vm_setup.sh now calls pkgdep.sh to ensure that the basic packages needed
to compile SPDK are installed. Pkgdep remains a separate script because
it is supposed to contain the minimal set of packages for building SPDK.
while vm_setup is used to configure a complete testing environment.
Change-Id: I4038f522c66ad5b2c55ed73b1170f796b2c94e27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/415895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ifac14f74f6b7681fccbf463f744d145ae8299240
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415892
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for AIO.
Changes in tests and spdkcli done accordingly.
Change-Id: Ib732953a2c138dc25915ba97ce3a8acf771ad74f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415462
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev iscsi initiator had a bug which resulted in
an io_device getting unregistered twice. An error message
got printed but it didn't immediately result in any kind
of failure detected by any tests. Really this should be
considered a fatal error, so add an assert() so it's found
more readily should these kinds of bugs occur again in the
future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30df86ba2e6a3559e00f054c7dde14713d6ac80f
Reviewed-on: https://review.gerrithub.io/415375
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be needed when we need to re-attempt an IO submission
when the bdev_io pool is exhausted.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0500ee1b7881c1be7ba8a72a930190d85e7a0f77
Reviewed-on: https://review.gerrithub.io/415301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for upcoming patches which handle -ENOMEM
from the SPDK bdev io submit function. When we retry
submitting the I/O, we do not want to "re-prepare" the
I/O - i.e. we don't want to calculate a new offset or
memset the buffer again for verify workloads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0265651cb1fad372bf3e801c262dc159058a2a1d
Reviewed-on: https://review.gerrithub.io/415300
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia32bd2655a4cc1c082ce5fd5420f6abaabe40133
Reviewed-on: https://review.gerrithub.io/415299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0c6c410d120bec830ec17105de43ca62bf202b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously spdk_thread_send_msg was being defined in the
test, but util is also linked in. Instead, use the real
io_channel abstraction in the tests.
Change-Id: I5c9ce1d0675c43e3ea5b4c88d2dd8282a86a0545
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A nasm or yasm compatible assembler will be required to build the
intel-ipsec-mb library needed for the DPDK crypto framework.
Change-Id: I3e1822069452208aa796caf84ddd9995fcac2cd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415065
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was partially fixed in commit 1e481d0438 ("nvmf: Do not allow NN
to change while connections present"), but we did not handle the case
where the user asked to add a NS with a NSID outside the current NN.
This patch reworks the logic (again) to be more straightforward and
hopefully more obviously correct.
Some confusion between max_allowed_nsid and max_nsid is also clarified;
if max_allowed_nsid is set, then max_nsid == max_allowed_nsid at all
times, so we don't need the extra logic when calculating NN in
spdk_nvmf_ctrlr_identify_ctrlr().
Change-Id: If531baf1114e03441ff3e1e1be098071702d9056
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will return the number of currently allocated threads.
Modify the bdev_io caching code to use this new API since these
caches are really per-thread, not per-core. SPDK does not support
dynamic threading yet, but once it does, we will want callers to be
using functions from the thread API - not counting the number of cores
allocated to the application.
spdk_env_get_core_count may still be useful as a helper function, so
it is still kept and not deprecated. For example, app.c uses it to
print the number of cores allocated to the application. bdevperf should
eventually be modified to use spdk_thread_get_count, but holding off on
that for now until spdk_event_allocate() uses threads instead of a reactor
lcore to specify where the event should be executed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a30e3e825e6821da87d3927a2443768dfd740f4
Reviewed-on: https://review.gerrithub.io/414709
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Several apps link against $(COPY_MODULES_LINKER_ARGS) without adding
$(COPY_MODULES_FILES) to the dependency list. This means that those
apps would not get rebuilt if the copy modules were modified without a
'make clean'.
The blobfs example apps were also missing other dependencies; add those
while we're here.
