The transport API now allows for multiple transport
objects, so allocate them on demand instead of using
a single global.
Change-Id: I5dd35f287fe7312e6185c75ae75e2488ec8cc78e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371990
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this is a name change of controller to poll_group
in the transport layer. Over time, the poll_group will
become a more general concept than a controller, allowing
for qpairs to be spread across cores.
Change-Id: Ia92a2934541ad336f462f73175d53aaaf021f67b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371775
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10857de922d5a17131910aca92c73995ea6ab8f6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a bdev-based controller is partially set up but then needs to be torn
down due to an invalid configuration, the nvmf_bdev_ctrlr_detach()
function could try to put a NULL spdk_io_channel.
Add checks to avoid releasing resources that weren't allocated yet.
Change-Id: I779c80f4dc654af3c4b0a49d8d216e13ab5f8333
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373390
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are now three simple functions on the transport:
listen(transport, trid)
stop_listen(transport, trid)
accept(transport)
This makes the code quite a bit simpler.
Change-Id: I550343a084b5c095240703952c8c07ae535b5c16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of scattering direct calls to the function
callbacks throughout the code, add some wrappers.
This will make some later refactoring marginally
easier.
Change-Id: If735089967e3ce828dcff68f2430e7810bf2f123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371749
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to optionally specify the address family for
construct_nvmf_subsystem (default is IPv4).
Note that the RDMA transport still only supports IPv4 because of the way
it binds to the listen address; this will be fixed in a separate patch.
Change-Id: I534ed75f6f81e53559d1bebcd2f34f1a2b210a97
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add handling of the Abort command in virtual subsystems. This doesn't
actually abort any requests - the spdk_nvmf_request_abort()
implementation just fails all abort requests - but at least this gives
us a place to hook up actual abort handling later.
Change-Id: Iafaa393c6f9e7f404af91747cbd81c64ab4810bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365905
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I338f47000a1c898309a7421fe52f148bae9f2e6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364116
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I61b6579e8698d16e5a8ab74d304af9ea53f9dce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also move the validation of serial number length into the library.
Change-Id: Ibc9384fc1fccb87bd15b75da7f3942570900bd96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic1b7b1b6497dbae5ceda9bb91f9d4d2037b7243f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_exists(nqn) is exactly equivalent to
spdk_nvmf_find_subsystem(nqn) != NULL.
Change-Id: Icafa43166c99d1364b49cef30a5ade4b6625bcd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I02a44c3790830b3918dca418c6bb85e82ddac273
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This structure is not part of the public API and shouldn't be in
spdk/nvmf.h.
Change-Id: I29fbb269d3ab77cd9fa9908726abc7c7a4c6d8c1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363296
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace with it with check the returned req
via spdk_unlikely macro
Change-Id: I1202b3955af9a68496d8ced7cf66c20cf26f7fff
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Attempting to add a listen address for an unavailable transport will
fail with a better error message.
Change-Id: If4cf5b66c16dadcb6e0f0b28cea4aa510ba6a9fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than failing silently, let the user know why the listen address
failed.
Change-Id: I41c2a51c6071ee739b282a1a39198a2887a73c4d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify code that previously needed to check for subsystem type by
factoring out the discovery controller operations into a new ops
instance.
Change-Id: Id87b498e4623451993fe779ffb765be5a6743fd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No functional change, just rearranging code.
Change-Id: I28328dfefd7de269d326834c484f2c2fca4e6c1f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When data needs to be transferred from the controller
to the host, do a single ibv_post_send containing
both the data and the completion.
Change-Id: I072c545b31593e0e324c97ed700b42c6a4c358e1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This call had been reduced to a simple wrapper
around the ibv call. Delete it.
Change-Id: I42926d123db262617119a9cff77bc0d0eb1e8f31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These functions were only called from one place and
their functionality has been reduced to a wrapper
around the underlying ibv call. Remove them.
Change-Id: I65182012dbe6393b9d57f4191fd327bcd025a6c8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This keeps all SGL handling in the prep_data function.
