There is a race condition if we call this function in the
polling mode when running with multi-cores, same as other
places where the function is called, we only kick controller
in interrupt mode, also in `vfio_user_ctrlr_intr`,
`ctrlr->sqs[0]` may be set to NULL after the controller
poll call, so return earlier for this case.
Change-Id: I03a7b74a39c966a2b8be610bca0e492d902f6b08
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13696
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
For the case `nvmf_subsystem_remove_listener` RPC call when VM is connected,
we should not relisten the accept poller, because the endpoint will be
destroyed for this case.
Change-Id: Icf8299f26a3bbf7bbe44fd01edb4ede344692d25
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13548
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
While running into this function, even the subsystem can't be
destroyed due to error subsystem state, it's better to continue
the execution.
Continue to fix#2590, QEMU is stuck for the failure case, and
nvmf target should process such error because it may support other
normal subsystems at the same time.
Change-Id: Ib05e24996378b52070d2b760519f476f9b2d7e76
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sometimes VM may get a kernel panic when starting, and SPDK CI will kill
`nvmf_tgt` after 60 seconds, and for this exception, SPDK will raise an
assertion when destroying the subsystem, while here, we remove this
assertion and print the error information.
CI will still mark this case as a failed case, then we can use this error
information to understand error subsystem state in vfio-user.
Fix issue #2590.
Change-Id: I20b16f9e96a566730eca2dd9ea165645bd9160bd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13773
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
this is a prework for further changes - with lock on generic layer
lock on specific transport (e.g. tcp, rdma) layer becomes optional
possibly it won't be required if some contract introduced on public
interfaces (to be considered)
- spdk_nvmf_poll_group_[create|destroy]
- spdk_nvmf_tgt_listen_ext, spdk_nvmf_tgt_stop_listen
- spdk_nvmf_get_optimal_poll_group
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib132babf9e7022342129fe795991cdad834e7f53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13665
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When there are not enought transport buffers for
multi SGL request in state NEED_BUFFER, WRs
received from the data_wr_pool are returned back
to the pool. However rdma_req->data.wr.next pointer
still points to the first WR from the pool. Usually
it doesn't cause any problems since rdma_req will
try to fill buffers again, but when qpair is being
destroyed, all requests are completed forcefully.
When the request is completed and data.wr.next
pointer is not NULL, we'll try to put already
released WRs into the pool one more time.
That corrupts the pool and leads to undefined
behavior.
Fixes#2541
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I238b92eec132d8d845330362af6f335421177454
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13760
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When doing DIF insert and strip, we will reserve extra
buffer in block device layer to save DIF information,
so when attaching one device to Namespace, we will
check the value first so that the reserved buffer
size isn't smaller than metadata size.
Change-Id: Id9272886ce8a7c01271279686730af4e5b24f35a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12188
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
it is impl and used only in nvmf.c source file
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1236f9ede28c5da313d118ce73e1da64381379c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13664
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We cannot count AERs as outstanding IO for purposes
of subsystem pause, because we cannot expect them
to be completed. Previously we would account for this
in nvmf_ctrlr_async_event_request() by decrementing
the counter, but this did not consider cases in the
calling function (nvmf_ctrlr_process_admin_cmd) where
an AER might complete with error before this function,
resulting in the counter getting stuck indefinitely
with a >0 value.
Rather than adding a decrement in all of those
error cases, do a single check at the beginning
of nvmf_ctrlr_process_admin_cmd, and remove the
one from nvmf_ctrlr_async_event_request.
Fixes issue #2215.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica969f116d80dfba0168369ff2fba9a4a42fc076
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In NVMe/TCP target, the socket low water mark is set to
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes.
In corner test, there might be 4 bytes data packet sent to
NVMe/TCP target, after that, if there is no more data sent to
the same socket, the 4 bytes won't be read by NVMe/TCP target
qpair thread. Because of this, there is a IO request didn't
complete in initiator. Then, if manual call the readv function to
read the 4 bytes for the pdu in target, the io request complete
normally in initiator. It seems like the pdu might be split,
and in the situation, the IO request will not complete until
new IO request reach.
After set low water mark in NVMe/TCP target to 1 byte, just
like iscsi target done, the issue disappear immediately.
Signed-off-by: BinYang0 <bin.yang@jaguarmicro.com>
Change-Id: I59d3d900f0b25632d786ef25ab096eabe43476bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13633
Reviewed-by: <chuanwei.ji@jaguarmicro.com>
Reviewed-by: Qingmin Liu <qingmin.liu@jaguarmicro.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Currently we initialize pending_bytes only in pre-copy state. This is
pointless since we don't generate any migration data at this state, so
if the vfio-user client reads migration data it will be garbage. Even
worse, we don't re-initialize pending_bytes in stop-and-copy state, so
if the vfio-user client reads the entire migration data in pre-copy state
then there will be nothing left to read in the stop-and-copy state,
which is where we actually produce the migration data. This results in
corruption of the controller's state (e.g. queues).