Change-Id: Iac6606b650d32bf21f7f31bd2727f9e92c0da748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414888
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some features are per namespace and require a namespace ID; the existing
get/set feature functions do not allow passing NSID, so add new API
functions that do:
* spdk_nvme_ctrlr_cmd_get_feature_ns
* spdk_nvme_ctrlr_cmd_set_feature_ns
Change-Id: Ia7dc96e57badf1a56489785fb288493592b58b80
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414706
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds to nvme driver new public API dedicated for
Open-Channel:
* spdk_nvme_ocssd_ctrlr_cmd_geometry
Change-Id: I69592618d9bcc280346258e771195683d5b33893
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/412816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes the default setting of IOAT copy engine from
Enabled to Disabled. Accordingly this patch changes the config file
specification for IOAT copy engine from "Disable Yes/No" to
"Enable No/Yes".
Subsequent patches will add a new JSON RPC to configure IOAT
copy engine dynamically.
Change-Id: I754990cbb6ecc096953dd2fb9d34366b91111bf8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the core control policy for the
bandwidth rate limit (max bytes per second). Change
the existing functions for a common name and specially
handle the case when IOPS and bandwidth rate limiting
are both enabled.
Change-Id: I9f4565958d472559ef6d8bea52b1fe2a5f3c8969
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413821
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support the bandwidth rate limiting besides the IOPS rate
limiting, this patch is to add the support of the configuration
parse. The format will be as following to have a 10 (10M)
on the Malloc0 bdev. The default unit is in MB.
Limit_BWPS Malloc0 10
Change-Id: I62d70391ccad7804e6673ec56a3ed1cb0a4fbbd4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We especially want to do this when a test fails, but
running it in passing cases too ensures spdk_bs_dump at
least gets run on every patch through the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2d696dbf21d14681a73cb990933cba4e57a5f8a5
Reviewed-on: https://review.gerrithub.io/414482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
A couple of files were accidentally marked as executable.
Change-Id: I89ff0bc037fba1b5d073ceea55c78fb5d9cb19b2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fiotest/autotest.sh is a I/O integrity test, so negative cases
should belond to a separate script file
Change-Id: Ie0728ce1eadba9687d1f40b3fdfb26c50ab34055
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413643
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While here, don't print out empty performance data if the
test run failed (for example, if no bdevs were found). Also
remove superfluous "done" message at the end of main - it
really serves no purpose and looks silly especially if the
test failed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19c678bee9079f6aa453a4b925819a5ea27f6534
Reviewed-on: https://review.gerrithub.io/414064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The qpair mask can be used instead.
Change-Id: I9063e656c7c44663dc96adfd5ef52a5a1065d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of scanning a list of all qpairs, use a bit
mask to determine if the requested QID is unique.
This is not for performance reasons, but because
eventually the ctrlr's list of qpairs is going to
need to go away.
Change-Id: Ic25ee60e4f9cd9d596815719760d5be892f29d0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be used in other transports as well.
Change-Id: I05026b0dfea2647d61a173379aca368ca48a2f52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I6182eb3a77d23db7088703492d71349e3a4b6460
Reviewed-on: https://review.gerrithub.io/399366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test is now working reliably after commit 392f3ef589 ("test/nvmf:
fix waitforblk usage in multiconnection").
Change-Id: I15c790b01df8c8204b6c389cf8d381e10ee54fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost-blk readonly "config-ro" option was
removed from Qemu arguments after merging
pull request f67c9b693a into Qemu master.
"config-ro" Qemu option needs to be removed
from scripts in order for tests to pass.
Nightly test for read-only feature has to be
commented out until Qemu is updated on test
servers.
Change-Id: I0cdc9c2fd3b23ef77a63b54e280e1bb9500229ee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This one is actually a bit tough to deduce in the specification.
The NVMe-oF spec says that QID errors detected in the RDMA
transport shall return an RDMA-specific error indicating
the problem. However, our code doesn't detect the error in
RDMA-specific code, and it isn't clear if the language is
a "must" or a "should".
The NVMe specification does clearly indicate what error
to return on invalid QID in response to a Create
I/O Queue Pair command. For now, return that while
we game plan whether we need to call into the RDMA
transport to correctly report this error.