Change-Id: I9bfeed3748c1b329288350b85aa87bd604cfce4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Now that all of the SGL mappings are static,
this function just called ibv_post_recv. Delete
the function and call ibv_post_recv directly.
Change-Id: I45216170a157709249b08c4cb0ebdb1adb906049
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For an NVMe read, send the completion immediately
following the RDMA WRITE, without waiting for
the acknowledgement. RDMA is strictly ordered,
so the WRITE will arrive before the completion.
Change-Id: I7e4e01d7a02c2130b655ef90f5fdaec992d9361a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Except for a CONNECT capsule, always use the central data
pool for RDMA READ/WRITE operations. The in-capsule
data buffer is associated with the receive operation
while the pool data buffers are associated with the
completion, and using the in-capsule data buffer
causes a lifetime mismatch.
Change-Id: Ieb45e521d78daa7c706078a3dd5c5a146f8dc1d6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
After commit b654e9b, this is no longer required.
Change-Id: I0cf1a7059d7fba0303aca5ad5a15afe3890b4172
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The RDMA protocol this module uses is strictly ordered,
which means messages are delivered in exactly the order
they are sent. However, we have detected a number of
cases where the acknowledgements for those messages
arrive out of order. This patch attempts to handle
that case.
Separate the data required to post a recv from the
data required to send a response. If a recv arrives
when no response object is available, queue the
recv.
Change-Id: I2d6f2f8636b820d0c746505e5a5e3d3442ce5ba4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This clarifies the relation between the values assigned to sg_list and
num_sge (no functional change).
Change-Id: I8e81d47dd97a033b17cd3b813b06e4887127146c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The mappings are all static, so it isn't interesting
to print them out on each I/O.
Change-Id: I85301b4518d4523a7c031f6ca9ff678d91428504
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows pipelining of READ/WRITE with completion.
Change-Id: Ib3ab5bffb8e3e5de8cbae7a3b2fff7d9f6646d2d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This allows static initialization of the scatter
gather list as well as future optimizations
around pipelining commands with data.
Change-Id: I8af8f3e3425610bc720677c9bc84f163cfb6278a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The first version of the Linux kernel NVMe-oF initiator had
a bug when reporting queue size where it was off by 1. We
had a workaround to deal with this. Now that the kernel
has been fixed, remove the workaround.
Change-Id: I0ad4a5c6db68cfa9683ab93e6f5210772c713b55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The sq_head handling is already done in
spdk_nvmf_rdma_request_send_completion, so do not need to
do again.
Change-Id: I527ff8adfcbdf43ac79794cb5c7777c0e8ef6973
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Previously, if the maximum number of virtual namespaces had already been
reached, adding a bdev to a subsystem would claim it without actually
adding it to the ns_list array.
Change-Id: Iab68ad1a75748c0e88232240185695aac08d71d2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is no longer used now that AER handling holds the request until it is
triggerred.
Change-Id: I71a75e86f82bc06f677cf26defa701e60b9aa1bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
After checking the code, aerl in our session is 0,
so there will be only 1 AER. So currently,
we will only handle 1 AER case.
When the AER event is triggered by real NVMe device owned
by the subsystem, it notifies all sessions belonging to
the subsystem.
Change-Id: Ia80fb0f03e893c20d8dd14afbed8db10db38301c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The wr_id should never be NULL - it will always correspond to a request
we previously posted. Convert the check to an assert() so we notice if
this ever happens (which would indicate a programming error somewhere
else).
While we're here, add a more robust check to make sure the request is
actually in the correct array of requests for the connection being
polled (also in an assert, since this should never fail in normal
execution).
Change-Id: I855763d7d827fb8cf00a775c7bc2ccb579db8d0f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Kernel nvmf host always tries to connect nvmf target
when we does not issue nvme disconnect command. Thus,
we face rdma_create_qp issue, the reason is that we call
rdma_listen too early, and the event retrieved from
rdma_cm_get_event is too late.
And this patch solves this issue.
Change-Id: I153a8aea7420a86a236301dad9bd54af97f60865
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Calling spdk_nvmf_request_complete to complete spdk_nvmf_request
causes some fields in completion queue entry not set correctly.