This patch ensures that migration data are available in the
stop-and-copy state, by setting pending_bytes accordingly only in that
state.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I0b215e64cd1f58f254e1079f06402d196f984099
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11718
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The read_data, write_data, and data_written migration callbacks assume
that the migration data are accessed in one go. Until this is fixed,
with this patch we ensure we don't ignore unsupported ranges.
Change-Id: I640415858b8c374ffc9e487cd20f5130e0be9305
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11717
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
QEMU may exit due to some exceptions which mean the socket
connection may be disconnected at any time, so for asynchronous
callbacks especially the subsystem pause/resume callbacks, they
all run in asynchronous way, the controller pointer may become
invalid before the callbacks are called.
Fix#2530.
Change-Id: I6d73597d75761e28844e83bfee7f8a446d85fa49
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK was previously incorrectly requesting log levels such as
LOG_NOTICE. Update libvfio-user so it is in fact supported, and check
that setting up the callback actually worked.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I41c2a8cf683868c3c2e40470f78e1af3dba29de4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12839
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Update libvfio-user such that the SGL access APIs can be used
concurrently. We are guaranteed that the guest memory remains mappable
now that the vfio-user transport has implemented quiescence.
This is currently only really useful (for a single controller) in poll
mode, but shouldn't break interrupt mode, as we still ensure all a
controller's queues are on the same poll group in that case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0988e731558e9bf63992026afc53abc66ec2a706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12349
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
While we are quiesced, we're not allowed to access guest memory via the
SGL APIs. Refuse to process any commands unless we're in RUNNING state.
We need to synchronize with each poll group via a message before we can
call vfu_device_quiesced(), otherwise we could still be processing
commands via nvmf_vfio_user_sq_poll().
For interrupt mode, we then might miss processing commands in a
corresponding interrupt callback, so make sure we process them when we
return to RUNNING state.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ieae5a9ae8d9de722e0bdf4bb8d61e7e678159f1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12912
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
An oversight meant that quiesce was in fact only pausing the admin
queue, and not ensuring no I/O was ongoing. Fix this by passing the
right flag to spdk_nvmf_subsystem_pause().
Change-Id: I930c616d1170ac0299339b04928da57f6a7489ab
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the broadcast NSID is supplied, every namespace is paused.
Change-Id: I40cc3e04b5a75b731ab0c8946ed8146275cc8ee4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13394
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Profiling data showed the deference of the CQ head in cq_is_full() was a
significant contributor to the CPU cost of post_completion(). Use the
cached ->last_head value instead of a doorbell read every time.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib8c92ce4fa79683950555d7b0c235449e457b844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Patch below changed the struct spdk_nvmf_ctrlr_data by inserting
spdk_nvme_cdata_fuses. This affects large number of nvmf interfaces.
(cbfd581) nvmf: Add NVMe fused operations to spdk_nvmf_ctrlr_data
Unfortunately was missed due to lack of rebase after ABI update on
CI machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifd06d0ddbefe9ea6c9715adae9881d4606e34b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13013
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Community-CI: Mellanox Build Bot
Add an option to stop nvmf transport advertising support for both the
compare command and the fused compare_and_write operation in vfio_user
transport.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I3900218c0e9884f86a5c8698a030f8106b64f2f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compare command, when not supported natively by the underlying bdev
is emulated by the bdev layer.
Change nvmf ctrlr data to advertise compare command by default.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I88646e6c1a7d7a2829be813ff0241661724bd127
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12918
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fused compare_and_write operation is always advertised by the nvmf
transport.
Add the fuses structure to spdk_nvmf_ctrlr_data to make advertising
fused operation configurable.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I73ee03dc8948f1d250cc0a8f0b8a3bde042a45e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12917
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reflect that we are kicking the entire controller.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If5723a5f485745ef0a2456942b6df1d54133815b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12665
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
This function is really about re-arming all SQs for a poll group;
refactor to reflect this.
This is necessary ground-work before we can support multiple reactors in
vfio_user.c in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I170fae2076fc80e742926cf448973671ac9e3bd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepare for the later patch, and make the later patch code clean
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I12b175c86a5245f38dc76fe2d3918ec4b30a475a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12830
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
If accel_tasks are used up, we should not directly return but give
an another chance to calc it directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I983b65d7dfff0fea3974682e886d2dcf309cd2c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12841
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
The timeout poller might still be registered when a qpair is destroyed
if we send C2HTermReq and then destroy the qpair before host terminates
the connection.