Change-Id: I7faf37bad9b9202bc50a906214a51c17e4808fc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch does a little cleanup of SPDK SCSI layer APIs.
spdk_scsi_task_alloc_data() is only used in spdk_scsi_task_scatter_data().
spck_scsi_task_free_data() is only used in spdk_scsi_task_put().
The latter was called in UT code but this can be removed without any
degradation.
SPDK SCSI layer is relatively matured and these will not be used
out of lib/scsi/task.c.
Additionally memory leak detected by ASAN is fixed in this patch.
Change-Id: I8eff7b4dbfc307c211087734649a9b9b10555f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
int16_t is not used in SPDK yet. Hence add decode function only
for uint16_t.
Change-Id: I86f86a6768d95896d1840370f2d176c770c41418
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds option to disable pci access in spdk_vhost_run function.
This is particularly required in vhost live migration tc2 & tc3
Change-Id: I5ec215d316b97dbabd1297856d8f2dfbf7b9d3cb
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I862a7eb89d6357c85285d2a6cd90ad9f633d2435
Reviewed-on: https://review.gerrithub.io/413285
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This reduces submission+completion time by 10-15
core clocks per IO on an Intel Xeon Platinum
processor. Similar improvements should be seen
on other processors as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3241ba53ef5f21a8eef930b523a951525922e6b8
Reviewed-on: https://review.gerrithub.io/413284
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The subsystems created in this test only have one namespace, not 10;
wait for just nvme0n1, nvme1n1, etc. instead of trying to wait for
nvme0n1, nvme0n2, nvme0n3..., which will time out and fail.
Change-Id: I2d131e9b92c9c89a5dc8fe0cf9138b980f810233
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/413056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The check_io function always calls spdk_get_ticks() -
so return that value to the work_fn for checking
when the test is complete, rather than have work_fn
call spdk_get_ticks() again. This eliminates an
extra rdtsc call that counts against the completion
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a4f52eb2bec70a119c9ea7368bc7f2e8f17155c
Reviewed-on: https://review.gerrithub.io/413152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is an existing unmap "workload" but it is not a
real workload - it's just used as a type of verify
function to check if an unmapped region later returns
zeroes. This has typically been true for Intel NVMe SSDs
but is not universal, so this functionality is not really
useful. It's not used anywhere in any of the tests in the
SPDK tree either.
So replace it with a real "unmap" workload that will
do sequential unmap operations on the underlying
bdev. A future enhancement could make these unmap
operations random across the bdev - but that can be
added later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99d7c2d455fb5c3c87712a5bbfd890d257630f88
Reviewed-on: https://review.gerrithub.io/413151
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The Intel SDM clearly states that only an lfence (not
an mfence) is needed to ensure rdtsc is executed before
subsequent instructions. So change spdk_mb calls
to spdk_rmb to avoid overhead related to the unneeded
part of the fencing operation. This provides a more
accurate view of the overhead of both the SPDK and
kernel NVMe drivers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idaeb59db241cc1630e438e300559a02c4d59cd49
Reviewed-on: https://review.gerrithub.io/413148
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A recently-added test now uses a controller option value that was
previously uninitialized. Set them to all zeroes to avoid a Valgrind
warning about using uninitialized data.
Change-Id: I4454b781b7aec27e6d4f4dd8ff5cb059270551e9
Fixes: fbf06aca1a ("nvme: fail when request is too long")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413017
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
to clear nvmf subsystem.
Change-Id: I0bc33a3edf62b8248b9b6b33fa33be59ea400868
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/412941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fail when number of child requests is >= NVME_MAX_CHILD_REQUESTS.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8c370053847c9f623b861137da8d2387a66fc030
Reviewed-on: https://review.gerrithub.io/408850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec says that Identify Namespace should return a zero filled
data structure for namespaces that aren't active, rather than failing
the command with a status code of Invalid Namespace or Format.
