Use nvme_ns_construct()/nvme_ns_destruct() for each subtest.
This is what lib/nvme uses when creating/deleting namespaces,
so it makes sense to use the same functions in the unit test.
If we explicitly call memset(), we might hide real problems,
since e.g. nvme_ns_destruct() does not clear all struct members
in struct spdk_nvme_ns.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia0ffce3d0a29088282e9fc8fc5413b98d1fe7c63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4264
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The thread loop function fuse_loop_new_thread() may not be executed
before checking the mount point.
For #1572 case, only one notice log as follow:
"Mounting filesystem on bdev BlobfsBdev to path /tmp/spdk_tmp_mount..."
For normal cases, there are two notice messages:
"Mounting filesystem on bdev BlobfsBdev to path /tmp/spdk_tmp_mount..."
"blobfs_fuse.c: 267:fuse_loop_new_thread: NOTICE: Start to loop blobfs..."
So add 1 second delay here.
Change-Id: I8f36fa538cb8864c94fe8110ced38703b7e2e413
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4260
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On clear linux the # was interpreted as bash comment.
The result was that no file was included and CU_VERSION
was undetected.
Removing the backslash before hash resolves it on clearlinux,
but breaks on fedora 31. Workaround in this patch portable
for both, as strange as it looks.
For future reference:
Fedora 32, Make 4.2.1, gcc 10.2.1, bash 5.0.17
Clearlinux, Make 4.3, gcc 10.1.1, bash 5.0.16
While here, added more specific string detection for
CU_VERSION. Before patch e7a86c42 only CUnit header was scanned,
now other output from CC is. This will prevent accidental
matches in the future.
Fixes#1562
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia4aa9fcbc3ad810755cfecd745c5c1ecd2a70717
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4240
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was missed in CI, due to disabled SPDK_TEST_BLOBFS
test flag in UT job that performs check_so_deps.sh.
Error seen when it is enabled:
there was a dependency mismatch in the library blobfs_bdev
The makefile lists: 'bdev blob_bdev blobfs json jsonrpc log rpc thread util'
readelf outputs : 'bdev blob_bdev blobfs event json jsonrpc log rpc thread util'
Temporary workarounds have been added, ignoring blobfs_dev
in the abi check test. This will allow for better transition
on CI side. After this patch is merged, UT job flags on CI will be
updated to include SPDK_TEST_BLOBFS and abi reference repository
will be recompiled with this flag.
Next patch in series removes this workaround. It will be merged
after work on CI side is done.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4753a918d5760f154d4a59349747a0b1356e9c91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3961
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The issue happens when SPDK RDMA initiator is connected to a remote
target and this target reports rather small (or zero) ICD and we try
to send several SGL descriptors.
Since SGL descriptors are located in ICD, we should check that their
total length fits into ICD. In other case sending such a command
will cause RDMA errors (local length error)
Change-Id: I8c0e8375dae799bc442ed2fab249cad2c4ccce51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4131
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following the last patch, simply set NVMF_EXAMPLE directly without
using echo.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc3b9268263f44c0b865a15a1ed1a15a404ed23e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
$USER gives the login name who logged in the terminal and
logname prints the login name who logged in the session.
test/nvmf/common.sh has used $USER to start the SPDK application,
as non-root but test/nvmf/host/perf.sh and
test/nvmf/target/nvmf_example.sh have used logname to start the
example application as non-root.
It looks OK to use $USER to start application as non-root like other
cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia0a17e3bd37a76e4d808e5816ba6716920f8f340
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an internal API nvmf_subsystem_set_ana_state() to change the
ANA state of the subsystem listener whose trid matches.
ANA optimized state, ANA non-optimized state, and ANA inaccessible
state are supported. ANA change state is not used and ANA persistent
loss state is not supported.
After changing the ANA state of the subsystem listener, on each poll
group, controllers, whose the subsystem listener match, send ANA
change notice.
Initiators query ANA log page anyway if they receive ANA change
notification. False positive notification should be avoided but is
acceptable.
To avoid any concurrency conflict, simply compare ctrlr->listener and
the passed listener.
It may be better to execute nvmf_subsystem_set_ana_state() on the
subsystem thread but currently the RPC thread adds and removes a
listener to and from the subsystem, respectively, and the subsystem
has been suspended while executing nvmf_subsystem_set_ana_state().