Fixes#2527
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I21acc147fdba3aaac66b0c6ed54e155195fe9816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We need to check that the given SQ is active (i.e. is currently mapped
into the process), so make the check the same as that in
poll_group_poll().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibd3babd7520f611f596f3bab15765fa13b4d6b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is better represented under the name vfio_user_ctrlr_intr().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic3fa0fe238fd8ce4930bfd3e34b9dbc1b935aa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12662
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's a non-zero cost to looking up the CQ; only call this function in
the poll path if we need to.
While here, we'll streamline the ctrlr-level check.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6bf123f759fcd856196f6613cb6c7d0219550136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12660
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Rui Chang <rui.chang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only 4 bytes or 8 bytes are valid numbers when to access NVMe
registers, add the check here.
Fix issue #2495.
Change-Id: I63b6e16a156f6eba17f397ec9d1a447e6a80b4da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The CSTS.SHN is changed only in shutting down the controller,
nvmf library already ensure that all the outstanding IOs will
be flushed before that, so we can remove this check here.
Change-Id: Ib93a256e986b7b2ec1da0fc7992feb3a02c1d657
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
After finishing migration in source VM, the subsystem is in
PAUSED state, the controller is dead for the source VM, we will
destroy the controller when disconnecting socket, but after that,
we should RESUME the subsystem so that it can be ready for the
next new client.
Fix issue #2363.
Change-Id: Icf0999b9085cebe8be4c8783e1a43bb13d4f7987
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The completion callback of `spdk_nvmf_subsystem_resume`
and `spdk_nvmf_subsystem_pause` can run in different
core other than the `vfu_ctx` core, this may lead to
race condition when changing controller's state. Here
we use a thread message to change it in the same thread
context.
Change-Id: I53d139adcca6ff72a3b91a2a931f1239f3271fa9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12558
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I3b75eea83bd7d700d20a6189e8fb6d1f066dc9b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Clarify via a variable name that we're dealing with the admin CQ
specifically.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I032f6b27e2d75bffb9d95481f177ce0c3655550c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12556
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Constantly polling the socket degrades performance significantly.
Polling the socket at a much lower frequency, every 1ms, is good enough
for now.
fixes#2494
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Co-authored-by: John Levon <john.levon@nutanix.com>
Change-Id: I4a7d35c45ece863b9df756324c23f41736df49f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12494
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we don't set the cid before failing the misordered
command, we use some other random cid, causing the
initiator to think the wrong command was completed.
Fixes#2481.
For this issue, the target was completing a
previously submitted AER, not the fuzzed fused
command. The initiator would then submit another
AER to replace the completed one, but the target
complained that the initiator sent too many AERs
since the target didn't really know it had completed
an AER so hadn't adjusted its num_aer count.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4bd66f147086b262d0e48b8399d237e5ed3c2651
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12452
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
ACWU is a 0's based value, and our intent is to
report that our target's ACWU is 1 block. This means
we should report ACWU as 0, not 1.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ad0606be07fd38bc6c2e3a8e4bb78225b3dfadc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12385
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The spdk_rmb() in nvmf_vfio_user_poll_group_poll() is unnecessary: we
already have a read barrier for SQ tail updates at the per-SQ level, so
this doesn't add anything.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I88cddd968f4a949640754526e19cb869d9fb31af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no need to spdk_rmb() in nvmf_vfio_user_sq_poll() unless we
actually found the tail has advanced.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I778835c527409764c3db78459b2aa76420cc0105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12378
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
We need to keep track of the shadow doorbell buffer locations, and make
sure to re-initialize on resume.
Co-authored-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If3ba456fb35f6f6199e4ff14cec1aad96775f71a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
There were a couple of places not using the standard formatting for qid
still.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If96c3f6d762128b0f274e2c4e9eebf4e80e35139
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us use it more widely.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9c67be19020677fab3eafe05c1e0f91c3d04611d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When a qpair is disconnected, any outstanding zero-copy requests are
freed to release their buffers before the qpair gets destroyed.
However, if there is a PDU being sent to the host as part of this
request (e.g. C2HData/R2T), we need to wait until that write is done
before freeing the request to avoid freeing it twice.