Change-Id: Ia9156477d8701694f8b295a67e1669fd09e2cb62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use RPC instead
Change-Id: Iaab3d989b7efa687dd8aa1f9fea3ba720499b658
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Json configuration can be loaded by adding parameter --json-path=PATH.
Also spdk_vhost_run can be launched without initial config file.
New JSON RPC call "load_subsystem_config" for loading subsystem
config.
Change-Id: I4e71da99ea574484cba7e0d29b87cbc0b41e5ce6
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411460
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This brings DPDK 18.05 support and introduces
dynamic hugepage memory allocation.
The following is now possible:
./spdk_tgt -s 32
rpc.py construct_malloc_bdev 128 512
or even:
./spdk_tgt -s 0
Note that if no -s param is given, DPDK will still
allocate all available hugepage memory.
This has been tested with DPDK 18.05-rc6.
Fixes#281
Change-Id: Ic9521484c2871eb5b2a56445f1177f305b147707
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test has been causing intermittent failures for some time:
nvme_rdma.c: 221:nvme_rdma_get_event: *ERROR*: Expected
RDMA_CM_EVENT_ESTABLISHED but received RDMA_CM_EVENT_UNREACHABLE (7)
from CM event channel (status = -110)
Disable it until we find a reliable way to avoid this issue.
Change-Id: Id8f767bfa26a6a14f94cf4f7ff69b3ac0f11d88d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410489
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The upstream project has been renamed to PMDK.
Change-Id: I9bb0200d2cbf1e94c464017587b7bf0847ac0bfa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix in scripts that use BASE_DIR variable
that is redefined in common.sh.
Change-Id: Ie4ad9fb85f0042d274738f19b0d4696b2056efda
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/411833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abort is not currently implemented, since spdk_nvmf_qpair_get_request()
always returns NULL, but this will allow it to be implemented in a
thread-safe way.
Change-Id: I6dfd1ee50848deed0f4a2667aad5a811d8dd4ca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icc8aeb642d31b5c031c90855b33913bf886cefe8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I26e9d1e86c93f0b96b5bff7c9af5a453199c3e29
Reviewed-on: https://review.gerrithub.io/408138
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib999d3f082f5d632cb1aaf089504d0cd48e77539
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408696
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes a number of things much simpler and eliminates
the need for upcoming proposed reset handling.
Change-Id: I23a6badd0873f6dcf38ba1e55bf18d846c2843df
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407357
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This package has been renamed to reflect the new upstream project name.
Change-Id: I71f6bfaf36fb1fe7dc4cb050e3d7faad1097994e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411781
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I923c808affabdb97a5237b76f9f5534d6fb41601
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/411048
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is to support older versions of pmap (specifically procps v 3.2.8
which ships with centOS 6) which don't support the -p and -X options.
Change-Id: Ic8d4b94985c165e8bf224204af48b5d856aa2403
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/411755
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change print statement syntax and subprocess calls as well as some list
comprehension syntax.
Change-Id: Iebdea5f06be963e7f04af4df352aacef9b31a8eb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a simple example for spdk_vhost_nvme_controller_construct
and spdk_vhost_nvme_dev_construct functions.
Change-Id: I38415a7f4b28faf071a74e9b87d141da78e43368
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Missed to add object_begin to dump for portal group.
key of lun in luns is different between dump and load.
Change-Id: I16b95596478e0e4430c7186aa077bd107e375a93
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Python3 does not support the "except Exception, name:" syntax used in
test_cases.py
Change-Id: Ie90888d715c97c94c7686b797d955df2ead61915
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410937
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It doesn't represent an io_channel, so lets
rename it to something less confusing.
Change-Id: I730eb0ff0eb7737a59c190812a25b327ccd8fc14
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409998
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit adds a simple hello world example that writes the string
"Hello World!" to a bdev. The example can be used on a block device
such as Malloc or virtual bdev such as the passthru vbdev. The
sample bdev.conf configuration file includes a configuration for 2
malloc bdevs and one passthru bdev on top of Malloc0.
Change-Id: I1414183e3ddfac988ef61f24b8271653ac57e7c1
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/407220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