Hence we keep this as a future enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If1910b79dd33d904114e258ae2c5e868947cdc52
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4079
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
These were not really needed and parsing functions had to
be unnecessarily called multiple times.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I277125bbb3d598a348164e8834843d0d04f1434c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculating kernel fio results did not take
number of workload retries into account for latency
stats.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I418845d2f6be328827e4217c2eca761b0c211504
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Using only Bash for calculation in this script
results in operating only on integers, which lead
to wrong results being saved after test run.
For example - submission latency of 0.175usec was
saved as 0usec.
Change-Id: I6f9924d12189631ab6d0bdc5385e642b6c2aa34f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We still need to be able to explicitly set specific
bits in the cluster array during initialization and
loading (especially recovery), so we use a bit_array
during load, and then convert it to a bit_pool just
before calling the user's cmopletion callback.
This gives a roughly 300% improvement over baseline
on a benchmark which does continuous resize operations.
The benefit is primarily from saving the lowest free
bit rather than having to always start at bit 0. We
may be able to further improve this by saving extents
in the bit pool as well, although after this patch,
the benchmark shows other hot spots different from the
bit search.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb1d75d8348bc50560b1f42d49dbe4d79d024619
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove LIBRXE_INSTALL from pkgdep/apt-get because we dont use it any more.
Move ibverbs-utils and rdmacm-utils to package list for allway install in vm_setup.sh
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0b0952bb898802a7f69460f7d6b2f41be3d82572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add option to install vagrant and it's plugins
required to run SPDK test VMs'.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I89c9802ebb80bd411ebe93dbc98e54fb32779e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3576
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test repeatedly creates and deletes blobs to
confirm that the used_md_pages and used_clusters
bit arrays are managed properly. This test exposed
the bug reported in #1590 which has now been fixed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-ID: If5d7b7f03cc2fb9daac928573c73430b74ea9a51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4038
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This removes all the sleeps called after setup.sh reset. These
sleeps were meant to wait for devices given tests depend on.
Change-Id: Ibb86c9f6f8d5f1b05d165e84d9019530af84f9ea
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is already defined in nvmf common file. so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I40b003c8361fe889e9ed6a2add9878e362b5e966
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
And modify test/env/vtophys to resolve linking errors.
SPDK_PRINTF() and SPDK_ERRLOG() use spdk_log() procedure which is
customizable and redirectable, so it is preffered over printf()
In case of test/env/vtophys/ program,
we have to make it an app first to avoid linking errors.
Change-Id: Id806ec3bb235745316063bbdf6b5a15a9d5dc2d9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
vm_setup.sh currently depends on package managers to determine which
SPDK dependencies must be installed, however, this may cause issues on
systems which provide more than one package manager, e.g., dnf and
yum. Due to that fact, some packages were missing since they were
bound to a specific package manager instead of the distribution, case
and point, nbd. Also, some OS-dependent steps had to be duplicated,
like repo refresh on Centos8, since either of the managers could be
in use.
To address the above, allow for souring of OS-based routines to
overwrite defaults set based on given package manager.
Change-Id: I0d8d88dea4521e9c76b187c69743e4e09aa724e6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The d09acccf changed the order in which dnf, yum managers are picked
up, however, the refresh step was not moved to dnf which actually is
by default shipped with Centos8. Simply add the missing step.
Change-Id: I6f845d794b79ff01d4abfff098b0b29a9c489189
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Make sure that setup.sh waits for block devices during the tests.
This is to make sure that the underlying controllers are ready to
be talked to and minimize the amount of their flakiness.
Change-Id: Id09445de7ac7ccf4c9f679ee2b6c4bdd14c89733
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For I/O commands, block them if ANA state is inaccessible, persistent
loss, or change.
For Identify command, clear capacity field (nuse) to 0 if ANA state
is inaccessible or persistent loss.
For Get Features command, block features, error recovery, write
atomicity normal, reservation notification mask, and reservation
persistence if ANA state is inaccessible, persistent loss, or change.
For Get Log Page command, error information page does not return
any data yet, and hence there is no change.
For Set Features command, if ANA state is inaccessible or change,
block the command if NSID is 0xFFFFFFFF or if feature is error recovery,
write atomicity normal, reservation notification mask, or reservation
persistence, or if ANA state is persistent loss, block the command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15dd593227e451aa2247c53da42b6acad1757907
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4043
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Find the subsystem listener whose trid matches req->port->trid when
creating a controller, and store it in the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea343b8d8ae827b554df2245b67aed113469c592
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK patch d0fcc38f5
"vhost: improve device readiness notifications"
introduced changes that need to be workedaround when
updating to DPDK 20.08.
