Change-Id: I0522d47d9cc0b80fb0e2ceb9cc47c45ff51a5077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The QoS parameters are only used from the QoS thread,
so gather them together in a struct pointed to by the
bdev.
Change-Id: I91005f1d00205217a189d1ebacdb55782814f247
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rocksdb has been frequently failing in nightly tests:
https://ci.spdk.io/spdk/nightly_status.html
Change-Id: I53d812dfb6146bd973fff3c40fe3490c0fba9fc8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/406975
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I07dac4bbf06a85659ae5d31e3f8d037d87825694
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408483
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--------------+------------------+-------------------------------------------
Name | Type | Description
--------------+------------------+-------------------------------------------
snapshot | boolean | true if lvol is a snapshot
clone | boolean | true if lvol is a clone
base_snapshot | string | name of base snapshot if lvol is a clone
clones | array of strings | array of clones names created from snapshot
--------------+------------------+--------------------------------------------
Change-Id: I5df06798f3bd34bba89743aba896d129a0915d00
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/404638
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f9e54774951e691378e0659dcf15cecacd77e2c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405026
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit provides an API to obtain an information about
snapshot and clone relations.
The main objective is:
1) Determinate if we can delete snapshot (if have some created
clones),
2) Provide an information about parent/children nodes to the upper
layer (e.g. lvol)
Realization:
1) Structure parent-children is stored in the blob store object
and updated on:
a) blob store load,
b) blob create/delete,
2) Full information about parent-children is provided via new API:
spdk_blob_get_parent() and spdk_blob_get_children(),
Note:
While we don't store an information about these relations in the
blob store, we need to open all blobs on blob store load to create
it. It should be considered that it have an impact on the blobstore
loading performance.
Change-Id: Ie0237fa5b93af01aa73d1f68ac1694e653fb75e5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Recent patches to the vhost initiator tests have resulted in
some fairly regular test pool failures (at least 9 in the last
24 hours). Revert while this is debugged further.
This reverts commit 0b34e88c2d.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I427d46b10d30bf21b3b29bebc6583403e031f2fb
Reviewed-on: https://review.gerrithub.io/408389
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent patches to the vhost initiator tests have resulted in
some fairly regular test pool failures (at least 9 in the last
24 hours). Revert while this is debugged further.
This reverts commit 4988e48294.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I427d46b10d30bf21b3b29bebc6583403e031f2fc
Reviewed-on: https://review.gerrithub.io/408388
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an internal NVMe driver function, so we don't need to allow for
the case where trid is NULL. All callers already passed an address of a
local variable except the unit tests, which can be trivially fixed.
Fixes a static analyzer warning about trid being dereferenced in
nvme_transport_ctrlr_construct() before being checked for NULL in the
caller.
Change-Id: I2bfeb5c92a302093b7c7f2949adcd18baa11855a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408395
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test was disabled because older version of fio was crashing
during virtio-pci tests. This issue was fixed by copying fio
from host to guest vm.
Change-Id: I2e60d275372f0ed3baf3da7e3a5c87c7f2e771a6
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/406950
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_io_device_register() doesn't have a return value, but we can at
least catch trivial mistakes like neglecting to pass a valid io_device
or create/delete callback in debug builds.
One invalid unit test case that passed NULL for all parameters is
removed, since there's no way to make that work without adding a return
value instead of asserts.
Change-Id: I3dd4c850bdb14957d2dc03209ea9ea44bbe4e616
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When testing whether QoS is enabled, the code previously
checked mutable values in the bdev itself. Instead, it needs
to check the flag in the channel.
Right now, QoS can only be configured statically when the
bdev is created. This means that no channels will exist
prior to QoS being turned on, which simplifies setting
the per-channel flag (only need to set it when a channel
is created).
Change-Id: I59e56c64c18c262cc2a7f71a6dde8329edb35db7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407354
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow a bit of internal refactoring to occur
without breaking the unit test.
Change-Id: Id7da6b14e9cd4cab5fc4dc004b5858dbbb34bc3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407366
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To be run only manually as test pool does not
have DUTs connected in pairs.