Calling spdk_nvmf_request_complete fixes the problem.
Whether a nvme command having data transfer cannot be completely
determined by command opcode. For set features command, some features
don't require data transfer.
Change spdk_nvmf_request_prep_data to fix this issue.
Reason: the 4 fields of struct ibv_recv_wr is already
set in the following 4 lines.
Change-Id: I97437ee2e4c6e944154813bb48b1740b182220df
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The direct and virtual mode code is identical; move it to session.c like
the other virtualized get/set features.
Change-Id: I0a0e2dd795197c142ad5d9d0e4ddedb2aa5c8c2a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Even for direct mode, each session should use its own
async event configuration like virtual mode instead of
passthrough.
Change-Id: I9c1175f3677c672c0cad684341b8a46a575d753e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The phenoemon is that we can not shutdown the nvmf tgt.
The solution is that we need to adjust the shutting down orders of
nvmf tgt subsystem and rdma trasport layer.
Change-Id: Ie39657370b1574960e0ee7cf604cc5872db0bed3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These strings are not modified by the functions they are passed to, so
they can be const char *.
Change-Id: I11532f232990a305d706c14aac1b0f8f93b8f576
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid accessing the internals of the bdev_io from outside of the bdev
library.
Change-Id: I01dfc38b2520353ad42bcd8587b90f197eadf101
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When we do frequent same subsystem add/delete,
we will face the adding issue. For example,
1 Add subsystem A
2 Delete subsystem A
3 Add subsystem A (Fail in this step).
The reason is that we did not correctly free
the listener resources of subsystems, and this patch
can solve this issue.
Change-Id: I6765a306a3f10c9a0f38c95dbba12e2a4073e705
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
64k sessions over the lifetime of a single target is something
that really could happen, so handle this case.
Change-Id: Iaed92b9ff6cd078fcd7c1efe88cf0c860c77c4ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is not actually optional - it contains required
information for setting up the connection.
Change-Id: I21136de12794a0f4f5c14c5d3e2e3f2306c5c102
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't used anywhere yet, but it will be for
NVMe-oF 1.1.
Change-Id: Ieae0688e6ad5b7a44568e5760382b5716b02e6f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The code doesn't actually use this property of cntlid
for anything yet, but we will need it later.
Change-Id: I5fd514d75b903cc8769e7b9f196a4624e9cf876c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This prevents the need for bdev users and modules to manipulate the
internal bdev_io error.nvme fields.
For now, all non-NVMe error types are treated as a generic device error,
but translation from SCSI to NVMe could be added in the future.
Change-Id: I4e831b26a2f41bf2f405c7576d5019bb898d4d1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Claim the block devices used by iSCSI LUNs and NVMe-oF subsystems so
they can't accidentally be reused.
This will also be used by virtual block devices to allow layering of
bdevs.
Change-Id: I5384923fbf24f13f4ce720a797c5a628053d49f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Generate the full discovery log page in a memory buffer, then copy just
the requested part of it for each Get Log Page call.
Change-Id: I12730c59c0395cdac57aaab96337e938952e3011
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Note that the offset is not actually used yet, just sanity checked.
Change-Id: I9464dc934e94e3d38ac0d474fce876552650f92b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows hosts to determine when the discovery log page has changed
when reading it across multiple Get Log Page calls.
Change-Id: I3c3459959c6246a88938e4f82e3e0046419e7d00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This keeps the existing subsystem list (and therefore the discovery
service log page) in order when new subsystems are added dynamically.
Change-Id: I071639be0fef4139f8f017b433185c786ae55378
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The emulated NVMe controller exposed by virtual subsystems does not
provide the Intel vendor-specific commands and behaviors, so it should
not use the 0x8086 vendor ID.
Change-Id: Iab4f0513d30f610feb62b1899da1b6316f11691c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The generic NVMe library controller initialization process already
handles enabling the controller; the RDMA transport should not need to
set EN itself.
For now, the discovery controller is cheating and not using the normal
initialization process, so move the EN = 1 hack to the discovery
controller bringup until it is overhauled to use the full
nvme_ctrlr_process_init() path.