Fixes#2445
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2a6e82f26a4f011dfd18c55c821e9039de7e584a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12255
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes the flag indicate whether there's an outstanding PDU write
for a given request. Additionally, it reduces the number of places we
need to update this flag.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id7e587f84955b096c46bfbf88d4dd222214d4a6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12254
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make it possible to have some common handling in request's PDU
write completion.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icaff38da0e47dd93327e3d8f09edd9fdba8f532e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12253
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When an request using zcopy is completed, it might have an unreleased
zcopy_bdev_io attached in three cases:
1) the request was a read,
2) the request was a failed write,
3) the qpair is being disconnected.
The last case was missing from the assertion.
Fixes#2425
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5cbeaa198a1fd878c98caf148a0bc47060e35bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12263
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In a similar manner for what we do for other per IO data-structures of cmds,
cpls and bufs, use the conventional huge-pages based spdk allocation scheme
for RDMA requests and receives.
Change-Id: I4c2e86e928106e78c053f24915e2a9ce1a200c78
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To maximize cache locality, use lifo and not fifo when managing objects
which are used per IO such as the RDMA receive elements queue.
Change-Id: Id8917558acc1bec29943fcbae6afe6b072bde6ac
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
RDMA READs can cause cmds to be submitted to the target
layer in a different order than they were received
from the host. Normally this is fine, but not for
fused commands.
So track fused commands as they reach
nvmf_rdma_request_process(). If we find a pair of
sequential commands that don't have valid FUSED settings
(i.e. NONE/SECOND, FIRST/NONE, FIRST/FIRST), we mark
the requests as "fused_failed" and will later fail them
just before they would be normally sent to the target
layer.
When we do find a pair of valid fused commands (FIRST
followed by SECOND), we will wait until both are
READY_TO_EXECUTE, and then submit them to the target
layer consecutively.
This fixes issue #2428 for RDMA transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01ebf90e17761499fb6601456811f442dc2a2950
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12018
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract the code for DIF from nvmf_rdma_fill_wr_sgl() into
nvmf_rdma_fill_wr_sgl_with_dif().
Then clean up nvmf_rdma_request_fill_iovs() and
nvmf_rdma_request_fill_iovs_multi_sgl().
Additionally, this patch has a bug fix. nvmf_rdma_fill_wr_sgl_with_dif()
returned false if spdk_rdma_get_translation() failed. However, the
type of return value of nvmf_rdma_fill_wr_sgl_with_dif() is not bool
but int. The boolean false is 0 in integer. Hence in this case,
nvmf_rdma_fill_wr_sgl_with_dif() returned 0 even if it failed.
Change nvmf_rdma_fill_wr_sgl_with_dif() to return rc as is if
spdk_rdma_get_translation() returns non-zero rc.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I71cc186458bfe8863964ab68e2d014c495312cd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11965
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: fengchunsong <fengchunsong@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To help grep, use a standard sqid:%d style format for identifying queue
IDs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib82c81939f85f9beb333a4db10d006524522a1d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
As a general utility function, move it up with the others.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I32881c01afd9819c889730d7c09163c95fbb827e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For each queue, track its doorbell location individually, rather than
needlessly recalculating it every time we look up the doorbell value.
This will also greatly simplify shadow doorbell support.
Co-authored-by: Andreas Economides <andreas.economides@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6882d2f92ee2f2b2b90c54ee14e5f6b41ecca85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
R2Ts can cause cmds to be submitted to the target
layer in a different order than they were received
from the host. Normally this is fine, but not for
fused commands.
So track fused commands as they reach
nvmf_tcp_req_process(). If we find a pair of sequential
commands that don't have valid FUSED settings (i.e.
NONE/SECOND, FIRST/NONE, FIRST/FIRST), we mark the
requests as "fused_failed" and will later fail them
just before they would be normally sent to the target
layer.
When we do find a pair of valid fused commands (FIRST
followed by SECOND), we will wait until both are
READY_TO_EXECUTE, and then submit them to the target
layer consecutively.
This fixes issue #2428 for TCP transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a9e13690ecb16429df68ae41b16b439a0913e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12017
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename ->doorbells to ->bar0_doorbells. This will help avoid confusion
later with shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id432938cfeb3033e79dc6e1b491dad964227687a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe over PCIe Transport Spec 3.1.2:
The host should not read the doorbell registers.
Explicitly refuse these reads.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie64fd5ce7988ee86c612b3ef6046a57af467e266
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11787
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Refactor controller reset a little bit for cleaner code.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2b3323005d4e788ffe980d41c349702828886981
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11786
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we're in interrupt mode and live migrating a guest, there is a window
where the I/O queues haven't been set up but the device is in running
state, during which the guest might write to a doorbell. This doorbell
write will go unnoticed. This patch ensures that we re-check the
doorbells after an I/O queue has been set up.