Change-Id: If3ab3e671156b583adb35d5b23ee90003a6de732
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/400988
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Icb98e4628962591da32d169853d0ff14400e1e50
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/406922
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes issue where user creates 2 lvols
with the same name simultaneously. New solution
builds list of names of lvols that are currently
being created and when new request comes it compares
name against existing lvols and lvols that are in the
process of creation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I31b59ee13b5b9bae531866925dd409b143f08ad4
Reviewed-on: https://review.gerrithub.io/407408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Multi-process tests should work fine using the DPDK
-base-virtaddr parameter. But we run tests with ASAN
enabled and ASAN instrumentation results in mmap
address hints getting ignored.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I089d31726c7b8f5ed0ccdc2deb19acc5431260f1
Reviewed-on: https://review.gerrithub.io/407843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be a debugging aid to root cause some intermittent
test failures seen due to ASLR in the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23a856ab53bdf378b5da51f1cb8d9f2cdf6efce1
Reviewed-on: https://review.gerrithub.io/407842
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In Fedora 27 the nvme program returns before the kernel has loaded the
namespces associated with the subsystem. This patch ensures that those
namespaces can be enumerated by the kernel before we run any tests on
them.
Change-Id: I77505ed5cd5b1118a841650851fa5ecaf76f5619
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new optional bdev module interface function, init_complete, to notify bdev modules
when the bdev subsystem initialization is complete. Useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
Change-Id: I0997fb5749d430f2fd3a40172ec8a1d5caa96964
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/407222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: I73adb5d3eea5c95ea705c67de4fc967e926eb6ce
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also move snapshot and clone test plan into implementation.
Change-Id: Ifa1f2da651305747ae24c50921deebd0266c5888
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/392371
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: Iabd65cc703f56e8bc561344893aaeb6dc5f25fb8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
iproute2 tools are more up to date and offer broader capabilites,
thus should be used whenever possible.
This change was prompted by "ifconfig -s" cutting interface names,
not allowing for ones that are longer than 8 letters.
Change-Id: I38462f8498207aa0b0d24d1c0b1769c1ba59f0ea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407395
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When combining two lists with of rmda_nics and all_nics,
last entry of rdma_nic and first from all_nics were
combined into one.
Change-Id: I809bdb6c8cc4dcc3aec2c0964598c35fccbba8ae
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost_driver_start() can start a new posix thread
that polls for incoming socket connections and calls
backend->start/stop_device. Soon we're going to put
more work on this thread, so we need to make sure it
doesn't collide with SPDK reactors.
This patch also fixes vdev memory leaks in case the
rte_vhost_driver_start() fails.
Change-Id: I16fdff228176a245c478251b39aa244a49bd124b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/406959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2cc6c494bacbeec1ba725b4b3d78a1f4a2ed39d1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RocksDB plugin no longer strips the leading slash
from filenames - so update the fuse plugin accordingly.
If and when BlobFS supports a real directory structure,
we'll need to avoid the leading slashes, but for now let's
just make the fuse plugin usable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5609dd4d5fd3db85f266963172f35ac004869d66
Reviewed-on: https://review.gerrithub.io/407231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable test functions for lvol resize.
Change-Id: Ia4583af211350054797d2d8441083e582e6e2ab7
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/395043
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change vbdev_lvol_resize() char name argument
to struct spdk_lvol lvol.
Add spdk_bdev_notify_blockcnt_change() after
succesfull spdk_lvol_resize().
Some code clean up and refactoring.
Change-Id: Idaa5bd4707e2479dfee50459a9844319b8c35d3a
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/394521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I28fa033378649f9cf02bf216698b9d2058f77c9d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/406883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of silently truncating overly-long SCSI dev names, add an
explicit check and return an error if the name is too long.
Since we now calculate the length of name up front, this also allows
simplification of the copy into dev->name.
This also ensures that dev->name will always be zero-terminated, so we
can simplify the strnlen() in spdk_bdev_scsi_pad_scsi_name() to a
strlen() and remove the invalid unit test case for padding names longer
than SPDK_SCSI_DEV_MAX_NAME.
Change-Id: I54de00bac062a142a10c41cfa2aec19d7969dff0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