The previous code where CC.EN was set to 1 before going through the
controller init process would cause an EN = 1 to EN = 0 transition,
which triggers a controller level reset.
This change stops us from causing a reset during the controller
startup sequence, which is defined by the NVMe over Fabrics spec as
terminating the host/controller association (breaking the connection).
Our NVMe over Fabrics target does not yet implement this correctly, but
we should still do the right thing in preparation for a full reset
implementation.
This patch also reverts the NVMe over Fabrics target reset
handling hack that was added as part of the NVMe over Fabrics host
commit to its previous state of just printing an error message.
Change-Id: I0aedd73dfd2dd1168e7b13b79575cc387737d4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows us to print better error messages when connecting to a
subsystem that exists but does not allow a specific host.
Additionally, we can now return the correct error code for a host that
is not allowed.
Change-Id: I16cd4ac2745cf50bb54601b464b0d23954f86fda
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code in virtual.c and direct.c was identical - move it to session.c
to share it.
Change-Id: Ic6e4e9238e8ffacb212e76293c440109aa839f8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the current Virtual mode implementation to session.c and use it for
Direct as well.
Change-Id: I3f0ac93b4247b93d158b0dcb77e257b4b91be129
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Store the host identifier from the Connect command and report it via Get
Features.
Change-Id: I79bc27e05c5944549e7986aadb919c19748e7474
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also return Invalid Field rather than Invalid Opcode to be more
accurate. The spec doesn't seem to define any more specific error code
for this case.
Change-Id: I992c6cca3020ff80b8495c71170222bc75316800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
None of the log pages are actually implemented yet, but at the very
least, we don't want to leak random bits of uninitialized data.
Change-Id: Ic889260eb18d49122f2f250b645bdc5be3561dc5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record the user-provided asynchronous event configuration set via Set
Features, and return it in Get Features.
This value is not actually used, since AER is not implemented yet in the
virtual controller model, but it at least implements the mandatory
Set/Get Features.
This allows the hack in the NVMe host code that ignored the Set Features
failure to be reverted.
Change-Id: I2ac639eb8b069ef8e87230a21fa77225f32aedde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The details of the structure were removed earlier, but
now remove all references even to a pointer to the
structure. The user can refer to transports by their
string name.
Change-Id: I273356f46329ea5372dcd951eda6f14767477d69
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a step toward abstracting away the definition
of the subsystem.
Change-Id: I88b2aa107b27152620f51a1ca2a153792b4c85e9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Print the error information when the kernel RNIC driver did not load
properly, and fix the cleanup logic for the exceptional exit.
Change-Id: I97a45e73d830280b994818f3defc491bc2b6b020
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
As we can support multiple sessions now for each Subsystem, the Host
will use cntlid field to create IO queues, if 2 different Hosts
connected to the same Subsystem, for IO queues' creation process, it
will use cntlid field with 0 for current code logic.
Change-Id: I6fd437892e8eb3146f62f4b211c0baadd70b505e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The NVMe over Fabrics target was storing the PCI device pointer for each
direct-mode controller, but it only really needs the PCI address, which
is exposed via the get_nvmf_subsystems RPC.
Also update the same code path to use the new spdk_pci_device_get_addr()
function for brevity.
Change-Id: I0708b3331b7c279c1a86f0d7459b5deb40dd7c89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the RDMA transport failed to initialize, g_rdma.event_channel may be
NULL.
Change-Id: I4510ee5893389f244f0fbaa1cd4a182868939b25
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For iWARP devices, buffers that are intended to be the
target of an RDMA read initiated by the target must additionally
have IBV_ACCESS_REMOTE_WRITE permission. This is because iWARP's
RDMA read path essentially requests the remote side to do
an RDMA write.
This is unfortunate because there is no way to differentiate between
memory that the remote side can do an RDMA write to and memory
that will only be the target of RDMA reads initiated by the
target. There is nothing we can do about this serious deficiency in
the specification, however, so we have to live with it.
Change-Id: I3d2f2814ce0cb1df4e5347296ef371db4d16be21
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
I believe this is required for NICs to report, but handle
the case where it isn't reported.