This shall be removed after appropriate fix is created
for DPDK.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2f0b4ef4692ba8d9fbb7d1966332def593d1dc34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4001
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The former was dropped and merged with crypto/sha.h in kernel 5.8.
Change-Id: I9005592feacc71c9a0e80f06b5de2d65a6bc06d9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4030
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Similar to internal vhost library, rdma lib should be ignored
if SPDK was not compiled using --with-rdma.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic747f96f96182c04592bec44ff64ceafd11634f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Run two iSCSI target applications, the first application has a
public portal 10.0.0.1:3260 and the second application has a private
portal 10.0.0.3:3260.
Each application creates a target which has the corresponding portal
and a NULL bdev. The NULL bdev has the same configuration between
two applications.
By using NULL bdev, we do not have to worry about shared storage.
Then move between two portals by using temporary login redirection
function.
We tried to differentiate only TCP port but such idea did not work
with the popular iSCSI initiator, open-iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I578f3b57d738ade6da74a0ec3d7fbb140139669d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3440
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To test iSCSI login redirection feature, we need multiple IP addresses
for target application. Furthermore, it is nice if multiple iSCSI
target applications run.
This patch creates such network virtually using veth device and
ether bridge but keeps compatibility even after this patch.
Create three veth interface pairs and one bridge. One pair is for
initiator and two pairs are for targets, and all pairs are
added to the same bridge.
Create two network namespaces for targets and add one pair to
the first namespace and add another pair to the second namespace.
Namespace is not created for initiator.
Necessary connectivity is tested using ping after creation.
iSCSI login redirection test code will follow.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0ca7b4a7af652602f3d6a7ea5669a06ce41a5f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3887
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
rocksdb.sh is run independently from the autotest.sh as part of the
BlobFS-nightly-autotest job. In case a rogue file lands in the dir
where the results are stored, i.e., a core dump, CI may fail to fetch
the artifacts due to not sufficient permissions. To avoid that, make
sure cores are always processed as part of the test.
Also, adjust permissions across the entire $RESULTS_DIR, just for the
good measure.
Change-Id: I8df7799cc7ed7424950cc26250597a0e2d73bc9f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3943
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
find's -name doesn't work with regexes hence the applied pattern
didn't match on plain "core" name (as the expression would suggest to
match on). Replace it with additional shell patterns to include some
additional common core_patterns - this is relevant for the tests which
may be run indepdendently from autotest.sh and still use core_pattern
with its default setting.
Change-Id: I5ba1bc44b156a68779d09688718b7c634b6d8cba
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, BlobFS-nightly-autotest jobs are failing due to this test
not having enough memory around. Change that by allocating some
overhead depending on what CACHE_SIZE was set to.
Change-Id: I9b122189d39a7a73ab8521f699324516d09ae1c3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The loop here was counting the bytes in the cpus array,
but the lcores are represented by bits.
While here, add a unit test that exposes this bug and
demonstrates it is now fixed with this patch.
Fixes#1570.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a1fc48a8085254f41587e3b3d5d732154b90134
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3931
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Potential bdevperf failure is hidden out from the user as it's
std{out,err} is redirected to a file which is purged upon exiting
from the test.
For the sake of debugging, print contents of the output file before
removing it.
Change-Id: Ifd0ff94aa1812ec518c60ada5a63342d7d5b80dd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3917
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The main use case is to make sure that files, which are normally
purged upon exiting from the tests (regardless if the test finished
successfully or not) are also printed out to stdout - this is done
for the sake of debugging any potential failures that might have
been hidden out in said tmp files which we don't want to keep
around.
Change-Id: I294c3bdc8f45be49e414bf45f80848be89355360
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3916
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently when the uevent processing code finds a non-uio/vfio
uevent, it just stops its loops and returns. This means that if
there are a lot of non-uio/vfio uevents, the netlink socket buffer
can build up until its full because only one non-uio/vfio event
gets drained per spdk_nvme_probe() call (which may be very
infrequently).
So modify parse_event so that it does not indicate error when
a non-uio/vfio event is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8a40f71ee89d597ce46129eac889fe5b7ef5171
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The specification says it will return INVALID FIELD if the NS
is in inactive state.
Fix issue #1551.
Change-Id: I1b32f023ed665d410f4705e439068699e2b2f8de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3860
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