Fixes#2410
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I161d2a0e7ab3065022b2bccbe17f019640cceeba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11809
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure cq->group is set even in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9f722917a8e3aebbd5d66648a3909f795897ec1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11997
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were accidentally reading the spdk_nvme_status from the CPL; on one
test, this was contributing to 2% of cache misses.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7c967690458a183799f8d835360800d3094c3131
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11849
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Trivial chore, cleanup multiple branches for subsystem->flags.ana_reporting
that can be collapsed wtihin spdk_nvmf_ctrlr_identify_ctrlr, which makes the
code easier to read.
Signed-off-by: Jon Kohler <jon@nutanix.com>
Change-Id: Icb2064f078d730d1f28f299582dc46254c7f6df3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11951
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When rq is used, rnr_retry_count is not set. As a result, the initiator
cannot connect to the target after some error. Set the rnr_retry_count
to avoid infinite retries.
Fix issue #2429
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: Iab03ea5ff10f5a9759c41f26589731aa92ef2f56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11946
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
When generating a discovery log page, we will add entries
for the discovery subsystem for all listeners except the
one associated with the controller that generated the
log page command. We do this comparison using
spdk_nvme_transport_id_compare().
But this function compares the subnqn of the trid, and
the subnqn is not set in either of the trids that we
are comparing.
The listener's trid always has an empty subnqn, but
the source trid has an uninitialized subnqn when
we do the comparison. This means that sometimes the
subnqn may be empty (which always happens in debug
builds) but sometimes may contain garbage. This
means that sometimes an entry would be added to the
log, even for the trid of the discovery controller
that generated the command (meaning the discovery
controller would end up referring to itself which
is not allowed).
There is an even more subtle issue with this. If the
host reads just the log page header, the nvmf target
generates the entire log page, and just returns the
header contents. Let's say in this case, the source
trid has an empty subnqn, so we don't generate an entry
for it, and report numrec = X and genctr = Y. Then
the host reads the X log page entries. But now the
source trid is garbage, so a discovery log page entry
is returned, replacing one of the "real" log page
entries. And since genctr didn't change, the host
thinks the data is all valid, meaning there's a log
page entry for an NVM subsystem that ends up getting
dropped.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cfc566ddaf17153aec089bf3d9b3480bec3e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iad2ea681ad8ad234e70c7310b58785a999612156
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
To speed up qpair lookup, an idea to use the DPDK hash library was
proposed. But we have some concerns for the idea, we may see performance
regression for small configuration, lib/nvmf is depending on the DPDK
feature, and so on.
On the other hand, RB tree is simple to use and is not likely to have
negative side effect.
To use RB tree easily, cache QP num into struct spdk_nvmf_rdma_qpair.
Change-Id: Id4ea4e75692f86335b3e984c3fc128e187f22c72
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11798
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_rdma_poll_group_add() added a rqpair to the poll_group->qpairs list
before its initialization.
If we change the poll_group->qpairs list from linked list to RB tree,
the qpair can be added to the poll_group_qpairs list only after its
initialization completes because QP number is necessary.
As a preparation, change nvmf_rdma_poll_group_add() to add a rqpair to
the poll_group->qpairs list after its initialization succeeds.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I42525f68c5efbd445f96da8f4f63d31f06f739e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When vfu_run_ctx() returns EBUSY, due to an ongoing quiesce, we did no
work, so should return SPDK_POLLER_IDLE.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I5953ab652f0adf22df81c94c4bece507833cece4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11810
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will use nvmf library CSTS.CFS instead so that the client can
get this error status.
Change-Id: I42c248a7333d1f9c940bb29135c887a61c906bd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No logic code changes, we will define a nvmf controller migration
data structure in public header file, this is a preparation patch.
Change-Id: I0a98581b320ac9b12b7e4bf838222c5075168e64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11493
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To fully support interrupt mode for the vfio-user transport, we need to
arrange to wake up in one of two conditions:
- we receive a vfio-user message on the socket
- a client writes to one of our BARs
In response, we can process any pending vfio-user messages, as well as
poll the actual queue pairs.
As there is no way for a client-mapped BAR write to cause us to wake up,
interrupt mode can only work when mappable BAR0 is disabled. In that
case, each BAR write becomes a vfio-user message, and can thus be
handled by registering the libvfio-user socket fd with SPDK.
For the poll group poller, we enable interrupt mode for it during the
vfio-user ->poll_group_create() callback; this only works in the case
that no other transports without interrupt mode support are sharing that
poll group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic784d01078b2006edb27892fc0613f934eca930b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