Change-Id: I38d10c3590d1df8bb902ab312af0f9e01b9e5032
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent with the way connections and
requests work.
Change-Id: Ifb97499ba72f7dfd02ac54ba1b622726d266262c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The shared memory pool for a session is associated with
a particular RNIC via the protection domain. New connections
attempting to join a session that came in on a different RNIC
can't use that memory, so must be rejected.
Change-Id: Ibd79fe90566a231f76b7472e5e9b484c3e528454
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rearrange the functions in rdma.c to match the order
of the function pointers in the transport. No other
code changes.
Change-Id: I9dbc68912ecd5dfdf53f20b4807d4116933a3c3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the lower level registration functions. The RDMA-CM
examples use the ibv_* versions, so who knows if the
rdma_reg_* wrappers are even well tested.
Change-Id: I8e8250ab09a1401e636aebe2fc04a60806f7a827
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Previously, we mixed use free and spdk_nvmf_rdma_conn_destroy to
free allocated spdk_nvmf_rdma_conn structure, which sounds not
exactly free all the resources.
Change-Id: I2917b442c34d63ba5c014add58f429ae4b831595
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The RDMA API doesn't say whether the wr is copied, so be
safe and allocate it on the heap.
Change-Id: I091af50aa031e1861333f19d864eb52335d6b756
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
'virtual' is a keyword in C++, so avoid using it in variable
and structure names in case any files are eventually
included from a C++ project.
Change-Id: I2122750445def63038af68a3000758e33b937f9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All completion queues for the same listen address
now share a common completion queue channel.
Change-Id: I42c149fe7e221951e8a3826b1713482c37a265b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These 4 callbacks can be condensed into two callbacks, which
simplifies the API.
Change-Id: I069da00de34b252753cdc8961439e13a75d1cc68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The offset variable is used to store the result of a uint64_t * uint32_t
multiplication; a signed integer is not the correct type for the result.
Change-Id: If1fb22314ba7e3cec91808cc051678f809c9e58b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This feature should only be used if clients are coordinating
with one another.
Change-Id: I89a437441a7e3fbcc1e5f6efa1c8e970ade7c2ec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
I/O channels are not actually used for I/O yet however.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa3774ecacc7ec206c7c0c66e6b2f2d10c8fa785
Instead of polling for only 1 completion at at time,
poll for batches of 32.
Change-Id: I5ef99a270489e7b3d2a58cb765915f187775a93e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
1 In our nvmf tgt implemention, we use the async
mode to delete the nvmf subsystem. However, when
we parse nvmf subsystem, we need to use the sync
function to delete the nvmf subsystem. Since if
there is error, we will call spdk_app_stop, thus
async functions will not be executed. It is
approved in my local test.
2 Add debug info in spdk_nvmf_delete_subsystem
Change-Id: Ia8ecd6eee1bbd25cb3e1ceeb0e2146f3f03be228
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
ibv_poll_cq is actually an expensive call to make, so take
steps to begin to minimize the number of times it is called.
Change-Id: I6fc64979604220eb8cacd612b46e3a3b1bca0924
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
Set status code to invalid opcode when opcode is not supported
in nvmf_process_discovery_cmd.
Change-Id: Ibab8097e536f26f16c322d5f539277688906cfc3
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
The spec does not define NQNs as case-insensitive, so replace the
strcasecmp() matching of NQNs with strcmp().
Change-Id: I5946d9ee8e1d0aa5966e9b1b3c6f14f3f5119aec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Fix copy-and-paste errors - when polling the recv CQ, we should print
"Recv" instead of "Send" in log messages.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This can just directly assign the completion instead
of calling memcpy.
Change-Id: I07819c824eba45245b00fa3538a99bc81bcb9fcc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function always shows up as one of the hottest functions when
profiling. I believe it is the memset that is expensive, so instead
use default initialization when the wr is declared on the stack
and just set the members that need to be updated in the function.
Also make the function inline for good measure.
Change-Id: I29e24cdd375311fa033b5a6df772ff4f73e35302
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We need to free the session resource, if there is error
for creating a new session
Change-Id: I7c4f3e779e0b30e213e02b8676d93bd2fe9bf851
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The "+" is not correct, should be "-". Currently,
the issue doest not happen since the offset is 0,
then both + and - is OK. But if we adjust the location
of spdk_nvmf_conn or spdk_nvmf_request, we can find
this bug.
Change-Id: Ib358dc729da901a69442d0402a6089989f49b05c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Check that the number of blocks/ranges in the command fits within the
length specified by the SGL.
Change-Id: I21aded797dc1f1e752fe0bc9cec27310a4fb106a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The Dataset Management command allows several operations to be specified
at once; the virtual controller only supports deallocate for now, but it
should just ignore the other bits in order to be spec compliant: "If the
Dataset Management command is supported, all combinations of attributes
[...] may be set".
The spec also explicitly states that it is acceptable for controllers to
choose to take no action based on information provided, so not
implementing the other attributes is fine.
Change-Id: Ia989dc1faa9c852660bf1299ea18fa8e7bdf4053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also add a diagnostic message if the requested log page ID is not
supported.
Change-Id: I7551b5905d5ebc29356839f0f9153dc86f237106
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than comparing the bdev name against "NVMe", use the new I/O type
supported API to query whether the unmap operation is supported.
Change-Id: I62c7a1ea5529366ff2ae4723b62f24ea78aa8193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SUBNQN is a UTF-8 null terminated string according to the NVMe base
spec, so pad it with zeroes using strncpy().
Change-Id: I486161b26d91f3ea1fd17428e220b9f20a874732
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specified as "ASCII string", which means they should be
left-aligned and padded with spaces, according to the NVMe base
specification.
Change-Id: I25babe0ca417c2e16137b0bfc41fc7834277114e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up the poller and only then free the associated subsystem's
memory. This prepares for future dynamic subsystem creation/deletion.
Change-Id: I9e56cbf8822814930fdbb662095c51b6ad40fbc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently the NVMf target listens for new connections on any address.
Instead, listen only on the addresses specified by the user.
Change-Id: Idb6d37c422e442fc70a8673bd3fcfb9c27b57828
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Use the event framework's new delay parameter to allow
for idle cores to sleep for up to 1ms at a time.
Change-Id: I665f38e590c07338418892afe0e75b0b2c79706e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is no longer needed, since the nvmf_tgt app handles initialization
and shutdown.
Change-Id: I051afe2b4fcbd09b32998386c63f591a0ab343c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be used in future patches outside the library.
Change-Id: I1fcf5709944a884e161e5a6a9eaec033a995a812
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics target library now exposes a simple function call
that polls the acceptor once, and the application handles registration
of the poller.
Also rename the transport function pointers related to the acceptor so
they better reflect their purpose.
Change-Id: I5fa0d516586bf17e73afeb88ff3c2d5b0d46794d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will become more important when other transports are added.
For now, it is also useful to be able to start nvmf_tgt on systems
without RDMA hardware.
Change-Id: I6b9002cc7711f928c4e6b73adcd9b677349ebdd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_shutdown_nvmf_subsystems() was removing the subsystem from the
list, but nvmf_delete_subsystem() also wants to remove it, so drop the
extra removal.
Also rewrite the shutdown loop as a TAILQ_FOREACH_SAFE() to make the
static analyzer happy (and make it more obvious that the loop will
terminate).
Change-Id: Iccadafa77d9cd3e26be21c0f11e62cfc1ef0197c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Verify that the record format is the one we support (only 0 is defined
by the spec for now).
Change-Id: Iddf038b381e540134abf572e0545c97a0ef71d5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spec requires that NQNs are null terminated and maximum of 223 bytes
long, despite the Connect command fields being larger (256 bytes), so
add checks for both subsystem NQN and host NQN before using them as null
terminated strings.
Change-Id: I343d9e44a09ab4d0f6654feba460b31e976c4e56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Users can specify the core for each subsystem and the acceptor listen routine
to run on different cores for performance consideration.
Change-Id: I4bd1a96f39194c870863b4b778e6ea7cf8fc1a2d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This is causing issues during shutdown because the poller removal is not
synchronized with the rest of the cleanup path.
This reverts commit 7dfc5e922d.
Change-Id: If95c4b72c5d120f18bdc3db6d7d532ad1aada642
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This should enhance performance, since the hardware admin queue poll
function takes a mutex and should not be in the performance path.
Change-Id: I7e4acde0337aaf7079811612cba5348acf0a467d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe submission queue head wraparound point can be determined in the
generic NVMe over Fabrics layer; it should not be using the RDMA
connection queue depth.
Change-Id: I9da8f09e4f057f8fdc1ff4c6cc5f48cea7123e11
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Report the maximum admin queue size correctly.
Change-Id: I52cad654bf59806e0abb8d869c22973647056617
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the max_queue_depth parameter rather than rdma_conn->max_queue_depth
so that we can start to eliminate rdma_conn->max_queue_depth.
Change-Id: I1670c634e6d12aa004fb5a10338b7624850fbc4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There were two unchecked allocations in the nvmf library. Check
for allocation failures.
Change-Id: Ic6b3104d825dba1ee6bd1748fa99e132702f300c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This fixes a static analysis warning for unsigned/signed
mismatch.
Change-Id: I49bd8d6d195f13b402e14a85503a5de6114f5b7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The large buffer pool allocation was using the per-connection queue
depth, whereas the RDMA memory region registration was using the global
RDMA max queue depth. These sizes need to match, so use the global RDMA
max queue depth for both calls.
Change-Id: Iae161b719e09e19ca3e81df6593b68a4a2e86614
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new timer-based poller functionality to replace rte_timer.
Change-Id: Ic40653306cc73b40139fe18e06bab29b35721a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Allow higher queue depths by allowing many more send/recv
operations than read/write.
Change-Id: I66c424a6463e5e09be6d5463667241ce9271404b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The target can only provide updates to sq_head inside
of completions. Therefore, we must update sq_head prior
to sending the completion or we'll incorrectly get into
queue full scenarios.
Change-Id: If2925d39570bbc247801219f352e690d33132a2d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows the target to poll for internal completions
at higher priority.
Change-Id: I895c33a594a7d7c0545aa3a8405a296be3c106fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This ensures that the data buffers are not in use
when we go to send the completion.
Change-Id: I30467b3e3964001150f81b21e5b695dcd0974b0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is useful for holding session-wide buffer pools.
Change-Id: I7024da24b210a2205bf1e159d5935e0093b81120
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For small SGLs, even if they are keyed and not inline, use the
buffer we allocated for inline data.
Change-Id: I5051c43aabacb20a4247b2feaf2af801dba5f5a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Read/Write depth is much lower than Send/Recv depth.
Calculate them separately to prepare for supporting
a larger number of receives than read/writes.
Currently, the target still only exposes a queue depth
equal to the read/write depth.
Change-Id: I08a7434d4ace8d696ae7e1eee241047004de7cc5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These don't actually work quite yet, but pipe the
configuration file data through to where it will
be needed.
Change-Id: I95512d718d45b936fa85c03c0b80689ce3c866bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For each connection, allocate a single buffer each
of requests, inline data buffers, commands, and
completions.
Change-Id: Ie235a3c0c37a3242831311fa595c8135813ae49e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be used to release requests that don't
require a completion to be sent.
Change-Id: I8fb932ea8569bf3c45342d9fa4e270af5510c60c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
PORT IDs indicate hardware failure domains according
to the NVMf specification, which means they should
indicate which transport addresses are on the same
NIC. Unfortunately, that doesn't really make sense for
IP-based fabrics because IP addresses can move. The
safest way to present this is to show all IP addresses
as part of different subsystem ports.
Change-Id: I056a50c69be70b4fbf1f896e684ce65bd792241e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMe over Fabrics 1.0 spec corresponds to the NVMe base spec version
1.2.1, so we should pretend to be at least that new.
Change-Id: I36fc44c780de01d6c666e87b803cd47dba0e74c5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These belong in nvme_spec.h anyway and are not used.
Change-Id: I889dfebee523dc5ae503fd0370bb800f1d17fb5d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
